Download or read book IUTAM Symposium on Anisotropy Inhomogeneity and Nonlinearity in Solid Mechanics written by David F. Parker and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the IUTAM-ISIMM Symposium, held in Nottingham, U.K., 30 August--3 September 1994

Download or read book Nonlinear and Stochastic Dynamics of Compliant Offshore Structures written by Seon Mi Han and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this monograph is to show how a compliant offshore structure in an ocean environment can be modeled in two and three di mensions. The monograph is divided into five parts. Chapter 1 provides the engineering motivation for this work, that is, offshore structures. These are very complex structures used for a variety of applications. It is possible to use beam models to initially study their dynamics. Chapter 2 is a review of variational methods, and thus includes the topics: princi ple of virtual work, D'Alembert's principle, Lagrange's equation, Hamil ton's principle, and the extended Hamilton's principle. These methods are used to derive the equations of motion throughout this monograph. Chapter 3 is a review of existing transverse beam models. They are the Euler-Bernoulli, Rayleigh, shear and Timoshenko models. The equa tions of motion are derived and solved analytically using the extended Hamilton's principle, as outlined in Chapter 2. For engineering purposes, the natural frequencies of the beam models are presented graphically as functions of normalized wave number and geometrical and physical pa rameters. Beam models are useful as representations of complex struc tures. In Chapter 4, a fluid force that is representative of those that act on offshore structures is formulated. The environmental load due to ocean current and random waves is obtained using Morison's equa tion. The random waves are formulated using the Pierson-Moskowitz spectrum with the Airy linear wave theory.

Download or read book IUTAM Symposium on Evolutionary Methods in Mechanics written by Tadeusz Burczynski and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the IUTAM Symposium held in Cracow, Poland, 24-27 September 2002

Download or read book IUTAM Symposium on Mechanical Waves for Composite Structures Characterization written by Dimitrios A. Sotiropoulos and published by Springer Science & Business Media. This book was released on 2005-12-09 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of selected reviewed papers that were presented at the International Union of Theoretical and Applied Mechanics Symposium "Mechanical waves for composite structures characterization". The Symposium took place June 14-17, 2000 in Chania, Crete, Greece. As is customary, IUTAM Symposia Proceedings are published in the series "Solid Mechanics and Its Applications" by Kluwer Academic Publishers. I am indebted to Professor G. M. L. Gladwell who is the series editor. I would also like to take this opportunity to express my sincere gratitude to Professor M. A. Hayes the Secretary General of the International Union of Theoretical and Applied Mechanics and a member ofthe Symposium's Scientific Committee. His constant encouragement and support made the Symposium not only possible but also successful. To the success also contributed all the members of the Symposium's Scientific Committee which I had the honor to chair. I express my appreciation to each one of them who are: Professor J. D. Achenbach (Northwestern University, Evanston, Illinois, USA), Professor M. A. Hayes (University College, Dublin, Ireland), Professor K. J. Langenberg (University of Kassel, Germany), Professor A. K. Mal (University of California, Los Angeles, USA), Professor X. Markenscoff (University of California, San Diego, USA), Professor S. Nair (Illinois Institute of Technology, Chicago, USA), Professor R. W. Ogden (University of Glasgow, UK), Professor G.

Download or read book IUTAM Symposium on Mechanical Behavior and Micro Mechanics of Nanostructured Materials written by Y.L. Bai and published by Springer Science & Business Media. This book was released on 2007-04-05 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the IUTAM Symposium on Mechanical Behavior and Micro-mechanics of Nanostructured Materials, held in Beijing on June 27-30, 2005. The proceedings consist of approximately 30 presentations. Nano-scale, micro-scale, theoretical, experimental and numerical aspects of the subjects are covered. A wide scope of research and progress are displayed. This is the first work in print on this particular subject.

Download or read book IUTAM Symposium on Mechanical and Electromagnetic Waves in Structured Media written by Ross C. McPhedran and published by Springer Science & Business Media. This book was released on 2001-07-31 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IUTAM Symposium on Mechanical and Electromagnetic Waves in Structured Media took place at the University of Sydney from January 18- 22, 1999. It brought together leading researchers from eleven countries for a week-long meeting, with the aim of providing cross-links between the com- nities studying related problems involving elastic and electromagnetic waves in structured materials. After the meeting, participants were invited to submit articles based on their presentations, which were refereed and assembled to constitute these Proceedings. The topics covered here represent areas at the forefront of research intoelastic and electromagnetic waves. They include effect of nonlinearity, diffusion and multiple scattering on waves, as well as asymptotic and numerical techniques. Composite materials are discussed in depth, with example systems ranging fromdusty plasmas to a magneto-elastic microstructured system. Also included are studies of homogenisation, that field which seeks to determine equivalent homogeneous systems which can give equivalent wave properties to structured materials, and inverse problems, in which waves are used as a probe to infer structural details concerning scattering systems. There are also strong groups of papers on the localization of waves by random systems, and photonic and phononic band gap materials. These are being developed by analogue with semiconductors for electrons, and hold out the promise of enabling designers to control the propagation of waves through materials in novel ways. We would like to thank the other members of the Scientific Committee (A.

Download or read book IUTAM Symposium on Scaling Laws in Ice Mechanics and Ice Dynamics written by J.P. Dempsey and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Volume constitutes the Proceedings of the IUTAM Symposium on 'Scaling Laws in Ice Mechanics and Ice Dynamics', held in Fairbanks, Alaska from 13th to 16th of June 2000. Ice mechanics deals with essentially intact ice: in this discipline, descriptions of the motion and deformation of Arctic/ Antarctic and river/lake ice call for the development of physically based constitutive and fracture models over an enormous range in scale: 0.01 m - 10 km. Ice dynamics, on the other hand, deals with the movement of broken ice: descriptions of an aggregate of ice floes call for accurate modeling of momentum transfer through the sea/ice system, again over an enormous range in scale: 1 km (floe scale) - 500 km (basin scale). For ice mechanics, the emphasis on lab-scale (0.01 - 0.5 m) research con trasts with applications at the scale of order 1 km (ice-structure interaction, icebreaking); many important upscaling questions remain to be explored.

Download or read book IUTAM Symposium on Asymptotics Singularities and Homogenisation in Problems of Mechanics written by A.B. Movchan and published by Springer Science & Business Media. This book was released on 2004-02-29 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the IUTAM Symposium held in Liverpool, UK, 8-11 July 2002

Download or read book IUTAM Symposium on Mechanics and Reliability of Actuating Materials written by W. Yang and published by Springer Science & Business Media. This book was released on 2006-06-28 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Actuating materials hold a promise for fast-spreading applications in smart structures and active control systems, and have attracted extensive attention from scientists of both mechanics and materials sciences communities. High performance and stability of actuating materials and structures play a decisive role in their successive applications as sensors and actuators in structural control and robotics. The advances of actuating materials, however, recently encountered a severe reliability issue. For a better understanding toward this issue, scientific efforts are of paramount significance to gain a deep insight into the intricate deformation and failure behaviors of actuating materials. To examine the state of the art in this subject, the general assembly of IUTAM approved in August, 2002 at Cambridge University, UK, a proposal to hold an IUTAM symposium to summarize the relevant research findings. The main themes of the symposium are: (i) the constitutive relations of actuating materials that couple mechanical, electrical, thermal and magnetic properties, as well as incorporate phase transformation and domain switch; (ii) the physical mechanisms of deformation, damage, and fatigue crack growth of actuating materials; (iii) the development of failure-resilient approaches that base on the macro-, meso-, and micro-mechanics analyses; (iv) the investigation of microstructural evolution, stability of phase transformation, and size effects of ferroelectric ceramics, shape memory alloys, actuating polymers, and bio-actuating materials. The above problems represent an exciting challenge and form a research thrust of both materials science and solid mechanics. The IUTAM Symposium (GA.

Download or read book Nonlinear Dynamics and Chaotic Phenomena written by B.K Shivamoggi and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: FolJowing the formulation of the laws of mechanics by Newton, Lagrange sought to clarify and emphasize their geometrical character. Poincare and Liapunov successfuIJy developed analytical mechanics further along these lines. In this approach, one represents the evolution of all possible states (positions and momenta) by the flow in phase space, or more efficiently, by mappings on manifolds with a symplectic geometry, and tries to understand qualitative features of this problem, rather than solving it explicitly. One important outcome of this line of inquiry is the discovery that vastly different physical systems can actually be abstracted to a few universal forms, like Mandelbrot's fractal and Smale's horse-shoe map, even though the underlying processes are not completely understood. This, of course, implies that much of the observed diversity is only apparent and arises from different ways of looking at the same system. Thus, modern nonlinear dynamics 1 is very much akin to classical thermodynamics in that the ideas and results appear to be applicable to vastly different physical systems. Chaos theory, which occupies a central place in modem nonlinear dynamics, refers to a deterministic development with chaotic outcome. Computers have contributed considerably to progress in chaos theory via impressive complex graphics. However, this approach lacks organization and therefore does not afford complete insight into the underlying complex dynamical behavior. This dynamical behavior mandates concepts and methods from such areas of mathematics and physics as nonlinear differential equations, bifurcation theory, Hamiltonian dynamics, number theory, topology, fractals, and others.

Download or read book Nonlinear Crack Models for Nonmetallic Materials written by Alberto Carpinteri and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this volume a survey of the most relevant nonlinear crack models is provided, with the purpose of analyzing the nonlinear mechanical effects occurring at the tip of macrocracks in quasi-brittle materials - such as concrete, rocks, ceramics, polymers, high-strength metallic alloys - and in brittle-matrix fibre-reinforced composites. Such local effects, as, for example, plastic deformation, yielding, strain-hardening, strain-softening, mechanical damage, matrix microcracking, aggregate debonding, fibre bridging, fibre slippage, crazing, and so on, are properly described through different simplified models, representing the peculiarities of the phenomena involved. The models are introduced and described separately and then compared in the last part of the book. This volume will be of interest to students, professionals and researchers in the field of nonlinear fracture mechanics.

Download or read book Waves and Nonlinear Processes in Hydrodynamics written by John Grue and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: In December 1994 Professor Enok Palm celebrated his 70th birthday and retired after more than forty years of service at the University of Oslo. In view of his outstanding achievements as teacher and scientist a symposium entitled "Waves and Nonlinear Processes in Hydrodynamics" was held in his honour from the 17th to the 19th November 1994 in the locations of The Norwegian Academy of Science and Letters in Oslo. The topics of the symposium were chosen to cover Enok's broad range of scientific work, interests and accomplishments: Marine hydrodynamics, nonlinear wave theory, nonlinear stability, thermal convection and geophys ical fluid dynamics, starting with Enok's present activity, ending with the field where he began his career. This order was followed in the symposium program. The symposium had two opening lectures. The first looked back on the history of hydrodynamic research at the University of Oslo. The second focused on applications of hydrodynamics in the offshore industry today.

Download or read book IUTAM Symposium on Mesoscopic Dynamics of Fracture Process and Materials Strength written by H. Kitagawa and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers presented at the IUT AM Symposium of "Mesoscopic Dynamics of Fracture Process and Materials Strength", held in July 2003, at the Hotel Osaka Sun Palace, Osaka, Japan. The Symposium was proposed in 2001, aiming at organizing concentrated discussions on current understanding of fracture process and inhomogeneous deformation governing the materials strength with emphasis on the mesoscopic dynamics associated with evolutional mechanical behaviour under micro/macro mutual interaction. The decision of the General Assembly of International Union of Theoretical and Applied Mechanics (IUT AM) to accept our proposal was well-timed and attracted attention. Driven by the development of new theoretical and computational techniques, various novel challenges to investigate the mesoscopic dynamics have been actively done recently, including large-scaled 3D atomistic simulations, discrete dislocation dynamics and other micro/mesoscopic computational analyses. The Symposium attracted sixty-six participants from eight countries, and forty two papers were presented. The presentations comprised a wide variety of fundamental subjects of physics, mechanical models, computational strategies as well as engineering applications. Among the subjects, discussed are (a) dislocation patterning, (b) crystal plasticity, (c) characteristic fracture of amorphous/nanocrystal, (d) nano-indentation, (e) ductile-brittle transition, (f) ab-initio calculation, (g) computational methodology for multi-scale analysis and others.

Download or read book IUTAM Symposium on Chaotic Dynamics and Control of Systems and Processes in Mechanics written by Giuseppe Rega and published by Springer Science & Business Media. This book was released on 2006-06-22 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interest of the applied mechanics community in chaotic dynamics of engineering systems has exploded in the last fifteen years, although research activity on nonlinear dynamical problems in mechanics started well before the end of the Eighties. It developed first within the general context of the classical theory of nonlinear oscillations, or nonlinear vibrations, and of the relevant engineering applications. This was an extremely fertile field in terms of formulation of mechanical and mathematical models, of development of powerful analytical techniques, and of understanding of a number of basic nonlinear phenomena. At about the same time, meaningful theoretical results highlighting new solution methods and new or complex phenomena in the dynamics of deterministic systems were obtained within dynamical systems theory by means of sophisticated geometrical and computational techniques. In recent years, careful experimental studies have been made to establish the actual occurrence and observability of the predicted dynamic phenomena, as it is vitally needed in all engineering fields. Complex dynamics have been shown to characterize the behaviour of a great number of nonlinear mechanical systems, ranging from aerospace engineering applications to naval applications, mechanical engineering, structural engineering, robotics and biomechanics, and other areas. The International Union of Theoretical and Applied Mechanics grasped the importance of such complex phenomena in the Eighties, when the first IUTAM Symposium devoted to the general topic of nonlinear and chaotic dynamics in applied mechanics and engineering was held in Stuttgart (1989).

Download or read book IUTAM Symposium on Elastohydrodynamics and Micro elastohydrodynamics written by R.W. Snidle and published by Springer Science & Business Media. This book was released on 2006-10-03 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the IUTAM Symposium on Elastohydrodynamics and Microelastohydrodynamics held in Cardiff from 1-3 September 2004. It contains 31 articles by leading researchers in the field. The symposium focused on theoretical, experimental and computational issues in elastohydrodynamic lubrication (EHL) both in relation to smooth surfaces and in situations where the film is of the same order or thinner than the surface roughness (micro-EHL). The last IUTAM Symposium in this general area of contact of deformable bodies was in 1974. The emphasis in the Symposium was upon fundamental issues such as: solution methods; lubricant rheological models, thermal effects; both low and high elastic modulus situations; human and replacement joints; fluid traction; dynamic effects, asperity lubrication and the failure of lubrication; surface fatigue and thermal distress under EHL conditions. The book will be useful to those active in basic elastohydrodynamics research who wish to gain an up-to-date understanding of the subject from leading experts in the field.

Download or read book IUTAM Symposium on Segregation in Granular Flows written by Anthony D. Rosato and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Segregation is a pervasive phenomenon whereby a flowing granular mass consisting of particles with diverse physical properties becomes spatially inhomogeneous. In the industrial sector that deals with the handling and processing of bulk solids, this non-uniformity is highly undesirable since blend homogeneity is generally a stringent requirement of most products. In the arena of geophysical flows, segregation can enhance the destructive capabilities of natural events such as avalanches and landslides. During the last 15 years, these issues have provided motivation and fostered collaborations between the communities of mathematicians, engineers, industrial researchers, and physicists to develop predictive models of segregation by integrating the perspectives and approaches of each. The collection of unique papers brings to light many of the perplexing scientific and technical issues in our current understanding of this complex phenomenon. It addresses advances in experiment, computational modeling and theory. This volume is one of the very few books devoted entirely to problems of segregation of particulate solids.

Download or read book IUTAM Symposium on Smart Structures and Structronic Systems written by Ulrich Gabbert and published by Springer Science & Business Media. This book was released on 2001-06-30 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the IUTAM Symposium on Smart Structures and Structronic Systems, held in Magdeburg, Germany, 26-29 September 2000