Download or read book Ku band High Efficiency GaAs MMIC Power Amplifiers written by and published by . This book was released on 1988 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Efficiency Class F MMIC Power Amplifiers at Ku Band written by and published by . This book was released on 2005 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two high efficiency Ku-band pHEMT power amplifier MMICs are presented in this paper. A single, stage, high efficiency amplifier provides a peak power added efficiency of 57.6% with 10.5 dB associated gain and 26.5 dBm output power into a 50 Ohms load at 14 GHz. Additionally, a dual stage, high gain amplifier provides a peak power added efficiency of 50.4% with 19.7 dB associated gain and 27.5 dBm output power into a 50 Ohms load at 14.3 GHz. State-of-the-art efficiency performance at these frequencies is achieved through Class-F transistor operation. Process selection, circuit design, and measured results are described.
Download or read book A 1 8 3 GHz band High Efficiency GaAs PHEMT Power Amplifier MMIC written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: This paper describes an S-band wideband high efficiency power amplifier based on the Nanjing Electron Device Institute's GaAs pHEMT monolithic microwave integrated circuit (MMIC) technology. To realize high efficiency, the two stage power amplifier is designed with a driver ratio of 1 : 8. The low-pass filter/high-pass filter combined matching circuit is applied to the amplifier to reduce the chip size, as well as to realize the optimum impedances over a wide bandwidth for high efficiency at each stage. Biased at class AB under a drain supply voltage of 5 V, the amplifier delivers 33–34 dBm saturated output power across the frequency range of 1.8 to 3 GHz with associated power-added efficiency of 35%–45% and very flat power gain of 25–26 dB in CW mode. The size of this MMIC is very compact with 2.7 × 2.75 mm 2 .
Download or read book RFIC and MMIC Design and Technology written by I.D. Robertson and published by IET. This book was released on 2001-11-30 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an in-depth account of GaAs, InP and SiGe, technologies and describes all the key techniques for the design of amplifiers, ranging from filters and data converters to image oscillators, mixers, switches, variable attenuators, phase shifters, integrated antennas and complete monolithic transceivers.
Download or read book Fundamentals of RF and Microwave Transistor Amplifiers written by Inder Bahl and published by John Wiley & Sons. This book was released on 2009-06-17 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive and Up-to-Date Treatment of RF and Microwave Transistor Amplifiers This book provides state-of-the-art coverage of RF and microwave transistor amplifiers, including low-noise, narrowband, broadband, linear, high-power, high-efficiency, and high-voltage. Topics covered include modeling, analysis, design, packaging, and thermal and fabrication considerations. Through a unique integration of theory and practice, readers will learn to solve amplifier-related design problems ranging from matching networks to biasing and stability. More than 240 problems are included to help readers test their basic amplifier and circuit design skills-and more than half of the problems feature fully worked-out solutions. With an emphasis on theory, design, and everyday applications, this book is geared toward students, teachers, scientists, and practicing engineers who are interested in broadening their knowledge of RF and microwave transistor amplifier circuit design.
Download or read book Power Amplifiers for the S C X and Ku bands written by Mladen Božanić and published by Springer. This book was released on 2015-12-29 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed review of power amplifiers, including classes and topologies rarely covered in books, and supplies sufficient information to allow the reader to design an entire amplifier system, and not just the power amplification stage. A central aim is to furnish readers with ideas on how to simplify the design process for a preferred power amplifier stage by introducing software-based routines in a programming language of their choice. The book is in two parts, the first focusing on power amplifier theory and the second on EDA concepts. Readers will gain enough knowledge of RF and microwave transmission theory, principles of active and passive device design and manufacturing, and power amplifier design concepts to allow them to quickly create their own programs, which will help to accelerate the transceiver design process. All circuit designers facing the challenge of designing an RF or microwave power amplifier for frequencies from 2 to 18 GHz will find this book to be a valuable asset.
Download or read book Gallium Nitride Electronics written by Rüdiger Quay and published by Springer Science & Business Media. This book was released on 2008-04-05 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on nearly a decade of materials and electronics research at the leading research institution on the nitride topic in Europe. It is a comprehensive monograph and tutorial that will be of interest to graduate students of electrical engineering, communication engineering, and physics; to materials, device, and circuit engineers in research and industry; to all scientists with a general interest in advanced electronics.
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on with total page 1450 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Catalogue United States Public Documents written by and published by . This book was released on 1995 with total page 1036 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Efficiency RF and Microwave Solid State Power Amplifiers written by Paolo Colantonio and published by John Wiley & Sons. This book was released on 2009-07-08 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Do you want to know how to design high efficiency RF and microwave solid state power amplifiers? Read this book to learn the main concepts that are fundamental for optimum amplifier design. Practical design techniques are set out, stating the pros and cons for each method presented in this text. In addition to novel theoretical discussion and workable guidelines, you will find helpful running examples and case studies that demonstrate the key issues involved in power amplifier (PA) design flow. Highlights include: Clarification of topics which are often misunderstood and misused, such as bias classes and PA nomenclatures. The consideration of both hybrid and monolithic microwave integrated circuits (MMICs). Discussions of switch-mode and current-mode PA design approaches and an explanation of the differences. Coverage of the linearity issue in PA design at circuit level, with advice on low distortion power stages. Analysis of the hot topic of Doherty amplifier design, plus a description of advanced techniques based on multi-way and multi-stage architecture solutions. High Efficiency RF and Microwave Solid State Power Amplifiers is: an ideal tutorial for MSc and postgraduate students taking courses in microwave electronics and solid state circuit/device design; a useful reference text for practising electronic engineers and researchers in the field of PA design and microwave and RF engineering. With its unique unified vision of solid state amplifiers, you won’t find a more comprehensive publication on the topic.
Download or read book Current Trends in Heterojunction Bipolar Transistors written by M. F. Chang and published by World Scientific. This book was released on 1996 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in communication, digital signal processing and computational systems demand very high performance electronic circuits. Heterojunction Bipolar Transistors (HBTs) have the potential of providing a more efficient solution to many key system requirements through intrinsic device advantages. This book reviews the present status of GaAs, InP and silicon-based HBT technologies and their applications to digital, analog, microwave and mixed-signal circuits and systems. It represents the first major effort to cover the complete scope of the HBT technology development in the past decade, starting from the fundamental device physics, material growth, device reliability, scaling, processing, modeling to advanced HBT integrated circuit design for various system applications.
Download or read book Bandwidth and Efficiency Enhancement in Radio Frequency Power Amplifiers for Wireless Transmitters written by Karun Rawat and published by Springer Nature. This book was released on 2020-03-05 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on broadband power amplifier design for wireless communication. Nonlinear model embedding is described as a powerful tool for designing broadband continuous Class-J and continuous class F power amplifiers. The authors also discuss various techniques for extending bandwidth of load modulation based power amplifiers, such as Doherty power amplifier and Chireix outphasing amplifiers. The book also covers recent trends on digital as well as analog techniques to enhance bandwidth and linearity in wireless transmitters. Presents latest trends in designing broadband power amplifiers; Covers latest techniques for using nonlinear model embedding in designing power amplifiers based on waveform engineering; Describes the latest techniques for extending bandwidth of load modulation based power amplifiers such as Doherty power amplifier and Chireix outphasing amplifiers; Includes coverage of hybrid analog/digital predistortion as wideband solution for wireless transmitters; Discusses recent trends on on-chip power amplifier design with GaN /GaAs MMICs for high frequency applications.
Download or read book NASA Information Sciences and Human Factors Program Annual Report 1988 written by United States. National Aeronautics and Space Administration. Information Sciences and Human Factors Division and published by . This book was released on 1989 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Efficiency High Gain K and Ku band InP based HEMT MMIC Amplifiers for Array Applications written by Michael Case and published by . This book was released on 1994 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Index to IEEE Publications written by Institute of Electrical and Electronics Engineers and published by . This book was released on 1997 with total page 1462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues for 1973- cover the entire IEEE technical literature.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Lumped Elements for RF and Microwave Circuits Second Edition written by Inder J. Bahl and published by Artech House. This book was released on 2022-12-31 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fully updated and including entirely new chapters, this Second Edition provides in-depth coverage of the different types of RF and microwave circuit elements, including inductors, capacitors, resistors, transformers, via holes, airbridges, and crossovers. Featuring extensive formulas for lumped elements, design trade-offs, and an updated and current list of references, the book helps you understand the value and usefulness of lumped elements in the design of RF, microwave and millimeter wave components and circuits. You’ll find a balanced treatment between standalone lumped elements and their circuits using MICs, MMICs and RFICs technologies. You’ll also find detailed information on a broader range RFICs that was not available when the popular first edition was published. The book captures – in one consolidated volume -- the fundamentals, equations, modeling, examples, references and overall procedures to design, test and produce microwave components that are indispensable in industry and academia today. With its superb organization and expanded coverage of the subject, this is a must-have, go-to resource for practicing engineers and researchers in industry, government and university and microwave engineers working in the antenna area. Students will also find it a useful reference with its clear explanations, many examples and practical modeling guidelines.
