Download or read book Kinetic investigation of different supported catalysts for the polymerization of propylene under industrially relevant conditions written by Joana Kettner and published by Cuvillier Verlag. This book was released on 2019-05-14 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scope of the work is the kinetic investigation of two fourth generation Ziegler-Natta catalysts as well as a supported metallocene catalyst for the polymerization of propylene under industrially relevant conditions and the development of simplified phenomenological kinetic models describing the polymerizations. Therein, the influence of different reaction conditions (temperature, pressure, hydrogen concentration) and, in particular, the effect of prepolymerization on catalyst kinetics as well as on polymer characteristics are studied. The Ziegler-Natta catalysts were investigated under gas-phase conditions in a 5 l horizontal stirred tank reactor operating in semi-batch mode. Both catalysts showed a similar kinetic behavior as well as hydrogen response at the different reaction conditions. Applying a prepolymerization led to an increase in activity at higher reaction temperatures as well as an improved polymer morphology. The impact of prepolymerization is catalyst specific and depends on the catalyst activity reached at main polymerization temperature. The supported metallocene catalyst was studied under bulk conditions in liquid propylene using a special 250 ml reaction calorimeter. A focus was set on procedure development (in-situ and external prepolymerization) with the target of defined prepolymerization conditions and early access to the kinetic profile. Final kinetic measurements were carried out using the developed external prepolymerization procedure. Based on the experimental studies, simplified phenomenological kinetic models are developed for each catalyst type enabling the quantitative description of the polymerization reactions at the different reaction conditions including the effect of prepolymerization. Main hypothesis for the mathematical description of the prepolymerization effect is that particle overheating at the beginning of the polymerization is the major reason for lower activities obtained when no prepolymerization is applied. For particle modeling, a quasi-homogeneous particle model is assumed considering particle growth and particle heat-transfer. As similar kinetic behaviors were observed for both Ziegler-Natta catalysts, the same kinetic model can be used; differences can only be described by the catalyst specific amount of polymerization active component. A similar kinetic model approach is used to describe the bulk polymerization with metallocene catalyst. Differences regarding the different polymerization regime, in particular monomer concentration in the polymer particle, hydrogen concentration in liquid phase, are considered. With the estimated sets of kinetic parameters, average activities and average molecular weights can be calculated as well as activity profiles of the catalysts can be quantitatively described at the different reaction conditions.

Download or read book Kinetic Study of Bulk Propylene Homo polymerization and Propylene ethylene Gas phase Copolymerization Under Industrially Relevant Conditions written by Sina Valaei and published by . This book was released on 2023* with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polypropylene, Ziegler-Natta catalysts, bulk-phase polymerization, gas-phase copolymerization, reaction kinetics, calorimetry, multi-component equilibrium, kinetic model, parameter estimation.

Download or read book Metalorganic Catalysts for Synthesis and Polymerization written by Walter Kaminsky and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: 45 years after the discovery of transition metals and organometallics as cocatalysts for the polymerization of olefins and for organic synthesis, these compounds have not lost their fascination. The birthday of Karl Ziegler, the great pioneer in this metalorganic catalysis, is now 100 years ago. Polyolefins and polydienes produced by Ziegler-Natta catalysis are the most important plastics and elastomers. New impulses for the polymerization of olefins have been brought about by highly active metallocenes and other single site catalysts. Just by changing the ligands of the organometallic compounds, the structure of the polymers produced can be tailored in a wide manner. In invited lectures and posters, relevant aspects of the metalorganic catalysts for synthesis and polymerization are discussed in this book. This includes mechanism and kinetics, stereochemistry, material properties, and industrial applications.

Download or read book Catalyst Design for Tailor Made Polyolefins written by M. Terano and published by Elsevier. This book was released on 1994-11-01 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent development of olefin polymerization catalysts has caused marked changes in both industrial and academic research. Industrial use of homogeneous metallocene catalysts has already begun in the fields of high density polyethylene and syndiotactic polypropylene. Moreover, important data have been obtained from academic investigations which have proved useful for understanding conventional heterogeneous Ziegler-Natta catalysts. From the industrial viewpoint, however, heterogeneous high-yield catalysts seem to be more important. The present volume contains invited lectures and contributed papers. The following topics are covered: (1) Heterogeneous Catalysts, (2) Metallocene Catalysts and (3) New Trends in the Polyolefin Industry.

Download or read book Introduction to Industrial Polypropylene written by Dennis B. Malpass and published by John Wiley & Sons. This book was released on 2012-07-02 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introductory text is an important resource for new engineers, chemists, students, and chemical industry personnel to understand the technical aspects of polypropylene which is the 2nd largest synthetics polymer in manufactured output. The book considers the following topics: What are the principal types of polypropylene and how do they differ? What catalysts are used to produce polypropylene and how do they function? What is the role of cocatalysts and how have they evolved over the years? How are industrial polypropylene catalysts tested and the resultant polymer evaluated? What processes are used in the manufacture of polypropylene? What are the biopolymer alternatives to polypropylene? What companies are the major industrial manufacturers of polypropylene? What is the environmental fate of polypropylene?

Download or read book A Study of Supported Catalysts for Propylene Polymerization written by S. Cai and published by . This book was released on 1982 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Alkene Polymerization Reactions with Transition Metal Catalysts written by Yury Kissin and published by Elsevier. This book was released on 2008-03-10 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past 30 years, the field of alkene polymerization over transition metal catalysts underwent several major changes:1. The list of commercial heterogeneous Ziegler-Natta catalysts for the synthesis of polyethylene and stereoregular polyolefins was completely renewed affording an unprecedented degree of control over the polymer structure.2. Research devoted to metallocene and other soluble transition-metal catalysis has vastly expanded and has shifted toward complexes of transition metals with multidentate ligands.3. Recent developments in gel permeation chromatography, temperature-rising fractionation, and crystallization fractionation provided the first reliable information about differences between various active centers in transition-metal catalysts.4. A rapid development of high-resolution 13C NMR spectroscopy resulted in greatly expanded understanding of the chemical and steric features of polyolefins and alkene copolymers. These developments require a new review of all aspects of alkene polymerization reactions with transition-metal catalysts. The first chapter in the book is an introductory text for researchers who are entering the field. It describes the basic principles of polymerization reactions with transition-metal catalysts, the types of catalysts, and commercially manufactured polyolefins. The next chapter addresses the principal issue of alkene polymerization catalysis: the existence of catalyst systems with single and multiple types of active centers. The subsequent chapters are devoted to chemistry and stereochemistry of elemental reaction steps, structures of catalyst precursors and reactions leading to the formation of active centers, kinetics of polymerization reactions, and their mechanisms. The book describes the latest commercial polymerization catalysts for the synthesis of polyethylenes and polypropylene The book provides a detailed description of the multi-center nature of commercial Ziegler-Natta catalysts. The book devotes specialized chapters to the most important aspects of transition metal polymerization catalysts: the reactions leading to the formation of active centers, the chemistry and stereochemistry of elemental polymerization steps, reaction kinetics, and the polymerization mechanism. The book contains an introductory chapter for researchers who are entering the field of polymerization catalysis. It describes the basic principles of polymerization reactions with transition-metal catalysts and the types of commercially manufactured polyolefins and copolymersThe book contains over 2000 references, the most recent up to end of 2006.

Download or read book A Study of Supported Catalysts for Propylene Polymerization written by S. Cai and published by . This book was released on 1982 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Olefin Polymerization with Supported Metallocene Catalysts written by Shreyas Chakravarti and published by . This book was released on 2000 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ziegler Natta Catalysts Polymerizations written by John Jr. Boor and published by Elsevier. This book was released on 2012-12-02 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ziegler-Natta Catalysts and Polymerizations reviews the general aspects of Ziegler-Natta catalysts and polymerizations of olefins, dienes, and many other types of monomers. Topics covered include the physical state of the polymer during polymerization; modification of Ziegler-Natta catalysts by third components; and termination of polymer chain growth. The oxidation state of catalysts and active centers is also discussed, along with copolymerizations and block polymerizations. This book is comprised of 23 chapters and begins with an overview of Ziegler-Natta catalysts and polymerizations, their historical origins, scientific and commercial importance, and major advances in polymer science. The next chapter focuses on definitions and stereochemistry of Ziegler-Natta catalysts, together with analytical methods used to identify and quantitatively measure their structures. Some of the polymers produced commercially with Ziegler-Natta catalysts are considered. The discussion then turns to mechanisms for initiating and propagating olefins; mechanisms for stereochemical control of conjugated and nonconjugated dienes; and the basic kinetic parameters that characterize Ziegler-Natta polymerizations. This monograph is written especially for chemistry and engineering graduate students and for industrial chemists, engineers, and managers who may become involved in a Ziegler-Natta problem.

Download or read book Handbook of Transition Metal Polymerization Catalysts written by Ray Hoff and published by John Wiley & Sons. This book was released on 2010-09-16 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: A one-stop resource for understanding and applying polymerization catalysts An edited volume featuring contributions from leading researchers, the Handbook of Transition Metal Polymerization Catalysts covers the design and synthesis of catalysts, and their applications in synthesis of polymers. Dealing with those polymerization catalysts that afford commercially acceptable yields of polymer with respect to catalyst mass and promising newer catalysts, this practical reference provides polymer and organic chemists with a comprehensive overview of the known methods for developing and applying these important catalysts. With both recent advances and historically important catalysts, the subjects covered in this text include: Metal alkyls and other compounds that function as co-catalysts with a large number of catalysts The varieties of porous silica either necessary or valuable in certain catalyst formulations Catalyst scale-up and commercialization Copper catalysts for olefin polymerization Morphology control Along with the above topics, the Handbook of Transition Metal Polymerization Catalysts provides tables of valuable data to assist in reproducing a synthesis or applying the knowledge to a new problem. Polymerization reactivities, polymer properties, monomer and solvent purity requirements, molecular weights, distribution, and reactivity ratios are also covered. The Handbook of Transition Metal Polymerization Catalysts offers an excellent one-stop resource for understanding and applying polymerization catalysts.

Download or read book Introduction to Industrial Polyethylene written by Dennis B. Malpass and published by John Wiley & Sons. This book was released on 2010-12-17 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Demystifies the largest volume manmade synthetic polymer by distillingthe fundamentals of what polyethylene is, how it's made and processed,and what happens to it after its useful life is over. Endorsement for Introduction to Industrial Polyethylene "I found this to be a straightforward, easy-to-read, and useful introductory text on polyethylene, which will be helpful for chemists, engineers, and students who need to learn more about this complex topic. The author is a senior polyethylene specialist and I believe we can all benefit from his distillation of knowledge and insight to quickly grasp the key learnings." —R.E. King III; Ciba Corporation (part of the BASF group) Jargon used in industrial polyethylene technology can often be bewildering to newcomers. Introduction to Industrial Polyethylene educates readers on terminology commonly used in the industry and demystifies the chemistry of catalysts and cocatalysts employed in the manufacture of polyethylene. This concise primer reviews the history of polyethylene and introduces basic features and nomenclatures for this versatile polymer. Catalysts and cocatalysts crucial to the production of polyethylene are discussed in the first few chapters. Latter chapters provide an introduction to the processes used to manufacture polyethylene and discuss matters related to downstream applications of polyethylene such as rheology, additives, environmental issues, etc. Providing industrial chemists and engineers a valuable reference tool that covers fundamental features of polyethylene technology, Introduction to Industrial Polyethylene: Identifies the fundamental types of polyethylene and how they differ. Lists markets, key fabrication methods, and the major producers of polyethylene. Provides biodegradable alternatives to polyethylene. Describes the processes used in the manufacture of polyethylene. Includes a thorough glossary, providing definitions of acronyms and abbreviations and also defines terms commonly used in discussions of production and properties of polyethylene. Concludes with the future of industrial polyethylene.

Download or read book Propylene Polymerization Using 4th Generation Ziegler Natta Catalysts written by Ahmad Alshaiban and published by . This book was released on 2011 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: A systematic study of propylene polymerization using a 4th generation Ziegler-Natta catalyst is presented in this thesis.

Download or read book The Polymerization of Propylene on Ziegler Natta Catalysts in Slurry Phase Reactors written by Geoffrey Ernest Mann and published by . This book was released on 1985 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Kinetic Studies and Active Centre Determination on Highly Active Ziegler Natta Catalysts for Propylene Polymerization written by I. A. Jaber and published by . This book was released on 1986 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Polypropylene Handbook written by József Karger-Kocsis and published by Springer. This book was released on 2019-03-18 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book extensively reviews Polypropylene (PP), the second most widely produced thermoplastic material, having been produced for over 60 years. Its synthesis, processing and application are still accompanied by vigorous R&D developments because the properties of PP are at the borderline between those of commodity and engineering thermoplastics. Readers are introduced to various tacticities and polymorphs of PP, and their effects on structural properties. Further, the book addresses the control of optical properties using nucleants, provides strategies for overcoming the limited cold/impact resistance of PP, examines in detail the effects of recycling, and presents guidelines for the property modification of PPs through foaming, filling and reinforcing with respect to target applications. Special attention is paid to descriptions and models of properties as a function of morphological variables. Last but not least, the book suggests potential practical applications of PP-based systems, especially in the packaging, appliances, building/construction, textile and automotive sectors. Each chapter, written by internationally respected scientists, reflects the current state-of-art in the respective field and offers a vital source of information for students, researchers and engineers interested in the morphology, properties, testing and modeling of PP and PP-based systems. The content is indispensable to the appropriate application of PPs and related composites.

Download or read book Studies on Homogeneneous and Supported Metallocene Catalysts for Propylene Polymerization written by Ratna Ediati and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: