Download or read book Flowfield Modeling and Diagnostics written by Ashwani K. Gupta and published by Taylor & Francis. This book was released on 1985 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 2004. Routledge is an imprint of Taylor & Francis, an informa company.
Download or read book New Trends in Instrumentation for Hypersonic Research written by A. Boutier and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of the growing interest in hypersonic flows, the AGARD Fluid Dynamics Panel initiated a sub-working group on instrumentation for hypersonics in 1989. This sub-group, chaired by J. WENDT (VKI -Belgium), was composed of: A. BOUTIER (ONERA -France), K. BUTEFISCH (DLR -Germany), R. CATTOLICA (SANDIA Lab. -USA), V. CLINE (AEDC -USA), A. GIRARD (ONERA -France), R. McKENZIE (NASA Ames -USA), S. OCHELTREE (NASA Langley -USA) and G. SMEETS (ISL -Franco-German Inst.). As a result of several meetings, the idea came to organize this workshop, 27th April - 1st May 1992, on "New Trends in Instrumentation for Hypersonic Research", at Le Fauga-Mauzac ONERA center, in France, where the new hot-shot arc-heated facility F4, as well as a new conference building, were recently completed. This workshop has been organized in close connection with the AGARD FDP Symposium to be held in Torino 4 - 8 May 1992 on "Theoretical and Experimental Methods in Hypersonic Flows": the main conclusions and ideas expressed by the papers and during the discussions of this workshop are reported in session 7 and have been presented in Torino in a special Instrumentation session. As chairman of this workshop, I express many thanks to the Organizing Committee composed of Karl BUTEFISCH, Andre GIRARD, Stewart OCHELTREE and John WENDT for their very constructive help, leading to a meeting that was recognized to be very fruitful for all the participants.
Download or read book Three dimensional Transonic Rotor Flow Field Reconstructed from Holographic Interferogram Data written by J. K. Kittleson and published by . This book was released on 1985 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: Holographic interferometry and computer-assisted tomography (CAT) are used to determine the transonic flow field of a model rotor blade in hover. A pulsed ruby laser recorded 40 interferograms with a 61 cm-diam view field near the model rotor-blade tip operating at a tipo Mach number of 0.90. After digitizing the interferograms and extracting fringe-order functions, the data are transferred to a CAT code. The CAT code then calculates pressure coefficients in several planes above the blade surface. The values from the holography-CAT method compare favorably with previously obtained numerical computations and laser velocimeter measurements at most locations near the blade tip. The results demonstrate the techniques's potential for three-dimensional transonic rotor flow studies. Keywords: Holographic interferometry; Computer assisted tomography; Helicopter aerodynamics; Transonic aerodynamics.
Download or read book Flow Visualization written by Wolgang Merzkirch and published by Elsevier. This book was released on 2012-12-02 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flow Visualization, Second Edition focuses on developments, applications, and results in the field of flow visualization. Organized into four chapters, this book begins with the principles of flow visualization and image processing. Subsequent chapters describe the methods of flow visualization, particularly the addition of foreign material to the flowing fluid that might be gaseous or liquid; certain optical methods that are sensitive to changes of the index of refraction; and flow field marking by heat and energy addition.
Download or read book Recent Advances In Spray Combustion written by Kenneth K. Kuo and published by AIAA. This book was released on 1996 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Instability and Transition written by M.Y. Hussaini and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: These two volumes contain the proceedings of the workshop on the Institute for Computer Instability and Transition, sponsored by Applications in Science and Engineering (ICASE) and the Langley Research Center (LaRC), during May 15 to June 9, 1989. The work shop coincided with the initiation of a new, focused research pro gram on instability and transition at LaRC. The objectives of the workshop were to (i) expose the academic community to current technologically important issues of instability and transition in shear flows over the entire speed range, (ii) acquaint the academic com munity with the unique combination of theoretical, computational and experimental capabilities at LaRC and foster interaction with these facilities, (iii) review current state-of-the-art and propose fu ture directions for instability and transition research, (iv) accelerate progress in elucidating basic understanding of transition phenomena and in transferring this knowledge into improved design methodolo gies through improved transition modeling, and (v) establish mech anisms for continued interaction. The objectives (i) to (iii) were of course immediately met. It is still premature to assess whether ob jectives (iv) and (v) are achieved. The workshop program consisted of tutorials, research presenta tions, panel discussions, experimental and computational demonstra tions, and collaborative projects.
Download or read book Advances in Fluid Mechanics Measurements written by MOHAMED GAD-EL-HAK and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: One cannot overemphasize the importance of studying fluids in motion or at rest for a variety of scientific and engineering endeavors. Fluid mechanics as an art reaches back into antiquity, but its rational formulation is a relatively recent undertaking. Much of the physics of a particular flow situation can be understood by conducting appropriate experiments. Flow visualization techniques offer a useful tool to establish an overall picture of a flow field and to delineate broadly its salient features before embarking on more detailed quantitative measurements. Among the single-point measurements that are particularly difficult are those in separated flows, non-Newtonian fluids, rotating flows, and nuclear aerosols. Pressure, shear stress, vorticity, and heat transfer coefficient are also difficult quantities to measure, particularly for time-dependent flows. These and other special situations are among the topics covered in this volume. Each article emphasizes the development of a particular measuring technique. The topics covered were chosen because of their importance to the field, recent appeal, and potential for future development. The articles are comprehensive and coverage is pedagogical with a bias towards recent developments.
Download or read book Open cycle Magnetohydrodynamic Electrical Power Generation written by and published by . This book was released on 1978 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Interferometric Investigation of Supersonic Flow Fields with Shock Shock Interactions written by Mark Paul Loomis and published by . This book was released on 1990 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optical Metrology written by Olivério D.D. Soares and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical Metrology is a rapidly expanding field i'n both its scientific foundations and technological developments, being of major concern to measurements, quality control, non-destructive tes ting and in fundamental research. In order to define the state-of-the-art, and to evaluate pre sent accomplishments, whilst giving an appraisal of how each of the particular topics will evolve the Optical Metrology-anAdvancedStudy Institute was organized with a concourse of the world's acknowledged experts. Thus, the Institute provided a forum for tutorial reviews blended with topics of current research in the form of a progressive and comprehensive presentation of recent promising developments, lea ding techniques and instrumentation in incoherent and coherent optics for Metrology, Sensing and Control in Science, Industry and Biomedici ne. Optical Metrology is a very broad field which is highly inter disciplinary in its applications, and in its scientific and technolo gical background. It is related to such diverse disciplines as physi cal and chemical sciences, engineering, electronics, computer scien ces, biological sciences and theoretical sciences, such as statistics. Although there was an emphasis on photomechanics and industri al applications, a marked diversity was reflected in the different background and interests of the participants. The vitality and viabi lity of the discipline was enhanced not only by the encouraging number of young scientists and industrialists participating and authoring, but also by the remarkably promising prospects found in x the practical applications supported by advanced electronic hybridi zation.
Download or read book Flow Visualization written by Alexander J. Smits and published by World Scientific. This book was released on 2012 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the 2nd edition of the book, Flow Visualization: Techniques and Examples, which was published by Imperial College Press in 2000. Many of the chapters have been revised and updated to take into consideration recent changes in a number of flow visualization and measurement techniques, including an updated high quality flow gallery. Unique among similar publications, this book focuses on the practical rather than theoretical aspects. Obtaining high quality flow visualization results is, in many ways, more of an art than a science, and experience plays a key deciding role. The depth and breadth of the material will make this book invaluable to readers of all levels of experience in the field.
Download or read book Measuring Techniques in Gas Liquid Two Phase Flows written by J.M. Delhaye and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: A IUTAM symposium on "Measuring Techniques in Gas-Liquid Two Phase Flows" was held on July 5-8, 1983 in Nancy, France. This topic in cluded instrumentation for steam-water and liquid-vapor flows but strictly excluded measuring techniques for gas or liquid flows with solid particles. The top priority in the paper selection was given to presentations of new methods which had been substantiated by theoretical modeling, calibration tests and comparison tests with other techniques. Examples of experimental resul ts obtained with the proposed instrumentation had to be displayed. However the interpretation of these results in terms of two-phase flow or heat transfer modeling did not fall wi thin the scope of the meeting. Thirty four papers were presented during the Symposium and 79 participants coming from Canada, European countries, Japan and the United States attended the sessions. They represented not only Universities but also state agencies and private companies. After the meeting each paper was peer-reviewed by at least three referees. The Editors of this Procee dings Volume are pleased to extend their deep gratitude to the following reviewers: J.L. Achard, R.J. Adrian, B. Azzopardi, J.A. Boure, G. Costigan, M. Courtaud, A.E. Dukler, F. Durst, J.R. Fincke, G. Gouesbet, P. Griffith, T.J. Hanratty, A. Hawighorst, T.R. Heidrick, G. Hetsroni, Y.Y. Hsu, M.
Download or read book A Collection of Technical Papers written by and published by . This book was released on 1976 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optical Engineering written by and published by . This book was released on 1985 with total page 1330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publishes papers reporting on research and development in optical science and engineering and the practical applications of known optical science, engineering, and technology.
Download or read book NASA Technical Note written by and published by . This book was released on 1971 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 16th JANNAF Combustion Meeting Naval Postgraduate School Monterey California September 10 14 1979 DDT and gun propellants unclassified written by and published by . This book was released on 1979 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt:
