Download or read book Intelligent Transport Systems Standards written by Bob Williams and published by Artech House. This book was released on 2008 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: To list, summarize, and categorize intelligent transportation standards (ITS). Reviews best practices and provides listings for standards developing organizations at national and international levels. Provides guidance as to where to look in the furute to find relevant standards for ITS. Presents strategies for integrating standards in IRS planning, deployment, and operation.

Download or read book The Certified Software Quality Engineer Handbook written by Linda Westfall and published by Quality Press. This book was released on 2016-09-23 with total page 1050 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook contains information and guidance that supports all of the topics of the 2016 version of the CSQE Body of Knowledge (BoK) upon which ASQ's Certified Software Quality Engineer/(CSQE) exam is based. Armed with the knowledge presented in this handbook to complement the required years of actual work experience, qualified software quality practitioners may feel confident they have taken appropriate steps in preparation for the ASQ CSQE exam. However, the goals for this handbook go well beyond it being a CSQE exam preparation guide. Its author designed this handbook not only to help the software quality engineers, but as a resource for software development practitioners, project managers, organizational managers, other quality practitioners, and other professionals who need to understand the aspects of software quality that impact their work. It can also be used to benchmark their (or their organization's) understanding and application of software quality principles and practices against what is considered a cross-industry good practice baseline. After all, taking stock of strengths and weaknesses, software engineers can develop proactive strategies to leverage software quality as a competitive advantage. New software quality engineers can use this handbook to gain an understanding of their chosen profession. Experienced software quality engineers can use this handbook as a reference source when performing their daily work. It is also hoped that trainers and educators will use this handbook to help propagate software quality engineering knowledge to future software practitioners and managers. Finally, this handbook strives to establish a common vocabulary that software quality engineers, and others in their organizations can use to communicate about software and quality. Thus increasing the professionalism of the industry and eliminating the wastes that can result from ambiguity and misunderstandings.

Download or read book Software Project Management written by Moh’d A. Radaideh and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-12-18 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book INCOSE Systems Engineering Handbook written by INCOSE and published by John Wiley & Sons. This book was released on 2015-06-12 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: A detailed and thorough reference on the discipline and practice of systems engineering The objective of the International Council on Systems Engineering (INCOSE) Systems Engineering Handbook is to describe key process activities performed by systems engineers and other engineering professionals throughout the life cycle of a system. The book covers a wide range of fundamental system concepts that broaden the thinking of the systems engineering practitioner, such as system thinking, system science, life cycle management, specialty engineering, system of systems, and agile and iterative methods. This book also defines the discipline and practice of systems engineering for students and practicing professionals alike, providing an authoritative reference that is acknowledged worldwide. The latest edition of the INCOSE Systems Engineering Handbook: Is consistent with ISO/IEC/IEEE 15288:2015 Systems and software engineering—System life cycle processes and the Guide to the Systems Engineering Body of Knowledge (SEBoK) Has been updated to include the latest concepts of the INCOSE working groups Is the body of knowledge for the INCOSE Certification Process This book is ideal for any engineering professional who has an interest in or needs to apply systems engineering practices. This includes the experienced systems engineer who needs a convenient reference, a product engineer or engineer in another discipline who needs to perform systems engineering, a new systems engineer, or anyone interested in learning more about systems engineering.

Download or read book Metrology and Theory of Measurement written by Valery A. Slaev and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-12-02 with total page 713 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metrology is the science of measurements. As such, it deals with the problem of obtaining knowledge of physical reality through its quantifiable properties. The problems of measurement and of measurement accuracy are central to all natural and technical sciences. Now in its second edition, this monograph conveys the fundamental theory of measurement and provides some algorithms for result testing and validation.

Download or read book Handbook of Safety Principles written by Niklas Möller and published by John Wiley & Sons. This book was released on 2018-01-04 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents recent breakthroughs in the theory, methods, and applications of safety and risk analysis for safety engineers, risk analysts, and policy makers Safety principles are paramount to addressing structured handling of safety concerns in all technological systems. This handbook captures and discusses the multitude of safety principles in a practical and applicable manner. It is organized by five overarching categories of safety principles: Safety Reserves; Information and Control; Demonstrability; Optimization; and Organizational Principles and Practices. With a focus on the structured treatment of a large number of safety principles relevant to all related fields, each chapter defines the principle in question and discusses its application as well as how it relates to other principles and terms. This treatment includes the history, the underlying theory, and the limitations and criticism of the principle. Several chapters also problematize and critically discuss the very concept of a safety principle. The book treats issues such as: What are safety principles and what roles do they have? What kinds of safety principles are there? When, if ever, should rules and principles be disobeyed? How do safety principles relate to the law; what is the status of principles in different domains? The book also features: • Insights from leading international experts on safety and reliability • Real-world applications and case studies including systems usability, verification and validation, human reliability, and safety barriers • Different taxonomies for how safety principles are categorized • Breakthroughs in safety and risk science that can significantly change, improve, and inform important practical decisions • A structured treatment of safety principles relevant to numerous disciplines and application areas in industry and other sectors of society • Comprehensive and practical coverage of the multitude of safety principles including maintenance optimization, substitution, safety automation, risk communication, precautionary approaches, non-quantitative safety analysis, safety culture, and many others The Handbook of Safety Principles is an ideal reference and resource for professionals engaged in risk and safety analysis and research. This book is also appropriate as a graduate and PhD-level textbook for courses in risk and safety analysis, reliability, safety engineering, and risk management offered within mathematics, operations research, and engineering departments. NIKLAS MÖLLER, PhD, is Associate Professor at the Royal Institute of Technology in Sweden. The author of approximately 20 international journal articles, Dr. Möller's research interests include the philosophy of risk, metaethics, philosophy of science, and epistemology. SVEN OVE HANSSON, PhD, is Professor of Philosophy at the Royal Institute of Technology. He has authored over 300 articles in international journals and is a member of the Royal Swedish Academy of Engineering Sciences. Dr. Hansson is also a Topical Editor for the Wiley Encyclopedia of Operations Research and Management Science. JAN-ERIK HOLMBERG, PhD, is Senior Consultant at Risk Pilot AB and Adjunct Professor of Probabilistic Riskand Safety Analysis at the Royal Institute of Technology. Dr. Holmberg received his PhD in Applied Mathematics from Helsinki University of Technology in 1997. CARL ROLLENHAGEN, PhD, is Adjunct Professor of Risk and Safety at the Royal Institute of Technology. Dr. Rollenhagen has performed extensive research in the field of human factors and MTO (Man, Technology, and Organization) with a specific emphasis on safety culture and climate, event investigation methods, and organizational safety assessment.

Download or read book Software Quality Assurance written by Claude Y. Laporte and published by John Wiley & Sons. This book was released on 2018-01-04 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces Software Quality Assurance (SQA) and provides an overview of standards used to implement SQA. It defines ways to assess the effectiveness of how one approaches software quality across key industry sectors such as telecommunications, transport, defense, and aerospace. Includes supplementary website with an instructor’s guide and solutions Applies IEEE software standards as well as the Capability Maturity Model Integration for Development (CMMI) Illustrates the application of software quality assurance practices through the use of practical examples, quotes from experts, and tips from the authors

Download or read book Risk Assessment and Risk Driven Quality Assurance written by Jürgen Großmann and published by Springer. This book was released on 2017-04-21 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed conference proceedings of the Fourth International Workshop on Risk Assessment and Risk-Driven Quality Assurance, RISK 2016, held in conjunction with ICTSS 2016, in Graz, Austria, in October 2016. The revised 9 full papers were carefully reviewed and selected from 11 submissions. They focus on research studying, developing and evaluating innovative techniques, tools, languages and methods risk assessment and risk-driven quality engineering. The papers are organized topical sections: security risk management; security risk analysis; risk-based testing.

Download or read book Effective Standardization Management in Corporate Settings written by Jakobs, Kai and published by IGI Global. This book was released on 2015-12-02 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of standards to optimize the interoperability of systems has become commonplace in the business world. Though once believed to limit innovation, it has been shown that standardization promotes organizational growth. Through defining norms for given technologies, managers open themselves to new opportunities and developments. Effective Standardization Management in Corporate Settings is a pivotal reference source that assesses the link between standards and efficiency in the business world. This innovative publication addresses the economic importance, global impacts, effective tools, and strategies employable across all levels of an organization. Ideal for managers, business owners, business students, and IT professionals, this progressive book highlights the best practices and procedures to bring standardization to the forefront of the contemporary business model.

Download or read book Managing Risk written by Jonathan Armstrong and published by Routledge. This book was released on 2013-05-13 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Managing Risk: Technology and Communications is a practical guide to the effective management of technology and communications risks. Frequent high profile scares, like the Sasser worm and WiFi vulnerabilities, make a proactive approach essential and this book shows you how to put in place expedient checks, balances and countermeasures. Business networks are threatened by a host of factors, from employee abuse to non-compliance with data protection and libel laws, from hacker attacks to viruses and from extortion and terrorism to natural disaster. The costs of failing to manage systems risks can be immense and go beyond simple loss of productivity or even fraudulent losses to brand damage, theft of business secrets, expensive litigation, diminished customer confidence and adverse impacts on personnel and share value. This practical handbook includes examples, checklists and case studies to help you manage such hazards. The book covers: • accessibility of information; • acceptable use of information; • directors’ legal duties; • general legal compliance; • protecting networks from external and internal threats; • encouraging security awareness at management and employee level; • reputational risk management; and • national and international risk and security standards. Managing Risk: Technology and Communications is the indispensable work of reference for IT and technology managers, HR managers, IT legal advisors, company secretaries and anyone seeking practical guidance on technology risks and their management.

Download or read book Systems Engineering and Its Application to Industrial Product Development written by Eugenio Brusa and published by Springer. This book was released on 2017-12-21 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mastering the complexity of innovative systems is a challenging aspect of design and product development. Only a systematic approach can help to embed an increasing degree of smartness in devices and machines, allowing them to adapt to variable conditions or harsh environments. At the same time, customer needs have to be identified before they can be translated into consistent technical requirements. The field of Systems Engineering provides a method, a process, suitable tools and languages to cope with the complexity of various systems such as motor vehicles, robots, railways systems, aircraft and spacecraft, smart manufacturing systems, microsystems, and bio-inspired devices. It makes it possible to trace the entire product lifecycle, by ensuring that requirements are matched to system functions, and functions are matched to components and subsystems, down to the level of assembled parts. This book discusses how Systems Engineering can be suitably deployed and how its benefits are currently being exploited by Product Lifecycle Management. It investigates the fundamentals of Model Based Systems Engineering (MBSE) through a general introduction to this topic and provides two examples of real systems, helping readers understand how these tools are used. The first, which involves the mechatronics of industrial systems, serves to reinforce the main content of the book, while the second describes an industrial implementation of the MBSE tools in the context of developing the on-board systems of a commercial aircraft.

Download or read book Embedded Software Development for Safety Critical Systems Second Edition written by Chris Hobbs and published by CRC Press. This book was released on 2019-08-16 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a book about the development of dependable, embedded software. It is for systems designers, implementers, and verifiers who are experienced in general embedded software development, but who are now facing the prospect of delivering a software-based system for a safety-critical application. It is aimed at those creating a product that must satisfy one or more of the international standards relating to safety-critical applications, including IEC 61508, ISO 26262, EN 50128, EN 50657, IEC 62304, or related standards. Of the first edition, Stephen Thomas, PE, Founder and Editor of FunctionalSafetyEngineer.com said, "I highly recommend Mr. Hobbs' book."

Download or read book Project Management Concepts Methodologies Tools and Applications written by Management Association, Information Resources and published by IGI Global. This book was released on 2016-06-09 with total page 2453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organizations of all types are consistently working on new initiatives, product lines, or implementation of new workflows as a way to remain competitive in the modern business environment. No matter the type of project at hand, employing the best methods for effective execution and timely completion of the task at hand is essential to project success. Project Management: Concepts, Methodologies, Tools, and Applications presents the latest research and practical solutions for managing every stage of the project lifecycle. Emphasizing emerging concepts, real-world examples, and authoritative research on managing project workflows and measuring project success in both private and public sectors, this multi-volume reference work is a critical addition to academic, government, and corporate libraries. It is designed for use by project coordinators and managers, business executives, researchers, and graduate-level students interested in putting research-based solutions into practice for effective project management.

Download or read book Software Engineering written by Kassem A. Saleh and published by J. Ross Publishing. This book was released on 2009 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the software engineering fundamentals, principles and skills needed to develop and maintain high quality software products. It covers requirements specification, design, implementation, testing and management of software projects. It is aligned with the SWEBOK, Software Engineering Undergraduate Curriculum Guidelines and ACM Joint Task Force Curricula on Computing.

Download or read book Software Process Improvement written by Rory O'Connor and published by Springer Science & Business Media. This book was released on 2009-08-21 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is intended for SPI (software process improvement) managers and - searchers, quality managers, and experienced project and research managers. The papers constitute the research proceedings of the 16th EuroSPI (European Software Process Improvement, www.eurospi.net) conference held in Alcala (Madrid region), September 2–4, 2009, Spain. Conferences have been held since 1994 in Dublin, 1995 in Vienna (Austria), 1997 in Budapest (Hungary), 1998 in Gothenburg (Sweden), 1999 in Pori (Finland), 2000 in Copenhagen (Denmark), 2001 in Limerick (Ireland), 2002 in Nuremberg (G- many), 2003 in Graz (Austria), 2004 in Trondheim (Norway), 2005 in Budapest (Hungary), 2006 in Joensuu (Finland), 2007 in Potsdam (Germany), 2008 in Dublin (Ireland), and 2009 in Alcala (Spain). EuroSPI established an experience library (library.eurospi.net) which will be conti- ously extended over the next few years and will be made available to all attendees. EuroSPI also created an umbrella initiative for establishing a European Qualification Network in which different SPINs and national initiatives join mutually beneficial collaborations (ECQA – European Certification and Qualification Association, www.ecqa.org). With a general assembly during October 15–16, 2007 through Euro-SPI partners and networks, in collaboration with the European Union (supported by the EU L- nardo da Vinci Programme) a European certification association has been created (www.eu-certificates.org, www.ecqa.org) for the IT and services sector to offer SPI knowledge and certificates to industry, establishing close knowledge transfer links between research and industry.

Download or read book Advanced Mathematical And Computational Tools In Metrology And Testing Viii written by Franco Pavese and published by World Scientific. This book was released on 2009-04-15 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main theme of the AMCTM 2008 conference, reinforced by the establishment of IMEKO TC21, was to provide a central opportunity for the metrology and testing community worldwide to engage with applied mathematicians, statisticians and software engineers working in the relevant fields.This review volume consists of reviewed papers prepared on the basis of the oral and poster presentations of the Conference participants. It covers all the general matters of advanced statistical modeling (e.g. uncertainty evaluation, experimental design, optimization, data analysis and applications, multiple measurands, correlation, etc.), metrology software (e.g. engineering aspects, requirements or specification, risk assessment, software development, software examination, software tools for data analysis, visualization, experiment control, best practice, standards, etc.), numerical methods (e.g. numerical data analysis, numerical simulations, inverse problems, uncertainty evaluation of numerical algorithms, applications, etc.), and data fusion techniques and design and analysis of inter-laboratory comparisons.

Download or read book Advanced Mathematical Computational Tools in Metrology Testing VIII written by Franco Pavese and published by World Scientific. This book was released on 2009 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main theme of the AMCTM 2008 conference, reinforced by the establishment of IMEKO TC21, was to provide a central opportunity for the metrology and testing community worldwide to engage with applied mathematicians, statisticians and software engineers working in the relevant fields. This review volume consists of reviewed papers prepared on the basis of the oral and poster presentations of the Conference participants. It covers all the general matters of advanced statistical modeling (e.g. uncertainty evaluation, experimental design, optimization, data analysis and applications, multiple measurands, correlation, etc.), metrology software (e.g. engineering aspects, requirements or specification, risk assessment, software development, software examination, software tools for data analysis, visualization, experiment control, best practice, standards, etc.), numerical methods (e.g. numerical data analysis, numerical simulations, inverse problems, uncertainty evaluation of numerical algorithms, applications, etc.), and data fusion techniques and design and analysis of inter-laboratory comparisons.