Download or read book Laser Metal Deposition of the Ti 5553 Alloy on Forged Substrate for Aerospace Applications written by Calumn Hicks and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Friction Stir Processing of Laser Metal Deposited Ti 6Al 4V written by Romy Francis and published by . This book was released on 2009 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Laser metal deposition (LMD) can form near net shaped components for aerospace applications. Ti-6Al-4V is a widely used aerospace alloy and fabrication of this alloy using LMD is gaining popularity. Improved mechanical properties are always a requirement in aerospace alloys and research is constantly being conducted to improve the properties of components formed from this alloy. Friction Stir Processing (FSP) in the past has been used as a method to change the surface properties of materials through microstructural modifications. The changes in properties can include hardness, corrosion resistance, fatigue strength, etc. The first section of this thesis is based on a similar concept to modify the surface properties of the laser deposited Ti-6Al-4V through FSP. Microstructural changes in the Ti-6Al-4V laser deposits due to FSP and subsequent laser deposition has been presented. The microstructure was characterized by the SEM and optical microscope. Variations in the microhardness inside the nugget region have also been discussed. The second section of the thesis proposes a methodology to create a fully forged, recrystallized structure by integrating the hybrid laser deposition system and FSP. Various FSP parameters investigated in attaining the same have been discussed. The effective nugget region which was left unaffected due to the subsequent single, double and triple layer laser deposition has also been presented"--Abstract, leaf iv.

Download or read book Laser Metal Deposition Process of Metals Alloys and Composite Materials written by Rasheedat Modupe Mahamood and published by Springer. This book was released on 2017-09-05 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the industrial potential and explains the physics behind laser metal deposition (LMD) technology. It describes the laser metal deposition (LMD) process with the help of numerous diagrams and photographs of real-world process situations, ranging from the fabrication of parts to the repair of existing products, and includes case studies from current research in this field. Consumer demand is moving away from standardized products to customized ones, and to remain competitive manufacturers require manufacturing processes that are flexible and able to meet consumer demand at low cost and on schedule. Laser metal deposition (LMD) is a promising alternative manufacturing process in this context. This book enables researchers and professionals in industry gain a better understanding of the LMD process, which they can then use in real-world applications. It also helps spur on further innovations.

Download or read book Synthesis CFD Simulation and Characterization of Direct Laser Metal Deposition LMD of Al Cu Ti Coatings on Ti 6Al 4V Alloy for Aerospace Application written by Adedoyin Michael Lasisi and published by . This book was released on 2020 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fabrication and Characterization of Advanced Materials Using Laser Metal Deposition from Elemental Powder Mixture written by Xueyang Chen and published by . This book was released on 2018 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Over the past decades of years, a great deal of money has been spent to machine large and complex parts from high-performance metals (i.e., titanium components for aerospace applications), so users attempt to circumvent the high cost of materials. Laser metal deposition (LMD) is an additive manufacturing technique capable of fabricating complicated structures with superior properties. This dissertation aims to improve the applications of LMD technique for manufacturing metallic components by using various elemental powder mixture according to the following three categories of research topics. The first research topic is to investigate and develop a cost-effective possibility by using elemental powder mixture for metallic components fabrication. Based on the studies of fabricating thin-wall Ti-6Al-4V using elemental powder mixture, comparative close particle number for Ti, Al and V powder could easily get industry qualified Ti-6Al-4V components. The particle number for each element in powder blends has been proved to be a key factor for composition control in the final deposit part. The second research topic focuses on the application improvements of elemental powder manufacturing. By fabricating Al[sub x]CoFeNiCu[sub 1−x] (x = 0.25, 0.5, 0.75) high entropy alloys from elemental powder based feedstocks, it enhances the usage of elemental powder to fabricate novel materials with complex compositions. The third research topic extends the applications of using elemental powder mixture to the broader area. A functionally gradient material (FGM) path is developed to successfully join titanium alloy with [gamma]-TiAl. This dissertation leads to new knowledge for the effective fabrication of unique and complex metallic components. Moreover, the research results of the dissertation could benefit a wide range of industries"--Abstract, page iv.

Download or read book Additive Manufacturing Laser Deposition of Ti 6Al 4V for Aerospace Repair Application written by Nanda Kumar Dey and published by . This book was released on 2014 with total page 59 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Parts or products machined from high performance metals are very expensive, partly due to the processing complexities during manufacturing. Therefore, many high performance metal parts users, such as the aerospace industry, mold/die casting industry, heavy machinery consumers etc., extend the service of these damaged parts by employing repair or remanufacturing technology. The research objective is to use laser deposition and machining processes to repair titanium parts. This thesis discusses a new way of approach for developing a repair process for Ti-6Al-4V for the aerospace industry using Laser Metal Deposition (LMD). The repairs were conducted in a multi-axis hybrid manufacturing systems in which the laser deposition and the machining processes are integrated. The study broadly included preparing the defects, laser deposition, machining, sample preparations and mechanical tests. Comparative study of mechanical properties (UTS, YS, percentage elongation) of the repaired samples to the ideal conditions was undertaken. The research throws up interesting facts where the data from the test sample shows enhancement of properties of the repaired part."--Abstract, page iv.

Download or read book Additive Manufacturing of Titanium Alloys written by Bhaskar Dutta and published by Butterworth-Heinemann. This book was released on 2016-06-17 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing of Titanium Alloys: State of the Art, Challenges and Opportunities provides alternative methods to the conventional approach for the fabrication of the majority of titanium components produced via the cast and wrought technique, a process which involves a considerable amount of expensive machining. In contrast, the Additive Manufacturing (AM) approach allows very close to final part configuration to be directly fabricated minimizing machining cost, while achieving mechanical properties at least at cast and wrought levels. In addition, the book offers the benefit of significant savings through better material utilization for parts with high buy-to-fly ratios (ratio of initial stock mass to final part mass before and after manufacturing). As titanium additive manufacturing has attracted considerable attention from both academicians and technologists, and has already led to many applications in aerospace and terrestrial systems, as well as in the medical industry, this book explores the unique shape making capabilities and attractive mechanical properties which make titanium an ideal material for the additive manufacturing industry. - Includes coverage of the fundamentals of microstructural evolution in titanium alloys - Introduces readers to the various Additive Manufacturing Technologies, such as Powder Bed Fusion (PBF) and Directed Energy Deposition (DED) - Looks at the future of Titanium Additive Manufacturing - Provides a complete review of the science, technology, and applications of Titanium Additive Manufacturing (AM)

Download or read book Laser Additive Manufacturing of High Performance Materials written by Dongdong Gu and published by Springer. This book was released on 2015-04-21 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book entitled “Laser Additive Manufacturing of High-Performance Materials” covers the specific aspects of laser additive manufacturing of high-performance new materials components based on an unconventional materials incremental manufacturing philosophy, in terms of materials design and preparation, process control and optimization and theories of physical and chemical metallurgy. This book describes the capabilities and characteristics of the development of new metallic materials components by laser additive manufacturing process, including nanostructured materials, in situ composite materials, particle reinforced metal matrix composites, etc. The topics presented in this book, similar as laser additive manufacturing technology itself, show a significant interdisciplinary feature, integrating laser technology, materials science, metallurgical engineering and mechanical engineering. This is a book for researchers, students, practicing engineers and manufacturing industry professionals interested in laser additive manufacturing and laser materials processing. Dongdong Gu is a Professor at College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics (NUAA), PR China.

Download or read book Metals for Biomedical Devices written by Mitsuo Niinomi and published by Elsevier. This book was released on 2010-03-31 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite recent advances in medical devices using other materials, metallic implants are still one of the most commercially significant sectors of the industry. Given the widespread use of metals in medical devices, it is vital that the fundamentals and behaviour of this material are understood. Metals in biomedical devices reviews the latest techniques in metal processing methods and the behaviour of this important material.Initial chapters review the current status and selection of metals for biomedical devices. Chapters in part two discuss the mechanical behaviour, degradation and testing of metals with specific chapters on corrosion, wear testing and biocompatibility of biomaterials. Part three covers the processing of metals for biomedical applications with chapters on such topics as forging metals and alloys, surface treatment, coatings and sterilisation. Chapters in the final section discuss clinical applications of metals such as cardiovascular, orthopaedic and new generation biomaterials.With its distinguished editor and team of expert contributors, Metals for biomedical devices is a standard reference for materials scientists, researchers and engineers working in the medical devices industry and academia. - Reviews the latest techniques in metal processing methods including surface treatment and sterilisation - Examines metal selection for biomedical devices considering biocompatibility of various metals - Assesses mechanical behaviour and testing of metals featuring corrosion, fatigue and wear

Download or read book Crystallographic Texture of Materials written by Satyam Suwas and published by Springer. This book was released on 2016-09-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a comprehensive and invaluable overview of the basics of crystallographic textures and their industrial applications, this book covers a broad range of both structural and functional materials. It introduces the existing methods of representation in an accessible manner and presents a thorough overview of existing knowledge on texture of metallic materials. Texture analysis has widespread use in many industries, and provides crucial input towards the development of new materials and products. There has been rapid growth in the science and art of texture analysis in the last few decades. Other topics addressed within this book include recent research on texture in thin films and non-metals, and the dependence of material properties on texture, and texture control in some engineering materials. This book constitutes an invaluable reference text for researchers and professionals working on texture analysis in metallurgy, materials science and engineering, physics and geology. By using content selectively, it is also highly accessible to undergraduate students.

Download or read book Nickel Cobalt and Their Alloys written by Joseph R. Davis and published by ASM International. This book was released on 2000-01-01 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive guide to the compositions, properties, processing, performance, and applications of nickel, cobalt, and their alloys. It includes all of the essential information contained in the ASM Handbook series, as well as new or updated coverage in many areas in the nickel, cobalt, and related industries.

Download or read book Advances in Manufacturing and Industrial Engineering written by Ranganath M. Singari and published by Springer Nature. This book was released on 2021-01-13 with total page 1180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected peer reviewed papers from the International Conference on Advanced Production and Industrial Engineering (ICAPIE 2019). It covers a wide range of topics and latest research in mechanical systems engineering, materials engineering, micro-machining, renewable energy, industrial and production engineering, and additive manufacturing. Given the range of topics discussed, this book will be useful for students and researchers primarily working in mechanical and industrial engineering, and energy technologies.

Download or read book Titanium written by Gerd Lütjering and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors were motivated to prepare this book by the absence of any recent comprehensive book on titanium. The intent of this book is to provide a modern compendium that addresses both the phyical metallurgy as well as the applications of titanium. Until now the only book on this subject is that by Zwicker which was written in German and published almost 30 years ago. Chapter 1 is an introduction to the subject including some historical aspects of titanium. Chapter 2 is a s- mary of the Fundamental Aspects of Titanium, Chapter 3 is a summary of the Technological Aspects of Titanium and Chapters 4 through 9 address the specifics of the various classes of titanium ranging from CP Titanium to Titanium Matrix Composites. Finally, Chapter 10 covers “special” properties and applications of titanium. Our intent has been to address the subject conceptually rather than provide quantities of data of the sort that would be found in a Handbook. It is our intent that this book is useful for materials scientists and engineers interested in using titanium and for students either as a sourcebook or as a textbook. We have - tempted to include a representative set of references which provide additional detail for readers interested in specific aspects of titanium. Because of the re- tively recent growth of the technological importance of titanium, there is a vo- minous literature on titanium. While our references span this literature it has proven impossible to mention every contribution.

Download or read book Titanium written by Matthew J. Donachie and published by ASM International. This book was released on 2000 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to support the need of engineering, management, and other professionals for information on titanium by providing an overview of the major topics, this book provides a concise summary of the most useful information required to understand titanium and its alloys. The author provides a review of the significant features of the metallurgy and application of titanium and its alloys. All technical aspects of the use of titanium are covered, with sufficient metals property data for most users. Because of its unique density, corrosion resistance, and relative strength advantages over competing materials such as aluminum, steels, and superalloys, titanium has found a niche in many industries. Much of this use has occurred through military research, and subsequent applications in aircraft, of gas turbine engines, although more recent use features replacement joints, golf clubs, and bicycles.Contents include: A primer on titanium and its alloys, Introduction to selection of titanium alloys, Understanding titanium's metallurgy and mill products, Forging and forming, Castings, Powder metallurgy, Heat treating, Joining technology and practice, Machining, Cleaning and finishing, Structure/processing/property relationships, Corrosion resistance, Advanced alloys and future directions, Appendices: Summary table of titanium alloys, Titanium alloy datasheets, Cross-reference to titanium alloys, Listing of selected specification and standardization organizations, Selected manufacturers, suppliers, services, Corrosion data, Machining data.

Download or read book Microscale Surface Tension and Its Applications written by Pierre Lambert and published by MDPI. This book was released on 2019-10-21 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on advances in miniaturization and soft matter, surface tension effects are a major key to the development of soft/fluidic microrobotics. Benefiting from scaling laws, surface tension and capillary effects can enable sensing, actuation, adhesion, confinement, compliance, and other structural and functional properties necessary in micro- and nanosystems. Various applications are under development: microfluidic and lab-on-chip devices, soft gripping and manipulation of particles, colloidal and interfacial assemblies, fluidic/droplet mechatronics. The capillary action is ubiquitous in drops, bubbles and menisci, opening a broad spectrum of technological solutions and scientific investigations. Identified grand challenges to the establishment of fluidic microrobotics include mastering the dynamics of capillary effects, controlling the hysteresis arising from wetting and evaporation, improving the dispensing and handling of tiny droplets, and developing a mechatronic approach for the control and programming of surface tension effects. In this Special Issue of Micromachines, we invite contributions covering all aspects of microscale engineering relying on surface tension. Particularly, we welcome contributions on fundamentals or applications related to: Drop-botics: fluidic or surface tension-based micro/nanorobotics: capillary manipulation, gripping, and actuation, sensing, folding, propulsion and bio-inspired solutions; Control of surface tension effects: surface tension gradients, active surfactants, thermocapillarity, electrowetting, elastocapillarity; Handling of droplets, bubbles and liquid bridges: dispensing, confinement, displacement, stretching, rupture, evaporation; Capillary forces: modelling, measurement, simulation; Interfacial engineering: smart liquids, surface treatments; Interfacial fluidic and capillary assembly of colloids and devices; Biological applications of surface tension, including lab-on-chip and organ-on-chip systems.

Download or read book Titanium Alloys written by Maciej Motyka and published by BoD – Books on Demand. This book was released on 2019-11-27 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium alloys, due to unique physical and chemical properties (mainly high relative strength combined with very good corrosion resistance), are considered as an important structural metallic material used in hi-tech industries (e.g. aerospace, space technology). This book provides information on new manufacturing and processing methods of single- and two-phase titanium alloys. The eight chapters of this book are distributed over four sections. The first section (Introduction) indicates the main factors determining application areas of titanium and its alloys. The second section (Manufacturing, two chapters) concerns modern production methods for titanium and its alloys. The third section (Thermomechanical and surface treatment, three chapters) covers problems of thermomechanical processing and surface treatment used for single- and two-phase titanium alloys. The fourth section (Machining, two chapters) describes the recent results of high speed machining of Ti-6Al-4V alloy and the possibility of application of sustainable machining for titanium alloys.

Download or read book Laser Additive Manufacturing written by Milan Brandt and published by Woodhead Publishing. This book was released on 2016-09-01 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Additive Manufacturing: Materials, Design, Technologies, and Applications provides the latest information on this highly efficient method of layer-based manufacturing using metals, plastics, or composite materials. The technology is particularly suitable for the production of complex components with high precision for a range of industries, including aerospace, automotive, and medical engineering. This book provides a comprehensive review of the technology and its range of applications. Part One looks at materials suitable for laser AM processes, with Part Two discussing design strategies for AM. Parts Three and Four review the most widely-used AM technique, powder bed fusion (PBF) and discuss other AM techniques, such as directed energy deposition, sheet lamination, jetting techniques, extrusion techniques, and vat photopolymerization. The final section explores the range of applications of laser AM. Provides a comprehensive one-volume overview of advances in laser additive manufacturing Presents detailed coverage of the latest techniques used for laser additive manufacturing Reviews both established and emerging areas of application