Download or read book A Process Centric View on Predictive Maintenance and Fleet Prognostics Development of a Process Reference Model and a Development Method for Fleet Prognostics to Guide Predictive Maintenance Projects written by Carolin Wagner and published by Logos Verlag Berlin GmbH. This book was released on 2022-08-12 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the age of digitalization and the fourth industrial revolution, predictive maintenance is becoming increasingly important as a proactive maintenance type. Despite the economic benefits that predictive maintenance generates for companies, its practical application is still in its early stages. This is often due to two prevailing challenges. First, there is a deficiency of knowledge about predictive maintenance and its concrete realization. Second, there is a lack of high quality and rich data of historical machine failures. To increase the representativeness of data, data from several similar machines (i.e. a fleet) should be considered. To foster the effective implementation of predictive maintenance, supportive guidance in the realization of a predictive maintenance project is needed. For this reason, this dissertation presents a process reference model and a development method for fleet prognostics. The process reference model describes a comprehensive and application-independent view of the complete predictive maintenance process. The model is supplemented by the fleet prognostic development method. To address the specific characteristics of the fleet, a systematic process is depicted which provides a means to assess the heterogeneity of the fleet from a data-driven perspective and simplifies the design of an algorithm considering fleet data. Finally, the applicability and value of the research results are demonstrated with three industrial cases

Download or read book Twin Control written by Mikel Armendia and published by Springer. This book was released on 2019-01-05 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book summarizes the results of the European research project “Twin-model based virtual manufacturing for machine tool-process simulation and control” (Twin-Control). The first part reviews the applications of ICTs in machine tools and manufacturing, from a scientific and industrial point of view, and introduces the Twin-Control approach, while Part 2 discusses the development of a digital twin of machine tools. The third part addresses the monitoring and data management infrastructure of machines and manufacturing processes and numerous applications of energy monitoring. Part 4 then highlights various features developed in the project by combining the developments covered in Parts 3 and 4 to control the manufacturing processes applying the so-called CPSs. Lastly, Part 5 presents a complete validation of Twin-Control features in two key industrial sectors: aerospace and automotive. The book offers a representative overview of the latest trends in the manufacturing industry, with a focus on machine tools.

Download or read book Data Driven Cognitive Manufacturing Applications in Predictive Maintenance and Zero Defect Manufacturing written by Dimitris Kiritsis and published by Frontiers Media SA. This book was released on 2021-03-10 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Data Analytics Applied to the Mining Industry written by Ali Soofastaei and published by CRC Press. This book was released on 2020-11-12 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Data Analytics Applied to the Mining Industry describes the key challenges facing the mining sector as it transforms into a digital industry able to fully exploit process automation, remote operation centers, autonomous equipment and the opportunities offered by the industrial internet of things. It provides guidelines on how data needs to be collected, stored and managed to enable the different advanced data analytics methods to be applied effectively in practice, through use of case studies, and worked examples. Aimed at graduate students, researchers, and professionals in the industry of mining engineering, this book: Explains how to implement advanced data analytics through case studies and examples in mining engineering Provides approaches and methods to improve data-driven decision making Explains a concise overview of the state of the art for Mining Executives and Managers Highlights and describes critical opportunity areas for mining optimization Brings experience and learning in digital transformation from adjacent sectors

Download or read book BUiD Doctoral Research Conference 2023 written by Khalid Al Marri and published by Springer Nature. This book was released on with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Predictive Analytics written by Vijay Kumar and published by CRC Press. This book was released on 2021-01-13 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Predictive analytics refers to making predictions about the future based on different parameters which are historical data, machine learning, and artificial intelligence. This book provides the most recent advances in the field along with case studies and real-world examples. It discusses predictive modeling and analytics in reliability engineering and introduces current achievements and applications of artificial intelligence, data mining, and other techniques in supply chain management. It covers applications to reliability engineering practice, presents numerous examples to illustrate the theoretical results, and considers and analyses case studies and real-word examples. The book is written for researchers and practitioners in the field of system reliability, quality, supply chain management, and logistics management. Students taking courses in these areas will also find this book of interest.

Download or read book Knowledge Based Intelligent Information and Engineering Systems 1 written by Mircea Gh. Negoita and published by Springer Science & Business Media. This book was released on 2004-09-17 with total page 1337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation The three-volume set LNAI 3213, LNAI 3214, and LNAI 3215 constitutes the refereed proceedings of the 8th International Conference on Knowledge-Based Intelligent Information and Engineering Systems, KES 2004, held in Wellington, New Zealand in September 2004. The over 450 papers presented were carefully reviewed and selected from numerous submissions. The papers present a wealth of original research results from the field of intelligent information processing in the broadest sense; among the areas covered are artificial intelligence, computational intelligence, cognitive technologies, soft computing, data mining, knowledge processing, various new paradigms in biologically inspired computing, and applications in various domains like bioinformatics, finance, signal processing etc.

Download or read book AI for Cars written by Josep Aulinas and published by CRC Press. This book was released on 2021-07-28 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial Intelligence (AI) is undoubtedly playing an increasingly significant role in automobile technology. In fact, cars inhabit one of just a few domains where you will find many AI innovations packed into a single product. AI for Cars provides a brief guided tour through many different AI landscapes including robotics, image and speech processing, recommender systems and onto deep learning, all within the automobile world. From pedestrian detection to driver monitoring to recommendation engines, the book discusses the background, research and progress thousands of talented engineers and researchers have achieved thus far, and their plans to deploy this life-saving technology all over the world.

Download or read book Smart Cities and Homes written by Petros Nicopolitidis and published by Morgan Kaufmann. This book was released on 2016-05-17 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Cities and Homes: Key Enabling Technologies explores the fundamental principles and concepts of the key enabling technologies for smart cities and homes, disseminating the latest research and development efforts in the field through the use of numerous case studies and examples. Smart cities use digital technologies embedded across all their functions to enhance the wellbeing of citizens. Cities that utilize these technologies report enhancements in power efficiency, water use, traffic congestion, environmental protection, pollution reduction, senior citizens care, public safety and security, literacy rates, and more. This book brings together the most important breakthroughs and advances in a coherent fashion, highlighting the interconnections between the works in different areas of computing, exploring both new and emerging computer networking systems and other computing technologies, such as wireless sensor networks, vehicle ad hoc networks, smart girds, cloud computing, and data analytics and their roles in creating environmentally friendly, secure, and prosperous cities and homes. Intended for researchers and practitioners, the book discusses the pervasive and cooperative computing technologies that will perform a central role for handling the challenges of urbanization and demographic change. - Includes case studies and contributions from prominent researchers and practitioners from around the globe - Explores the latest methodologies, theories, tools, applications, trends, challenges, and strategies needed to build smart cities and homes from the bottom up - Provides a pedagogy that includes PowerPoint slides, key terms, and a comprehensive bibliography

Download or read book Strategic Information Systems Concepts Methodologies Tools and Applications written by Hunter, M. Gordon and published by IGI Global. This book was released on 2009-08-31 with total page 2750 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This 4-volume set provides a compendium of comprehensive advanced research articles written by an international collaboration of experts involved with the strategic use of information systems"--Provided by publisher.

Download or read book Artificial Intelligence for Digitising Industry Applications written by Ovidiu Vermesan and published by CRC Press. This book was released on 2022-09-01 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides in-depth insights into use cases implementing artificial intelligence (AI) applications at the edge. It covers new ideas, concepts, research, and innovation to enable the development and deployment of AI, the industrial internet of things (IIoT), edge computing, and digital twin technologies in industrial environments. The work is based on the research results and activities of the AI4DI project, including an overview of industrial use cases, research, technological innovation, validation, and deployment. This book’s sections build on the research, development, and innovative ideas elaborated for applications in five industries: automotive, semiconductor, industrial machinery, food and beverage, and transportation. The articles included under each of these five industrial sectors discuss AI-based methods, techniques, models, algorithms, and supporting technologies, such as IIoT, edge computing, digital twins, collaborative robots, silicon-born AI circuit concepts, neuromorphic architectures, and augmented intelligence, that are anticipating the development of Industry 5.0. Automotive applications cover use cases addressing AI-based solutions for inbound logistics and assembly process optimisation, autonomous reconfigurable battery systems, virtual AI training platforms for robot learning, autonomous mobile robotic agents, and predictive maintenance for machines on the level of a digital twin. AI-based technologies and applications in the semiconductor manufacturing industry address use cases related to AI-based failure modes and effects analysis assistants, neural networks for predicting critical 3D dimensions in MEMS inertial sensors, machine vision systems developed in the wafer inspection production line, semiconductor wafer fault classifications, automatic inspection of scanning electron microscope cross-section images for technology verification, anomaly detection on wire bond process trace data, and optical inspection. The use cases presented for machinery and industrial equipment industry applications cover topics related to wood machinery, with the perception of the surrounding environment and intelligent robot applications. AI, IIoT, and robotics solutions are highlighted for the food and beverage industry, presenting use cases addressing novel AI-based environmental monitoring; autonomous environment-aware, quality control systems for Champagne production; and production process optimisation and predictive maintenance for soybeans manufacturing. For the transportation sector, the use cases presented cover the mobility-as-a-service development of AI-based fleet management for supporting multimodal transport. This book highlights the significant technological challenges that AI application developments in industrial sectors are facing, presenting several research challenges and open issues that should guide future development for evolution towards an environment-friendly Industry 5.0. The challenges presented for AI-based applications in industrial environments include issues related to complexity, multidisciplinary and heterogeneity, convergence of AI with other technologies, energy consumption and efficiency, knowledge acquisition, reasoning with limited data, fusion of heterogeneous data, availability of reliable data sets, verification, validation, and testing for decision-making processes.

Download or read book Nutritional Care of the Patient with Gastrointestinal Disease written by Alan L Buchman and published by CRC Press. This book was released on 2015-08-06 with total page 3428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This evidence-based book serves as a clinical manual as well as a reference guide for the diagnosis and management of common nutritional issues in relation to gastrointestinal disease. Chapters cover nutrition assessment; macro- and micronutrient absorption; malabsorption; food allergies; prebiotics and dietary fiber; probiotics and intestinal microflora; nutrition and GI cancer; nutritional management of reflux; nutrition in IBS and IBD; nutrition in acute and chronic pancreatitis; enteral nutrition; parenteral nutrition; medical and endoscopic therapy of obesity; surgical therapy of obesity; pharmacologic nutrition, and nutritional counseling.

Download or read book Recent Innovations in Artificial Intelligence and Smart Applications written by Mostafa Al-Emran and published by Springer Nature. This book was released on 2022-10-01 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book tackles the recent research trends on the role of AI in advancing automotive manufacturing, augmented reality, sustainable development in smart cities, telemedicine, and robotics. It sheds light on the recent AI innovations in classical machine learning, deep learning, Internet of Things (IoT), Blockchain, knowledge representation, knowledge management, big data, and natural language processing (NLP). The edited book covers empirical and reviews studies that primarily concentrate on the aforementioned issues, which would assist scholars in pursuing future research in the domain and identifying the possible future developments of AI applications.

Download or read book Effective Strategy Execution written by Bernd Heesen and published by Springer. This book was released on 2015-09-04 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book demonstrates how an improved strategic management approach, leveraging established management concepts in conjunction with the innovative technology solutions offered by business intelligence, can lead to better performance. It presents the three main barriers to effective strategy execution and explains how they can be overcome. Creating a shared understanding of the strategy at all levels of the organization using a Value ScorecardTM and following the Strategic Alignment ProcessTM allow organizations to measure and monitor performance. Strategic Alignment Remote ControlTM is presented as the ultimate tool for managers to remain in control of their business. Seven case studies from different industries across the globe provide examples of how the organizational performance can be improved. They include companies like Daimler, Tetra-Pak, Würth, Germany's Federal Employment Agency, the city of Aix-Les-Bains, and Giesecke & Devrient. Additional examples from organizations like Disney, Marriott, Volkswagen, Avis, FedEx, and Harrahs help to demonstrate how applying the concepts introduced adds unique value. The second edition of this book has been updated and improved. Additionally it includes a separate section on decision-making under uncertainty and the results of a survey on the adoption of business intelligence.

Download or read book Mastering Computer Knowledge written by Vijay Kumar Yadav and published by Vijay Kumar Yadav . This book was released on with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: **Mastering Computer Knowledge** is your essential guide to understanding the complex world of computers and technology. This comprehensive book covers everything from the basics of what a computer is to the intricacies of programming, cloud computing, and artificial intelligence. You’ll start with an introduction to computer components, both hardware and software, and move on to explore operating systems like Windows, macOS, and Linux. The book delves into crucial topics such as computer networks, cybersecurity, and the fundamentals of coding, providing you with the knowledge needed to navigate the digital landscape confidently. You’ll learn about the software development life cycle, databases, and version control systems like Git, as well as the basics of application development. *Mastering Computer Knowledge* also offers insights into the latest trends in cloud computing, artificial intelligence, and big data, showing you how these technologies are transforming industries. Additionally, it explores emerging technologies like quantum computing, the Internet of Things (IoT), and virtual/augmented reality, preparing you for the future of technology. Whether you’re a beginner or looking to deepen your understanding, this book equips you with the skills and knowledge to excel in the ever-evolving world of technology.

Download or read book Artificial Intelligence written by Cherry Bhargava and published by CRC Press. This book was released on 2021-07-28 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive reference text discusses the fundamental concepts of artificial intelligence and its applications in a single volume. Artificial Intelligence: Fundamentals and Applications presents a detailed discussion of basic aspects and ethics in the field of artificial intelligence and its applications in areas, including electronic devices and systems, consumer electronics, automobile engineering, manufacturing, robotics and automation, agriculture, banking, and predictive analysis. Aimed at senior undergraduate and graduate students in the field of electrical engineering, electronics engineering, manufacturing engineering, pharmacy, and healthcare, this text: Discusses advances in artificial intelligence and its applications. Presents the predictive analysis and data analysis using artificial intelligence. Covers the algorithms and pseudo-codes for different domains. Discusses the latest development of artificial intelligence in the field of practical speech recognition, machine translation, autonomous vehicles, and household robotics. Covers the applications of artificial intelligence in fields, including pharmacy and healthcare, electronic devices and systems, manufacturing, consumer electronics, and robotics.

Download or read book IoT Streams for Data Driven Predictive Maintenance and IoT Edge and Mobile for Embedded Machine Learning written by Joao Gama and published by Springer Nature. This book was released on 2021-01-09 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes selected papers from the Second International Workshop on IoT Streams for Data-Driven Predictive Maintenance, IoT Streams 2020, and First International Workshop on IoT, Edge, and Mobile for Embedded Machine Learning, ITEM 2020, co-located with ECML/PKDD 2020 and held in September 2020. Due to the COVID-19 pandemic the workshops were held online. The 21 full papers and 3 short papers presented in this volume were thoroughly reviewed and selected from 35 submissions and are organized according to the workshops and their topics: IoT Streams 2020: Stream Learning; Feature Learning; ITEM 2020: Unsupervised Machine Learning; Hardware; Methods; Quantization.