Download or read book Laboratory Testing of Soils Rocks and Aggregates written by Nagaratnam Sivakugan and published by J. Ross Publishing. This book was released on 2011 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains virtually all current laboratory tests for soils, rocks and aggregates in one volume with references to international standards: ASTM, ISRM, BS, and AS.
Download or read book Manual of Geotechnical Laboratory Soil Testing written by Bashir Ahmed Mir and published by CRC Press. This book was released on 2021-10-03 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manual of Geotechnical Laboratory Soil Testing covers the physical, index, and engineering properties of soils, including compaction characteristics (optimum moisture content), permeability (coefficient of hydraulic conductivity), compressibility characteristics, and shear strength (cohesion intercept and angle of internal friction). Further, this manual covers data collection, analysis, computations, additional considerations, sources of error, precautionary measures, and the presentation results along with well-defined illustrations for each of the listed tests. Each test is based on relevant standards with pertinent references, broadly aimed at geotechnical design applications. FEATURES Provides fundamental coverage of elementary-level laboratory characterization of soils Describes objectives, basic concepts, general understanding, and appreciation of the geotechnical principles for determination of physical, index, and engineering properties of soil materials Presents the step-by-step procedures for various tests based on relevant standards Interprets soil analytical data and illustrates empirical relationship between various soil properties Includes observation data sheet and analysis, results and discussions, and applications of test results This manual is aimed at undergraduates, senior undergraduates, and researchers in geotechnical and civil engineering. Prof. (Dr.) Bashir Ahmed Mir is among the senior faculty of the Civil Engineering Department of the National Institute of Technology Srinagar and has more than two decades of teaching experience. Prof. Mir has published more than 100 research papers in international journals and conferences; chaired technical sessions in international conferences in India and throughout the world; and provided consultancy services to more than 150 projects of national importance to various government and private agencies.
Download or read book Dynamic Geotechnical Testing written by M. L. Silver and published by ASTM International. This book was released on 1978 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aggregates written by Mick R. Smith and published by Geological Society of America. This book was released on 2001 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Soil Testing for Engineers written by T. William Lambe and published by . This book was released on 1951 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Methods of Soil Analysis Part 4 written by Jacob H. Dane and published by John Wiley & Sons. This book was released on 2020-05-27 with total page 1744 pages. Available in PDF, EPUB and Kindle. Book excerpt: The best single reference for both the theory and practice of soil physical measurements, Methods, Part 4 adopts a more hierarchical approach to allow readers to easily find their specific topic or measurement of interest. As such it is divided into eight main chapters on soil sampling and statistics, the solid, solution, and gas phases, soil heat, solute transport, multi-fluid flow, and erosion. More than 100 world experts contribute detailed sections.
Download or read book Soil Quality Test Kit Guide written by and published by . This book was released on 1998 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles of Testing Soils Rocks and Concrete written by T.S. Nagaraj and published by Elsevier. This book was released on 1993-01-13 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soils, rocks and concrete are the principal materials a civil engineer encounters in practice. This book deals with the material analogies, their implications in property characterization, giving attention to similar as well as dissimilar methods in respect of each of these three materials. It provides an integrated, systematic approach for realistic assessment of engineering properties of soils, rocks and concrete. Geotechnical engineers, civil engineers and materials scientists will be interested in this volume.
Download or read book Engineering Rock Mass Classification written by R K Goel and published by Elsevier. This book was released on 2011-08-09 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock mass classification methods are commonly used at the preliminary design stages of a construction project when there is very little information. It forms the bases for design and estimation of the required amount and type of rock support and groundwater control measures. Encompassing nearly all aspects of rock mass classifications in detail, Civil Engineering Rock Mass Classification: Tunnelling, Foundations and Landsides provides construction engineers and managers with extensive practical knowledge which is time-tested in the projects in Himalaya and other parts of the world in complex geological conditions. Rock mass classification is an essential element of feasibility studies for any near surface construction project prior to any excavation or disturbances made to earth. Written by an author team with over 50 years of experience in some of the most difficult mining regions of the world, Civil Engineering Rock Mass Classification: Tunnelling, Foundations and Landsides provides construction engineers, construction managers and mining engineers with the tools and methods to gather geotechnical data, either from rock cuts, drifts or core, and process the information for subsequent analysis. The goal is to use effective mapping techniques to obtain data can be used as input for any of the established rock classification systems. The book covers all of the commonly used classification methods including: Barton's Q and Q' systems, Bieniawski's RMR, Laubscher's MRMR and Hoek's and GSI systems. With this book in hand, engineers will be able to gather geotechnical data, either from rock cuts, drifts or core, and process the information for subsequent analysis. Rich with international case studies and worked out equations, the focus of the book is on the practical gathering information for purposes of analysis and design. - Identify the most significant parameters influencing the behaviour of a rock mass - Divide a particular rock mass formulation into groups of similar behaviour, rock mass classes of varying quality - Provide a basis of understanding the characteristics of each rock mass class - Relate the experience of rock conditions at one site to the conditions and experience encountered at others - Derive quantitative data and guidelines for engineering design - Provide common basis for communication between engineers and geologists
Download or read book Handbook of Geotechnical Investigation and Design Tables written by Burt G. Look and published by CRC Press. This book was released on 2007-04-26 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook of properties for soils and rock contains, in a concise tabular format, the key issues relevant to geotechnical investigations, assessments and designs in common practice. In addition, there are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation, the classification of the soil and rock properties and some of the more used testing is then covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses.
Download or read book The Aggregates Handbook Second Edition written by National Stone, Sand & Gravel Association and published by . This book was released on 2013-03-20 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Diagnosis and Improvement of Saline and Alkali Soils written by L. E. Allison and published by . This book was released on 1947 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Constitutive Modeling of Soils and Rocks written by Pierre-Yves Hicher and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title provides a comprehensive overview of elastoplasticity relating to soil and rocks. Following a general outline of the models of behavior and their internal structure, each chapter develops a different area of this subject relating to the author's particular expertise. The first half of the book concentrates on the elastoplasticity of soft soils and rocks, while the second half examines that of hard soils and rocks.
Download or read book Correlations of Soil and Rock Properties in Geotechnical Engineering written by Jay Ameratunga and published by Springer. This book was released on 2015-12-11 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a one-stop reference to the empirical correlations used extensively in geotechnical engineering. Empirical correlations play a key role in geotechnical engineering designs and analysis. Laboratory and in situ testing of soils can add significant cost to a civil engineering project. By using appropriate empirical correlations, it is possible to derive many design parameters, thus limiting our reliance on these soil tests. The authors have decades of experience in geotechnical engineering, as professional engineers or researchers. The objective of this book is to present a critical evaluation of a wide range of empirical correlations reported in the literature, along with typical values of soil parameters, in the light of their experience and knowledge. This book will be a one-stop-shop for the practising professionals, geotechnical researchers and academics looking for specific correlations for estimating certain geotechnical parameters. The empirical correlations in the forms of equations and charts and typical values are collated from extensive literature review, and from the authors' database.
Download or read book Laboratory Soils Testing written by U.S. Army Corps of Engineers and published by Lulu.com. This book was released on 2007-12-28 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual presents recommended testing procedures for making determinations of the soil properties to be used in the design of civil works projects. It is not intended to be a text book on soils testing or to supplant the judgment of design engineers in specifying procedures to satisfy the requirements of a particular project, although it has been used in basic soil mechanics courses. Test procedures included are Water Content, Unit Weights, Void Ratio, Porosity and Degree Of Saturation, Liquid and Plastic Limits, Shrinkage Limit Test, Grain-size Analysis, Compaction Tests, Permeability Tests, Consolidation Test, Swell and Swell Pressure Tests. Drained Direct Shear Test, Triaxial Compression Tests, Determination of Critical Void Ratio, Unconfined Compression Test, Modified Providence Vibrated Density Test, and Pinhole Erosion Test for Identification of Dispersive Clays.
Download or read book Geotechnical Engineering of Dams written by Robin Fell and published by CRC Press. This book was released on 2014-11-21 with total page 1374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive text on the geotechnical and geological aspects of the investigations for and the design and construction of new dams and the review and assessment of existing dams. The book provides dam engineers and geologists with a practical approach, and gives university students an insight into the subject of dam engineering. All phases of investigation, design and construction are covered, through to the preliminary and detailed design phases and ultimately the construction phase. This revised and expanded 2nd edition includes a lengthy new chapter on the assessment of the likelihood of failure of dams by internal erosion and piping.
Download or read book Site Investigation written by CR Clayton and published by Wiley-Blackwell. This book was released on 1995-09-06 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Site investigation is the crucial first step in design and construction, when the cost and practicality of a project are evaluated. It is also a necessary part of the investigation of building failures. This major reference work describes the organization of site investigation, the plant, sampling equipment and interpretation of results. The second edition includes new material on specification and procurement, desk studies on geophysics, sample disturbance and sampling methods, in-situ testing and laboratory testing.
