Download or read book Issues in Materials and Manufacturing Research 2013 Edition written by and published by ScholarlyEditions. This book was released on 2013-05-01 with total page 1234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Materials and Manufacturing Research: 2013 Edition is a ScholarlyEditions™ book that delivers timely, authoritative, and comprehensive information about Additional Research. The editors have built Issues in Materials and Manufacturing Research: 2013 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Additional Research in this book to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Materials and Manufacturing Research: 2013 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Issues in Materials and Manufacturing Research 2012 Edition written by and published by ScholarlyEditions. This book was released on 2013-01-10 with total page 1446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Materials and Manufacturing Research: 2012 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Molecular Modeling. The editors have built Issues in Materials and Manufacturing Research: 2012 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Molecular Modeling in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Materials and Manufacturing Research: 2012 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Issues in Materials and Manufacturing Research 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 11119 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Materials and Manufacturing Research: 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Materials and Manufacturing Research. The editors have built Issues in Materials and Manufacturing Research: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Materials and Manufacturing Research in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Materials and Manufacturing Research: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Issues in Metal Research 2013 Edition written by and published by ScholarlyEditions. This book was released on 2013-05-01 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Metal Research / 2013 Edition is a ScholarlyEditions™ book that delivers timely, authoritative, and comprehensive information about Cast Metals Research. The editors have built Issues in Metal Research: 2013 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Cast Metals Research in this book to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Metal Research / 2013 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Advanced Materials and Manufacturing Processes written by Amar Patnaik and published by CRC Press. This book was released on 2021-10-14 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses advanced materials and manufacturing processes with insights and overviews on tribology, automation, mechanical, biomedical, and aerospace engineering, as well as the optimization of industrial applications. The book explores the different types of composite materials while reporting on the design considerations and applications of each. Offering an overview of futuristic research areas, the book examines various engineering optimization and multi-criteria decision-making techniques and introduces a specific control framework used in analyzing processes. The book includes problem analyses and solving skills and covers different types of composite materials, their design considerations, and applications. This book is an informational resource for advanced undergraduate and graduate students, researchers, scholars, and field professionals, providing an update on the current advancements in the field of manufacturing processes.
Download or read book Additive Manufacturing Materials Processes Quantifications and Applications written by Jing Zhang and published by Butterworth-Heinemann. This book was released on 2018-05-17 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing: Materials, Processes, Quantifications and Applications is designed to explain the engineering aspects and physical principles of available AM technologies and their most relevant applications. It begins with a review of the recent developments in this technology and then progresses to a discussion of the criteria needed to successfully select an AM technology for the embodiment of a particular design, discussing material compatibility, interfaces issues and strength requirements. The book concludes with a review of the applications in various industries, including bio, energy, aerospace and electronics. This book will be a must read for those interested in a practical, comprehensive introduction to additive manufacturing, an area with tremendous potential for producing high-value, complex, individually customized parts. As 3D printing technology advances, both in hardware and software, together with reduced materials cost and complexity of creating 3D printed items, these applications are quickly expanding into the mass market. Includes a discussion of the historical development and physical principles of current AM technologies Exposes readers to the engineering principles for evaluating and quantifying AM technologies Explores the uses of Additive Manufacturing in various industries, most notably aerospace, medical, energy and electronics
Download or read book Materials Research for Manufacturing written by Lynnette D Madsen and published by Springer. This book was released on 2018-03-30 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about applied materials research in industry. It presents various important topics and challenges and gives guidance to materials researchers who move to industry. The book focuses on the materials manufacturing issues for industrial application. It deals with developments and challenges in traditional materials areas, such as metals and ceramics, and new opportunities that have risen from nanotechnology and additive manufacturing. The chapters, written by senior people from large companies, include successful manufacturing undertakings, several distinct and unresolved manufacturing challenges, with the focus on approaches, timelines and the skills needed for future company research and development. The book provides a cross-section of current and future approaches valuable for new employees and academics working in industry.
Download or read book Sustainable Business Concepts Methodologies Tools and Applications written by Management Association, Information Resources and published by IGI Global. This book was released on 2019-08-02 with total page 1962 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the increasingly competitive corporate sector, businesses must examine their current practices to ensure business success. By examining their social, financial, and environmental risks, obligations, and opportunities, businesses can re-design their operations more effectively to ensure prosperity. Sustainable Business: Concepts, Methodologies, Tools, and Applications is a vital reference source that explores the best practices that promote business sustainability, including examining how economic, social, and environmental aspects are related to each other in the company’s management and performance. Highlighting a range of topics such as lean manufacturing, sustainable business model innovation, and ethical consumerism, this multi-volume book is ideally designed for entrepreneurs, business executives, business professionals, managers, and academics seeking current research on sustainable business practices.
Download or read book Materials and Manufacturing Capabilities for Sustaining Defense Systems written by National Research Council and published by National Academies Press. This book was released on 2013-04-29 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Standing Committee on Defense Materials Manufacturing and Infrastructure (DMMI) conducted a workshop on July 23-24, 2012, to share information and gather perspectives on issues concerning Materials and Manufacturing Capabilities for Sustaining Defense Systems. This workshop, held at the headquarters building of the National Academies, 2101 Constitution Avenue N.W., Washington D.C., was conducted according to the procedures of the National Research Council (NRC) for a convening activity. That is, all workshop participants-including presenters, members of the DMMI standing committee, Reliance 21, invited guests, and visitors-spoke as individuals, and no overall findings, conclusions, or recommendations were developed during or as a result of the workshop. All statements and views summarized in this publication are attributable only to those individuals who expressed them. It is worth noting that the sponsor, Reliance 21, is a Department of Defense group of professionals that was established to enable the DOD science and technology (S&T) community to work together to enhance Defense S&T programs, eliminate unwarranted duplication, and strengthen cooperation among the military services and other DOD agencies. The DMMI standing committee named a workshop planning group to develop the workshop agenda and decide on invited guests and presenters, in accordance with the statement of task approved by the Governing Board of the NRC. The planning group also consulted with the Reliance 21 materials and processing community of interest. The presentations and discussions during the workshop are summarized sequentially in the main part of this report. As an aid to readers, nine themes have been identified by the author that recurred in multiple presentations and discussions. Materials and Manufacturing Capabilities for Sustaining Defense Systems: Summary of a Workshop explains these nine themes and summarizes the two day workshop.
Download or read book Limited Affordable Low volume Manufacturing written by Maureen Mellody and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Limited Affordable Low-Volume Manufacturing is the summary of a workshop convened by the National Materials and Manufacturing Board of the National Research Council in August 2013 to discuss affordable, low-volume manufacturing. The workshop focused on four critical issues relevant to manufacturing: low-volume manufacturing; use of commercial off-the-shelf equipment; short production runs; and commercial manufacturing services. The workshop discussion also considered variable-rate manufacturing and high-mix manufacturing, both aspects of low-volume manufacturing. This report examines the characteristics of low-volume manufacturing and considers future advances in limited affordable low-volume manufacturing in the United States.
Download or read book Publications Combined Over 100 Studies In Nanotechnology With Medical Military And Industrial Applications 2008 2017 written by and published by Jeffrey Frank Jones. This book was released on with total page 7322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 7,300 total pages ... Just a sample of the contents: Title : Multifunctional Nanotechnology Research Descriptive Note : Technical Report,01 Jan 2015,31 Jan 2016 Title : Preparation of Solvent-Dispersible Graphene and its Application to Nanocomposites Descriptive Note : Technical Report Title : Improvements To Micro Contact Performance And Reliability Descriptive Note : Technical Report Title : Delivery of Nanotethered Therapies to Brain Metastases of Primary Breast Cancer Using a Cellular Trojan Horse Descriptive Note : Technical Report,15 Sep 2013,14 Sep 2016 Title : Nanotechnology-Based Detection of Novel microRNAs for Early Diagnosis of Prostate Cancer Descriptive Note : Technical Report,15 Jul 2016,14 Jul 2017 Title : A Federal Vision for Future Computing: A Nanotechnology-Inspired Grand Challenge Descriptive Note : Technical Report Title : Quantifying Nanoparticle Release from Nanotechnology: Scientific Operating Procedure Series: SOP C 3 Descriptive Note : Technical Report Title : Synthesis, Characterization And Modeling Of Functionally Graded Multifunctional Hybrid Composites For Extreme Environments Descriptive Note : Technical Report,15 Sep 2009,14 Mar 2015 Title : Equilibrium Structures and Absorption Spectra for SixOy Molecular Clusters using Density Functional Theory Descriptive Note : Technical Report Title : Nanotechnology for the Solid Waste Reduction of Military Food Packaging Descriptive Note : Technical Report,01 Apr 2008,01 Jan 2015 Title : Magneto-Electric Conversion of Optical Energy to Electricity Descriptive Note : Final performance rept. 1 Apr 2012-31 Mar 2015 Title : Surface Area Analysis Using the Brunauer-Emmett-Teller (BET) Method: Standard Operating Procedure Series: SOP-C Descriptive Note : Technical Report,30 Sep 2015,30 Sep 2016 Title : Stabilizing Protein Effects on the Pressure Sensitivity of Fluorescent Gold Nanoclusters Descriptive Note : Technical Report Title : Theory-Guided Innovation of Noncarbon Two-Dimensional Nanomaterials Descriptive Note : Technical Report,14 Feb 2012,14 Feb 2016 Title : Deterring Emergent Technologies Descriptive Note : Journal Article Title : The Human Domain and the Future of Army Warfare: Present as Prelude to 2050 Descriptive Note : Technical Report Title : Drone Swarms Descriptive Note : Technical Report,06 Jul 2016,25 May 2017 Title : OFFSETTING TOMORROW'S ADVERSARY IN A CONTESTED ENVIRONMENT: DEFENDING EXPEDITIONARY ADVANCE BASES IN 2025 AND BEYOND Descriptive Note : Technical Report Title : A Self Sustaining Solar-Bio-Nano Based Wastewater Treatment System for Forward Operating Bases Descriptive Note : Technical Report,01 Feb 2012,31 Aug 2017 Title : Radiation Hard and Self Healing Substrate Agnostic Nanocrystalline ZnO Thin Film Electronics Descriptive Note : Technical Report,26 Sep 2011,25 Sep 2015 Title : Modeling and Experiments with Carbon Nanotubes for Applications in High Performance Circuits Descriptive Note : Technical Report Title : Radiation Hard and Self Healing Substrate Agnostic Nanocrystalline ZnO Thin Film Electronics (Per5 E) Descriptive Note : Technical Report,01 Oct 2011,28 Jun 2017 Title : High Thermal Conductivity Carbon Nanomaterials for Improved Thermal Management in Armament Composites Descriptive Note : Technical Report Title : Emerging Science and Technology Trends: 2017-2047 Descriptive Note : Technical Report Title : Catalysts for Lightweight Solar Fuels Generation Descriptive Note : Technical Report,01 Feb 2013,31 Jan 2017 Title : Integrated Real-Time Control and Imaging System for Microbiorobotics and Nanobiostructures Descriptive Note : Technical Report,01 Aug 2013,31 Jul 2014
Download or read book Research on Material Engineering and Manufacturing Engineering written by International Conference on Material Engineering and Manufacturing Engineering and published by . This book was released on 2014-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2013 International Conference on Material Engineering and Manufacturing Engineering (ICMEME 2013), November 24-25, 2013, Hunan, China
Download or read book Emerging Applications of 3D Printing During CoVID 19 Pandemic written by Kamalpreet Sandhu and published by Springer Nature. This book was released on 2021-07-29 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents various practical breakthroughs of 3D printing (3DP) technologies in developing different types of tool and gadgets to be used against COVID-19 pandemic. It presents multidisciplinary aspects of 3DP technology in social, medical, administration, and scientific areas. This book presents state-of-the-art applications of 3DP technology in the development of PPE, ventilators, respiratory equipments, and customized drugs. It provides a comprehensive collection of the technical notes, research designs, literature prospective, and clinical applications of 3DP technologies to effectively deal with the COVID-19 pandemic. This book will be beneficial for the medical professionals, pharmacists, manufacturing enterprises, and young scholars in understanding the real potential of 3DP technologies in aiding humans-based activities against the COVID-19 crisis. Having interdisciplinary applications in applied science, this book will also be useful for wide range of academicians, research scholars and industry stakeholders.
Download or read book Applied Mechanics Behavior of Materials and Engineering Systems written by Taoufik Boukharouba and published by Springer. This book was released on 2016-08-31 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a variety of topics in mechanics, with a special emphasis on material mechanics. It reports on fracture mechanics, fatigue of materials, stress-strain behaviours, as well as transferability problems and constraint effects in fracture mechanics. It covers different kind of materials, from metallic materials such as ferritic and austenitic steels, to composites, concrete, polymers and nanomaterials. Additional topics include heat transfer, quality control and reliability of structures and components. Furthermore, the book gives particular attention to new welding technologies such as STIR welding and spray metal coating, and to novel methods for quality control, such as Taguchi design, fault diagnosis and wavelet analysis. Based on the 2015 edition of the Algerian Congress of Mechanics (Congrès Algérien de Mécanique, CAM), the book also covers energetics, in terms of simulation of turbulent reactive flow, behaviour of supersonic jet, turbulent combustion, fire induced smoke layer, and heat and mass transfer, as well as important concepts related to human reliability and safety of components and structures. All in all, the book represents a complete, practice-oriented reference guide for both academic and professionals in the field of mechanics.
Download or read book Production at the leading edge of technology written by Jens Peter Wulfsberg and published by Springer Nature. This book was released on 2019-11-23 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of the Congress will be leading-edge manufacturing processes. Topics include manufacturing at extreme speed, size, accuracy, methodology, use of resources, interdisciplinarity and more. Contributions from production and industrial engineering are welcome. Challenges from the areas of manufacturing, machines and production systems will be addressed. Production research constantly pushes the boundaries of what is feasible. The Congress "Production at the leading edge of technology" will highlight production processes that are advancing into areas that until recently were considered unfeasible, also in terms of methodology, use of resources and interdisciplinarity. But where does the search for new limits lead? Which limitations do we still have to overcome, which ones do we not want to overcome? The aim of the German-speaking colloquium is to establish connections between the research locations and to intensify the overall transfer of results and experience with industrial users.
Download or read book Materials Research for Manufacturing written by Lynnette D Madsen and published by Springer. This book was released on 2016-01-14 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about applied materials research in industry. It presents various important topics and challenges and gives guidance to materials researchers who move to industry. The book focuses on the materials manufacturing issues for industrial application. It deals with developments and challenges in traditional materials areas, such as metals and ceramics, and new opportunities that have risen from nanotechnology and additive manufacturing. The chapters, written by senior people from large companies, include successful manufacturing undertakings, several distinct and unresolved manufacturing challenges, with the focus on approaches, timelines and the skills needed for future company research and development. The book provides a cross-section of current and future approaches valuable for new employees and academics working in industry.
Download or read book Challenges for Technology Innovation An Agenda for the Future written by Fernando Moreira da Silva and published by CRC Press. This book was released on 2017-04-21 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world is undergoing a profound transformation, driven by radical technological changes and an accelerated globalisation process. A new culture of greater resource efficiency and disruptive innovation will require new technologies, processes and materials, fostering new knowledge, innovation, education and a digital society, bringing forward new business opportunities and novel solutions to major societal challenges. Challenges for Technology Innovation: an Agenda for the Future is the result of the 1st International Conference on Sustainable Smart Manufacturing – S2M, held at the Faculty of Architecture in Lisbon, Portugal, on October 20-22, 2016. It contains innovative contributions in the field of Sustainable Smart Manufacturing and related topics, making a significant contribution to further development of these fields. This volume covers a wide range of topics including Design and Digital Manufacturing, Design Education, Eco Design and Innovation, Future Cities, Medicine 4.0, Smart Manufacturing, Sustainable Business Models, Sustainable Construction, Sustainable Design and Technology and Sustainable Recycling.