Download or read book IUTAM Symposium on Analytical and Computational Fracture Mechanics of Non Homogeneous Materials written by B.L. Karihaloo and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the Proceedings of the IUTAM Symposium on "Analytical and Computational Fracture Mechanics of Non-homogeneous Materials", held in Cardiff from 18th to 22nd June 2001. The Symposium was convened to address and place on record topical issues in analytical and computational aspects of the fracture of non-homogeneous materials as they are approached by specialists in mechanics, materials science and related fields. The expertise represented in the Symposium was accordingly very wide, and many of the world's greatest authorities in their respective fields participated. Given the extensive range and scale of non-homogeneous materials, it had to be focussed to enhance the quality and impact of the Symposium. The range of non-homogeneous materials was limited to those that are inhomogeneous at the macroscopic level and/or exhibit strain softening. The issues of micro to macro scaling were not excluded even within this restricted range which covered materials such as rock, concrete, ceramics and composites on the one hand, and, on the other, those metallic materials whose ductile fracture is strongly influenced by the presence of inhomogeneities. The Symposium remained focussed on fundamental research issues of practical significance. These issues have many common features among seemingly disparate non-homogeneous materials.
Download or read book Fracture Mechanics written by E.E. Gdoutos and published by Springer Science & Business Media. This book was released on 2005-07-25 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: New developments in the applications of fracture mechanics to engineering problems have taken place in the last years. Composite materials have extensively been used in engineering problems. Quasi-brittle materials including concrete, cement pastes, rock, soil, etc. all benefit from these developments. Layered materials and especially thin film/substrate systems are becoming important in small volume systems used in micro and nanoelectromechancial systems (MEMS and NEMS). Nanostructured materials are being introduced in our every day life. In all these problems fracture mechanics plays a major role for the prediction of failure and safe design of materials and structures. These new challenges motivated the author to proceed with the second edition of the book. The second edition of the book contains four new chapters in addition to the ten chapters of the first edition. The fourteen chapters of the book cover the basic principles and traditional applications, as well as the latest developments of fracture mechanics as applied to problems of composite materials, thin films, nanoindentation and cementitious materials. Thus the book provides an introductory coverage of the traditional and contemporary applications of fracture mechanics in problems of utmost technological importance. With the addition of the four new chapters the book presents a comprehensive treatment of fracture mechanics. It includes the basic principles and traditional applications as well as the new frontiers of research of fracture mechanics during the last three decades in topics of contemporary importance, like composites, thin films, nanoindentation and cementitious materials. The book contains fifty example problems and more than two hundred unsolved problems. A "Solutions Manual" is available upon request for course instructors from the author.
Download or read book Fracture Mechanics written by Huy Duong Bui and published by Springer Science & Business Media. This book was released on 2007-01-03 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents, in a unified manner, a variety of topics in Continuum and Fracture Mechanics: energy methods, conservation laws, mathematical methods to solve two-dimensional and three-dimensional crack problems. Moreover, a series of new subjects is presented in a straightforward manner, accessible to under-graduate students. Emphasizing physical or experimental back-grounds, then analysis and theoretical results, this monograph is intended for use by students and researchers in solid mechanics, mechanical engineering and applied mathematics.
Download or read book Soil Stress Strain Behavior Measurement Modeling and Analysis written by Hoe I. Ling and published by Springer Science & Business Media. This book was released on 2007-11-28 with total page 989 pages. Available in PDF, EPUB and Kindle. Book excerpt: The material in this work is focused on recent developments in research into the stress-strain behavior of geomaterials, with an emphasis on laboratory measurements, soil constitutive modeling and behavior of soil structures (such as reinforced soils, piles and slopes). The latest advancements in the field, such as the rate effect and dynamic behavior of both clay and sand, behavior of modified soils and soil mixtures, and soil liquefaction are addressed.
Download or read book IUTAM Symposium on Scaling in Solid Mechanics written by F. M. Borodich and published by Springer Science & Business Media. This book was released on 2008-11-14 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the Proceedings of the IUTAM Symposium on ‘Scaling in Solid Mechanics’, held in Cardiff from 25th to 29th June 2007. The Symposium was convened to address and place on record topical issues in theoretical, experimental and computational aspects of scaling approaches to solid mechanics and related elds. Scaling is a rapidly expanding area of research having multidisciplinary - plications. The expertise represented in the Symposium was accordingly very wide, and many of the world’s greatest authorities in their respective elds participated. Scaling methods apply wherever there is similarity across many scales or one need to bridge different scales, e. g. the nanoscale and macroscale. The emphasis in the Symposium was upon fundamental issues such as: mathematical foundations of scaling methods based on transformations and connections between multi-scale approaches and transformations. The Symposium remained focussed on fundam- tal research issues of practical signi cance. The considered topics included damage accumulation, growth of fatigue cracks, development of patterns of aws in earth’s core and inice, abrasiveness of rough surfaces, and soon. The Symposium consisted of forty-two oral presentations. All of the lectures were invited. Full record of the programme appears as an Appendix. Several of the lectures are not represented, mainly because of prior commitments to publish elsewhere. The proceedings p- vide a reasonable picture of understanding as it exists at present. The Symposium showed that scaling methods cannot be reduced solely to dimensional analysis and fractal approaches.
Download or read book Reanalysis of Structures written by Uri Kirsch and published by Springer Science & Business Media. This book was released on 2008-02-24 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with various computational procedures for multiple repeated analyses (reanalysis) of structures, and presents them in a unified approach. It meets the need for a general text covering the basic concepts and methods as well as recent developments in this area. To clarify the presentation, many illustrative examples and numerical results are demonstrated. Previous books on structural analysis do not cover most of the material presented here.
Download or read book Symbolic Modeling of Multibody Systems written by J-C. Samin and published by Springer Science & Business Media. This book was released on 2003-11-30 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling and analysing multibody systems require a comprehensive understanding of the kinematics and dynamics of rigid bodies. In this volume, the relevant fundamental principles are first reviewed in detail and illustrated in conformity with the multibody formalisms that follow. Whatever the kind of system (tree-like structures, closed-loop mechanisms, systems containing flexible beams or involving tire/ground contact, wheel/rail contact, etc), these multibody formalisms have a common feature in the proposed approach, viz, the symbolic generation of most of the ingredients needed to set up the model. The symbolic approach chosen, specially dedicated to multibody systems, affords various advantages: it leads to a simplification of the theoretical formulation of models, a considerable reduction in the size of generated equations and hence in resulting computing time, and also enhanced portability of the multibody models towards other specific environments. Moreover, the generation of multibody models as symbolic toolboxes proves to be an excellent pedagogical medium in teaching mechanics.
Download or read book Functional Analysis written by Leonid P. Lebedev and published by Springer Science & Business Media. This book was released on 2006-04-29 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book started its life as a series of lectures given by the second author from the 1970’s onwards to students in their third and fourth years in the Department of Mechanics and Mathematics at Rostov State University. For these lectures there was also an audience of engineers and applied mechanicists who wished to understand the functional analysis used in contemporary research in their fields. These people were not so much interested in functional analysis itself as in its applications; they did not want to be told about functional analysis in its most abstract form, but wanted a guided tour through those parts of the analysis needed for their applications. The lecture notes evolved over the years as the first author started to make more formal typewritten versions incorporating new material. About 1990 the first author prepared an English version and submitted it to Kluwer Academic Publishers for inclusion in the series Solid Mechanics and its Applications. At that state the notes were divided into three long chapters covering linear and nonlinear analysis. As Series Editor, the third author started to edit them. The requirements of lecture notes and books are vastly different. A book has to be complete (in some sense), self contained, and able to be read without the help of an instructor.
Download or read book Elasticity written by J.R. Barber and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first edition of this book was published, there have been major improve- TM TM ments in symbolic mathematical languages such as Maple and Mathematica and this has opened up the possibility of solving considerably more complex and hence interesting and realistic elasticity problems as classroomexamples. It also enables the student to focus on the formulation of the problem (e. g. the appropriate governing equations and boundary conditions) rather than on the algebraic manipulations, with a consequent improvement in insight into the subject and in motivation. During the past 10 years I have developed files in Maple and Mathematica to facilitate this p- cess, notably electronic versions of the Tables in the present Chapters 19 and 20 and of the recurrence relations for generating spherical harmonics. One purpose of this new edition is to make this electronic material available to the reader through the Kluwer website www. elasticity. org. I hope that readers will make use of this resource and report back to me any aspects of the electronic material that could benefit from improvement or extension. Some hints about the use of this material are contained in Appendix A. Those who have never used Maple or Mathematica will find that it takes only a few hours of trial and error to learn how to write programs to solve boundary value problems in elasticity.
Download or read book Mathematical Modelling of Waves in Multi Scale Structured Media written by Alexander B. Movchan and published by CRC Press. This book was released on 2017-11-09 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical Modelling of Waves in Multi-Scale Structured Media presents novel analytical and numerical models of waves in structured elastic media, with emphasis on the asymptotic analysis of phenomena such as dynamic anisotropy, localisation, filtering and polarisation as well as on the modelling of photonic, phononic, and platonic crystals.
Download or read book Computational Earthquake Physics Simulations Analysis and Infrastructure Part I written by Xiang-chu Yin and published by Springer Science & Business Media. This book was released on 2007-12-03 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of a two-part work, this volume focuses on microscopic simulation, scaling physics, dynamic rapture and wave propagation, earthquake generation, cycle and seismic pattern. Topics covered range from numerical and theoretical studies of crack propagation, developments in finite difference methods for modeling faults, long time scale simulation of interacting fault systems, and modeling of crustal deformation through to mantle convection.
Download or read book Elasticity of Transversely Isotropic Materials written by Haojiang Ding and published by Springer Science & Business Media. This book was released on 2006-07-09 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to provide a comprehensive introduction to the theory and applications of the mechanics of transversely isotropic elastic materials. There are many reasons why it should be written. First, the theory of transversely isotropic elastic materials is an important branch of applied mathematics and engineering science; but because of the difficulties caused by anisotropy, the mathematical treatments and descriptions of individual problems have been scattered throughout the technical literature. This often hinders further development and applications. Hence, a text that can present the theory and solution methodology uniformly is necessary. Secondly, with the rapid development of modern technologies, the theory of transversely isotropic elasticity has become increasingly important. In addition to the fields with which the theory has traditionally been associated, such as civil engineering and materials engineering, many emerging technologies have demanded the development of transversely isotropic elasticity. Some immediate examples are thin film technology, piezoelectric technology, functionally gradient materials technology and those involving transversely isotropic and layered microstructures, such as multi-layer systems and tribology mechanics of magnetic recording devices. Thus a unified mathematical treatment and presentation of solution methods for a wide range of mechanics models are of primary importance to both technological and economic progress.
Download or read book Plate and Panel Structures of Isotropic Composite and Piezoelectric Materials Including Sandwich Construction written by Jack R. Vinson and published by Springer Science & Business Media. This book was released on 2005-02-08 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plates and panels are primary components in many structures including space vehicles, aircraft, automobiles, buildings, bridge decks, ships and submarines. The ability to design, analyse, optimise and select the proper materials for these structures is a necessity for structural designers, analysts and researchers. This text consists of four parts. The first deals with plates of isotropic (metallic and polymeric) materials. The second involves composite material plates, including anisotropy and laminate considerations. The third section treats sandwich constructions of various types, and the final section gives an introduction to plates involving piezoelectric materials, in which the "smart" or "intelligent" materials are used as actuators or sensors. In each section, the formulations encompass plate structures subjected to static loads, dynamic loads, buckling, thermal/moisture environments, and minimum weight structural optimisation. This is a textbook for a graduate course, an undergraduate senior course and a reference. Many homework problems are given in various chapters.
Download or read book Dynamics of Advanced Materials and Smart Structures written by Kazumi Watanabe and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two key words for mechanical engineering in the future are Micro and Intelligence. It is weIl known that the leadership in the intelligence technology is a marter of vital importance for the future status of industrial society, and thus national research projects for intelligent materials, structures and machines have started not only in advanced countries, but also in developing countries. Materials and structures which have self-sensing, diagnosis and actuating systems, are called intelligent or smart, and are of growing research interest in the world. In this situation, the IUT AM symposium on Dynamics 0/ Advanced Materials and Smart Structures was a timely one. Smart materials and structures are those equipped with sensors and actuators to achieve their designed performance in achanging environment. They have complex structural properties and mechanical responses. Many engineering problems, such as interface and edge phenomena, mechanical and electro-magnetic interaction/coupling and sensing, actuating and control techniques, arise in the development ofintelligent structures. Due to the multi-disciplinary nature ofthese problems, all ofthe classical sciences and technologies, such as applied mathematics, material science, solid and fluid mechanics, control techniques and others must be assembled and used to solve them. IUTAM weIl understands the importance ofthis emerging technology. An IUTAM symposium on Smart Structures and Structronic Systems (Chaired by U.
Download or read book Mechanics of Microelectronics written by G.Q. Zhang and published by Springer Science & Business Media. This book was released on 2006-08-25 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written by leading experts with both profound knowledge and rich practical experience in advanced mechanics and the microelectronics industry essential for current and future development. It aims to provide the cutting edge knowledge and solutions for various mechanical related problems, in a systematic way. It contains important and detailed information about the state-of-the-art theories, methodologies, the way of working and real case studies.
Download or read book Models of Mechanics written by A. Klarbring and published by Springer Science & Business Media. This book was released on 2006-09-05 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook on models and modeling in mechanics introduces a new unifying approach to applied mechanics: through the concept of the open scheme, a step-by-step approach to modeling evolves. The unifying approach enables a very large scope on relatively few pages: the book treats theories of mass points and rigid bodies, continuum models of solids and fluids, as well as traditional engineering mechanics of beams, cables, pipe flow and wave propagation.
Download or read book Proceedings of Crack Paths CP 2009 Vicenza Italy 2009 written by and published by Gruppo Italiano Frattura. This book was released on with total page 1129 pages. Available in PDF, EPUB and Kindle. Book excerpt:
