Download or read book Laboratory Evaluation of Coefficient of Radial Consolidation Based on Pore Water Pressure Dissipation and Settlement written by Buddhima Indraratna and published by . This book was released on 2012 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modified and standard Rowe consolidation cells were employed to investigate the behaviour of soft clays during vacuum assisted radial consolidation. Degree of consolidation (DOC) and the back calculated value of coefficient of radial consolidation (ch) based on measured settlement and excess pore-water-pressure (uw) dissipation curves were compared. The DOC and (ch) based on pore water pressures are shown to be less than those based on settlements. The vacuum pressure-total surcharge ratio (VSR) is found to be an important parameter controlling the rate of the consolidation. Moreover, the coefficient of radial consolidation (ch) based on conventional oedometer testing could not accurately predict the consolidation behaviour of soft soils under varying VSR. Finally, a semi-empirical model incorporating the relationship between VSR and a modified coefficient of radial consolidation is introduced.
Download or read book Geotechnical Engineering for Transportation Infrastructure written by F.B.J. Barends and published by Routledge. This book was released on 2017-11-22 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides an overview of the proceedings of the XIIth ECSME Conference 1999. It covers a wide variety of topics, from summaries of workshops and sessions, to the emergence of information technology and information retrieval and communication.
Download or read book Ground Improvement written by Professor Jian Chu and published by Elsevier. This book was released on 2005-11-07 with total page 1137 pages. Available in PDF, EPUB and Kindle. Book excerpt: - The first book of its kind, providing over thirty real-life case studies of ground improvement projects selected by the worlds top experts in ground improvement from around the globe. - Volume 3 of the highly regarded Elsevier Geo-engineering book series coordinated by the Series Editor: Professor John A Hudson FREng. - An extremely reader friendly chapter format. - Discusses wider economical and environmental issues facing scientists in the ground improvement.Ground improvement has been both a science and art, with significant developments observed through ancient history. From the use of straw as blended infill with soils for additional strength during the ancient Roman civilizations, and the use of elephants for compaction of earth dams during the early Asian civilizations, the concepts of reinforced earth with geosynthetics, use of electrokinetics and thermal modifications of soils have come a long way. The use of large and stiff stone columns and subsequent sand drains in the past has now been replaced by quicker to install and more effective prefabricated vertical drains, which have also eliminated the need for more expensive soil improvement methods.The early selection and application of the most appropriate ground improvement techniques can improve considerably not only the design and performance of foundations and earth structures, including embankments, cut slopes, roads, railways and tailings dams, but also result in their cost-effectiveness. Ground improvement works have become increasingly challenging when more and more problematic soils and marginal land have to be utilized for infrastructure development.This edited compilation contains a collection of Chapters from invited experts in various areas of ground improvement, who have illustrated the basic concepts and the applications of different ground improvement techniques using real projects that they have been involved in. The case histories from many countries ranging from Asia, America, Australia and Europe are addressed.
Download or read book Advances in Laboratory Testing and Modelling of Soils and Shales ATMSS written by Alessio Ferrari and published by Springer. This book was released on 2017-01-16 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this spirit, the ATMSS International Workshop “Advances in Laboratory Testing & Modelling of Soils and Shales” (Villars-sur-Ollon, Switzerland; 18-20 January 2017) has been organized to promote the exchange of ideas, experience and state of the art among major experts active in the field of experimental testing and modelling of soils and shales. The Workshop has been organized under the auspices of the Technical Committees TC-101 “Laboratory Testing”, TC-106 “Unsaturated Soils” and TC-308 “Energy Geotechnics” of the International Society of Soil Mechanics and Geotechnical Engineering. This volume contains the invited keynote and feature lectures, as well as the papers that have been presented at the Workshop. The topics of the lectures and papers cover a wide range of theoretical and experimental research, including unsaturated behaviour of soils and shales, multiphysical testing of geomaterials, hydro–mechanical behaviour of shales and stiff clays, the geomechanical behaviour of the Opalinus Clay shale, advanced laboratory testing for site characterization and in–situ applications, and soil – structure interactions.
Download or read book Fundamentals of Soil Mechanics written by Donald Wood Taylor and published by . This book was released on 2013-07 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Correlations of Soil and Rock Properties in Geotechnical Engineering written by Jay Ameratunga and published by Springer. This book was released on 2015-12-11 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a one-stop reference to the empirical correlations used extensively in geotechnical engineering. Empirical correlations play a key role in geotechnical engineering designs and analysis. Laboratory and in situ testing of soils can add significant cost to a civil engineering project. By using appropriate empirical correlations, it is possible to derive many design parameters, thus limiting our reliance on these soil tests. The authors have decades of experience in geotechnical engineering, as professional engineers or researchers. The objective of this book is to present a critical evaluation of a wide range of empirical correlations reported in the literature, along with typical values of soil parameters, in the light of their experience and knowledge. This book will be a one-stop-shop for the practising professionals, geotechnical researchers and academics looking for specific correlations for estimating certain geotechnical parameters. The empirical correlations in the forms of equations and charts and typical values are collated from extensive literature review, and from the authors' database.
Download or read book Basics of Foundation Design written by Bengt Fellenius and published by Lulu.com. This book was released on 2017-03-17 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: The "Red Book" presents a background to conventional foundation analysis and design. The text is not intended to replace the much more comprehensive 'standard' textbooks, but rather to support and augment these in a few important areas, supplying methods applicable to practical cases handled daily by practising engineers and providing the basic soil mechanics background to those methods. It concentrates on the static design for stationary foundation conditions. Although the topic is far from exhaustively treated, it does intend to present most of the basic material needed for a practising engineer involved in routine geotechnical design, as well as provide the tools for an engineering student to approach and solve common geotechnical design problems.
Download or read book Manual of Soil Laboratory Testing Soil Classification and Compaction Testing written by K. H. Head and published by John Wiley & Sons. This book was released on 1980-07-16 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Factors Controlling Pore Pressure Generation During K0 Consolidation of Laboratory Tests written by Erin Alden Force and published by . This book was released on 1998 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1985 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Geotechnical Investigation and Design Tables written by Burt G. Look and published by CRC Press. This book was released on 2007-04-26 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook of properties for soils and rock contains, in a concise tabular format, the key issues relevant to geotechnical investigations, assessments and designs in common practice. In addition, there are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation, the classification of the soil and rock properties and some of the more used testing is then covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses.
Download or read book HRIS Abstracts written by and published by . This book was released on 1988 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evaluation of Soil and Rock Properties written by P. J. Sabatini and published by . This book was released on 2004-10-01 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document presents state-of-the-practice information on the evaluation of soil and rock properties for geotechnical design applications. This document addresses the entire range of materials potentially encountered in highway engineering practice, from soft clay to intact rock and variations of materials that fall between these two extremes. Information is presented on parameters measured, evaluation of data quality, and interpretation of properties for conventional soil and rock laboratory testing, as well as in situ devices such as field vane testing, cone penetration testing, dilatometer, pressuremeter, and borehole jack. This document provides the design engineer with information that can be used to develop a rationale for accepting or rejecting data and for resolving inconsistencies between data provided by different laboratories and field tests. This document also includes information on: (1) the use of Geographical Information Systems (GIS) and Personal Data Assistance devices for the collection and interpretation of subsurface information; (2) quantitative measures for evaluating disturbance of laboratory soil samples; and (3) the use of measurements from geophysical testing techniques to obtain information on the modulus of soil. Also included are chapters on evaluating properties of special soil materials (e.g., loess, cemented sands, peats and organic soils, etc.) and the use of statistical information in evaluating anomalous data and obtaining design values for soil and rock properties. An appendix of three detailed soil and rock property selection examples is provided which illustrate the application of the methods described in the document.
Download or read book Beyond 2000 in Computational Geotechnics written by Ronald B.J. Brinkgreve and published by Routledge. This book was released on 2019-01-22 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains papers presented during the first international PLAXIS symposium. Topics covered include: general geo-technical aspects; tunnels and deep excavations, and education and research. This pack is meant for the user of the PLAXIS program, as well as engineers and researchers.
Download or read book Soil Mechanics written by David Muir Wood and published by Cambridge University Press. This book was released on 2009-09-28 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book teaches the principles of soil mechanics to undergraduates, along with other properties of engineering materials, to which the students are exposed simultaneously. Using the critical state method of soil mechanics to study the mechanical behavior of soils requires the student to consider density alongside effective stresses, permitting the unification of deformation and strength characteristics. This unification aids the understanding of soil mechanics. This book explores a one-dimensional theme for the presentation of many of the key concepts of soil mechanics - density, stress, stiffness, strength, and fluid flow - and includes a chapter on the analysis of one-dimensional consolidation, which fits nicely with the theme of the book. It also presents some theoretical analyses of soil-structure interaction, which can be analyzed using essentially one-dimensional governing equations. Examples are given at the end of most chapters, and suggestions for laboratory exercises or demonstrations are given.
Download or read book Principles and Practice of Ground Improvement written by Jie Han and published by John Wiley & Sons. This book was released on 2015-06-22 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gain a stronger foundation with optimal ground improvement Before you break ground on a new structure, you need to analyze the structure of the ground. Expert analysis and optimization of the geo-materials on your site can mean the difference between a lasting structure and a school in a sinkhole. Sometimes problematic geology is expected because of the location, but other times it's only unearthed once construction has begun. You need to be able to quickly adapt your project plan to include an improvement to unfavorable ground before the project can safely continue. Principles and Practice of Ground Improvement is the only comprehensive, up-to-date compendium of solutions to this critical aspect of civil engineering. Dr. Jie Han, registered Professional Engineer and preeminent voice in geotechnical engineering, is the ultimate guide to the methods and best practices of ground improvement. Han walks you through various ground improvement solutions and provides theoretical and practical advice for determining which technique fits each situation. Follow examples to find solutions to complex problems Complete homework problems to tackle issues that present themselves in the field Study design procedures for each technique to simplify field implementation Brush up on modern ground improvement technologies to keep abreast of all available options Principles and Practice of Ground Improvement can be used as a textbook, and includes Powerpoint slides for instructors. It's also a handy field reference for contractors and installers who actually implement plans. There are many ground improvement solutions out there, but there is no single right answer to every situation. Principles and Practice of Ground Improvement will give you the information you need to analyze the problem, then design and implement the best possible solution.
Download or read book Frontiers in Offshore Geotechnics III written by Vaughan Meyer and published by CRC Press. This book was released on 2015-05-15 with total page 1422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frontiers in Offshore Geotechnics III comprises the contributions presented at the Third International Symposium on Frontiers in Offshore Geotechnics (ISFOG, Oslo, Norway, 10-12 June 2015), organised by the Norwegian Geotechnical Institute (NGI). The papers address current and emerging geotechnical engineering challenges facing those working in off
