Download or read book Surface Hardening of Steels written by Joseph R. Davis and published by ASM International. This book was released on 2002-01-01 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation A practical selection guide to help engineers and technicians choose the mot efficient surface hardening techniques that offer consistent and repeatable results. Emphasis is placed on characteristics such as processing temperature, case/coating thickness, bond strength, and hardness level obtained. The advantages and limitations of the various thermochemical, thermal and coating/surface modification technologies are compared
Download or read book Laser Surface Hardening written by Janez Grum and published by . This book was released on 2002 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Surface Hardening of Steels written by and published by . This book was released on 1984 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: Study of the laser hardening response of AISI 01, AISI 4340, carburized AISI 1020, and carburized AISI 9310 steels in various prior heat treatment conditions. The laser operating parameter combinations are established to produce maximum hardened case depths without surface melting.
Download or read book Laser Surface Treatments for Tribological Applications written by Jeyaprakash Natarajan and published by Bentham Science Publishers. This book was released on 2021-11-22 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference presents comprehensive information about laser surface treatments for tribological applications. Chapters of the book highlight the importance of laser technology in modifying materials to optimize the effects of friction and lubrication, by explaining a range of surface modification methods used in industries. These methods include hardening, melting, alloying, cladding and texturing. The knowledge in the book is intended to give an in-depth understanding about the role of laser technology in tribology and the manufacture of industrial materials and surfaces for special applications. Key Features: - 10 chapters on topics relevant to tribology and industrial applications of laser material processing - Comprehensively covers laser surface modification of metals and alloys - Explains a wide range of surface modification methods (hardening, melting, alloying, cladding and texturing) - Covers material and tribological characterization of surfaces - Presents information in a simple structured layout for easy reading, with introductory notes for learners - Provides references for further reading This book is an ideal reference for students and learners in courses related to engineering, manufacturing and materials science. Researchers, industrial professionals and general readers interested in laser assisted machining processes and surface modification techniques will also find the book to be an informative reference on the subject.
Download or read book Laser Surface Engineering written by Jonathan R. Lawrence and published by Elsevier. This book was released on 2014-10-02 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lasers can alter the surface composition and properties of materials in a highly controllable way, which makes them efficient and cost-effective tools for surface engineering. This book provides an overview of the different techniques, the laser-material interactions and the advantages and disadvantages for different applications. Part one looks at laser heat treatment, part two covers laser additive manufacturing such as laser-enhanced electroplating, and part three discusses laser micromachining, structuring and surface modification. Chemical and biological applications of laser surface engineering are explored in part four, including ways to improve the surface corrosion properties of metals. - Provides an overview of thermal surface treatments using lasers, including the treatment of steels, light metal alloys, polycrystalline silicon and technical ceramics - Addresses the development of new metallic materials, innovations in laser cladding and direct metal deposition, and the fabrication of tuneable micro- and nano-scale surface structures - Chapters also cover laser structuring, surface modification, and the chemical and biological applications of laser surface engineering
Download or read book Local Case hardening of Steel by Laser Radiation written by V. F. Brekhovskikh and published by . This book was released on 1969 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: The hardening of steel in the zone of action of focused radiation from a laser in the free-generation mode and with modulated-Q is considered. The maximum extent of the hardened areas is estimated, taking into account the characteristics of the laser radiation. The heating and cooling rates of the material were determined theoretically. The surface hardening of metal products is of much interest in machine design. A great many methods of surface hardening of metals are known: high-frequency current hardening, volume hardening of PP (low-annealing) steels, volume hardening of cemented and nitro-cemented items, etc. With the exception of the electron beam all other methods of surface hardening do not permit obtaining case-hardening of micro-regions to a depth of some tens or hundreds of microns. However, use of an electron beam is not always warranted due to the high cost of the equipment and the requirement for placing the item being treated in a vacuum. Experiments have shown that after laser treatment of the surfaces of U8, 45, KhVG and other steels, the micro-hardness in the treatment zone is increased from 300-400 up to 900-1000 kg/sq mm, and in certain cases to 2200 kg/sq mm. In this connection it is of interest to discuss some aspects of the possible use of laser radiation for the thermal treatment of steels and alloys. The paper analyzes some experimental data on the surface hardening of a number of steels and theoretical estimates are made of the dimensions of the regions of hardening obtained after irradiation by a laser. (Author).
Download or read book Metallurgy for the Non Metallurgist Second Edition written by Arthur C. Reardon and published by ASM International. This book was released on 2011-01-01 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: The completely revised Second Edition of Metallurgy for the Non-Metallurgist provides a solid understanding of the basic principles and current practices of metallurgy. This major new edition is for anyone who uses, makes, buys or tests metal products. For both beginners and others seeking a basic refresher, the new Second Edition of the popular Metallurgy for the Non-Metallurgist gives an all-new modern view on the basic principles and practices of metallurgy. This new edition is extensively updated with broader coverage of topics, new and improved illustrations, and more explanation of basic concepts. Why are cast irons so suitable for casting? Do some nonferrous alloys respond to heat treatment like steels? Why is corrosion so pernicious? These are questions that can be answered in this updated reference with many new illustrations, examples, and descriptions of basic metallurgy.
Download or read book Surface Engineering for Corrosion and Wear Resistance written by J. R. Davis and published by ASM International. This book was released on 2001-01-01 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers are faced with a bewildering array of choices when selecting a surface treatment for a specific corrosion or wear application. This book provides practical information to help them select the best possible treatment. An entire chapter is devoted to process comparisons, and dozens of useful tables and figures compare surface treatment thickness and hardness ranges; abrasion and corrosion resistance; processing time, temperature, and pressure; costs; distortion tendencies; and other critical process factors and coating characteristics. The chapter Practical Guidelines for Surface Engin.
Download or read book Advanced Manufacturing Processes III written by Volodymyr Tonkonogyi and published by Springer Nature. This book was released on 2021-11-17 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers a wide range of manufacturing processes, such as grinding, boring, milling, turning, woodworking, coatings, including additive manufacturing. It focuses on laser, ultrasonic, and combined laser–ultrasonic hardening treatments, and dispersion hardening. It describes tribology and functional analysis of coatings, separation, purification and filtration processes, as well as ecological recirculation and electrohydraulic activation, highlighting the growing role of digital twins, optimization and lifecycle management methods, and quality inspection processes. It also covers cutting-edge heat and mass transfer technologies and energy management methods. Gathering the best papers presented at the 3rd Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2021), held in Odessa, Ukraine, on September 7–10, 2021, this book offers a timely overview and extensive information on trends and technologies in manufacturing, mechanical, and materials engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and to offer a bridge between academic and industrial researchers.
Download or read book Steel and Its Heat Treatment written by Karl-Erik Thelning and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel and its Heat Treatment: Bofors Handbook describes the fundamental metallographic concepts, materials testing, hardenability, heat treatment, and dimensional changes that occur during the hardening and tempering stages of steel. The book explains the boundaries separating the grain contents of steel, which are the low-angle grain boundaries, the high-angle grain boundaries, and the twinning boundaries. Engineers can determine the hardenability of steel through the Grossman test or the Jominy End-Quench test. Special hardening and tempering methods are employed for steel that are going to be fabricated into tools. The different methods of hardening are manual hardening for a small surface (the tip of a screw); spin hardening for objects with a rotational symmetry (gears with 5 modules or less); and progressive hardening (or a combination with spin hardening) for flat surfaces. The hardening and tempering processes cause changes in size and shape of the substance. The text presents examples of dimensional changes during the hardening and tempering of tool steels such as those occurring in plain-carbon steels and low-alloy steels. The book is a source of reliable information needed by engineers, tool and small equipment designers, as well as by metallurgists, structural, and mechanical engineers.
Download or read book Industrial Applications of Lasers written by John F. Ready and published by Elsevier. This book was released on 1997-04-25 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical book with a variety of uses, this book can help applications engineers spark problem-solving techniques through the use of lasers. Industrial Application of Lasers, Second Edition takes the reader through laser fundamentals, unusual properties of laser light, types of practical lasers available, and commonly used accessory equipment. The book also applies this information to existing and developing applications. Current uses of lasers, including laser welding and cutting, electronic fabrication techniques, lightwave communications, laser-based applications in alignment, surveying, and metrology are all covered as well as discussing the potential for future applications such as all-optical computers,remote environmental monitoring, and laser-assisted thermonuclear fusion. - Explains basic laser fundamentals as well as emphasizing how lasers are used for real applications in industry - Describes the importance of laser safety - Discusses potentially important future applications such as remote environmental monitoring - Includes rare expert lore and opinion
Download or read book Laser Material Processing written by William M. Steen and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: New chapters on bending and cleaning reflect the changes in the field since the last edition, completing the range of practical knowledge about the processes possible with lasers already familiar to users of this well-known text. Professor Steen's lively presentation is supported by a number of original cartoons by Patrick Wright and Noel Ford, which will bring a smile to your face and ease the learning process. From the reviews: "...well organized, and the text is very practical...The engineering community will find this book informative and useful." (OPTICS AND PHOTONICS NEWS, July/August 2005)
Download or read book Surface Hardening of Steels by Laser and Electron Beam written by Materials Information (Firm) and published by . This book was released on 1987 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book History Developments and Trends in the Heat Treatment of Steel written by Peter Jurči and published by MDPI. This book was released on 2021-03-01 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steels and their heat treatment are still very important in modern industry because most industrial components are made from these materials. The proper choice of steel grades along with their suitable processing makes it possible to reduce the weight of the components, which is closely related to energy and fuel savings. This has decisive importance in branches such as the automotive, transport, consumer industries. A great number of novel heat- and surface-treatment techniques have been developed over the past three decades. These techniques involve, for example, vacuum treatment, sub-zero treatment, laser/electron beam surface hardening and alloying, low-pressure carburizing and nitriding, and physical vapour deposition. This Special Issue contains a collection of original research articles on not only advanced heat-treatment techniques—carburizing and sub-zero treatments—but also on the microstructure–property relationships in different ferrous alloys.
Download or read book Failure Analysis of Heat Treated Steel Components written by Lauralice de Campos Franceschini Canale and published by ASM International. This book was released on 2008 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Surface Modification of Alloys for Corrosion and Erosion Resistance written by C T Kwok and published by Elsevier. This book was released on 2012-03-20 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion and erosion processes often occur synergistically to cause serious damage to metal alloys. Laser surface modification techniques such as laser surface melting or alloying are being increasingly used to treat surfaces to prevent corrosion or repair corroded or damaged components. Laser surface modification of alloys for corrosion and erosion resistance reviews the wealth of recent research on these important techniques and their applications.After an introductory overview, part one reviews the use of laser surface melting and other techniques to improve the corrosion resistance of stainless and other steels as well as nickel-titanium and a range of other alloys. Part two covers the use of laser surface modification to prevent different types of erosion, including liquid impingement, slurry (solid particle) and electrical erosion as well as laser remanufacturing of damaged components.With its distinguished editor and international team of contributors, Laser surface modification of alloys for corrosion and erosion resistance is a standard reference for all those concerned with preventing corrosion and erosion damage in metallic components in sectors as diverse as energy production and electrical engineering. - Reviews recent research on the use of laser surface modification techniques, including the prevention of corrosion and repair of corroded or damaged components - Discusses the techniques for improving the corrosion resistance of steels, nickel-titanium and a range of alloys - Analyses the use of laser surface modification to prevent different types of erosion, including liquid impingement and laser remanufacturing of damaged components
Download or read book Laser Processing of Engineering Materials written by John Ion and published by Elsevier. This book was released on 2005-03-22 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complete guide to understanding and using lasers in material processing!Lasers are now an integral part of modern society, providing extraordinary opportunities for innovation in an ever-widening range of material processing and manufacturing applications. The study of laser material processing is a core element of many materials and manufacturing courses at undergraduate and postgraduate level. As a consequence, there is now a vast amount of research on the theory and application of lasers to be absorbed by students, industrial researchers, practising engineers and production managers. Written by an acknowledged expert in the field with over twenty years' experience in laser processing, John Ion distils cutting-edge information and research into a single key text. Essential for anyone studying or working with lasers, Laser Processing of Engineering Materials provides a clear explanation of the underlying principles, including physics, chemistry and materials science, along with a framework of available laser processes and their distinguishing features and variables. This book delivers the knowledge needed to understand and apply lasers to the processing of engineering materials, and is highly recommended as a valuable guide to this revolutionary manufacturing technology. The first single volume text that treats this core engineering subject in a systematic manner Covers the principles, practice and application of lasers in all contemporary industrial processes; packed with examples, materials data and analysis, and modelling techniques
