Download or read book Laser Techniques for the Study of Electrode Processes written by Gyözö G. Láng and published by Springer Science & Business Media. This book was released on 2012-04-23 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser-enabled measurements are valuable tools for the investigation of surfaces and interfaces or for the in situ investigation of interfacial processes including electrode processes. The understanding of the thermodynamics of solid/liquid surfaces is important for surface science and electrochemistry. In the first part of this book, the authors describe a range of techniques for investigating interfacial tension and surface stress, which is important for coatings, thin films, and fuel cells. The techniques covered comprise bending beam (bending plate, bending cantilever, wafer curvature) methods with different detection techniques. Special attention is given to methods using optical detection by laser beam deflection or interferometry. The second part is devoted to the techniques based on the detection of refractive index gradients in the solution. The refractive index changes could be related to concentration gradients (Probe Beam Deflection, PBD) or light-induced thermal gradients (Photothermal Deflection Spectroscopy, PDS). The application of the techniques to surface-confined and solution electrochemical systems is described. Subsequently, a comparison with others techniques able to monitor ion fluxes is performed.
Download or read book Electrode Materials for Energy Storage and Conversion written by Mesfin A. Kebede and published by CRC Press. This book was released on 2021-11-17 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the latest developments and materials used in electrochemical energy storage and conversion devices, including lithium-ion batteries, sodium-ion batteries, zinc-ion batteries, supercapacitors and conversion materials for solar and fuel cells. Chapters introduce the technologies behind each material, in addition to the fundamental principles of the devices, and their wider impact and contribution to the field. This book will be an ideal reference for researchers and individuals working in industries based on energy storage and conversion technologies across physics, chemistry and engineering. FEATURES Edited by established authorities, with chapter contributions from subject-area specialists Provides a comprehensive review of the field Up to date with the latest developments and research Editors Dr. Mesfin A. Kebede obtained his PhD in Metallurgical Engineering from Inha University, South Korea. He is now a principal research scientist at Energy Centre of Council for Scientific and Industrial Research (CSIR), South Africa. He was previously an assistant professor in the Department of Applied Physics and Materials Science at Hawassa University, Ethiopia. His extensive research experience covers the use of electrode materials for energy storage and energy conversion. Prof. Fabian I. Ezema is a professor at the University of Nigeria, Nsukka. He obtained his PhD in Physics and Astronomy from University of Nigeria, Nsukka. His research focuses on several areas of materials science with an emphasis on energy applications, specifically electrode materials for energy conversion and storage.
Download or read book Laser Electrochemistry of Intermediates written by Victor A. Benderskii and published by CRC Press. This book was released on 1995-05-24 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser photoelectron emission not only allows investigation of interfaces between electrodes and solution, but also provides a method for fast generation of intermediate species in the vicinity of the interface and so permits study of their electrode reactions. Laser Electrochemistry of Intermediates presents the first-ever comprehensive review of this important phenomenon and its electrochemical applications. The book explores how the innovative method of laser electron emission from metal electrodes resolves two fundamental problems inherent in current methods of intermediate species (IS) generation and detection: difficulty generating IS quickly in the vicinity of the electrode surface and low IS surface concentration. In addition, for the first time, quasi-free and solvated electrons, hydrogen atoms, simple organic and inorganic radicals, and ions with anomalous valence are systematically studied. Laser Electrochemistry of Intermediates incorporates a unique, two-pronged analytical approach. First, the authors consider the kinetics and thermodynamics of the processes based on the participation of IS in its one-electron stages, thus allowing the assignment of real physical meaning to the electrochemical measurables. Second, they consider electrode reactions side by side with homogeneous reactions of electron transfer, facilitating understanding of the universal theory of electron transfer reactions in polar media as well as the peculiarities of these reactions occurring in the interface between electrode and solution.
Download or read book Handbook of Electrochemistry written by Cynthia G. Zoski and published by Elsevier. This book was released on 2007-02-07 with total page 935 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrochemistry plays a key role in a broad range of research and applied areas including the exploration of new inorganic and organic compounds, biochemical and biological systems, corrosion, energy applications involving fuel cells and solar cells, and nanoscale investigations. The Handbook of Electrochemistry serves as a source of electrochemical information, providing details of experimental considerations, representative calculations, and illustrations of the possibilities available in electrochemical experimentation. The book is divided into five parts: Fundamentals, Laboratory Practical, Techniques, Applications, and Data. The first section covers the fundamentals of electrochemistry which are essential for everyone working in the field, presenting an overview of electrochemical conventions, terminology, fundamental equations, and electrochemical cells, experiments, literature, textbooks, and specialized books. Part 2 focuses on the different laboratory aspects of electrochemistry which is followed by a review of the various electrochemical techniques ranging from classical experiments to scanning electrochemical microscopy, electrogenerated chemiluminesence and spectroelectrochemistry. Applications of electrochemistry include electrode kinetic determinations, unique aspects of metal deposition, and electrochemistry in small places and at novel interfaces and these are detailed in Part 4. The remaining three chapters provide useful electrochemical data and information involving electrode potentials, diffusion coefficients, and methods used in measuring liquid junction potentials. * serves as a source of electrochemical information * includes useful electrochemical data and information involving electrode potentials, diffusion coefficients, and methods used in measuring liquid junction potentials * reviews electrochemical techniques (incl. scanning electrochemical microscopy, electrogenerated chemiluminesence and spectroelectrochemistry)
Download or read book Monitoring Interfacial Dynamics by Pulsed Laser Techniques Third Yearly Progress Report written by and published by . This book was released on 1991 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: Goal is to develop new optical methods for the study of dynamic processes at the electrode/electrolyte interface. In the past year, optical second harmonic generation was used for time resolved measurements of thallium electrodeposition on Cu(111). Other studies included the study of the photochemistry involved in a GaAs surface treatment known as photowashing, and the study of picosecond time resolved luminescence decays from GaAs in electrochemical environments (power dependent effects). 4 figs. (DLC).
Download or read book Monitoring Interfacial Dynamics by Pulsed Laser Techniques written by and published by . This book was released on 1991 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: Goal is to develop new optical methods for the study of dynamic processes at the electrode/electrolyte interface. In the past year, optical second harmonic generation was used for time resolved measurements of thallium electrodeposition on Cu(111). Other studies included the study of the photochemistry involved in a GaAs surface treatment known as photowashing, and the study of picosecond time resolved luminescence decays from GaAs in electrochemical environments (power dependent effects). 4 figs. (DLC).
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-06 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser induced Graphene written by Ruquan Ye and published by . This book was released on 2020-11-30 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: LIG is a revolutionary technique that uses a common CO2 infrared laser scriber, like the one used in any machine shop, for the direct conversion of polymers into porous graphene under ambient conditions. This technique combines the preparation and patterning of 3D graphene in a single step, without the use of wet chemicals. The ease in the structural engineering and excellent mechanical properties of the 3D graphene obtained have made LIG a versatile technique for applications across many fields. This book compiles cutting-edge research on LIG by different research groups all over the world. It discusses the strategies that have been developed to synthesize and engineer graphene, including controlling its properties such as porosity, composition, and surface characteristics. The authors are pioneers in the discovery and development of LIG and the book will appeal to anyone involved in nanotechnology, chemistry, environmental sciences, and device development, especially those with an interest in the synthesis and applications of graphene-based materials.
Download or read book Handbook of Laser Technology and Applications written by Chunlei Guo and published by CRC Press. This book was released on 2021-06-23 with total page 711 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook gives a fully updated guide to lasers and laser systems, including the complete range of their technical applications. The first volume outlines the fundamental components of lasers, their properties and working principles. The second volume gives exhaustive coverage of all major categories of lasers, from solid-state and semiconductor diode to fiber, waveguide, gas, chemical, and dye lasers. The third volume covers modern applications in engineering and technology, including all new and updated case studies spanning telecommunications and data storage to medicine, optical measurement, defense and security, nanomaterials processing and characterization.
Download or read book Handbook of Laser Technology and Applications Three Volume Set written by Colin Webb and published by CRC Press. This book was released on 2003-12-01 with total page 2779 pages. Available in PDF, EPUB and Kindle. Book excerpt: The invention of the laser was one of the towering achievements of the twentieth century. At the opening of the twenty-first century we are witnessing the burgeoning of the myriad technical innovations to which that invention has led. The Handbook of Laser Technology and Applications is a practical and long-lasting reference source for scientists a
Download or read book Machine Learning Applications in Non Conventional Machining Processes written by Bose, Goutam Kumar and published by IGI Global. This book was released on 2021-02-05 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditional machining has many limitations in today’s technology-driven world, which has caused industrial professionals to begin implementing various optimization techniques within their machining processes. The application of methods including machine learning and genetic algorithms has recently transformed the manufacturing industry and created countless opportunities in non-traditional machining methods. Significant research in this area, however, is still considerably lacking. Machine Learning Applications in Non-Conventional Machining Processes is a collection of innovative research on the advancement of intelligent technology in industrial environments and its applications within the manufacturing field. While highlighting topics including evolutionary algorithms, micro-machining, and artificial neural networks, this book is ideally designed for researchers, academicians, engineers, managers, developers, practitioners, industrialists, and students seeking current research on intelligence-based machining processes in today’s technology-driven market.
Download or read book Bibliography on Welding Methods with Indexes written by United States. National Aeronautics and Space Administration. Technology Utilization Division and published by . This book was released on 1966 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Laser Technology and Applications Laser design and laser systems written by Colin E. Webb and published by CRC Press. This book was released on 2004 with total page 1282 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Efficiency Crystalline Silicon Solar Cells written by Eun-Chel Cho and published by MDPI. This book was released on 2021-01-06 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is composed of 6 papers. The first paper reports a novel technique for the selective emitter formation by controlling the surface morphology of Si wafers. Selective emitter (SE) technology has attracted renewed attention in the Si solar cell industry to achieve an improved conversion efficiency of passivated-emitter rear-contact (PERC) cells. In the second paper, the temperature dependence of the parameters was compared through the PERC of the industrial-scale solar cells. As a result of their analysis, PERC cells showed different temperature dependence for the fill factor loss as temperatures rose. The third paper reports the effects of carrier selective front contact layer and defect state of hydrogenated amorphous silicon passivation layer/n-type crystalline silicon interface. The results demonstrated the effects of band offset determined by band bending at the interface of the passivation layer and carrier selective front contact layer. In addition, the nc-SiOx: H CSFC layer not only reduces parasitic absorption loss but also has a tunneling effect and field-effect passivation. The fourth paper reports excimer laser annealing of hydrogenated amorphous silicon film for TOPCon solar cell application. This paper analyzes the crystallization of a-Si:H via excimer laser annealing (ELA) and compared this process with conventional thermal annealing. The fifth paper reports the contact mechanism between Ag–Al and Si and the change in contact resistance (Rc) by varying the firing profile. Rc was measured by varying the belt speed and peak temperature of the fast-firing furnace. The sixth paper reports a silicon tandem heterojunction solar cell based on a ZnO/Cu2O subcell and a c-Si bottom subcell using electro-optical numerical modeling. The buffer layer affinity and mobility together with a low conduction band offset for the heterojunction are discussed, as well as spectral properties of the device model.
Download or read book Additive Manufacturing written by Emrah Celik and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-07-06 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers additive manufacturing of polymers, metals, ceramics, fiber reinforced polymer composites, energy harvesting materials, and biomaterials. Hybrid manufacturing is discussed. Topology optimization methodology is described and finite element software examples are provided. The book is ideal for graduate students and career starters in the industry.
Download or read book In Situ Monitoring of Electrode Processes by Laser Raman Scattering written by and published by . This book was released on 1982 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
