Download or read book Biomass Combustion Science Technology and Engineering written by Lasse Rosendahl and published by Elsevier. This book was released on 2013-04-04 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: The utilisation of biomass is increasingly important for low- or zero-carbon power generation. Developments in conventional power plant fuel flexibility allow for both direct biomass combustion and co-firing with fossil fuels, while the integration of advanced technologies facilitates conversion of a wide range of biomass feedstocks into more readily combustible fuel. Biomass combustion science, technology and engineering reviews the science and technology of biomass combustion, conversion and utilisation.Part one provides an introduction to biomass supply chains and feedstocks, and outlines the principles of biomass combustion for power generation. Chapters also describe the categorisation and preparation of biomass feedstocks for combustion and gasification. Part two goes on to explore biomass combustion and co-firing, including direct combustion of biomass, biomass co-firing and gasification, fast pyrolysis of biomass for the production of liquids and intermediate pyrolysis technologies. Largescale biomass combustion and biorefineries are then the focus of part three. Following an overview of large-scale biomass combustion plants, key engineering issues and plant operation are discussed, before the book concludes with a chapter looking at the role of biorefineries in increasing the value of the end-products of biomass conversion.With its distinguished editor and international team of expert contributors, Biomass combustion science, technology and engineering provides a clear overview of this important area for all power plant operators, industrial engineers, biomass researchers, process chemists and academics working in this field. - Reviews the science and technology of biomass combustion, conversion and utilisation - Provides an introduction to biomass supply chains and feedstocks and outlines the principles of biomass combustion for power generation - Describes the categorisation and preparation of biomass feedstocks for combustion and gasification

Download or read book Renewable Energy Systems written by Martin Kaltschmitt and published by Springer. This book was released on 2012-12-06 with total page 1898 pages. Available in PDF, EPUB and Kindle. Book excerpt: Humanity is facing a steadily diminishing supply of fossil fuels, causing researchers, policy makers, and the population as a whole to turn increasingly to alternative and especially renewable sources of energy to make up this deficit. Gathering over 80 peer-reviewed entries from the Encyclopedia of Sustainability Science and Technologies, Renewable Energy Systems provides an authoritative introduction to a wide variety of renewable energy sources. State-of-the-art coverage includes geothermal power stations, ocean energy, renewable energy from biomass, waste to energy, and wind power. This comprehensive, two-volume work provides an excellent introduction for those entering these fields, as well as new insights for advanced researchers, industry experts, and decision makers.

Download or read book The Power of Renewables written by Chinese Academy of Engineering and published by National Academies Press. This book was released on 2011-01-29 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: The United States and China are the world's top two energy consumers and, as of 2010, the two largest economies. Consequently, they have a decisive role to play in the world's clean energy future. Both countries are also motivated by related goals, namely diversified energy portfolios, job creation, energy security, and pollution reduction, making renewable energy development an important strategy with wide-ranging implications. Given the size of their energy markets, any substantial progress the two countries make in advancing use of renewable energy will provide global benefits, in terms of enhanced technological understanding, reduced costs through expanded deployment, and reduced greenhouse gas (GHG) emissions relative to conventional generation from fossil fuels. Within this context, the U.S. National Academies, in collaboration with the Chinese Academy of Sciences (CAS) and Chinese Academy of Engineering (CAE), reviewed renewable energy development and deployment in the two countries, to highlight prospects for collaboration across the research to deployment chain and to suggest strategies which would promote more rapid and economical attainment of renewable energy goals. Main findings and concerning renewable resource assessments, technology development, environmental impacts, market infrastructure, among others, are presented. Specific recommendations have been limited to those judged to be most likely to accelerate the pace of deployment, increase cost-competitiveness, or shape the future market for renewable energy. The recommendations presented here are also pragmatic and achievable.

Download or read book Large Scale Biomass Combustion Plants written by Sébastien Caillat and published by Butterworth-Heinemann. This book was released on 2017-11-01 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Large Scale Biomass Combustion Plants addresses the main issues of large biomass combustion plants for heat and power generation. Its authors use their experience in academia and the industry to provide both theoretical concepts and practical information. They explore types of fuels and their main characteristics, fuel preparation, storage and handling, describe the main elements of the system (feeding, combustion chamber, ash extraction, heat exchangers) for current biomass power plants technologies, such as grate fired, fluidized bed, pulverized fuels, including co-combustion with coal. Operation, maintenance and safety aspects are examined, as well as gaseous and solid emissions, environmental impact, regulation and policy. Case studies illustrate each topic, focusing on best practices, enriched with academic background when appropriate. Fact sheets summarize useful concepts for day-to-day operations. This is an excellent resource for power and energy engineers, technicians, researchers and students working in the field of heat and power generation, particularly using biomass and biofuels. Energy project managers, regulators, plant owners and manufacturers will also find this a useful reference. Presents a comprehensive description of large biomass combustion plants, from 20MW to 100 MW, from the door to the chimney Offers practical guidelines through different issues related to biomass power plants, collected from designers, operators, regulation inspectors and academia Explores operation, maintenance and safety aspects

Download or read book The Handbook of Biomass Combustion and Co firing written by Jaap Koppejan and published by Earthscan. This book was released on 2012-05-16 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique handbook presents both the theory and application of biomass combustion and co-firing, from basic principles to industrial combustion and environmental impact, in a clear and comprehensive manner. It offers a solid grounding on biomass combustion, and advice on improving combustion systems.Written by leading international academics and industrial experts, and prepared under the auspices of the IEA Bioenergy Implementing Agreement, the handbook is an essential resource for anyone interested in biomass combustion and co-firing technologies varying from domestic woodstoves to utility-scale power generation. The book covers subjects including biomass fuel pre-treatment and logistics, modelling the combustion process and ash-related issues, as well as featuring an overview of the current R&D needs regarding biomass combustion.

Download or read book Negative Emissions Technologies and Reliable Sequestration written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-04-08 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: To achieve goals for climate and economic growth, "negative emissions technologies" (NETs) that remove and sequester carbon dioxide from the air will need to play a significant role in mitigating climate change. Unlike carbon capture and storage technologies that remove carbon dioxide emissions directly from large point sources such as coal power plants, NETs remove carbon dioxide directly from the atmosphere or enhance natural carbon sinks. Storing the carbon dioxide from NETs has the same impact on the atmosphere and climate as simultaneously preventing an equal amount of carbon dioxide from being emitted. Recent analyses found that deploying NETs may be less expensive and less disruptive than reducing some emissions, such as a substantial portion of agricultural and land-use emissions and some transportation emissions. In 2015, the National Academies published Climate Intervention: Carbon Dioxide Removal and Reliable Sequestration, which described and initially assessed NETs and sequestration technologies. This report acknowledged the relative paucity of research on NETs and recommended development of a research agenda that covers all aspects of NETs from fundamental science to full-scale deployment. To address this need, Negative Emissions Technologies and Reliable Sequestration: A Research Agenda assesses the benefits, risks, and "sustainable scale potential" for NETs and sequestration. This report also defines the essential components of a research and development program, including its estimated costs and potential impact.

Download or read book Solid Biofuels for Energy written by Panagiotis Grammelis and published by Springer Science & Business Media. This book was released on 2010-10-22 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fossil fuels are widely used for electricity generation and heating, creating greenhouse gas emissions and other toxic pollutants, which should be minimised according to the most recent environmental legislation. The utilisation of solid fuels with biogenic origin could contribute to the minimisation of these emissions. Solid Biofuels for Energy presents the current status of the engineering disciplines in this specific area, providing an improved background on the energy exploitation options of solid biomass. Within this framework, all thematic priorities related to the solid bioenergy potential and standardisation, commercialised and emerging energy technologies, and quality of solid residues are presented. Special attention has been given to biomass co-firing with coal, since it has the highest potential for commercial application, while combustion and gasification are more promising for units of medium to small scale. This strong practical focus is evident throughout the book, particularly in discussions of: • international standards for solid biofuel specifications; • supply, cost and sustainability of solid biofuels; • technical issues and non-technical barriers in biomass/coal co-firing; and • biomass combustion and gasification characteristics. Solid Biofuels for Energy is an informative reference, written for researchers and postgraduate students working in the field of biomass. It can also be a useful guide for chemical and mechanical engineers, involved in the environment and energy production sectors.

Download or read book Developments in Thermochemical Biomass Conversion written by A.V. Bridgwater and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 1630 pages. Available in PDF, EPUB and Kindle. Book excerpt: There have been many developments in the science and technology of thermo chemical biomass conversion since the previous conference on Advances in Thermochemical Biomass Conversion in Interlaken, Switzerland, in 1992. This fourth conference again covers all aspects of thermal biomass conversion systems from fundamental research through applied research and development to demon stration and commercial applications to reflect the progress made in the last four years. All aspects of bioenergy systems are covered from pretreatment through to end-user applications with increased consideration paid to the environmental benefits and problems of implementing bio-energy systems. There was an excellent response with over 200 papers offered and over 180 delegates from 29 countries attending the conference. The programme was divided into five main areas covering pyrolysis, pretreatment, gasification, combustion and system studies and this division is reflected in the structure of these conference proceedings. Each main section was preceded by a state-of-the-art review to provide a focus for the ensuing presentations and an authoritative reference. All the papers included have been subject to a full peer review process. As with any international conference, an important aim was to exchange ideas and discuss problems with fellow researchers, as well as to hear about the latest research and development and applications. A workshop programme was included to encourage this interaction in areas of interest selected by participants. The resul tant workshop reports provide a summary of topical problems and opportunities.

Download or read book Pollutants Generated by the Combustion of Solid Biomass Fuels written by Jenny M Jones and published by Springer. This book was released on 2014-11-04 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book considers the pollutants formed by the combustion of solid biomass fuels. The availability and potential use of solid biofuels is first discussed because this is the key to the development of biomass as a source of energy. This is followed by details of the methods used for characterisation of biomass and their classification. The various steps in the combustion mechanisms are given together with a compilation of the kinetic data. The chemical mechanisms for the formation of the pollutants: NOx, smoke and unburned hydrocarbons, SOx, Cl compounds, and particulate metal aerosols are given in detail. Combustion kinetics required for the application for design purposes are given. Examples are given of emission levels of a range different types of combustion equipment. Data is given of NOx, particulates and other pollutant arising from combustion of different fuels in fixed bed combustion, fluidized bed combustion and pulverised biomass combustion and co-firing. Modeling methods including computational fluid dynamics for the various pollutants are outlined. The consequential issues arising from the wide scale use of biomass and future trends are then discussed. In particular the role of carbon capture and storage in large biomass combustion plants is considered as well as the opportunity of reducing the concentration of atmospheric concentration of carbon dioxide.

Download or read book Biomass combustion science technology and engineering written by S. Caillat and published by Elsevier Inc. Chapters. This book was released on 2013-04-04 with total page 45 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a long time biomass was combusted mostly on a small scale. Now the largest biomass boilers are over 500 MWth. This chapter tries to outline the main methods for large-scale biomass combustion. The main boiler types are the grate and bubbling-fluidised bed boilers although circulating-fluidised bed and pulverised firing do play a role. Particular emphasis has been placed on emissions, the effect of fuel quality and operating issues.

Download or read book Climate Intervention written by National Research Council and published by National Academies Press. This book was released on 2015-06-17 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: The signals are everywhere that our planet is experiencing significant climate change. It is clear that we need to reduce the emissions of carbon dioxide and other greenhouse gases from our atmosphere if we want to avoid greatly increased risk of damage from climate change. Aggressively pursuing a program of emissions abatement or mitigation will show results over a timescale of many decades. How do we actively remove carbon dioxide from the atmosphere to make a bigger difference more quickly? As one of a two-book report, this volume of Climate Intervention discusses CDR, the carbon dioxide removal of greenhouse gas emissions from the atmosphere and sequestration of it in perpetuity. Climate Intervention: Carbon Dioxide Removal and Reliable Sequestration introduces possible CDR approaches and then discusses them in depth. Land management practices, such as low-till agriculture, reforestation and afforestation, ocean iron fertilization, and land-and-ocean-based accelerated weathering, could amplify the rates of processes that are already occurring as part of the natural carbon cycle. Other CDR approaches, such as bioenergy with carbon capture and sequestration, direct air capture and sequestration, and traditional carbon capture and sequestration, seek to capture CO2 from the atmosphere and dispose of it by pumping it underground at high pressure. This book looks at the pros and cons of these options and estimates possible rates of removal and total amounts that might be removed via these methods. With whatever portfolio of technologies the transition is achieved, eliminating the carbon dioxide emissions from the global energy and transportation systems will pose an enormous technical, economic, and social challenge that will likely take decades of concerted effort to achieve. Climate Intervention: Carbon Dioxide Removal and Reliable Sequestration will help to better understand the potential cost and performance of CDR strategies to inform debate and decision making as we work to stabilize and reduce atmospheric concentrations of carbon dioxide.

Download or read book Developments in Combustion Technology written by Konstantinos Kyprianidis and published by BoD – Books on Demand. This book was released on 2016-10-05 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past few decades, exciting developments have taken place in the field of combustion technology. The present edited volume intends to cover recent developments and provide a broad perspective of the key challenges that characterize the field. The target audience for this book includes engineers involved in combustion system design, operational planning and maintenance. Manufacturers and combustion technology researchers will also benefit from the timely and accurate information provided in this work. The volume is organized into five main sections comprising 15 chapters overall: - Coal and Biofuel Combustion - Waste Combustion - Combustion and Biofuels in Reciprocating Engines - Chemical Looping and Catalysis - Fundamental and Emerging Topics in Combustion Technology

Download or read book Biomass combustion science technology and engineering written by H. Widell and published by Elsevier Inc. Chapters. This book was released on 2013-04-04 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass-fired steam boilers are finding increasing use in industrial-scale applications for both heat and power generation. This chapter compares the main technologies for biomass combustion – spreader stoker, mass burn and biomass bubbling fluidised bed (BFB)/circulating fluidised bed (CFB) – and discusses specific issues to be addressed in the design of biomass-fired steam boiler plants. Examples of recent biomass-to-energy plants are given in order to illustrate how project-specific factors influenced the design. A section is dedicated to non-wood biomass fuels and how their characteristics affect plant design. Conversion of existing coal-fired boilers to biomass firing is also discussed. The final part of the chapter deals with operational issues of biomass-fired plants.

Download or read book Gasification for Low grade Feedstock written by Yongseung Yun and published by BoD – Books on Demand. This book was released on 2018-07-11 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most coveted energy forms nowadays are gas in nature and electricity due to their environmental cleanness and convenience. Recently, gasification market trend is starting to switch to low-grade feedstock such as biomass, wastes, and low-rank coal that are still not properly utilized. In this sense, the most promising area of development in gasification field lies in low-grade feedstock that should be converted to more user-friendly gas or electricity form in utilization. This book tried to shed light on the works on gasification from many parts of the world and thus can feel the technology status and the areas of interest regarding gasification for low-grade feedstock.

Download or read book Proceedings of the 20th International Conference on Fluidized Bed Combustion written by Guangxi Yue and published by Springer Science & Business Media. This book was released on 2010-07-28 with total page 1186 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the 20th International Conference on Fluidized Bed Combustion (FBC) collect 9 plenary lectures and 175 peer-reviewed technical papers presented in the conference held in Xi'an China in May 18-21,2009. The conference was the 20th conference in a series, covering the latest fundamental research results, as well as the application experience from pilot plants, demonstrations and industrial units regarding to the FBC science and technology. It was co-hosted by Tsinghua University, Southeast University, Zhejiang University, China Electricity Council and Chinese Machinery Industry Federation. A particular feature of the proceedings is the balance between the papers submitted by experts from industry and the papers submitted by academic researchers, aiming to bring academic knowledge to application as well as to define new areas for research. The authors of the proceedings are the most active researchers, technology developers, experienced and representative facility operators and manufacturers. They presented the latest research results, state-of-the-art development and projects, and the useful experience. The proceedings are divided into following sections: • CFB Boiler Technology, Operation and Design • Fundamental Research on Fluidization and Fluidized Combustion • C02 Capture and Chemical Looping • Gasification • Modeling and Simulation on FBC Technology • Environments and Pollutant Control • Sustainable Fuels The proceedings can be served as idea references for researchers, engineers, academia and graduate students, plant operators, boiler manufacturers, component suppliers, and technical managers who work on FBC fundamental research, technology development and industrial application.

Download or read book Biomass combustion science technology and engineering written by J.P. Wolf and published by Elsevier Inc. Chapters. This book was released on 2013-04-04 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chapter gives an introduction to the main combustion techniques used for turning biomass into power and briefly discusses their relative strengths and weaknesses. The chapter also provides definitions of the main biomass types and discusses recent developments in the application of biomass for power production.

Download or read book Biomass Combustion Systems written by A. S. Tariq and published by Hyperion Books. This book was released on 1994 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: A publication which will be of interest to plant operators and researchers in the field of biomass combustion. It is part of a continuing effort to improve the efficient use of fuelwood and where possible, to encourage replacement of fuelwood with agricultural and forestry residues.