Download or read book Laser Growth and Processing of Photonic Devices written by Nikolaos A Vainos and published by Elsevier. This book was released on 2012-07-10 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of lasers in the processing of electronic and photonic material is becoming increasingly widespread, with technological advances reducing costs and increasing both the quality and range of novel devices which can be produced. Laser growth and processing of photonic devices is the first book to review this increasingly important field.Part one investigates laser-induced growth of materials and surface structures, with pulsed laser deposition techniques, the formation of nanocones and the fabrication of periodic photonic microstructures explored in detail. Laser-induced three-dimensional micro- and nano-structuring are the focus of part two. Exploration of multiphoton lithography, processing and fabrication is followed by consideration of laser-based micro- and nano-fabrication, laser-induced soft matter organization and microstructuring, and laser-assisted polymer joining methods. The book concludes in part three with an investigation into laser fabrication and manipulation of photonic structures and devices. Laser seeding and thermal processing of glass with nanoscale resolution, laser-induced refractive index manipulation, and the thermal writing of photonic devices in glass and polymers are all considered.With its distinguished editor and international team of expert contributors, Laser growth and processing of photonic devices is an essential tool for all materials scientists, engineers and researchers in the microelectronics industry. - The first book to review the increasingly important field of laser growth and processing of photonic devices - Investigates laser-induced growth of materials and surface structures, pulsed laser deposition techniques, the formation of nanocones and the fabrication of periodic photonic microstructures - Examines laser-induced three-dimensional micro- and nano-structuring and concludes with an investigation into laser fabrication and manipulation of photonic structures and devices

Download or read book Recent Advances in Laser Processing of Materials written by Jacques Perriere and published by Elsevier. This book was released on 2006-03-29 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser materials interaction and processing is an established and growing field within the materials science community. By taking a detailed look at the fundamentals of laser matter interaction, Recent Advances in Laser Processing of Materials charts the recent progress of laser materials interaction and processing in various emerging materials science domains. With special emphasis placed on nanostructures and future developments, this book provides an interdisciplinary support for basic and applied photo-assisted processing research. Coverage includes: - laser assisted synthesis of new materials (nanoparticles, nanotubes, active molecules, new phases...) - laser assisted surface transformation (nanostructuring, lithography, etching...) - laser assisted bulk material transformation (doping, marking, crystallisation...) - Laser assisted synthesis of new materials (nanoparticles, nanotubes, active molecules, new phases...) - Laser assisted surface transformation (nanostructuring, lithography, etching...) - Laser assisted bulk material transformation (doping, marking, crystallisation...)

Download or read book Optical Biomimetics written by Maryanne Large and published by Elsevier. This book was released on 2012-09-24 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical biomimetics, the study of natural systems to inspire novel solutions to problems in optical technologies, has attracted growing interest. Optical biomimetics reviews key research in this area, focusing on the techniques and approaches used to characterise and mimic naturally occurring optical effects.Beginning with an overview of natural photonic structures, Optical biomimetics goes on to discuss optical applications of biomolecules, such as retinylidene and bacteriorhodopsin, polarisation effects in natural photonic structures and their applications, and biomimetic nanostructures for anti-reflection (AR) devices. Control of iridescence in natural photonic structures is explored through the case of butterfly scales, alongside a consideration of nanostructure fabrication using natural synthesis. The investigation into silk optical materials is followed by a final discussion of the control of florescence in natural photonic structures.With its distinguished editor and international team of expert contributors, Optical biomimetics is a valuable guide for scientists and engineers in both academia and industry who are already studying biomimetics, and a fascinating introduction for those who wish to move into this interesting new field. - Reviews key research in optical biomimetics, focusing on the techniques and approaches used to characterise and mimic naturally-occurring optical effects - Discusses optical applications of biomolecules, such as retinylidene and bacteriorhodopsin - Explores the control of iridescence in natural photonic structures through the case of butterfly scales

Download or read book Laser Surface Engineering written by Jonathan R. Lawrence and published by Elsevier. This book was released on 2014-10-02 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lasers can alter the surface composition and properties of materials in a highly controllable way, which makes them efficient and cost-effective tools for surface engineering. This book provides an overview of the different techniques, the laser-material interactions and the advantages and disadvantages for different applications. Part one looks at laser heat treatment, part two covers laser additive manufacturing such as laser-enhanced electroplating, and part three discusses laser micromachining, structuring and surface modification. Chemical and biological applications of laser surface engineering are explored in part four, including ways to improve the surface corrosion properties of metals. - Provides an overview of thermal surface treatments using lasers, including the treatment of steels, light metal alloys, polycrystalline silicon and technical ceramics - Addresses the development of new metallic materials, innovations in laser cladding and direct metal deposition, and the fabrication of tuneable micro- and nano-scale surface structures - Chapters also cover laser structuring, surface modification, and the chemical and biological applications of laser surface engineering

Download or read book Optics and Photonics written by National Research Council and published by National Academies Press. This book was released on 2013-03-19 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optics and photonics technologies are ubiquitous: they are responsible for the displays on smart phones and computing devices, optical fiber that carries the information in the internet, advanced precision manufacturing, enhanced defense capabilities, and a plethora of medical diagnostics tools. The opportunities arising from optics and photonics offer the potential for even greater societal impact in the next few decades, including solar power generation and new efficient lighting that could transform the nation's energy landscape and new optical capabilities that will be essential to support the continued exponential growth of the Internet. As described in the National Research Council report Optics and Photonics: Essential Technologies for our Nation, it is critical for the United States to take advantage of these emerging optical technologies for creating new industries and generating job growth. The report assesses the current state of optical science and engineering in the United States and abroad-including market trends, workforce needs, and the impact of photonics on the national economy. It identifies the technological opportunities that have arisen from recent advances in, and applications of, optical science and engineering. The report also calls for improved management of U.S. public and private research and development resources, emphasizing the need for public policy that encourages adoption of a portfolio approach to investing in the wide and diverse opportunities now available within photonics. Optics and Photonics: Essential Technologies for our Nation is a useful overview not only for policymakers, such as decision-makers at relevant Federal agencies on the current state of optics and photonics research and applications but also for individuals seeking a broad understanding of the fields of optics and photonics in many arenas.

Download or read book Applied Photonics written by Chai Yeh and published by Elsevier. This book was released on 2012-12-02 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photonic circuitry is the first-choice technological advancement recognized by the telecommunications industry. Due to the speed, strength, and clarity of signal, photonic circuits are rapidly replacing electronic circuits in a range of applications. Applied Photonics is a state-of-the-art reference book that describes the fundamental physical concept of photonics and examines the most current information available in the photonics field. Cutting-edge developments in semiconductors, optical switches, and solitons are presented in a readable and easily understandable style, making this volume accessible, if not essential, reading for practicing engineers and scientists. Introduces the concept of nonlinear interaction of photons with matters, photons, and phonons Covers recent developments of semiconductor lasers and detectors in the communications field Discusses the development of nonlinear devices, including optical amplifiers, solitons, and phase conjugators, as well as the development of photonic components, switches, interconnects, and image processing devices

Download or read book Design and Realization of Novel GaAs Based Laser Concepts written by Tim David Germann and published by Springer Science & Business Media. This book was released on 2013-02-26 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor heterostructures represent the backbone for an increasing variety of electronic and photonic devices, for applications including information storage, communication and material treatment, to name but a few. Novel structural and material concepts are needed in order to further push the performance limits of present devices and to open up new application areas. This thesis demonstrates how key performance characteristics of three completely different types of semiconductor lasers can be tailored using clever nanostructure design and epitaxial growth techniques. All aspects of laser fabrication are discussed, from design and growth of nanostructures using metal-organic vapor-phase epitaxy, to fabrication and characterization of complete devices.

Download or read book Modeling Characterization and Production of Nanomaterials written by and published by Elsevier. This book was released on 2015-03-17 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nano-scale materials have unique electronic, optical, and chemical properties which make them attractive for a new generation of devices. Part one of Modeling, Characterization, and Production of Nanomaterials: Electronics, Photonics and Energy Applications covers modeling techniques incorporating quantum mechanical effects to simulate nanomaterials and devices, such as multiscale modeling and density functional theory. Part two describes the characterization of nanomaterials using diffraction techniques and Raman spectroscopy. Part three looks at the structure and properties of nanomaterials, including their optical properties and atomic behaviour. Part four explores nanofabrication and nanodevices, including the growth of graphene, GaN-based nanorod heterostructures and colloidal quantum dots for applications in nanophotonics and metallic nanoparticles for catalysis applications. Comprehensive coverage of the close connection between modeling and experimental methods for studying a wide range of nanomaterials and nanostructures Focus on practical applications and industry needs, supported by a solid outlining of theoretical background Draws on the expertise of leading researchers in the field of nanomaterials from around the world

Download or read book Magnetic Nano and Microwires written by Manuel Vázquez and published by Woodhead Publishing. This book was released on 2015-05-27 with total page 847 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic nanowires and microwires are key tools in the development ofenhanced devices for information technology (memory and data processing) andsensing. Offering the combined characteristics of high density, high speed, andnon-volatility, they facilitate reliable control of the motion of magnetic domainwalls; a key requirement for the development of novel classes of logic and storagedevices. Part One introduces the design and synthesis of magnetic nanowires andmicrowires, reviewing the growth and processing of nanowires and nanowireheterostructures using such methods as sol-gel and electrodepositioncombinations, focused-electron/ion-beam-induced deposition, chemicalvapour transport, quenching and drawing and magnetic interactions. Magneticand transport properties, alongside domain walls, in nano- and microwiresare then explored in Part Two, before Part Three goes on to explore a widerange of applications for magnetic nano- and microwire devices, includingmemory, microwave and electrochemical applications, in addition to thermalspin polarization and configuration, magnetocalorific effects and Bloch pointdynamics. - Detailed coverage of multiple key techniques for the growth and processing of nanowires and microwires - Reviews the principles and difficulties involved in applying magnetic nano- and microwires to a wide range of applications - Combines the expertise of specialists from around the globe to give a broad overview of current and future trends

Download or read book Directed Self assembly of Block Co polymers for Nano manufacturing written by Roel Gronheid and published by Woodhead Publishing. This book was released on 2015-07-17 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The directed self-assembly (DSA) method of patterning for microelectronics uses polymer phase-separation to generate features of less than 20nm, with the positions of self-assembling materials externally guided into the desired pattern. Directed self-assembly of Block Co-polymers for Nano-manufacturing reviews the design, production, applications and future developments needed to facilitate the widescale adoption of this promising technology. Beginning with a solid overview of the physics and chemistry of block copolymer (BCP) materials, Part 1 covers the synthesis of new materials and new processing methods for DSA. Part 2 then goes on to outline the key modelling and characterization principles of DSA, reviewing templates and patterning using topographical and chemically modified surfaces, line edge roughness and dimensional control, x-ray scattering for characterization, and nanoscale driven assembly. Finally, Part 3 discusses application areas and related issues for DSA in nano-manufacturing, including for basic logic circuit design, the inverse DSA problem, design decomposition and the modelling and analysis of large scale, template self-assembly manufacturing techniques. - Authoritative outlining of theoretical principles and modeling techniques to give a thorough introdution to the topic - Discusses a broad range of practical applications for directed self-assembly in nano-manufacturing - Highlights the importance of this technology to both the present and future of nano-manufacturing by exploring its potential use in a range of fields

Download or read book Advances in Delay tolerant Networks DTNs written by Joel J.P.C. Rodrigues and published by Elsevier. This book was released on 2014-11-20 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part one looks at delay-tolerant network architectures and platforms including DTN for satellite communications and deep-space communications, underwater networks, networks in developing countries, vehicular networks and emergency communications. Part two covers delay-tolerant network routing, including issues such as congestion control, naming, addressing and interoperability. Part three explores services and applications in delay-tolerant networks, such as web browsing, social networking and data streaming. Part four discusses enhancing the performance, reliability, privacy and security of delay-tolerant networks. Chapters cover resource sharing, simulation and modeling and testbeds. - Reviews the different types of DTN and shows how they can be applied in satellite and deep-space communications, vehicular and underwater communications, and during large-scale disasters - Considers the potential for rapid selection and dissemination of urgent messages is considered - Reviews the breadth of areas in which DTN is already providing solutions and the prospects for its wider adoption

Download or read book Power Ultrasonics written by Juan A. Gallego-Juarez and published by Elsevier. This book was released on 2014-11-14 with total page 1167 pages. Available in PDF, EPUB and Kindle. Book excerpt: The industrial interest in ultrasonic processing has revived during recent years because ultrasonic technology may represent a flexible "green alternative for more energy efficient processes. A challenge in the application of high-intensity ultrasound to industrial processing is the design and development of specific power ultrasonic systems for large scale operation. In the area of ultrasonic processing in fluid and multiphase media the development of a new family of power generators with extensive radiating surfaces has significantly contributed to the implementation at industrial scale of several applications in sectors such as the food industry, environment, and manufacturing. Part one covers fundamentals of nonlinear propagation of ultrasonic waves in fluids and solids. It also discusses the materials and designs of power ultrasonic transducers and devices. Part two looks at applications of high power ultrasound in materials engineering and mechanical engineering, food processing technology, environmental monitoring and remediation and industrial and chemical processing (including pharmaceuticals), medicine and biotechnology. - Covers the fundamentals of nonlinear propagation of ultrasonic waves in fluids and solids. - Discusses the materials and designs of power ultrasonic transducers and devices. - Considers state-of-the-art power sonic applications across a wide range of industries.

Download or read book Machine to machine M2M Communications written by Carles Anton-Haro and published by Elsevier. This book was released on 2014-12-23 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part one of Machine-to-Machine (M2M) Communications covers machine-to-machine systems, architecture and components. Part two assesses performance management techniques for M2M communications. Part three looks at M2M applications, services, and standardization. Machine-to-machine communications refers to autonomous communication between devices or machines. This book serves as a key resource in M2M, which is set to grow significantly and is expected to generate a huge amount of additional data traffic and new revenue streams, underpinning key areas of the economy such as the smart grid, networked homes, healthcare and transportation. - Examines the opportunities in M2M for businesses - Analyses the optimisation and development of M2M communications - Chapters cover aspects of access, scheduling, mobility and security protocols within M2M communications

Download or read book Ecological Design of Smart Home Networks written by N. Saito and published by Elsevier. This book was released on 2015-03-31 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an authoritative guide for postgraduate students and academic researchers in electronics, computer and network engineering, telecommunications, energy technology and home automation, as well as R&D managers in industrial sectors such as wireless technology, consumer electronics, telecommunications and networking, information technology, energy technology and home automation. Part One outlines the key principles and technologies needed for ecological smart home networks. Beginning with a thorough overview of the concept behind ecological smart home network design, the book reviews such important areas as power line communications, hybrid systems and middleware platforms. Part Two then goes on to discuss some important applications of this technology, with wireless smart sensor networks for home and telecare, and smart home networking for content and energy management (including the intelligent Zero Emission Urban System), all explored in detail. - More systematic and comprehensive coverage: the book covers ecological design and technology requirements, performance and applications for smart home networks - Better focus on industry needs: the book covers current and emerging smart home networking technologies. It explains how the technologies work, how they have developed, their capabilities and the markets that they target - Better coverage of the best international research: the book is multi-contributor and brings together the leading researchers from around the world

Download or read book Reliability Characterisation of Electrical and Electronic Systems written by and published by Elsevier. This book was released on 2014-12-24 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book takes a holistic approach to reliability engineering for electrical and electronic systems by looking at the failure mechanisms, testing methods, failure analysis, characterisation techniques and prediction models that can be used to increase reliability for a range of devices. The text describes the reliability behavior of electrical and electronic systems. It takes an empirical scientific approach to reliability engineering to facilitate a greater understanding of operating conditions, failure mechanisms and the need for testing for a more realistic characterisation. After introducing the fundamentals and background to reliability theory, the text moves on to describe the methods of reliability analysis and charactersation across a wide range of applications. Takes a holistic approach to reliability engineering Looks at the failure mechanisms, testing methods, failure analysis, characterisation techniques and prediction models that can be used to increase reliability Facilitates a greater understanding of operating conditions, failure mechanisms and the need for testing for a more realistic characterisation

Download or read book Handbook of Liquids Assisted Laser Processing written by Arvi Kruusing and published by Elsevier. This book was released on 2010-07-07 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser processing of solid materials has been commonly performed in gas ambient. Having the workpiece immersed into liquid, having a liquid film on it, or soaking the material with liquid gives several advantages such as removal of the debris, lowering the heat load on the workpiece, and confining the vapour and plasma, resulting in higher shock pressure on the surface. Introduced in the 1980s, neutral liquids assisted laser processing (LALP) has proved to be advantageous in the cutting of heat-sensitive materials, shock peening of machine parts, cleaning of surfaces, fabrication of micro-optical components, and for generation of nanoparticles in liquids. The liquids used range from water through organic solvents to cryoliquids. The primary aim of Handbook of Liquids-Assisted Laser Processing is to present the essentials of previous research (tabulated data of experimental conditions and results), and help researchers develop new processing and diagnostics techniques (presenting data of liquids and a review of physical phenomena associated with LALP). Engineers can use the research results and technological innovation information to plan their materials processing tasks. Laser processing in liquids has been applied to a number of different tasks in various fields such as mechanical engineering, microengineering, chemistry, optics, and bioscience. A comprehensive glossary with definitions of the terms and explanations has been added. The book covers the use of chemically inert liquids under normal conditions. Laser chemical processing examples are presented for comparison only. - First book in this rapidly growing field impacting mechanical and micro/nano-engineering - Covers different kinds of liquid-assisted laser processing of a large variety of materials - Covers lasers emitting from UV to IR with pulse lengths down to femtoseconds - Reviews over 500 scientific articles and 300 inventions and tabulates their main features - Gives a qualitative and quantitative description of the physical phenomena associated with LALP - Tabulates 61 parameters for 100 liquids - Glossary of over 200 terms and abbreviations

Download or read book Laser Additive Manufacturing written by Milan Brandt and published by Woodhead Publishing. This book was released on 2016-09-01 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Additive Manufacturing: Materials, Design, Technologies, and Applications provides the latest information on this highly efficient method of layer-based manufacturing using metals, plastics, or composite materials. The technology is particularly suitable for the production of complex components with high precision for a range of industries, including aerospace, automotive, and medical engineering. This book provides a comprehensive review of the technology and its range of applications. Part One looks at materials suitable for laser AM processes, with Part Two discussing design strategies for AM. Parts Three and Four review the most widely-used AM technique, powder bed fusion (PBF) and discuss other AM techniques, such as directed energy deposition, sheet lamination, jetting techniques, extrusion techniques, and vat photopolymerization. The final section explores the range of applications of laser AM. Provides a comprehensive one-volume overview of advances in laser additive manufacturing Presents detailed coverage of the latest techniques used for laser additive manufacturing Reviews both established and emerging areas of application