Download or read book IUTAM Symposium on Asymptotic Methods for Turbulent Shear Flows at High Reynolds Numbers written by K. Gersten and published by Springer. This book was released on 1996-07-31 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the contributions presented at the IUTAM Symposium on Asymptotic Methods for Turbulent Shear Flows, which was the first international conference on the subject. The book provides an overview of the state of the art in this field and presents results found worldwide. Asymptotic theory is here considered as the application of perturbation methods (singular perturbation methods, multiscale methods, rapid distortion theory etc.) to solving the Reynolds- averaged flow equations for turbulent shear flows at high Reynolds numbers. These methods play an important role in turbulence modelling, as is demonstrated by many examples, including turbulence models describing flow separation. It becomes evident that asymptotic methods enable the extraction of a fairly comprehensive set of results from the governing equations without incorporating a specific turbulence model a priori. Furthermore, these methods can be used to quickly eliminate unsatisfactory models. The book contains valuable results for turbulence researchers, in particular for those working in turbulence modelling.
Download or read book IUTAM Symposium on Reynolds Number Scaling in Turbulent Flow written by Alexander J. Smits and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents selected papers from the IUTAM Symposium on Reynolds Number Scaling in Turbulent Flow, convened in Princeton, NJ, USA, September I1-13, 2002. The behavior ofturbulence at high Reynolds number is interesting from a fundamental point of view, in that most theories of turbulence make very specific predictions in the limit of infinite Reynolds number. From a more practical point of view, there exist many applications that involve turbulent flow where the Reynolds numbers are extremely large. For example, large vehicles such as submarines and commercial transports operate at Reynolds 9 numbers based on length ofthe order oft0 , and industrial pipe flows cover a 7 very wide range of Reynolds numbers up to 10 • Many very important applications of high Reynolds number flow pertain to atmospheric and other geophysical flows where extremely high Reynolds numbers are the rule rather than the exception, and the understanding of climate changes and the prediction of destructive weather effects hinges to some extent on our appreciation ofhigh-Reynolds number turbulence behavior. The important effects of Reynolds number on turbulence has received a great deal of recent attention. The objective of the Symposium was to bring together many of the world's experts in this area to appraise the new experimental results, discuss new scaling laws and turbulence models, and to enhance our mutual understanding of turbulence.
Download or read book IUTAM Symposium on Geometry and Statistics of Turbulence written by T. Kambe and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers presented at the IUTAM Symposium on Geometry and Statistics of Turbulence, held in November 1999, at the Shonan International Village Center, Hayama (Kanagawa-ken), Japan. The Symposium was proposed in 1996, aiming at organizing concen trated discussions on current understanding of fluid turbulence with empha sis on the statistics and the underlying geometric structures. The decision of the General Assembly of International Union of Theoretical and Applied Mechanics (IUTAM) to accept the proposal was greeted with enthusiasm. Turbulence is often characterized as having the properties of mixing, inter mittency, non-Gaussian statistics, and so on. Interest is growing recently in how these properties are related to formation and evolution of struc tures. Note that the intermittency is meant for passive scalars as well as for turbulence velocity or rate of dissipation. There were eighty-eight participants in the Symposium. They came from thirteen countries, and fifty-seven papers were presented. The presenta tions comprised a wide variety of fundamental subjects of mathematics, statistical analyses, physical models as well as engineering applications. Among the subjects discussed are (a) Degree of self-similarity in cascade, (b) Fine-scale structures and degree of Markovian property in turbulence, (c) Dynamics of vorticity and rates of strain, (d) Statistics associated with vortex structures, (e) Topology, structures and statistics of passive scalar advection, (f) Partial differential equations governing PDFs of velocity in crements, (g) Thermal turbulences, (h) Channel and pipe flow turbulences, and others.
Download or read book IUTAM Symposium on Mechanics of Passive and Active Flow Control written by G.E.A. Meier and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: The call for papers for the rUTAM-Symposium on Mechanics of Passive and Active Flow Control brought an overwhelming response of applications for contributions. Fi nally 12 invited lectures, 48 papers and 23 posters were selected by thc Scientific Com mittee to be presented in the conference. 58 papers are published in this volume. Due to the limited number of pages available, poster presentations could not be considered for publication. The editors would like to thank all the members of the Scientific Committee for their very valuable assistance. The papers presented at the rUT AM Symposium were classified under three groups de voted to • Passive Control Methods, • Active Control Methods and • Control Concepts. This was done to contrast at first between the passive techniques where the control power is mainly supplied by the flow itself and the active techniques where the power is pro vided by external sources; the third group was devoted to control concepts for presenting methods of control theory and new techniques of flow control.
Download or read book IUTAM Symposium on Asymptotics Singularities and Homogenisation in Problems of Mechanics written by A.B. Movchan and published by Springer. This book was released on 2006-05-09 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the IUTAM Symposium held in Liverpool, UK, 8-11 July 2002
Download or read book IUTAM Symposium on Unsteady Separated Flows and their Control written by Marianna Braza and published by Springer Science & Business Media. This book was released on 2009-09-29 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Volume is the Proceedings of the IUTAM Symposium on Unsteady Separated Flows and Their Control held in Corfu, Greece, 18–22 June 2007. This was the second IUTAM Symposium on this subject, following the symposium in Toulouse, in April 2002. The Symposium consisted of single plenary sessions with invited lectures, - lected oral presentations, discussions on special topics and posters. The complete set of papers was provided to all participants at the meeting. The thematic sessions of this Symposium are presented in the following: Experimental techniques for the unsteady ow separation Theoretical aspects and analytical approaches of ow separation Instability and transition Compressibility effects related to unsteady separation Statistical and hybrid turbulence modelling for unsteady separated ows Direct and Large-Eddy Simulation of unsteady separated ows Theoretical/industrial aspects of unsteady separated ow control This IUTAM Symposium concerned an important domain of Theoretical and Applied Mechanics nowadays. It focused on the problem of ow separation and of its control. It achieved a uni ed approach regrouping the knowledge provided from theoretical, experimental, numerical simulation and modelling aspects for unsteady separated ows (incompressible and compressible regimes) and included ef cient control devices to achieve attenuation or suppression of separation. The subject - eas covered important themes in the domain of fundamental research as well as in the domain of applications.
Download or read book Trends in Structural Mechanics written by J. Roorda and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: The desire to understand the mechanics of elastic and plastic solids, new materials and the stability, reliability and dynamic behaviour of structures and their components under extreme environmental conditions has dominated research in structural engineering for many decades. Advances in these areas have revolutionized design methods, codes of practice, and the teaching of structural engineers. In this volume an international body of leading authorities presents some forty papers on current research directions in the specific areas of solid mechanics, structural computation, modern materials and their application, buckling and instability, design of structural systems and components, reliability, seismic analysis, and engineering education. They were presented at a symposium held July 10-12, 1994, at the University of Waterloo, Canada, to honour Professor Archibald Norbert Sherbourne who recently retired from a long and active career of teaching, research and academic administration at this University. The themes of the work contained within this volume reflect Professor Sherbourne's own research interests and will be of interest to both academics and practicing structural engineers.
Download or read book Nonlinear Dynamics and Chaotic Phenomena written by B.K Shivamoggi and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: FolJowing the formulation of the laws of mechanics by Newton, Lagrange sought to clarify and emphasize their geometrical character. Poincare and Liapunov successfuIJy developed analytical mechanics further along these lines. In this approach, one represents the evolution of all possible states (positions and momenta) by the flow in phase space, or more efficiently, by mappings on manifolds with a symplectic geometry, and tries to understand qualitative features of this problem, rather than solving it explicitly. One important outcome of this line of inquiry is the discovery that vastly different physical systems can actually be abstracted to a few universal forms, like Mandelbrot's fractal and Smale's horse-shoe map, even though the underlying processes are not completely understood. This, of course, implies that much of the observed diversity is only apparent and arises from different ways of looking at the same system. Thus, modern nonlinear dynamics 1 is very much akin to classical thermodynamics in that the ideas and results appear to be applicable to vastly different physical systems. Chaos theory, which occupies a central place in modem nonlinear dynamics, refers to a deterministic development with chaotic outcome. Computers have contributed considerably to progress in chaos theory via impressive complex graphics. However, this approach lacks organization and therefore does not afford complete insight into the underlying complex dynamical behavior. This dynamical behavior mandates concepts and methods from such areas of mathematics and physics as nonlinear differential equations, bifurcation theory, Hamiltonian dynamics, number theory, topology, fractals, and others.
Download or read book Computational Electromagnetics and Its Applications written by Thomas G. Campbell and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the first ICASE/LaRC Work shop on Computational Electromagnetics and Its Applications conducted by the Institute for Computer Applications in Science and Engineering and NASA Langley Research Center. We had several goals in mind when we decided, jointly with the Elec tromagnetics Research Branch, to organize this workshop on Computa tional Electromagnetics ( CEM). Among our goals were a desire to obtain an overview of the current state of CEM, covering both algorithms and ap plications and their effect on NASA's activities in this area. In addition, we wanted to provide an attractive setting for computational scientists with expertise in other fields, especially computational fluid dynamics (CFD), to observe the algorithms and tools of CEM at work. Our expectation was that scientists from both fields would discover mutually beneficial inter connections and relationships. Another goal was to learn of progress in solution algorithms for electromagnetic optimization and design problems; such problems make extensive use of field solvers and computational effi ciency is at a premium. To achieve these goals we assembled the renowned group of speakers from academia and industry whose talks are contained in this volume. The papers are printed in the same order in which the talks were pre sented at the meeting. The first paper is an overview of work currently being performed in the Electromagnetic Research Branch at the Langley Research Center.
Download or read book Mechanical Behaviour of Materials written by Dominique François and published by Springer Science & Business Media. This book was released on 1998 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in technology are demanding ever-increasing mastery over the materials being used: the challenge is to gain a better understanding of their behaviour, and more particularly of the relations between their microstructure and their macroscopic properties. This two-volume work, of which this is the first volume, aims to provide the means by which this challenge may be met. Starting from the mechanics of deformation, it develops the laws governing macroscopic behaviour - expressed as the constitutive equations - always taking account of the physical phenomena which underlie rheological behaviour. The most recent developments are presented, in particular those concerning heterogeneous materials such as metallic alloys, polymers and composites. Each chapter is devoted to one of the major classes of material behaviour. Volume I deals with elasticity and plasticity and Volume II with viscoelasticity, viscoplasticity, damage phenomena, and the mechanics of fracture and of contact. Annexes to Volume I give the relevant basic tools and techniques of continuous-media mechanics, crystallography and phase changes. Most of the chapters end with a set of exercises, to many of which either the full solution or hints on how to obtain this are given; each volume is profusely illustrated with explanatory diagrams and with electron-microscope photographs. Mechanics of Material Behaviour grew out of the Paris Diplome d'tudes Approfondies (DEA, Advanced Studies Diploma) in Mechanics and Materials. In addition to Diploma-level students, it is addressed to students reading for a first degree in engineering, practising engineers and research workers in this field.
Download or read book IUTAM Symposium on Discretization Methods in Structural Mechanics written by H.A. Mang and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: The JUT AMlIACM Symposium on Discretization Methods in Structural Mechanics was nd th held in Vienna, Austria, from 2 to 6 June 1997. The site of the Symposium was the "Theatersaal" of the Austrian Academy of Sciences. The Symposium was attended by 71 persons from 23 countries. In addition, several Austrian graduate students and research associates participated in the meeting. In the 5-day Symposium a total of 48 papers were presented. All of them were invited and accorded equal weight in the programme. The following topics were covered: • Error-controlled adaptivity of finite element methods • Large deformations and buckling, including inelastic deformations • Inelastic brittle or ductile localization, phase transition and system failure, resulting from monotonic, cyclic or impact loading • Sensitivity analysis and inverse problems with special emphasis on identification of material parameters • Development of linear and nonlinear finite element methods for thin-walled structures and composites • Implicit integration schemes for nonlinear dynamics • Coupling of rigid and deformable structures; fluid-structures and acoustic-structure interaction • Competitive numerical methods (finite element methods, boundary element methods, coupling ofthese two methods) • Identification of material and structural data. Comments on details of the treatment of these topics are contained in the Concluding Remarks. The Editors would like to express their appreciation to E. Stein who has prepared these Concluding Remarks.
Download or read book Vibration Control of Active Structures written by A. Preumont and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: I was introduced to structural control by Raphael Haftka and Bill Hallauer during a one year stay at the Aerospace and Ocean Engineering department of Virginia Tech., during the academic year 1985-1986. At that time, there was a tremendous interest in large space structures in the USA, mainly because of the Strategic Defense Initiative and the space station program. Most of the work was theoretical or numerical, but Bill Hallauer was one of the few experimen talists trying to implement control systems which worked on actual structures. When I returned to Belgium, I was appointed at the chair of Mechanical Engi neering and Robotics at ULB, and I decided to start some basic vibration control experiments on my own. A little later, smart materials became widely available and offered completely new possibilities, particularly for precision structures, but also brought new difficulties due to the strong coupling in their constitutive equations, which requires a complete reformulation of the classical modelling techniques such as finite elements. We started in this new field with the sup port of the national and regional governments, the European Space Agency, and some bilateral collaborations with European aerospace companies. Our Active Structures Laboratory was inaugurated in October 1995.
Download or read book IUTAM Symposium on Dynamics of Slender Vortices written by Egon Krause and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: The decision of the General Assembly of the International Union of Theoretical and Applied Mechanics to organize a Symposium on Dynamics of Slender Vortices was greeted with great enthusiasm. The acceptance of the proposal, forwarded by the Deutsches Komitee fiir Mechanik (DEKOMECH) signalized, that there was a need for discussing the topic chosen in the frame the IUTAM Symposia offer. Also the location of the symposium was suitably chosen: It was decided to hold the symposium at the RWTH Aachen, where, years ago, Theodore von Karman had worked on problems related to those to be discussed now anew. It was clear from the beginning of the planning, that the symposium could only be held in the von Karman-Auditorium ofthe Rheinisch-Westfalische Technische Hochschule Aachen, a building named after him. The symposium was jointly organized by the editors of this volume, strongly supported by the local organizing committee. The invitations of the scientific committee brought together scientists actively engaged in research on the dynamics of slender vortices. It was the aim of the committee to have the state of the art summarized and also to have the latest results of specific problems investigated communicated to the participants of the symposium. The topics chosen were asymptotic theories, numerical methods, vor tices in shear layers, interaction of vortices, vortex breakdown, vortex sound, and aircraft and helicopter vortices.
Download or read book IUTAM Symposium on Statistical Energy Analysis written by F.J. Fahy and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is a record of the proceedings of the Symposium on Statistical Energy Analysis (SEA) held at the University of Southampton in July 1997 which was held under the auspices of the International Union of Theoretical and Applied Mechanic~. Theoretical SEA is form of modelling the vibrational and acoustical behaviour of complex mechanical systems which has undergone a long period of gestation before recent maturation into a widely used engineering design and analysis tool which is supported by a rapidly growing supply of commercial software. SEA also provides a framework for associated experimental measurement procedures, data analysis and interpretation. Under the guidance of the members of a distinguished International Scientific Committee, participants were individually invited from the broad spectrum of 'SEAfarers', including academics, consultants, industrial engineers, software developers and research students. The Symposium aimed to reflect the balance of world-wide activity in SEA, although some eminent members of the SEA community were, sadly, unable to attend. In particular, Professor Richard Lyon and Dr Gideon Maidanik, two of the principal originators of SEA, were sorely missed. This publication contains copies of all the papers presented to the Symposium together with a summary of the associated discussions which contains valuable comments upon the contents of the formal papers together with the views of participants on some fundamental issues which remain to be resolved.
Download or read book Fluid Flow Phenomena written by Paolo Orlandi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the simulation of the incompressible Navier-Stokes equations for laminar and turbulent flows. The book is limited to explaining and employing the finite difference method. It furnishes a large number of source codes which permit to play with the Navier-Stokes equations and to understand the complex physics related to fluid mechanics. Numerical simulations are useful tools to understand the complexity of the flows, which often is difficult to derive from laboratory experiments. This book, then, can be very useful to scholars doing laboratory experiments, since they often do not have extra time to study the large variety of numerical methods; furthermore they cannot spend more time in transferring one of the methods into a computer language. By means of numerical simulations, for example, insights into the vorticity field can be obtained which are difficult to obtain by measurements. This book can be used by graduate as well as undergraduate students while reading books on theoretical fluid mechanics; it teaches how to simulate the dynamics of flow fields on personal computers. This will provide a better way of understanding the theory. Two chapters on Large Eddy Simulations have been included, since this is a methodology that in the near future will allow more universal turbulence models for practical applications. The direct simulation of the Navier-Stokes equations (DNS) is simple by finite-differences, that are satisfactory to reproduce the dynamics of turbulent flows. A large part of the book is devoted to the study of homogeneous and wall turbulent flows. In the second chapter the elementary concept of finite difference is given to solve parabolic and elliptical partial differential equations. In successive chapters the 1D, 2D, and 3D Navier-Stokes equations are solved in Cartesian and cylindrical coordinates. Finally, Large Eddy Simulations are performed to check the importance of the subgrid scale models. Results for turbulent and laminar flows are discussed, with particular emphasis on vortex dynamics. This volume will be of interest to graduate students and researchers wanting to compare experiments and numerical simulations, and to workers in the mechanical and aeronautic industries.
Download or read book Asymptotic Modelling of Fluid Flow Phenomena written by Radyadour Kh. Zeytounian and published by Springer Science & Business Media. This book was released on 2006-04-10 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: for the fluctuations around the means but rather fluctuations, and appearing in the following incompressible system of equations: on any wall; at initial time, and are assumed known. This contribution arose from discussion with J. P. Guiraud on attempts to push forward our last co-signed paper (1986) and the main idea is to put a stochastic structure on fluctuations and to identify the large eddies with a part of the probability space. The Reynolds stresses are derived from a kind of Monte-Carlo process on equations for fluctuations. Those are themselves modelled against a technique, using the Guiraud and Zeytounian (1986). The scheme consists in a set of like equations, considered as random, because they mimic the large eddy fluctuations. The Reynolds stresses are got from stochastic averaging over a family of their solutions. Asymptotics underlies the scheme, but in a rather loose hidden way. We explain this in relation with homogenizati- localization processes (described within the §3. 4 ofChapter 3). Ofcourse the mathematical well posedness of the scheme is not known and the numerics would be formidable! Whether this attempt will inspire researchers in the field of highly complex turbulent flows is not foreseeable and we have hope that the idea will prove useful.
Download or read book IUTAM Symposium on Analytical and Computational Fracture Mechanics of Non Homogeneous Materials written by Bhushan L. Karihaloo and published by Springer Science & Business Media. This book was released on 2002-04-30 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the Proceedings of the IUTAM Symposium on "Analytical and Computational Fracture Mechanics of Non-homogeneous Materials", held in Cardiff from 18th to 22nd June 2001. The Symposium was convened to address and place on record topical issues in analytical and computational aspects of the fracture of non-homogeneous materials as they are approached by specialists in mechanics, materials science and related fields. The expertise represented in the Symposium was accordingly very wide, and many of the world's greatest authorities in their respective fields participated. Given the extensive range and scale of non-homogeneous materials, it had to be focussed to enhance the quality and impact of the Symposium. The range of non-homogeneous materials was limited to those that are inhomogeneous at the macroscopic level and/or exhibit strain softening. The issues of micro to macro scaling were not excluded even within this restricted range which covered materials such as rock, concrete, ceramics and composites on the one hand, and, on the other, those metallic materials whose ductile fracture is strongly influenced by the presence of inhomogeneities. The Symposium remained focussed on fundamental research issues of practical significance. These issues have many common features among seemingly disparate non-homogeneous materials.
