Download or read book Isotopic Tailoring with Sup 59 Ni to Study the Effect of Helium on Microstructural Evolution and Mechanical Properties of Neutron irradiated Fe Cr Ni Alloys written by and published by . This book was released on 1992 with total page 29 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tensile testing on three model Fe-Cr-Ni alloys removed from four discharges of the 59Ni isotopic doping experiment in FFTF-MOTA indicates that helium/dpa ratios typical of fusion reactors do not produce changes in the yield strength or elongation that are significantly different from those at much lower helium generation rates. It also appears that tensile properties approach a saturation level that is dependent only on the final irradiation temperature, but not prior temperature history or thermomechanical starting condition. The saturation in mechanical properties reflects a similar saturation in microstructure that is independent of starting condition. The successful conduct of an isotopic doping experiment was found to require post-irradiation measurement of the helium levels in order to compensate for uncertainties in the cross sections for burn-out and burn-in of 59Ni and for uncertainties in neutron flux and spectra in the vicinity of the edge of the core.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1993 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government Reports Annual Index written by and published by . This book was released on 1993 with total page 1452 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fusion Energy Update written by and published by . This book was released on 1980 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1990 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metals Abstracts Index written by and published by . This book was released on 1995 with total page 1390 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ISOTOPIC TAILORING WITH SUP 59 Ni TO STUDY THE INFLUENCE OF HELIUM written by F.A. GARNER and published by . This book was released on 1989 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nickel and Its Alloys written by Samuel Jacob Rosenberg and published by . This book was released on 1968 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Magnetic Fusion Technology written by Thomas J. Dolan and published by Springer Science & Business Media. This book was released on 2014-02-10 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic Fusion Technology describes the technologies that are required for successful development of nuclear fusion power plants using strong magnetic fields. These technologies include: • magnet systems, • plasma heating systems, • control systems, • energy conversion systems, • advanced materials development, • vacuum systems, • cryogenic systems, • plasma diagnostics, • safety systems, and • power plant design studies. Magnetic Fusion Technology will be useful to students and to specialists working in energy research.
Download or read book Stress corrosion Cracking written by Russell H. Jones and published by ASM International(OH). This book was released on 1992 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Details the many conditions under which stress-corrosion cracking (SCC) can occur, the parameters which control SCC, and the methodologies for mitigating and testing for SCC, plus information on mechanisms of SCC with experimental data on a variety of materials. Contains information about environmen
Download or read book High chromium Ferritic and Martensitic Steels for Nuclear Applications written by R. L. Klueh and published by ASTM International. This book was released on 2001-01-01 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph reviews the development of high-chromium ferritic/martensitic steels for exposure to the high-energy neutron environment of a fission or fusion reactor, and considers their potential use as a component material. The basic properties of the steels under non-nuclear conditions are provi
Download or read book Fundamental Aspects of Inert Gases in Solids written by S.E. Donnelly and published by Springer. This book was released on 2013-12-20 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: The NATO Advanced Research Workshop on Fundamental Aspects of Inert Gases in Solids, held at Bonas, France from 16-22 September 1990, was the fifth in a series of meetings that have been held in this topic area since 1979. The Consultants' Meeting in that year at Harwell on Rare Gas Behaviour in Metals and Ionic Solids was followed in 1982 by the Jiilich Inter national Symposium on Fundamental Aspects of Helium in Metals. Two smaller meetings have followed-a CECAM organised workshop on Helium Bubbles in Metals was held at Orsay, France in 1986 while in February 1989, a Topical Symposium on Noble Gases in Metals was held in Las Vegas as part of the large TMS/AIME Spring Meeting. As is well known, the dominating feature of inert gas atoms in most solids is their high heat of solution, leading in most situations to an essentially zero solubility and gas-atom precipita tion. In organising the workshop, one particular aim was to target the researchers in the field of inert-gas/solid interactions from three different areas--namely metals, tritides and nuclear fuels-in order to encourage and foster the cross-fertilisation of approaches and ideas. In these three material classes, the behaviour of inert gases in metals has probably been most studied, partly from technological considerations-the effects of helium production via (n, a) reac tions during neutron irradiation are of importance, particularly in a fusion reactor environ ment-and partly from a more fundamental viewpoint.
Download or read book Ac Au Au Zr written by B. Predel and published by Springer. This book was released on 1991-12-10 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: For everyone concerned with the technology and application of metals and alloys and with the development of new metallic materials, a detailed knowledge of phase equilibria is indispensable. Also, information on the thermodynamical and crystallographical data of the systems under investigation is essential, and often metastable crystalline phases as well as quasicrystalline or amorphous alloys are of interest. Vol. IV/5 therefore presents all these data. Because of the large amount available of experimental evidence and thermochemical calculations, a presentation in one volume, as it was realized several decades ago in the widely used book of M. Hansen "Aufbau der Zweistoff-Legierungen" proved to be impossible. So volume IV/5 had to be divided into several subvolumes which cover - in alphabetical order - all binary systems of importance. Subvolume IV/5a, the first of the series, deals with the systems Ac-Au ... Au-Zr. Further subvolumes will follow shortly.
Download or read book Introduction to the Theory of Thermal Neutron Scattering written by G. L. Squires and published by Cambridge University Press. This book was released on 2012-03-29 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: A long-awaited reprint of the book that has established itself as the classic textbook on neutron scattering. It will be an invaluable introductory text for students taking courses on neutron scattering, as well as for researchers and those who would like to deepen their knowledge on the subject through self-study.
Download or read book Hydrogen in Intermetallic Compounds II written by Louis Schlapbach and published by Springer Science & Business Media. This book was released on 2006-01-21 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of hydrogen in an on metals and alloys is important in a number ofdisciplines including solid-state physics, materials science, physical chemistry, and energy technology. This volume treats the dynamics of hydrogen in intermetallic compounds, surface properties, kinetics, and applications of metal hydrides in energy technology. In addition, selected experimental methods are described. The introductory chapter will enable non-specialists to gain an overall picture of the field and to appreciate the relevant scientific issue. The companion volume, Hydrogene in Intermetallic Compounds I, was published as Vol. 63 of Topics in Applied Physics.
Download or read book Nuclear Waste Conditioning written by France. Commissariat à l'énergie atomique (CEA) and published by Le Moniteur Editions. This book was released on 2009 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
