Download or read book Strategies for Planar Laser induced Fluorescence Thermometry in Shock Tube Flows written by Ji Hyung Yoo and published by Stanford University. This book was released on 2011 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis was motivated by the need to better understand the temperature distribution in shock tube flows, especially in the near-wall flow regions. Two main ideas in planar laser-induced fluorescence (PLIF) diagnostics are explored in this thesis. The first topic is the development of a single-shot PLIF diagnostic technique for quantitative temperature distribution measurement in shock tube flow fields. PLIF is a non-intrusive, laser-based diagnostic technique capable of instantaneously imaging key flow features, such as temperature, pressure, density, and species concentration, by measuring fluorescence signal intensity from laser-excited tracer species. This study performed a comprehensive comparison of florescence tracers and excitation wavelengths to determine the optimal combination for PLIF imaging in shock tube flow applications. Excitation of toluene at 248nm wavelength was determined to be the optimal strategy due to the resulting high temperature sensitivity and fluorescence signal level, compared to other ketone and aromatic tracers at other excitation wavelengths. Sub-atmospheric toluene fluorescence yield data was measured to augment the existing photophysical data necessary for this diagnostic technique. In addition, a new imaging test section was built to allow PLIF imaging in all regions of the shock tube test section, including immediately adjacent to the side and end walls. The signal-to-noise (SNR) and spatial resolution of the PLIF images were optimized using statistical analysis. Temperature field measurements were made with the PLIF diagnostic technique across normal incident and reflected shocks in the shock tube core flow. The resulting images show uniform spatial distribution, and good agreement with conditions calculated from the normal shock jump equations. Temperature measurement uncertainty is about 3.6% at 800K. The diagnostic was also applied to image flow over a wedge. The resulting images capture all the flow features predicted by numerical simulations. The second topic is the development of a quantitative near-wall diagnostic using tracer-based PLIF imaging. Side wall thermal boundary layers and end wall thermal layers are imaged to study the temperature distribution present under constant pressure conditions. The diagnostic technique validated in the shock tube core flow region was further optimized to improve near-wall image quality. The optimization process considered various wall materials, laser sheet orientations, camera collection angles, and optical components to find the configuration that provides the best images. The resulting images have increased resolution (15[Mu]m) and are able to resolve very thin non-uniform near-wall temperature layers (down to 60[Mu]m from the surface). The temperature field and thickness measurements of near-wall shock tube flows under various shock conditions and test gases showed good agreement with boundary layer theory. To conclude this thesis, new applications and future improvements to the developed PLIF diagnostic technique are discussed. These suggested refinements can provide an even more robust and versatile PLIF imaging technique capable of measuring a wider range of flow conditions near walls.
Download or read book In situ Spectroscopic Techniques at High Pressure written by Andreas Braeuer and published by Elsevier. This book was released on 2015-12-07 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: In situ Spectroscopic Techniques at High Pressure provides a comprehensive treatment of in-situ applications of spectroscopic techniques at high pressure and their working principles, allowing the reader to develop a deep understanding of which measurements are accessible with each technique, what their limitations are, and for which application each technique is best suited. Coverage is also given to the instrumental requirements for these applications, with respect to the high pressure instrumentation and the spectroscopic components of the equipment. The pedagogical style of the book is supplemented by the inclusion of "study questions" which aim to make it useful for graduate-level courses. - Bridges the gap between supercritical fluid science/technology and in-situ spectroscopic techniques - Provides a powerful guide to applying spectroscopic techniques as gainful sensors at high pressure - Highlights the influence of a high pressure environment and high pressure equipment on spectroscopic techniques - Presents a deep understanding of which measurements are accessible with each technique, what their limitations are, and for which application each technique is best suited
Download or read book Army Research Office and Air Force Office of Scientific Research 2002 Contractors Meeting in Chemical Propulsion written by David M. Mann and published by . This book was released on 2002 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstracts are given for 6.1 basic research in chemical propulsion sponsored by the Army Research Office and the Air Force Office of Scientific Research.
Download or read book Applied Combustion Diagnostics written by KoHse-HoingHaus and published by Taylor & Francis US. This book was released on 2002-04-26 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: The editors have assembled a world-class group of contributors who address the questions the combustion diagnostic community faces. They are chemists who identify the species to be measured and the interfering substances that may be present; physicists, who push the limits of laser spectroscopy and laser devices and who conceive suitable measurement schemes; and engineers, who know combustion systems and processes. This book assists in providing guidance for the planning of combustion experiments, in judging research strategies and in conceiving new ideas for combustion research. It provides a snapshot of the available diagnostic methods and thier typical applications from the perspective of leading experts in the field.
Download or read book Laser Technology and its Applications written by Yufei Ma and published by BoD – Books on Demand. This book was released on 2019-01-03 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: The laser has become more and more important in scientific research and industrial applications. Now, the laser wavelength can cover the range from ultraviolet to terahertz and output laser performance has significantly progressed in recent years. This book is focused on the advanced diode laser, fiber laser, and their applications in laser ablation, laser-introduced fluorescence, and laser treatment. The advantages of laser technology are shown comprehensively.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 93 2028 93 2069 written by and published by . This book was released on 1992 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NBS Special Publication written by and published by . This book was released on 1968 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combustion Measurements written by Norman Chigier and published by CRC Press. This book was released on 2024-11-01 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book begins with an introduction to the general problems of making measurements in high temperature and a presentation of chemically reacting flow systems. It describes each instrument with the various diagnostic techniques and discusses measurements that have been made in furnaces, flames, and rocket engines. The detailed measurement techniques described in this book cover a wide spectrum of applications in combustion systems, including gas turbine, rocket measurement techniques that were developed in laboratories. Information obtained on detailed temperature, velocity, particle size, and gas concentration distribution is leading to improve understanding of the chemical combustion process and to design imporvements in combustors.
Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1986 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combustings Flow Diagnostics written by D.F.G. Durão and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of papers prepared for and presented at a NATO sponsored Advanced Study Institute which was held in Montechoro, Portugal during the period 16-27 April, 1990. This Institute was attended by approximately ninety delegates from fifteen countries and followed from a related Institute held in Vimeiro, Portugal in 1987 (see the book entitled "Instrumentation for Combustion and Flow in Engines", edited by D. F. G. Dur~o, J. H. Whitelaw and P. O. Witzel. The purposes of the first Institute related closely to instrumentation for use in gas-turbine combustors and the cylinders of internal-combustion engines. These topics were also addressed in the second Institute, though in a manner which was wider ranging and chosen to demonstrate and explain the development and application of measurement methods to combusting flows in general. The papers contained in this boo~ were selected to provide the reader with a comprehensive and up-to-date view of the variety of experimental techniques available to measure in combusting flows. Included are discussions of their range and applicability, potential accuracy and ease of use. Thus, the first paper provides a brief overview and the second an indication of those aspects of combustion which should influence the choice of flow property to be measured and the technique to be used.
Download or read book Laser Diagnostics for Combustion Temperature and Species written by Alan C. Eckbreth and published by CRC Press. This book was released on 1996-10-10 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on spectroscopically-based, spatially-precise, laser techniques for temperature and chemical composition measurements in reacting and non-reacting flows, this book makes these powerful and important new tools in combustion research
Download or read book MILD Combustion Modelling Challenges Experimental Configurations and Diagnostic Tools written by Alessandro Parente and published by Frontiers Media SA. This book was released on 2021-11-26 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Shock Waves Proceedings Of The 20th International Symposium In 2 Volumes written by Hans G Hornung and published by World Scientific. This book was released on 1997-01-22 with total page 1740 pages. Available in PDF, EPUB and Kindle. Book excerpt: The symposia take place every two years. They are the forum at which scientists concerned with shock waves present their research. They USE shock waves for chemical kinetics studies, for materials studies, and smashing kidney stones; they STUDY the phenomena associated with flows involving shock waves, such as supersonic flow, explosions, detonations, volcanic eruptions, and, in this symposium, even such with-it topics as impact of Shoemaker-Levy on Jupiter and blast waves in the World Trade Center. They also discover new, bigger and better ways of generating flows at hypervelocity speeds and develop their technological tools further.The international exchange of information is documented in the proceedings volumes, which have become a storehouse of information on the subject, documenting the history of this peculiar branch of science that involves chemists, physicists, engineers, geophysicists, material scientists and biologists.
Download or read book ARO and AFOSR Contractors Meeting in Chemical Propulsion Held in Virginia Beach Virginia on 3 6 June 1996 written by David M. Mann and published by . This book was released on 1996 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Partial contents: Supercritical droplet behavior; Fundamentals of acoustic instabilities in liquid-propellant rockets; Modeling liquid jet atomization proceses; Liquid-propellant droplets dynamics and combustions in supercritical forced convective environments; Contributions of shear coaxial injectors to liquid rocket motor combustion instabilities; High pressure combustion studies under combustion driven oscillatory flow conditions; Droplet collision on liquid propellant combustion; Combustion and plumes; Development of a collisional radiative emission model for strongly nonequilibrium flows; Energy transfer processes in the production of excited states in reacting rocket flows; modeling nonequilibrium radiation in high altitude plumes; kinetics of plume radiation, and of HEDMs and metallic fuels combustion; Nonsteady combustion mechanisms of advanced solid propellants; Chemical mechanisms at the burning surface. p15
Download or read book Energy Research Abstracts written by and published by . This book was released on 1979 with total page 1520 pages. Available in PDF, EPUB and Kindle. Book excerpt:
