Download or read book Laser Drying Of Graphite Anodes For The Production Of Lithium Ion Batteries A Process And Material Side Analysis For Sustainable Battery Production written by Sebastian Wolf and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Micro Nano Manufacturing and 3D Microprinting written by Anming Hu and published by Springer Nature. This book was released on 2020-11-28 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the latest advances in laser techniques for micro-nano-manufacturing and an in-depth analysis of applications, such as 3D printing and nanojoining. Lasers have gained increasing significance as a precise tool for advanced manufacturing. Written by world leading scientists, the first part of the book presents the fundamentals of laser interaction with materials at the micro- and nanoscale, including multiphoton excitation and nonthermal melting, and allows readers to better understand advanced processing. In the second part, the authors focus on various advanced fabrications, such as laser peening, surface nanoengineering, and plasmonic heating. Finally, case studies are devoted to special applications, such as 3D printing, microfluidics devices, energy devices, and plasmonic and photonic waveguides. This book integrates both theoretical and experimental analysis. The combination of tutorial chapters and concentrated case studies will be critically attractive to undergraduate and graduate students, researchers, and engineers in the relevant fields. Readers will grasp the full picture of the application of laser for micro-nanomanufacturing and 3D printing.
Download or read book Recycling of Lithium Ion Batteries written by Arno Kwade and published by Springer. This book was released on 2017-12-12 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses recycling technologies for many of the valuable and scarce materials from spent lithium-ion batteries. A successful transition to electric mobility will result in large volumes of these. The book discusses engineering issues in the entire process chain from disassembly over mechanical conditioning to chemical treatment. A framework for environmental and economic evaluation is presented and recommendations for researchers as well as for potential operators are derived.
Download or read book Lithium Ion Batteries written by Masaki Yoshio and published by Springer Science & Business Media. This book was released on 2010-07-17 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here in a single source is an up-to-date description of the technology associated with the Li-Ion battery industry. It will be useful as a text for researchers interested in energy conversion for the direct conversion of chemical energy into electrical energy.
Download or read book Lithium ion Batteries written by and published by . This book was released on 2019 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This is the first machine-generated scientific book in chemistry published by Springer Nature. Serving as an innovative prototype defining the current status of the technology, it also provides an overview about the latest trends of lithium-ion batteries research. This book explores future ways of informing researchers and professionals. State-of-the-art computer algorithms were applied to: select relevant sources from Springer Nature publications, arrange these in a topical order, and provide succinct summaries of these articles. The result is a cross-corpora auto-summarization of current texts, organized by means of a similarity-based clustering routine in coherent chapters and sections. This book summarizes more than 150 research articles published from 2016 to 2018 and provides an informative and concise overview of recent research into anode and cathode materials as well as further aspects such as separators, polymer electrolytes, thermal behavior and modelling. With this prototype, Springer Nature has begun an innovative journey to explore the field of machine-generated content and to find answers to the manifold questions on this fascinating topic. Therefore it was intentionally decided not to manually polish or copy-edit any of the texts so as to highlight the current status and remaining boundaries of machine-generated content. Our goal is to initiate a broad discussion, together with the research community and domain experts, about the future opportunities, challenges and limitations of this technology."--Publisher's website.
Download or read book Lithium ion Battery Materials and Engineering written by Malgorzata K. Gulbinska and published by Springer. This book was released on 2014-09-06 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gaining public attention due, in part, to their potential application as energy storage devices in cars, Lithium-ion batteries have encountered widespread demand, however, the understanding of lithium-ion technology has often lagged behind production. This book defines the most commonly encountered challenges from the perspective of a high-end lithium-ion manufacturer with two decades of experience with lithium-ion batteries and over six decades of experience with batteries of other chemistries. Authors with years of experience in the applied science and engineering of lithium-ion batteries gather to share their view on where lithium-ion technology stands now, what are the main challenges, and their possible solutions. The book contains real-life examples of how a subtle change in cell components can have a considerable effect on cell’s performance. Examples are supported with approachable basic science commentaries. Providing a unique combination of practical know-how with an in-depth perspective, this book will appeal to graduate students, young faculty members, or others interested in the current research and development trends in lithium-ion technology.
Download or read book Handbook of Batteries written by David Linden and published by McGraw-Hill Professional. This book was released on 2002 with total page 1516 pages. Available in PDF, EPUB and Kindle. Book excerpt: BETTER BATTERIES Smaller, lighter, more powerful, and longer-lasting: the better battery is a much-sought commodity in the increasingly portable, ever-more-wireless world of electronics. Powering laptops, handhelds, cell phones, pagers, watches, medical devices, and many other modern necessitites, batteries are crucial to today's cutting-edge technologies. BEST CHOICE FOR BATTERY DESIGN AND EVALUATION This definitive guide from top international experts provides the best technical guidance you can find on designing winning products and selecting the most appropriate batteries for particular applications. HANDBOOK OF BATTERIES covers the field from the tiniest batteries yet devised for life-critical applications to the large batteries required for electric and hybrid electric vehicles. EXPERT INFORMATION Edited by battery experts David Linden, battery consultant and editor of the first two editions, and Dr. Thomas Reddy, a pioneer in the lithium battery field, HANDBOOK OF BATTERIES updates you on current methods, helps you solve problems, and makes comparisons easier. Essential for professionals, valuable to hobbyists, and preferred as a consumer guide for battery purchasers, this the THE source for battery information. The only comprehensive reference in the field, HANDBOOK OF BATTERIES has more authoritative information than any other source: * Authored by a team of leading battery technology experts from around the globe * Covers the characteristics, properties, and performance of every major battery type * Entirely revised, including new information on Lithium Ion and Large Nickel Metal Hydride batteries, and portable fuel cells. This one-of-a-kind HANDBOOK helps you: * Apply leading-edge technologies, materials, and methods in new designs and products * Predict battery performance under any conditions * Have all the needed data and equations at your fingertips
Download or read book Handbook Of Solid State Batteries Second Edition written by Nancy J Dudney and published by World Scientific. This book was released on 2015-07-09 with total page 835 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid-state batteries hold the promise of providing energy storage with high volumetric and gravimetric energy densities at high power densities, yet with far less safety issues relative to those associated with conventional liquid or gel-based lithium-ion batteries. Solid-state batteries are envisioned to be useful for a broad spectrum of energy storage applications, including powering automobiles and portable electronic devices, as well as stationary storage and load-leveling of renewably generated energy. This comprehensive handbook covers a wide range of topics related to solid-state batteries, including advanced enabling characterization techniques, fundamentals of solid-state systems, novel solid electrolyte systems, interfaces, cell-level studies, and three-dimensional architectures. It is directed at physicists, chemists, materials scientists, electrochemists, electrical engineers, battery technologists, and evaluators of present and future generations of power sources. This handbook serves as a reference text providing state-of-the-art reviews on solid-state battery technologies, as well as providing insights into likely future developments in the field. It is extensively annotated with comprehensive references useful to the student and practitioners in the field.
Download or read book Energy Storage Devices written by M. Taha Demirkan and published by BoD – Books on Demand. This book was released on 2019-12-18 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy storage will be a very important part of the near future, and its effectiveness will be crucial for most future technologies. Energy can be stored in several different ways and these differ in terms of the type and the conversion method of the energy. Among those methods; chemical, mechanical, and thermal energy storage are some of the most favorable methods for containing energy. Current energy storage devices are still far from meeting the demands of new technological developments. Therefore, much effort has been put to improving the performance of different types of energy storage technologies in the last few decades.
Download or read book Materials for Lithium Ion Batteries written by Christian Julien and published by Springer Science & Business Media. This book was released on 2000-10-31 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: A lithium-ion battery comprises essentially three components: two intercalation compounds as positive and negative electrodes, separated by an ionic-electronic electrolyte. Each component is discussed in sufficient detail to give the practising engineer an understanding of the subject, providing guidance on the selection of suitable materials in actual applications. Each topic covered is written by an expert, reflecting many years of experience in research and applications. Each topic is provided with an extensive list of references, allowing easy access to further information. Readership: Research students and engineers seeking an expert review. Graduate courses in electrical drives can also be designed around the book by selecting sections for discussion. The coverage and treatment make the book indispensable for the lithium battery community.
Download or read book Lithium Ion Batteries Basics and Applications written by Reiner Korthauer and published by Springer. This book was released on 2018-08-07 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The handbook focuses on a complete outline of lithium-ion batteries. Just before starting with an exposition of the fundamentals of this system, the book gives a short explanation of the newest cell generation. The most important elements are described as negative / positive electrode materials, electrolytes, seals and separators. The battery disconnect unit and the battery management system are important parts of modern lithium-ion batteries. An economical, faultless and efficient battery production is a must today and is represented with one chapter in the handbook. Cross-cutting issues like electrical, chemical, functional safety are further topics. Last but not least standards and transportation themes are the final chapters of the handbook. The different topics of the handbook provide a good knowledge base not only for those working daily on electrochemical energy storage, but also to scientists, engineers and students concerned in modern battery systems.
Download or read book Applications of Process Engineering Principles in Materials Processing Energy and Environmental Technologies written by Shijie Wang and published by Springer. This book was released on 2017-02-07 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection offers new research findings, innovations, and industrial technological developments in extractive metallurgy, energy and environment, and materials processing. Technical topics included in the book are thermodynamics and kinetics of metallurgical reactions, electrochemical processing of materials, plasma processing of materials, composite materials, ionic liquids, thermal energy storage, energy efficient and environmental cleaner technologies and process modeling. These topics are of interest not only to traditional base ferrous and non-ferrous metal industrial processes but also to new and upcoming technologies, and they play important roles in industrial growth and economy worldwide.
Download or read book Printed Batteries written by Senentxu Lanceros-Méndez and published by John Wiley & Sons. This book was released on 2018-04-23 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers the first comprehensive account of this interesting and growing research field Printed Batteries: Materials, Technologies and Applications reviews the current state of the art for printed batteries, discussing the different types and materials, and describing the printing techniques. It addresses the main applications that are being developed for printed batteries as well as the major advantages and remaining challenges that exist in this rapidly evolving area of research. It is the first book on printed batteries that seeks to promote a deeper understanding of this increasingly relevant research and application area. It is written in a way so as to interest and motivate readers to tackle the many challenges that lie ahead so that the entire research community can provide the world with a bright, innovative future in the area of printed batteries. Topics covered in Printed Batteries include, Printed Batteries: Definition, Types and Advantages; Printing Techniques for Batteries, Including 3D Printing; Inks Formulation and Properties for Printing Techniques; Rheological Properties for Electrode Slurry; Solid Polymer Electrolytes for Printed Batteries; Printed Battery Design; and Printed Battery Applications. Covers everything readers need to know about the materials and techniques required for printed batteries Informs on the applications for printed batteries and what the benefits are Discusses the challenges that lie ahead as innovators continue with their research Printed Batteries: Materials, Technologies and Applications is a unique and informative book that will appeal to academic researchers, industrial scientists, and engineers working in the areas of sensors, actuators, energy storage, and printed electronics.
Download or read book PbZn 2020 9th International Symposium on Lead and Zinc Processing written by A. Siegmund and published by Springer Nature. This book was released on 2020-01-24 with total page 937 pages. Available in PDF, EPUB and Kindle. Book excerpt: Established in 1970, the PbZn symposium series is considered the leading international technical forum for the lead and zinc processing industries. The PbZn 2020 volume addresses all aspects of current processing technologies for primary and secondary lead and zinc, as well as emerging technologies for both metals.
Download or read book Electro Fenton Process written by Minghua Zhou and published by Springer. This book was released on 2017-11-25 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume discusses the theoretical fundamentals and potential applications of the original electro-Fenton (EF) process and its most innovative and promising versions, all of which are classified as electrochemical advanced oxidation processes. It consists of 15 chapters that review the latest advances and trends, material selection, reaction and reactor modeling and EF scale-up. It particularly focuses on the applications of EF process in the treatment of toxic and persistent organic pollutants in water and soil, showing highly efficient removal for both lab-scale and pre-pilot setups. Indeed, the EF technology is now mature enough to be brought to market, and this collection of contributions from leading experts in the field constitutes a timely milestone for scientists and engineers.
Download or read book Industrial Applications of Batteries written by Michel Broussely and published by Elsevier. This book was released on 2007-02-13 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Applications of Batteries looks at both the applications and the batteries and covers the relevant scientific and technological features. Presenting large batteries for stationary applications, e.g. energy storage, and also batteries for hybrid vehicles or different tools. The important aerospace field is covered both in connection with satellites and space missions. Examples of applications include, telecommunications, uninterruptible power supplies, systems for safety/alarms, car accessories, toll collection, asset tracking systems, medical equipment, and oil drilling.The first chapter on applications deals with electric and hybrid vehicles. Four chapters are devoted to stationary applications, i.e. energy storage (from the electric grid or solar/wind energy), load levelling, telecommunications, uninterruptible power supplies, back-up for safety/alarms. Battery management by intelligent systems and prediction of battery life are dealt with in a dedicated chapter. The topic of used battery collection and recycling, with the description of specific treatments for the different systems, is also extensively treated in view of its environmental relevance. Finally, the world market of these batteries is presented, with detailed figures for the various applications.* Updated and full overview of the power sources for industries* Written by leading scientists in their fields * Well balanced in terms of scientific and technical information
Download or read book Advances in Batteries for Medium and Large Scale Energy Storage written by C Menictas and published by Elsevier. This book was released on 2014-12-09 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: As energy produced from renewable sources is increasingly integrated into the electricity grid, interest in energy storage technologies for grid stabilisation is growing. This book reviews advances in battery technologies and applications for medium and large-scale energy storage. Chapters address advances in nickel, sodium and lithium-based batteries. Other chapters review other emerging battery technologies such as metal-air batteries and flow batteries. The final section of the book discuses design considerations and applications of batteries in remote locations and for grid-scale storage. - Reviews advances in battery technologies and applications for medium and large-scale energy storage - Examines battery types, including zing-based, lithium-air and vanadium redox flow batteries - Analyses design issues and applications of these technologies
