Download or read book Guide to ASTM Test Methods for the Analysis of Petroleum Products and Lubricants written by and published by ASTM International. This book was released on with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Corrosion Control in the Oil and Gas Industry written by Sankara Papavinasam and published by Elsevier. This book was released on 2013-10-15 with total page 1021 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effect of corrosion in the oil industry leads to the failure of parts. This failure results in shutting down the plant to clean the facility. The annual cost of corrosion to the oil and gas industry in the United States alone is estimated at $27 billion (According to NACE International)—leading some to estimate the global annual cost to the oil and gas industry as exceeding $60 billion. In addition, corrosion commonly causes serious environmental problems, such as spills and releases. An essential resource for all those who are involved in the corrosion management of oil and gas infrastructure, Corrosion Control in the Oil and Gas Industry provides engineers and designers with the tools and methods to design and implement comprehensive corrosion-management programs for oil and gas infrastructures. The book addresses all segments of the industry, including production, transmission, storage, refining and distribution. - Selects cost-effective methods to control corrosion - Quantitatively measures and estimates corrosion rates - Treats oil and gas infrastructures as systems in order to avoid the impacts that changes to one segment if a corrosion management program may have on others - Provides a gateway to more than 1,000 industry best practices and international standards

Download or read book Handbook of Bioenergy Crop Plants written by Chittaranjan Kole and published by CRC Press. This book was released on 2012-03-22 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the world’s population is projected to reach 10 billion or more by 2100, devastating fossil fuel shortages loom in the future unless more renewable alternatives to energy are developed. Bioenergy, in the form of cellulosic biomass, starch, sugar, and oils from crop plants, has emerged as one of the cheaper, cleaner, and environmentally sustainable alternatives to traditional forms of energy. Handbook of Bioenergy Crop Plants brings together the work of a panel of global experts who survey the possibilities and challenges involved in biofuel production in the twenty-first century. Section One explores the genetic improvement of bioenergy crops, ecological issues and biodiversity, feedstock logistics and enzymatic cell wall degradation to produce biofuels, and process technologies of liquid transportation fuels production. It also reviews international standards for fuel quality, unique issues of biofuel-powered engines, life-cycle environmental impacts of biofuels compared with fossil fuels, and social concerns. Section Two examines commercialized bioenergy crops, including cassava, Jatropha, forest trees, maize, oil palm, oilseed Brassicas, sorghum, soybean, sugarcane, and switchgrass. Section Three profiles emerging crops such as Brachypodium, diesel trees, minor oilseeds, lower plants, Paulownia, shrub willow, sugarbeet, sunflower, and sweet potato. It also discusses unconventional biomass resources such as vegetable oils, organic waste, and municipal sludge. Highlighting the special requirements, major achievements, and unresolved concerns in bioenergy production from crop plants, the book is destined to lead to future discoveries related to the use of plants for bioenergy production. It will assist in developing innovative ways of ameliorating energy problems on the horizon.

Download or read book ISO Catalogue written by International Organization for Standardization and published by . This book was released on 2007 with total page 946 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dielectric Spectroscopy in Biodiesel Production and Characterization written by Silvia Daniela Romano and published by Springer Science & Business Media. This book was released on 2010-11-30 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dielectric Spectroscopy in Biodiesel Production and Characterization presents the application of dielectric techniques in the production process of biodiesel, and in the characterization of biofuels, raw materials and effluents. In this comprehensive text, the reader will find information about biodiesel, production processes and biofuel characterization, including a description of dielectric techniques that are a useful alternative to – and have some important advantages over – international standards. Dielectric Spectroscopy in Biodiesel Production and Characterization is written in a language that is easy for both specialists and non-specialists to understand. It provides the concepts and tools needed for the application and correlation of the results of dielectric measurement with those from other techniques that are included in international standards. Aimed at a broad audience, the book gives a unified presentation, in a clear and concise way, of up-to-date information that has been gathered from a wide range of sources. Based on the ample research and teaching experience of the authors, Dielectric Spectroscopy in Biodiesel Production and Characterization will be of interest to professionals working in the liquid biofuels industry, researchers entering the field and also advanced university students on related courses.

Download or read book Advances in Biodiesel Production written by R Luque and published by Elsevier. This book was released on 2012-02-22 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biodiesel is one of the main biofuels capable of substituting fossil fuel usage in compression ignition vehicles, and is used in a variety of fuel blends worldwide. First-generation biodiesel has been used in national markets for some time, with fuel quality standards in place for this purpose. There remain, however, several restrictions to sustainable and long term market development, which is influenced by many factors, including food vs. fuel pressures. The development of new generations of biodiesel, aimed at more sustainable and effective feedstock utilisation alongside improved production efficiency and fuel quality, is critical to the future both of this industry and of the continuing use of biodiesel fuels in transportation.This book provides a timely reference on the advances in the development of biodiesel fuels, production processes and technologies. Part one reviews the life cycle sustainability assessment and socio-economic and environmental policy issues associated with advanced biodiesel production, as well as feedstocks and fuel quality standards. This coverage is extended in Part two, with chapters focussing on the development of methods and catalysts essential to the improvement and optimisation of biodiesel production processes and technologies.With its distinguished editors and international team of contributors, Advances in biodiesel production a standard reference for chemical, biochemical and industrial process engineers, as well as scientists and researchers in this important field. - Provides a timely reference on the advances in the development of biodiesel fuels, production processes and technologies - Reviews the life cycle sustainability assessment and socio-economic and environmental policy issues associated with advanced biodiesel production, as well as feedstocks and fuel quality standards - Discusses the development of methods and catalysts essential to the improvement and optimisation of biodiesel production processes and technologies

Download or read book Lubricants and Lubrication written by Theo Mang and published by John Wiley & Sons. This book was released on 2017-02-02 with total page 1306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the previous edition: "Contains something for everyone involved in lubricant technology." —Chemistry & Industry This completely revised third edition incorporates the latest data available and reflects the knowledge of one of the largest companies active in the business. The authors take into account the interdisciplinary character of the field, considering aspects of engineering, materials science, chemistry, health and safety. The result is a volume providing chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, focusing not only on the various products but also on specific application engineering criteria. A classic reference work, completely revised and updated (approximately 35% new material) focusing on sustainability and the latest developments, technologies and processes of this multi billion dollar business Provides chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, looking not only at the various products but also at specific application engineering criteria All chapters are updated in terms of environmental and operational safety. New guidelines, such as REACH, recycling alternatives and biodegradable base oils are introduced Discusses the integration of micro- and nano-tribology and lubrication systems Reflects the knowledge of Fuchs Petrolub SE, one of the largest companies active in the lubrication business 2 Volumes wileyonlinelibrary.com/ref/lubricants

Download or read book Catalogue written by International Organization for Standardization and published by . This book was released on 2005 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fuels and Lubricants Handbook written by and published by ASTM International. This book was released on with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Standards Catalogue written by and published by . This book was released on 1998 with total page 1114 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book BSI Standards Catalogue written by and published by . This book was released on 1997 with total page 1110 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book CGSB Catalogue written by Canadian General Standards Board and published by . This book was released on 1997 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Catalogue written by Canadian General Standards Board and published by . This book was released on 1997 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book BSI Catalogue written by and published by . This book was released on 1995 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Products and Services Catalogue written by and published by . This book was released on 2001 with total page 1228 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Guide to ASTM Test Methods for the Analysis of Petroleum Products and Lubricants written by R. A. Nadkarni and published by Astm International. This book was released on 2000 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes the essential elements of all analytical tests used to characterize petroleum products. The 350 plus entries are alphabetically arranged by chemical and physical properties, such as apparent viscosity, density, metal analysis, sulfur determination, vapor pressure, and water. Each entry co

Download or read book Kwic Index of International Standards written by International Organization for Standardization and published by Geneva : ISO/IEC. This book was released on 1991 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: