Download or read book Laser Metrology and Machine Performance III written by D. G. Ford and published by Computational Mechanics. This book was released on 1997 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents the latest technology for assessing the performance of machine tools, coordinate measuring machines and robotics. It also details procedures involving international calibration, certification and standardization, and introduces the gear and transmission metrology section.
Download or read book Laser Metrology and Machine Performance V written by G. N. Peggs and published by Computational Mechanics. This book was released on 2001 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reporting on the latest international standards, calibration and certification procedures, this volume contains the official proceedings of the Fifth International Conference on Laser Metrology, Machine Tool, CMM and Robot Performance. Areas highlighted include: machine tool condition monitoring and calibration; co-ordination of metrology and its application to manufacturing performance and industrial inspection; new techniques in performance assessment and verification; numerical and computational tools.
Download or read book Laser Metrology and Machine Performance written by D. M. S. Blackshaw and published by . This book was released on 1993 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited proceedings of the First International Symposium on [title], held in Southampton, UK, July 1993, to present the latest technology for assessing and enhancing machine tool performance and to promote the interaction between research groups and users. Following two keynote lectures, the volume is divided into eight sections covering international calibration standards, machine performance monitoring, quality in machine tool performance, laser interferometry, metrological inspection, machine calibration using artifacts, cutting tool technology, and machine tool design. No index. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Laser Metrology and Machine Performance IV written by Vic Chiles and published by . This book was released on 1999 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of papers from the Fourth International Conference on Laser Metrology and Machine Performance reflects the growing emphasis on engineering performance of surfaces. There is also coverage of research efforts involving thermal errors on machine tools. Developments in ISO standards also continue to be highlighted. The papers come from acknowledged experts working in industry, research establishments and academia in many countries, and cover the following topical areas: calibration systems; condition monitoring; machine tool standards; thermal errors of machine tools; hexapod calibration; gear measurement; surface measurements; machine tool errors; machine tool measurement systems and machine tool performance.
Download or read book Handbook of Condition Monitoring written by B. K. N. Rao and published by Elsevier. This book was released on 1996 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardbound. The need to reduce costs has generated a greater interest in condition monitoring in recent years. The Handbook of Condition Monitoring gives an extensive description of available products and their usage making it a source of practical guidance supported by basic theory.This handbook has been designed to assist individuals within companies in the methods and devices used to monitor the condition of machinery and products.
Download or read book Proceedings of the 37th International MATADOR Conference written by Srichand Hinduja and published by Springer Science & Business Media. This book was released on 2012-10-08 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented here are 97 refereed papers given at the 37th MATADOR Conference held at The University of Manchester in July 2012. The MATADOR series of conferences covers the topics of Manufacturing Automation and Systems Technology, Applications, Design, Organisation and Management, and Research. The Proceedings of this Conference contain original papers contributed by researchers from many countries on different continents. The papers cover the principles, techniques and applications in aerospace, automotive, biomedical, energy, consumable goods and process industries. The papers in this volume reflect: the importance of manufacturing to international wealth creation; the emerging fields of micro- and nano-manufacture; the increasing trend towards the fabrication of parts using lasers; the growing demand for precision engineering and part inspection techniques, and the changing trends in manufacturing within a global environment.
Download or read book Laser Metrology and Machine Performance XIII written by Liam Blunt and published by . This book was released on 2019 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Algorithms for Approximation written by Armin Iske and published by Springer Science & Business Media. This book was released on 2006-12-13 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approximation methods are vital in many challenging applications of computational science and engineering. This is a collection of papers from world experts in a broad variety of relevant applications, including pattern recognition, machine learning, multiscale modelling of fluid flow, metrology, geometric modelling, tomography, signal and image processing. It documents recent theoretical developments which have lead to new trends in approximation, it gives important computational aspects and multidisciplinary applications, thus making it a perfect fit for graduate students and researchers in science and engineering who wish to understand and develop numerical algorithms for the solution of their specific problems. An important feature of the book is that it brings together modern methods from statistics, mathematical modelling and numerical simulation for the solution of relevant problems, with a wide range of inherent scales. Contributions of industrial mathematicians, including representatives from Microsoft and Schlumberger, foster the transfer of the latest approximation methods to real-world applications.
Download or read book Parallel Kinematic Machines written by C.R. Boer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel Kinematic Machines (PKMs) are one of the most radical innovations in production equipment. They attempt to combine the dexterity of robots with the accuracy of machine tools to respond to several industrial needs. This book contains the proceedings of the first European-American Forum on Parallel Kinematic Machines, held in Milan, Italy from 31 August - 1 September 1998. The Forum was established to provide institutions, technology suppliers and industrial end users with an improved understanding of the real advantages to be gained from using PKMs. This book contributes to a mid-term strategy oriented to reduce time to market and costs, improve production flexibility and minimize environmental impacts to increase worldwide competitiveness. In particular the authors focus on enabling technologies and emerging concepts for future manufacturing applications of PKMs. Topics include: Current status of PKM R&D in Europe, the USA and Asia. Industrial requirements, roadblocks and application opportunities. Research issues and possibilities. Industrial applications and requirements.
Download or read book Coordinate Metrology written by Jerzy A. Sładek and published by Springer. This book was released on 2015-12-22 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on effective methods for assessing the accuracy of both coordinate measuring systems and coordinate measurements. It mainly reports on original research work conducted by Sladek’s team at Cracow University of Technology’s Laboratory of Coordinate Metrology. The book describes the implementation of different methods, including artificial neural networks, the Matrix Method, the Monte Carlo method and the virtual CMM (Coordinate Measuring Machine), and demonstrates how these methods can be effectively used in practice to gauge the accuracy of coordinate measurements. Moreover, the book includes an introduction to the theory of measurement uncertainty and to key techniques for assessing measurement accuracy. All methods and tools are presented in detail, using suitable mathematical formulations and illustrated with numerous examples. The book fills an important gap in the literature, providing readers with an advanced text on a topic that has been rapidly developing in recent years. The book is intended for master and PhD students, as well as for metrology engineers working at industrial and research laboratories. It not only provides them with a solid background for using existing coordinate metrology methods; it is also meant to inspire them to develop the state-of-the-art technologies that will play an important role in supporting quality growth and innovation in advanced manufacturing.
Download or read book Machining Dynamics and Parameters Process Optimization written by Gorka Urbicain and published by MDPI. This book was released on 2021-03-19 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: As we move further into the 21st century, despite the fact that new technologies have emerged, machining remains the key operation to achieve high productivity and precision for high-added value parts in several sectors, but recent advances in computer applications should close the gap between simulations and industrial practices. This book, “Machining Dynamics and Parameters Process Optimization”, is oriented toward the different strategies and paths when it comes to increasing productivity and reliability in metal removal processes. The topics include the dynamic characterization of machine tools, experimental dampening techniques, and optimization algorithms combined with signal monitoring.
Download or read book Proceedings of the 36th International MATADOR Conference written by Srichand Hinduja and published by Springer Science & Business Media. This book was released on 2010-08-05 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented here are 130 refereed papers given at the 36th MATADOR Conference held at The University of Manchester in July 2010. The MATADOR series of conferences covers the topics of Manufacturing Automation and Systems Technology, Applications, Design, Organisation and Management, and Research. The proceedings of this Conference contain original papers contributed by researchers from many countries on different continents. The papers cover the principles, techniques and applications in aerospace, automotive, biomedical, energy, consumable goods and process industries. The papers in this volume reflect: • the importance of manufacturing to international wealth creation; • the emerging fields of micro- and nano-manufacture; • the increasing trend towards the fabrication of parts using lasers; • the growing demand for precision engineering and part inspection techniques; and • the changing trends in manufacturing within a global environment.
Download or read book Laser Metrology for Precision Measurement and Inspection in Industry written by Armando Albertazzi and published by SPIE-International Society for Optical Engineering. This book was released on 2001 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: "International Symposium on Laser Metrology for Precision Measurement and Inspection in Industry"--P. vii.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1992 with total page 1572 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technical Abstract Bulletin written by and published by . This book was released on with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Abrasive Technology IX written by Dong Ming Guo and published by Trans Tech Publications Ltd. This book was released on 2007-01-15 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a wealth of valuable up-to-date information for active researchers and engineers, and will certainly form a solid basis for any future research, in the field of abrasive technology, which is aimed at creating new and practical machine tools, systems and processes, or at identifying new characteristics.
Download or read book Research and Technology Program Digest Flash Index written by and published by . This book was released on 1967 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt:
