Download or read book Lane Precise Localization with Production Vehicle Sensors and Application to Augmented Reality Navigation written by Rabe, Johannes and published by KIT Scientific Publishing. This book was released on 2019-01-10 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: This works describes an approach to lane-precise localization on current digital maps. A particle filter fuses data from production vehicle sensors, such as GPS, radar, and camera. Performance evaluations on more than 200 km of data show that the proposed algorithm can reliably determine the current lane. Furthermore, a possible architecture for an intuitive route guidance system based on Augmented Reality is proposed together with a lane-change recommendation for unclear situations.
Download or read book Lane Precise Localization With Production Vehicle Sensors and Application to Augmented Reality Navigation written by Johannes Rabe and published by . This book was released on 2020-10-09 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This works describes an approach to lane-precise localization on current digital maps. A particle filter fuses data from production vehicle sensors, such as GPS, radar, and camera. Performance evaluations on more than 200 km of data show that the proposed algorithm can reliably determine the current lane. Furthermore, a possible architecture for an intuitive route guidance system based on Augmented Reality is proposed together with a lane-change recommendation for unclear situations. This work was published by Saint Philip Street Press pursuant to a Creative Commons license permitting commercial use. All rights not granted by the work's license are retained by the author or authors.
Download or read book Probabilistic Motion Planning for Automated Vehicles written by Naumann, Maximilian and published by KIT Scientific Publishing. This book was released on 2021-02-25 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: In motion planning for automated vehicles, a thorough uncertainty consideration is crucial to facilitate safe and convenient driving behavior. This work presents three motion planning approaches which are targeted towards the predominant uncertainties in different scenarios, along with an extended safety verification framework. The approaches consider uncertainties from imperfect perception, occlusions and limited sensor range, and also those in the behavior of other traffic participants.
Download or read book Motion Planning for Autonomous Vehicles in Partially Observable Environments written by Taş, Ömer Şahin and published by KIT Scientific Publishing. This book was released on 2023-10-23 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work develops a motion planner that compensates the deficiencies from perception modules by exploiting the reaction capabilities of a vehicle. The work analyzes present uncertainties and defines driving objectives together with constraints that ensure safety. The resulting problem is solved in real-time, in two distinct ways: first, with nonlinear optimization, and secondly, by framing it as a partially observable Markov decision process and approximating the solution with sampling.
Download or read book Belief State Planning for Autonomous Driving Planning with Interaction Uncertain Prediction and Uncertain Perception written by Hubmann, Constantin and published by KIT Scientific Publishing. This book was released on 2021-09-13 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents a behavior planning algorithm for automated driving in urban environments with an uncertain and dynamic nature. The algorithm allows to consider the prediction uncertainty (e.g. different intentions), perception uncertainty (e.g. occlusions) as well as the uncertain interactive behavior of the other agents explicitly. Simulating the most likely future scenarios allows to find an optimal policy online that enables non-conservative planning under uncertainty.
Download or read book Novel Aggregated Solutions for Robust Visual Tracking in Traf c Scenarios written by Tian, Wei and published by KIT Scientific Publishing. This book was released on 2019-05-21 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work proposes novel approaches for object tracking in challenging scenarios like severe occlusion, deteriorated vision and long range multi-object reidenti?cation. All these solutions are only based on image sequence captured by a monocular camera and do not require additional sensors. Experiments on standard benchmarks demonstrate an improved state-of-the-art performance of these approaches. Since all the presented approaches are smartly designed, they can run at a real-time speed.
Download or read book Autonomous Road Vehicles Localization Using Satellites Lane Markings and Vision written by Zui Tao and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Estimating the pose (position and attitude) in real-time is a key function for road autonomous vehicles. This thesis aims at studying vehicle localization performance using low cost automotive sensors. Three kinds of sensors are considered : dead reckoning (DR) sensors that already exist in modern vehicles, mono-frequency GNSS (Global navigation satellite system) receivers with patch antennas and a frontlooking lane detection camera. Highly accurate maps enhanced with road features are also key components for autonomous vehicle navigation. In this work, a lane marking map with decimeter-level accuracy is considered. The localization problem is studied in a local East-North-Up (ENU) working frame. Indeed, the localization outputs are used in real-time as inputs to a path planner and a motion generator to make a valet vehicle able to drive autonomously at low speed with nobody on-board the car. The use of a lane detection camera makes possible to exploit lane marking information stored in the georeferenced map. A lane marking detection module detects the vehicle's host lane and provides the lateral distance between the detected lane marking and the vehicle. The camera is also able to identify the type of the detected lane markings (e.g., solid or dashed). Since the camera gives relative measurements, the important step is to link the measures with the vehicle's state. A refined camera observation model is proposed. It expresses the camera metric measurements as a function of the vehicle's state vector and the parameters of the detected lane markings. However, the use of a camera alone has some limitations. For example, lane markings can be missing in some parts of the navigation area and the camera sometimes fails to detect the lane markings in particular at cross-roads. GNSS, which is mandatory for cold start initialization, can be used also continuously in the multi-sensor localization system as done often when GNSS compensates for the DR drift. GNSS positioning errors can't be modeled as white noises in particular with low cost mono-frequency receivers working in a standalone way, due to the unknown delays when the satellites signals cross the atmosphere and real-time satellites orbits errors. GNSS can also be affected by strong biases which are mainly due to multipath effect. This thesis studies GNSS biases shaping models that are used in the localization solver by augmenting the state vector. An abrupt bias due to multipath is seen as an outlier that has to be rejected by the filter. Depending on the information flows between the GNSS receiver and the other components of the localization system, data-fusion architectures are commonly referred to as loosely coupled (GNSS fixes and velocities) and tightly coupled (raw pseudoranges and Dopplers for the satellites in view). This thesis investigates both approaches. In particular, a road-invariant approach is proposed to handle a refined modeling of the GNSS error in the loosely coupled approach since the camera can only improve the localization performance in the lateral direction of the road. Finally, this research discusses some map-matching issues for instance when the uncertainty domain of the vehicle state becomes large if the camera is blind. It is challenging in this case to distinguish between different lanes when the camera retrieves lane marking measurements.As many outdoor experiments have been carried out with equipped vehicles, every problem addressed in this thesis is evaluated with real data. The different studied approaches that perform the data fusion of DR, GNSS, camera and lane marking map are compared and several conclusions are drawn on the fusion architecture choice.
Download or read book Precise Localization in 3D Prior Map for Autonomous Driving written by Mohamed Lamine Tazir and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concept of self-driving vehicles is becoming a happening reality and will soon share our roads with other vehicles -autonomous or not-. For a self-driving car to move around in its environment in a securely, it needs to sense to its immediate environment and most importantly localize itself to be able to plan a safe trajectory to follow. Therefore, to perform tasks suchas trajectory planning and navigation, a precise localization is of upmost importance. This would further allow the vehicle toconstantly plan and predict an optimal path in order to weave through cluttered spaces by avoiding collisions with other agentssharing the same space as the latter. For years, the Global Positioning System (GPS) has been a widespread complementary solution for navigation. The latter allows only a limited precision (range of several meters). Although the Differential GPSand the Real Time Kinematic (RTK) systems have reached considerable accuracy, these systems remain sensitive to signal masking and multiple reflections, offering poor reliability in dense urban areas. All these deficiencies make these systems simply unsuitable to handle hard real time constraints such as collision avoidance. A prevailing alternative that has attracted interest recently, is to use upload a prior map in the system so that the agent can have a reliable support to lean on. Indeed,maps facilitate the navigation process and add an extra layer of security and other dimensions of semantic understanding. The vehicle uses its onboard sensors to compare what it perceives at a given instant to what is stored in the backend memory ofthe system. In this way, the autonomous vehicle can actually anticipate and predict its actions accordingly.The purpose of this thesis is to develop tools allowing an accurate localization task in order to deal with some complex navigation tasks outlined above. Localization is mainly performed by matching a 3D prior map with incoming point cloudstructures as the vehicle moves. Three main objectives are set out leading with two distinct phases deployed (the map building and the localization). The first allows the construction of the map, with centimeter accuracy using static or dynamic laser surveying technique. Explicit details about the experimental setup and data acquisition campaigns thoroughly carried outduring the course of this work are given. The idea is to construct efficient maps liable to be updated in the long run so thatthe environment representation contained in the 3D models are compact and robust. Moreover, map-building invariant on any dedicated infrastructure is of the paramount importance of this work in order to rhyme with the concept of flexible mapping and localization. In order to build maps incrementally, we rely on a self-implementation of state of the art iterative closest point (ICP) algorithm, which is then upgraded with new variants and compared to other implemented versions available inthe literature. However, obtaining accurate maps requires very dense point clouds, which make them inefficient for real-time use. Inthis context, the second objective deals with points cloud reduction. The proposed approach is based on the use of both colorinformation and the geometry of the scene. It aims to find sets of 3D points with the same color in a very small region and replacing each set with one point. As a result, the volume of the map will be significantly reduced, while the proprieties of this map such as the shape and color of scanned objects remain preserved.The third objective resort to efficient, precise and reliable localization once the maps are built and treated. For this purpose, the online data should be accurate, fast with low computational effort whilst maintaining a coherent model of the explored space. To this end, the Velodyne HDL-32 comes into play. (...).
Download or read book Special Issue of the Manufacturing Engineering Society 2019 SIMES 2019 written by Eva M. Rubio and published by MDPI. This book was released on 2020-07-03 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book derives from the Special Issue of the Manufacturing Engineering Society 2019 (SIMES-2019) that has been launched as a joint issue of the journals Materials and Applied Sciences. The 29 contributions published in this Special Issue of Materials present cutting-edge advances in the field of manufacturing engineering focusing on additive manufacturing and 3D printing; advances and innovations in manufacturing processes; sustainable and green manufacturing; manufacturing of new materials; metrology and quality in manufacturing; industry 4.0; design, modeling, and simulation in manufacturing engineering; and manufacturing engineering and society. Among them, the topic "Additive Manufacturing and 3D Printing" has attracted a large number of contributions in this journal due to its widespread popularity and potential.
Download or read book Adaptive Kalman Filtering Methods for Low cost GPS INS Localization for Autonomous Vehicles written by Adam Werries and published by . This book was released on 2016 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: For autonomous vehicles, navigation systems must be accurate enough to provide lane-level localization. High-accuracy sensors are available but not cost-effective for production use. Although prone to significant error in poor circumstances, even low-cost GPS systems are able to correct Inertial Navigation Systems to limit the effects of dead reckoning error over short periods between sufficiently accurate GPS updates. Kalman filters are a standard approach for GPS/INS integration, but require careful tuning in order to achieve quality results. This creates a motivation for a Kalman filter which is able to adapt to different sensors and circumstances on its own. Typically for adaptive filters, either the process (Q) or measurement (R) noise covariance matrix of Kalman filters is adapted, and the other is fixed to values estimated a priori. We show that intelligently adapting both matrices in an intelligent manner can provide a more accurate navigation solution.
Download or read book Springer Handbook of Automation written by Shimon Y. Nof and published by Springer Nature. This book was released on 2023-06-16 with total page 1533 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook incorporates new developments in automation. It also presents a widespread and well-structured conglomeration of new emerging application areas, such as medical systems and health, transportation, security and maintenance, service, construction and retail as well as production or logistics. The handbook is not only an ideal resource for automation experts but also for people new to this expanding field.
Download or read book Introduction to GPS written by Ahmed El-Rabbany and published by Artech House. This book was released on 2002 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: If you're looking for an up-to-date, easy-to-understand treatment of the GPS (Global Positioning System), this one-of-a-kind resource offers you the knowledge you need for your work, without bogging you down with advanced mathematics. It addresses all aspects of the GPS, emphasizes GPS applications, examines the GPS signal structure, and covers the key types of measurement being utilized in the field today.
Download or read book Localization Algorithms and Strategies for Wireless Sensor Networks Monitoring and Surveillance Techniques for Target Tracking written by Mao, Guoqiang and published by IGI Global. This book was released on 2009-05-31 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless localization techniques are an area that has attracted interest from both industry and academia, with self-localization capability providing a highly desirable characteristic of wireless sensor networks. Localization Algorithms and Strategies for Wireless Sensor Networks encompasses the significant and fast growing area of wireless localization techniques. This book provides comprehensive and up-to-date coverage of topics and fundamental theories underpinning measurement techniques and localization algorithms. A useful compilation for academicians, researchers, and practitioners, this Premier Reference Source contains relevant references and the latest studies emerging out of the wireless sensor network field.
Download or read book Probabilistic Robotics written by Sebastian Thrun and published by MIT Press. This book was released on 2005-08-19 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the techniques and algorithms of the newest field in robotics. Probabilistic robotics is a new and growing area in robotics, concerned with perception and control in the face of uncertainty. Building on the field of mathematical statistics, probabilistic robotics endows robots with a new level of robustness in real-world situations. This book introduces the reader to a wealth of techniques and algorithms in the field. All algorithms are based on a single overarching mathematical foundation. Each chapter provides example implementations in pseudo code, detailed mathematical derivations, discussions from a practitioner's perspective, and extensive lists of exercises and class projects. The book's Web site, www.probabilistic-robotics.org, has additional material. The book is relevant for anyone involved in robotic software development and scientific research. It will also be of interest to applied statisticians and engineers dealing with real-world sensor data.
Download or read book Artificial Intelligence and Intelligent Transportation Systems written by and published by . This book was released on 2001 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Global Positioning System written by Bradford W. Parkinson and published by AIAA. This book was released on 1996 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Understanding Augmented Reality written by Alan B. Craig and published by Newnes. This book was released on 2013-04-26 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding Augmented Reality addresses the elements that are required to create augmented reality experiences. The technology that supports augmented reality will come and go, evolve and change. The underlying principles for creating exciting, useful augmented reality experiences are timeless. Augmented reality designed from a purely technological perspective will lead to an AR experience that is novel and fun for one-time consumption - but is no more than a toy. Imagine a filmmaking book that discussed cameras and special effects software, but ignored cinematography and storytelling! In order to create compelling augmented reality experiences that stand the test of time and cause the participant in the AR experience to focus on the content of the experience - rather than the technology - one must consider how to maximally exploit the affordances of the medium. Understanding Augmented Reality addresses core conceptual issues regarding the medium of augmented reality as well as the technology required to support compelling augmented reality. By addressing AR as a medium at the conceptual level in addition to the technological level, the reader will learn to conceive of AR applications that are not limited by today’s technology. At the same time, ample examples are provided that show what is possible with current technology. Explore the different techniques, technologies and approaches used in developing AR applications Learn from the author's deep experience in virtual reality and augmented reality applications to succeed right off the bat, and avoid many of the traps that catch new developers and users of augmented reality experiences Some AR examples can be experienced from within the book using downloadable software