Download or read book Advances in Machine Tool Design and Research 1967 written by S. A. Tobias and published by Elsevier. This book was released on 2013-10-08 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Machine Tool Design and Research 1967, Part 2 provides information pertinent to the development of machine tool design. This book discusses the advances in pneumatic positioning device in the machine tool laboratories. Organized into 41 chapters, this book starts with an overview of the pneumatic digital and analogue elements used in designing the control loop. This text then explains the control system for the cylindrical grinding process developed by fluid logic elements and the diaphragm-type fluid logic element used in the control system. Other chapters consider the causes of inaccuracies on a finished machined workpiece produced by a numerically controlled machine tool. This book discusses as well the machine errors that are corrected by instrumentation, the details of this installation, and the characteristics of the instrumentation required. The final chapter deals with the basic characteristics of material flow during closed die forging. This book is a valuable resource for production and mechanical engineers.
Download or read book Machine Tool Metrology written by Graham T. Smith and published by Springer. This book was released on 2016-04-06 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maximizing reader insights into the key scientific disciplines of Machine Tool Metrology, this text will prove useful for the industrial-practitioner and those interested in the operation of machine tools. Within this current level of industrial-content, this book incorporates significant usage of the existing published literature and valid information obtained from a wide-spectrum of manufacturers of plant, equipment and instrumentation before putting forward novel ideas and methodologies. Providing easy to understand bullet points and lucid descriptions of metrological and calibration subjects, this book aids reader understanding of the topics discussed whilst adding a voluminous-amount of footnotes utilised throughout all of the chapters, which adds some additional detail to the subject. Featuring an extensive amount of photographic-support, this book will serve as a key reference text for all those involved in the field.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Twin Control written by Mikel Armendia and published by Springer. This book was released on 2019-01-05 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book summarizes the results of the European research project “Twin-model based virtual manufacturing for machine tool-process simulation and control” (Twin-Control). The first part reviews the applications of ICTs in machine tools and manufacturing, from a scientific and industrial point of view, and introduces the Twin-Control approach, while Part 2 discusses the development of a digital twin of machine tools. The third part addresses the monitoring and data management infrastructure of machines and manufacturing processes and numerous applications of energy monitoring. Part 4 then highlights various features developed in the project by combining the developments covered in Parts 3 and 4 to control the manufacturing processes applying the so-called CPSs. Lastly, Part 5 presents a complete validation of Twin-Control features in two key industrial sectors: aerospace and automotive. The book offers a representative overview of the latest trends in the manufacturing industry, with a focus on machine tools.
Download or read book Mantech Project Book 1992 written by and published by DIANE Publishing. This book was released on 1993-06 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a summary of the projects the Air Force MANTECH Directorate has in progress or has completed within the last 10 years. Its purpose is to promote the transfer of technology which was developed through these investments into the defense industrial base.
Download or read book Machine Tools Production Systems 2 written by Christian Brecher and published by Springer Nature. This book was released on 2021-11-08 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first part of this volume provides the user with assistance in the selection and design of important machine and frame components. It also provides help with machine design, calculation and optimization of these components in terms of their static, dynamic and thermoelastic behavior. This includes machine installation, hydraulic systems, transmissions, as well as industrial design and guidelines for machine design. The second part of this volume deals with the metrological investigation and assessment of the entire machine tool or its components with respect to the properties discussed in the first part of this volume. Following an overview of the basic principles of measurement and measuring devices, the procedure for measuring them is described. Acceptance of the machine using test workpieces and the interaction between the machine and the machining process are discussed in detail. The German Machine Tools and Manufacturing Systems Compendium has been completely revised. The previous five-volume series has been condensed into three volumes in the new ninth edition with color technical illustrations throughout. This first English edition is a translation of the German ninth edition.
Download or read book Laser Measurement Technology written by Axel Donges and published by Springer. This book was released on 2014-10-14 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser measurement technology has evolved in the last years in a versatile and reflationary way. Today, its methods are indispensable for research and development activities as well as for production technology. Every physicist and engineer should therefore gain a working knowledge of laser measurement technology. This book closes the gap of existing textbooks. It introduces in a comprehensible presentation laser measurement technology in all its aspects. Numerous figures, graphs and tables allow for a fast access into the matter. In the first part of the book the important physical and optical basics are described being necessary to understand laser measurement technology. In the second part technically significant measuring methods are explained and application examples are presented. Target groups of this textbook are students of natural and engineering sciences as well as working physicists and engineers, who are interested to make themselves familiar with laser measurement technology and its fascinating potentials.
Download or read book Machine Tools Production Systems 3 written by Christian Brecher and published by Springer Nature. This book was released on 2021-12-13 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first part of this third volume focuses on the design of mechatronic components, in particular the feed drives of machine tools used to generate highly dynamic drive movements. Engineering guides for the selection and design of important machine components, the control technology of feed drives, and the measuring systems required for position capture are presented. Another focus is on process and diagnostic equipment for manufacturing machines and systems. The second part describes control concepts including programming methods for various applications of modern production systems. Programmable logic controllers (PLC), numerical controllers (NC) and robot controllers (RC) are part of these presentations. In the context of automated manufacturing systems, the various levels of the automation pyramid and the importance of control systems are also outlined. Finally, the volume deals with the engineering of machines and plants. The German Machine Tools and Production Systems Compendium has been completely revised. The previous five-volume series has been condensed into three volumes in the new ninth edition with colored technical illustrations throughout. This first English edition is a translation of the German ninth edition.
Download or read book Handbook of Optical Dimensional Metrology written by Kevin Harding and published by Taylor & Francis. This book was released on 2016-04-19 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to their speed, data density, and versatility, optical metrology tools play important roles in today's high-speed industrial manufacturing applications. Handbook of Optical Dimensional Metrology provides useful background information and practical examples to help readers understand and effectively use state-of-the-art optical metrology methods
Download or read book Electric Electronic and Control Engineering written by Fun Shao and published by CRC Press. This book was released on 2015-07-03 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric, Electronic and Control Engineering contains the contributions presented at the 2015 International Conference on Electric, Electronic and Control Engineering (ICEECE 2015, Phuket Island, Thailand, 5-6 March 2015). The book is divided into four main topics: - Electric and Electronic Engineering - Mechanic and Control Engineering - Informati
Download or read book Measurement and Monitoring written by Vytautas Giniotis and published by Momentum Press. This book was released on 2014-05-27 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the main methods and techniques for measuring and monitoring the accuracy of geometrical parameters of precision Computer Numerically Controlled (CNC) and automated machines, including modern coordinate measuring machines (CMMs). Highlights include: • Standard methods and means of testing, together with methods newly developed and tested by the authors; • Various parameters, such as straightness, perpendicularity, flatness, pitch, yaw, and roll, as well as the principal processes for measurement of these parameters; • Lists and tables of geometrical accuracy parameters, together with diagrams of arrangements for their control and evaluation of measurement results; • Special methods and some original new devices for measurement and monitoring, information measuring systems (consisting of laser interferometers, photoelectric raster encoders or scales, etc.), and methods for the measurement and testing of circular scales, length scales, and encoders; • Methods for measuring small lengths, gaps, and distances between two surfaces; • Examples showing the suitability of mechatronic methods for high accuracy correction of machines; and • Particular attention is given to the analysis of ISO written standards of accuracy control, terms and definitions, and methods for evaluation of the measurement results during performance verification.
Download or read book The Mechanical Systems Design Handbook written by Yildirim Hurmuzlu and published by CRC Press. This book was released on 2017-12-19 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: With a specific focus on the needs of the designers and engineers in industrial settings, The Mechanical Systems Design Handbook: Modeling, Measurement, and Control presents a practical overview of basic issues associated with design and control of mechanical systems. In four sections, each edited by a renowned expert, this book answers diverse questions fundamental to the successful design and implementation of mechanical systems in a variety of applications. Manufacturing addresses design and control issues related to manufacturing systems. From fundamental design principles to control of discrete events, machine tools, and machining operations to polymer processing and precision manufacturing systems. Vibration Control explores a range of topics related to active vibration control, including piezoelectric networks, the boundary control method, and semi-active suspension systems. Aerospace Systems presents a detailed analysis of the mechanics and dynamics of tensegrity structures Robotics offers encyclopedic coverage of the control and design of robotic systems, including kinematics, dynamics, soft-computing techniques, and teleoperation. Mechanical systems designers and engineers have few resources dedicated to their particular and often unique problems. The Mechanical Systems Design Handbook clearly shows how theory applies to real world challenges and will be a welcomed and valuable addition to your library.
Download or read book Handbook of Laser Technology and Applications written by Chunlei Guo and published by CRC Press. This book was released on 2021-06-23 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook gives a fully updated guide to lasers and laser technologies, including the complete range of their technical applications. This forth volume covers laser applications in the medical, metrology and communications fields. Key Features: • Offers a complete update of the original, bestselling work, including many brand-new chapters. • Deepens the introduction to fundamentals, from laser design and fabrication to host matrices for solid-state lasers, energy level diagrams, hosting materials, dopant energy levels, and lasers based on nonlinear effects. • Covers new laser types, including quantum cascade lasers, silicon-based lasers, titanium sapphire lasers, terahertz lasers, bismuth-doped fiber lasers, and diode-pumped alkali lasers. • Discusses the latest applications, e.g., lasers in microscopy, high-speed imaging, attosecond metrology, 3D printing, optical atomic clocks, time-resolved spectroscopy, polarization and profile measurements, pulse measurements, and laser-induced fluorescence detection. • Adds new sections on laser materials processing, laser spectroscopy, lasers in imaging, lasers in environmental sciences, and lasers in communications. This handbook is the ideal companion for scientists, engineers, and students working with lasers, including those in optics, electrical engineering, physics, chemistry, biomedicine, and other relevant areas.
Download or read book Metal Cutting Theory and Practice written by David A. Stephenson and published by CRC Press. This book was released on 2018-09-03 with total page 1381 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Complete Reference Covering the Latest Technology in Metal Cutting Tools, Processes, and Equipment Metal Cutting Theory and Practice, Third Edition shapes the future of material removal in new and lasting ways. Centered on metallic work materials and traditional chip-forming cutting methods, the book provides a physical understanding of conventional and high-speed machining processes applied to metallic work pieces, and serves as a basis for effective process design and troubleshooting. This latest edition of a well-known reference highlights recent developments, covers the latest research results, and reflects current areas of emphasis in industrial practice. Based on the authors’ extensive automotive production experience, it covers several structural changes, and includes an extensive review of computer aided engineering (CAE) methods for process analysis and design. Providing updated material throughout, it offers insight and understanding to engineers looking to design, operate, troubleshoot, and improve high quality, cost effective metal cutting operations. The book contains extensive up-to-date references to both scientific and trade literature, and provides a description of error mapping and compensation strategies for CNC machines based on recently issued international standards, and includes chapters on cutting fluids and gear machining. The authors also offer updated information on tooling grades and practices for machining compacted graphite iron, nickel alloys, and other hard-to-machine materials, as well as a full description of minimum quantity lubrication systems, tooling, and processing practices. In addition, updated topics include machine tool types and structures, cutting tool materials and coatings, cutting mechanics and temperatures, process simulation and analysis, and tool wear from both chemical and mechanical viewpoints. Comprised of 17 chapters, this detailed study: Describes the common machining operations used to produce specific shapes or surface characteristics Contains conventional and advanced cutting tool technologies Explains the properties and characteristics of tools which influence tool design or selection Clarifies the physical mechanisms which lead to tool failure and identifies general strategies for reducing failure rates and increasing tool life Includes common machinability criteria, tests, and indices Breaks down the economics of machining operations Offers an overview of the engineering aspects of MQL machining Summarizes gear machining and finishing methods for common gear types, and more Metal Cutting Theory and Practice, Third Edition emphasizes the physical understanding and analysis for robust process design, troubleshooting, and improvement, and aids manufacturing engineering professionals, and engineering students in manufacturing engineering and machining processes programs.
Download or read book Handbook of Dimensional Measurement written by Francis T. Farago and published by Industrial Press Inc.. This book was released on 1994 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nineteen Fact-Filled Charters that contain authoritative treatment of all aspects of dimensional measurement technology make Handbook of Dimensional Measurement the most readable and comprehensive guide available for engineers and technicians engages in the various stages of industrial production. Design engineers, manufacturing engineers, tool and gage makers, quality control specialists, and reliability experts will find a wealth of practical data as well as complete coverage - both basic and advanced - of dimensional measurement techniques and equipment. The Third Edition of this classic book has been completely revised to include the computer and electronics revolution in metrology. Virtually every type of measurement instrument and machine, even the newest devices, can be found in these pages. Hundreds of changes, and additions and scores of new illustrations have been incorporated to assure that Handbook of Dimensional Measurement retains its status as the standard reference for the practitioner of dimensional measurement.
Download or read book National Bureau of Standards Miscellaneous Publication written by and published by . This book was released on 1966 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dimensional Metrology Subject classified with Abstracts Through 1964 written by and published by . This book was released on 1966 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt:
