Download or read book IUTAM Symposium on Intelligent Multibody Systems Dynamics Control Simulation written by Evtim Zahariev and published by . This book was released on 2019 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, which brings together research presented at the IUTAM Symposium Intelligent Multibody Systems - Dynamics, Control, Simulation, held at Sozopol, Bulgaria, September 11-15, 2017, focuses on preliminary virtual simulation of the dynamics of motion, and analysis of loading of the devices and of their behaviour caused by the working conditions and natural phenomena. This requires up-to-date methods for dynamics analysis and simulation, novel methods for numerical solution of ODE and DAE, real-time simulation, passive, semi-passive and active control algorithms. Applied examples are mechatronic (intelligent) multibody systems, autonomous vehicles, space structures, structures exposed to external and seismic excitations, large flexible structures and wind generators, robots and bio-robots. The book covers the following subjects: -Novel methods in multibody system dynamics; -Real-time dynamics; -Dynamic models of passive and active mechatronic devices; -Vehicle dynamics and control; -Structural dynamics; -Deflection and vibration suppression; -Numerical integration of ODE and DAE for large scale and stiff multibody systems; -Model reduction of large-scale flexible systems. The book will be of interest for scientists and academicians, PhD students and engineers at universities and scientific institutes.

Download or read book IUTAM Symposium on Intelligent Multibody Systems Dynamics Control Simulation written by Evtim Zahariev and published by Springer. This book was released on 2019-01-09 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, which brings together research presented at the IUTAM Symposium Intelligent Multibody Systems – Dynamics, Control, Simulation, held at Sozopol, Bulgaria, September 11-15, 2017, focuses on preliminary virtual simulation of the dynamics of motion, and analysis of loading of the devices and of their behaviour caused by the working conditions and natural phenomena. This requires up-to-date methods for dynamics analysis and simulation, novel methods for numerical solution of ODE and DAE, real-time simulation, passive, semi-passive and active control algorithms. Applied examples are mechatronic (intelligent) multibody systems, autonomous vehicles, space structures, structures exposed to external and seismic excitations, large flexible structures and wind generators, robots and bio-robots. The book covers the following subjects: -Novel methods in multibody system dynamics; -Real-time dynamics; -Dynamic models of passive and active mechatronic devices; -Vehicle dynamics and control; -Structural dynamics; -Deflection and vibration suppression; -Numerical integration of ODE and DAE for large scale and stiff multibody systems; -Model reduction of large-scale flexible systems. The book will be of interest for scientists and academicians, PhD students and engineers at universities and scientific institutes.

Download or read book Advances in Musculoskeletal Modeling and their Application to Neurorehabilitation written by Naser Mehrabi and published by Frontiers Media SA. This book was released on 2020-12-10 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: This eBook is a collection of articles from a Frontiers Research Topic. Frontiers Research Topics are very popular trademarks of the Frontiers Journals Series: they are collections of at least ten articles, all centered on a particular subject. With their unique mix of varied contributions from Original Research to Review Articles, Frontiers Research Topics unify the most influential researchers, the latest key findings and historical advances in a hot research area! Find out more on how to host your own Frontiers Research Topic or contribute to one as an author by contacting the Frontiers Editorial Office: frontiersin.org/about/contact.

Download or read book Multibody Dynamics 2019 written by Andrés Kecskeméthy and published by Springer. This book was released on 2019-06-28 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this work, outstanding, recent developments in various disciplines, such as structural dynamics, multiphysic mechanics, computational mathematics, control theory, biomechanics, and computer science, are merged together in order to provide academicians and professionals with methods and tools for the virtual prototyping of complex mechanical systems. Each chapter of the work represents an important contribution to multibody dynamics, a discipline that plays a central role in the modelling, analysis, simulation and optimization of mechanical systems in a variety of fields and for a wide range of applications.

Download or read book IUTAM Symposium on Dynamics Modeling and Interaction Control in Virtual and Real Environments written by Gábor Stépán and published by Springer Science & Business Media. This book was released on 2011-07-01 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the invited papers presented at the IUTAM Symposium on Multibody Dynamics and Interaction Control in Virtual and Real Environments held in Budapest, Hungary, June 7−11 2010. The symposium aimed to bring together specialists in the fields of multibody system modeling, contact/collision mechanics and control of mechanical systems. The offered topics included modeling aspects, mechanical and mathematical models, the question of neglections and simplifications, reduction of large systems, interaction with environment like air, water and obstacles, contact of all types, control concepts, control stability and optimization. Discussions between experts in these fields made it possible to exchange ideas about the recent advances in multibody system modeling and interaction control, as well as about the possible future trends. The presentations of recent scientific results may facilitate the interaction between scientific areas like system/control engineering and mechanical engineering. Papers on dynamics modeling and interaction control were selected to cover the main areas: mathematical modeling, dynamic analysis, friction modeling, solid and thermomechanical aspects, and applications. A significant outcome of the meeting was the opening towards applications that are of key importance to the future of nonlinear dynamics.

Download or read book IUTAM Symposium on Solver Coupling and Co Simulation written by Bernhard Schweizer and published by Springer. This book was released on 2019-05-14 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the Proceedings of the IUTAM Symposium on Solver Coupling and Co-Simulation that was held in Darmstadt, Germany, September 18-20, 2017. The symposium focused on recent advances in the development of numerical methods for solver coupling, like new explicit, implicit and semi-implicit co-simulation methods, new approaches for realizing variable communication-time grids, and advances in the stability and convergence analysis of solver coupling methods. Recent developments in the practical application of co-simulation methods, for instance new fields of application for solver coupling approaches, new developments in the parallelization of dynamic models with co-simulation techniques, and standardization of co-simulation interfaces, i.e. standardization of data and model exchange were also discussed. The book brings together the research results of leading scientists in applied mathematics, mechanics, and engineering science, thus contributing to further develop numerical methods for coupled simulations.

Download or read book HCI International 2023 Late Breaking Papers written by Vincent G. Duffy and published by Springer Nature. This book was released on 2023-12-19 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: This seven-volume set LNCS 14054-14060 constitutes the proceedings of the 25th International Conference, HCI International 2023, in Copenhagen, Denmark, in July 2023. For the HCCII 2023 proceedings, a total of 1578 papers and 396 posters was carefully reviewed and selected from 7472 submissions. Additionally, 267 papers and 133 posters are included in the volumes of the proceedings published after the conference, as “Late Breaking Work”. These papers were organized in the following topical sections: HCI Design and User Experience; Cognitive Engineering and Augmented Cognition; Cultural Issues in Design; Technologies for the Aging Population; Accessibility and Design for All; Designing for Health and Wellbeing; Information Design, Visualization, Decision-making and Collaboration; Social Media, Creative Industries and Cultural Digital Experiences; Digital Human Modeling, Ergonomics and Safety; HCI in Automated Vehicles and Intelligent Transportation; Sustainable Green Smart Cities and Smart Industry; eXtended Reality Interactions; Gaming and Gamification Experiences; Interacting with Artificial Intelligence; Security, Privacy, Trust and Ethics; Learning Technologies and Learning Experiences; eCommerce, Digital Marketing and eFinance.

Download or read book Software Technologies Applications and Foundations written by Manuel Mazzara and published by Springer. This book was released on 2018-12-06 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the thoroughly refereed technical papers presented in eight workshops collocated with the International Conference on Software Technologies: Applications and Foundations, STAF 2018, held in Toulouse, France, in June 2018. The 65 full papers presented were carefully reviewed and selected from 120 submissions. The events whose papers are included in this volume are: CoSim-CPS 2018: 2nd International Workshop on Formal Co-Simulation of Cyber-Physical Systems DataMod 2018: 7th International Symposium From Data to Models and Back FMIS 2018: 7th International Workshop on Formal Methods for Interactive Systems FOCLASA 2018: 16th International Workshop on Foundations of Coordination Languages and Self-adaptative Systems GCM 2018: 9th International Workshop on Graph Computation Models MDE@DeRun 2018: 1st International Workshop on Model-Driven Engineering for Design-Runtime Interaction in Complex Systems MSE 2018: 3rd International Workshop on Microservices: Science and Engineering SecureMDE 2018: 1st International Workshop on Security for and by Model-Driven Engineering

Download or read book IUTAM Symposium on Smart Structures and Structronic Systems written by Ulrich Gabbert and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the IUTAM Symposium on Smart Structures and Structronic Systems, held in Magdeburg, Germany, 26-29 September 2000

Download or read book IUTAM Symposium on Multiscale Problems in Multibody System Contacts written by Peter Eberhard and published by Springer Science & Business Media. This book was released on 2007-05-26 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: The investigation of multiscale problems in multibody system contacts is an interesting and timely topic which has been the subject of intensive research. This IUTAM Symposium facilitated discussions between researchers active in the field. This proceedings volume summarizes contributions of many authors active in the field and gives insight in very different areas of this fascinating research. It reviews the state-of-the-art and identifies future hot topics.

Download or read book Virtual Nonlinear Multibody Systems written by Werner Schiehlen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains an edited versIOn of lectures presented at the NATO ADVANCED STUDY INSTITUTE on VIRTUAL NONLINEAR MUL TIBODY SYSTEMS which was held in Prague, Czech Republic, from 23 June to 3 July 2002. It was organized by the Department of Mechanics, Faculty of Mechanical Engineering, Czech Technical University in Prague, in cooperation with the Institute B of Mechanics, University of Stuttgart, Germany. The ADVANCED STUDY INSTITUTE addressed the state of the art in multibody dynamics placing special emphasis on nonlinear systems, virtual reality, and control design as required in mechatronics and its corresponding applications. Eighty-six participants from twenty-two countries representing academia, industry, government and research institutions attended the meeting. The high qualification of the participants contributed greatly to the success of the ADVANCED STUDY INSTITUTE in that it promoted the exchange of experience between leading scientists and young scholars, and encouraged discussions to generate new ideas and to define directions of research and future developments. The full program of the ADVANCED STUDY INSTITUTE included also contributed presentations made by participants where different topics were explored, among them: Such topics include: nonholonomic systems; flexible multibody systems; contact, impact and collision; numerical methods of differential-algebraical equations; simulation approaches; virtual modelling; mechatronic design; control; biomechanics; space structures and vehicle dynamics. These presentations have been reviewed and a selection will be published in this volume, and in special issues of the journals Multibody System Dynamics and Mechanics of Structures and Machines.

Download or read book IUTAM Symposium on Chaotic Dynamics and Control of Systems and Processes in Mechanics written by Giuseppe Rega and published by Springer Science & Business Media. This book was released on 2006-06-22 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interest of the applied mechanics community in chaotic dynamics of engineering systems has exploded in the last fifteen years, although research activity on nonlinear dynamical problems in mechanics started well before the end of the Eighties. It developed first within the general context of the classical theory of nonlinear oscillations, or nonlinear vibrations, and of the relevant engineering applications. This was an extremely fertile field in terms of formulation of mechanical and mathematical models, of development of powerful analytical techniques, and of understanding of a number of basic nonlinear phenomena. At about the same time, meaningful theoretical results highlighting new solution methods and new or complex phenomena in the dynamics of deterministic systems were obtained within dynamical systems theory by means of sophisticated geometrical and computational techniques. In recent years, careful experimental studies have been made to establish the actual occurrence and observability of the predicted dynamic phenomena, as it is vitally needed in all engineering fields. Complex dynamics have been shown to characterize the behaviour of a great number of nonlinear mechanical systems, ranging from aerospace engineering applications to naval applications, mechanical engineering, structural engineering, robotics and biomechanics, and other areas. The International Union of Theoretical and Applied Mechanics grasped the importance of such complex phenomena in the Eighties, when the first IUTAM Symposium devoted to the general topic of nonlinear and chaotic dynamics in applied mechanics and engineering was held in Stuttgart (1989).

Download or read book IUTAM Symposium on Multiscale Modeling and Characterization of Elastic Inelastic Behavior of Engineering Materials written by S. Ahzi and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this proceeding are a collection of the works presented at the IUTAM symposium-Marrakech 2002 (October 20-25) which brought together scientists from various countries. These papers cover contemporary topics in multiscale modeling and characterization of materials behavior of engineering materials. They were selected to focus on topics related to deformation and failure in metals, alloys, intermetallics and polymers including: experimental techniques, deformation and failure mechanisms, dislocation-based modelling, microscopic-macroscopic averaging schemes, application to forming processes and to phase transformation, localization and failure phenomena, and computational advances. Key areas that are covered by some of the papers include modeling of material deformation at various scales. At the atomistic scale, results from MD simulations pertaining to deformation mechanisms in nano-crystalline materials as well as dislocation-defect interactions are presented. Advances in modeling of deformation in metals using discrete dislocation analyses are also presented, providing an insight into this emerging scientific technique that can be used to model deformation at the microscale. These papers address current engineering problems, including deformation of thin fIlms, dislocation behavior and strength during nanoindentation, strength in metal matrix composites, dislocation-crack interaction, development of textures in polycrystals, and problems involving twining and shape memory behavior. On Behalf of the organizing committee, I would like to thank Professor P.

Download or read book IUTAM Symposium on Vibration Control of Nonlinear Mechanisms and Structures written by H. Ulbrich and published by Springer Science & Business Media. This book was released on 2006-01-28 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last decades, the growth of micro-electronics has reduced the cost of computing power to a level acceptable to industry and has made possible sophisticated control strategies suitable for many applications. Vibration c- trol is applied to all kinds of engineering systems to obtain the desired dynamic behavior, improved accuracy and increased reliability during operation. In this context, one can think of applications related to the control of structures’ vib- tion isolation, control of vehicle dynamics, noise control, control of machines and mechanisms and control of ?uid-structure-interaction. One could continue with this list for a long time. Research in the ?eld of vibration control is extremely comprehensive. Pr- lems that are typical for vibration control of nonlinear mechanisms and str- tures arise in the ?elds of modeling systems in such a way that the model is suitable for control design, to choose appropriate actuator and sensor locations and to select the actuators and sensors. Theobjective of the Symposium was to present anddiscuss methodsthat contribute to thesolution of such problems and to demonstrate the state of the art inthe ?eld shown by typical examples. The intention was to evaluate the limits of performance that can beachievedby controlling the dynamics, and to point out gaps in present research and give links for areas offuture research.Mainly, it brought together leading experts from quite different areas presenting theirpoints of view.

Download or read book IUTAM Symposium on Interaction between Dynamics and Control in Advanced Mechanical Systems written by Dick H. van Campen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last decades, applications of dynamical analysis in advanced, often nonlinear, engineering systems have been evolved in a revolutionary way. In this context one can think of applications in aerospace engineering like satellites, in naval engineering like ship motion, in mechanical engineering like rotating machinery, vehicle systems, robots and biomechanics, and in civil engineering like earthquake dynamics and offshore technology. One could continue with this list for a long time. The application of advanced dynamics in the above fields has been possible due to the use of sophisticated computational techniques employing powerful concepts of nonlinear dynamics. These concepts have been and are being developed in mathematics, mechanics and physics. It should be remarked that careful experimental studies are vitally needed to establish the real existence and observability of the predicted dynamical phenomena. The interaction between nonlinear dynamics and nonlinear control in advanced engineering systems is becoming of increasing importance because of several reasons. Firstly, control strategies in nonlinear systems are used to obtain desired dynamic behaviour and improved reliability during operation, Applications include power plant rotating machinery, vehicle systems, robotics, etc. Terms like motion control, optimal control and adaptive control are used in this field of interest. Since mechanical and electronic components are often necessary to realize the desired action in practice, the engineers use the term mechatronics to indicate this field. If the desired dynamic behaviour is achieved by changing design variables (mostly called system parameters), one can think of fields like control of chaos.

Download or read book IUTAM Symposium on Asymptotics Singularities and Homogenisation in Problems of Mechanics written by A.B. Movchan and published by Springer. This book was released on 2006-05-09 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the IUTAM Symposium held in Liverpool, UK, 8-11 July 2002

Download or read book IUTAM Symposium on Mesoscopic Dynamics of Fracture Process and Materials Strength written by H. Kitagawa and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers presented at the IUT AM Symposium of "Mesoscopic Dynamics of Fracture Process and Materials Strength", held in July 2003, at the Hotel Osaka Sun Palace, Osaka, Japan. The Symposium was proposed in 2001, aiming at organizing concentrated discussions on current understanding of fracture process and inhomogeneous deformation governing the materials strength with emphasis on the mesoscopic dynamics associated with evolutional mechanical behaviour under micro/macro mutual interaction. The decision of the General Assembly of International Union of Theoretical and Applied Mechanics (IUT AM) to accept our proposal was well-timed and attracted attention. Driven by the development of new theoretical and computational techniques, various novel challenges to investigate the mesoscopic dynamics have been actively done recently, including large-scaled 3D atomistic simulations, discrete dislocation dynamics and other micro/mesoscopic computational analyses. The Symposium attracted sixty-six participants from eight countries, and forty two papers were presented. The presentations comprised a wide variety of fundamental subjects of physics, mechanical models, computational strategies as well as engineering applications. Among the subjects, discussed are (a) dislocation patterning, (b) crystal plasticity, (c) characteristic fracture of amorphous/nanocrystal, (d) nano-indentation, (e) ductile-brittle transition, (f) ab-initio calculation, (g) computational methodology for multi-scale analysis and others.