Download or read book ALTERNATIVE ROUTES TO IRON MAKING 2nd Ed written by SARANGI, ARABINDA and published by PHI Learning Pvt. Ltd.. This book was released on 2016 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: With a boom in the steel industry all over the world today, the demand of sponge iron has considerably increased as a feed (raw) material to steel making. The increase in the demand of sponge iron is also due to the fact that it is used for replacing coke making required for blast furnace processing. The primary objective of this book is to provide the basis, principles, fundamentals and theory of sponge iron production. This book, earlier titled as Sponge Iron Production in Rotary Kiln, is revised as per the feedback from students, faculty members and professionals. It, now, covers broad spectrum of alternative routes of iron making, therefore, the book is renamed as Alternative Routes to Iron Making. In this revised edition of the book, three new chapters have been added to fulfil the requirement of a textbook for various universities. NEW TO THIS EDITION • New chapters on: o Utilization of Sponge Iron o Environmental Pollution and Control in Sponge Iron Industries o Smelting Reduction Process • Inclusion of principle of fluidisation in fluidised bed processes • Description of Hyl III process with recent development of the process Primarily intended for undergraduate and postgraduate students of metal-lurgical engineering, this book is equally beneficial for researchers, and professionals engaged in DR processes and steel industries.
Download or read book International Conference on Advances in the Theory of Ironmaking and Steelmaking ATIS 2009 December 09 11 2009 written by Govind S. Gupta and published by Allied Publishers. This book was released on 2009 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributed articles presented in the International Conference on Advances in the Theory of Ironmaking and Steelmaking; organized by the Dept. of Material Engineering, IISc., Bangalore.
Download or read book Hot Metal Production by Smelting Reduction of Iron Oxide written by AMIT CHATTERJEE and published by PHI Learning Pvt. Ltd.. This book was released on 2014-04-03 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, in its second edition, continues to offer a comprehensive treatise on smelting reduction of iron oxide—an emerging alternative method of producing hot metal without using coke. This technique is being increasingly used for hot metal production, which has till date, been dominated by the traditional blast furnace method. Shortage of coking coal, high cost of coke and the recent enforcement of stricter environmental regulations have resulted in the advent of smelting reduction as a supplementary method of hot metal production. The book covers the details of this rapidly emerging method that holds particular relevance for countries like India, endowed with relatively large reserves of high grade iron ore but unfortunately, not matched by the availability of coking coal. The book offers an in-depth analysis of the theoretical as well as the practical aspects of smelting reduction. It begins by acquainting the readers with the current worldwide status of ironmaking, followed by the classification of the various smelting reduction processes. It then focuses on explaining the fundamentals of smelting reduction before proceeding with a critical appraisal of the various smelting reduction processes that are currently available. The future of this methodology in India and in the rest of the world is discussed in the concluding chapter. The book contains numerous illustrations to provide a clear understanding of the different processes, equipment and quality parameters relevant to smelting reduction-based ironmaking. The book is intended mainly for undergraduate and postgraduate engineering (particularly metallurgical engineering) students seeking an insight into this emerging ironmaking technology. It would also be of immense interest to researchers and technologists engaged in the subject of smelting reduction of iron oxide. A variety of chapter-end references would enable teachers and students to get acquainted with the extensive knowledge already available in this field. HIGHLIGHTS OF SECOND EDITION • Two new sections on HIsarna process and Circosmelt process have been incorporated. • New figures and tables have been used in some sections to illustrate the concepts with better clarity and give the up-to-date information. • Some references have also been added, making the text suitable for further study.
Download or read book Ironmaking and Steelmaking Processes written by Pasquale Cavaliere and published by Springer. This book was released on 2016-09-02 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes improvements in the iron and steel making process in the past few decades. It also presents new and improved solutions to producing high quality products with low greenhouse emissions. In addition, it examines legislative regulations regarding greenhouse emissions all around the world and how to control these dangerous emissions in iron and steel making plants.
Download or read book Hydrogen as a Future Energy Carrier written by Andreas Züttel and published by John Wiley & Sons. This book was released on 2011-09-22 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book fills the gap for concise but comprehensive literature on this interdisciplinary topic, involving chemical, physical, biological and engineering challenges. It provides broad coverage of the most important fields of modern hydrogen technology: hydrogen properties, production, storage, conversion to power, and applications in materials science. In so doing, the book covers all the pertinent materials classes: metal hydrides, inorganic porous solids, organic materials, and nanotubes. The authors present the entire view from fundamental research to viable devices and systems, including the latest scientific results and discoveries, practical approaches to design and engineering, as well as functioning prototypes and advanced systems.
Download or read book Iron Ore written by Liming Lu and published by Woodhead Publishing. This book was released on 2021-12-02 with total page 842 pages. Available in PDF, EPUB and Kindle. Book excerpt: Iron Ore: Mineralogy, Processing and Environmental Sustainability, Second Edition covers all aspects surrounding the second most important commodity behind oil. As an essential input for the production of crude steel, iron ore feeds the world's largest trillion-dollar-a-year metal market and is the backbone of the global infrastructure. The book explores new ore types and the development of more efficient processes/technologies to minimize environmental footprints. This new edition includes all new case studies and technologies, along with new chapters on the chemical analysis of iron ore, thermal and dry beneficiation of iron ore, and discussions of alternative iron making technologies. In addition, information on recycling solid wastes and P-bearing slag generated in steel mills, sustainable mining, and low emission iron making technologies from regional perspectives, particularly Europe and Japan, are included. This work will be a valuable resource for anyone involved in the iron ore industry. - Provides an overall view of the entire value chain, from iron ore to metal - Includes specific information on process/stage/operation in the value chain - Discusses challenges and developments, along with future trends in the iron ore and steel industries - Incorporates new, sustainable mining techniques
Download or read book CIM Bulletin written by Canadian Institute of Mining and Metallurgy and published by . This book was released on 2001 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Quarterly Bulletin of the Canadian Mining Institute written by Canadian Institute of Mining, Metallurgy and Petroleum and published by . This book was released on 2001 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flash Ironmaking written by H. Y. Sohn and published by CRC Press. This book was released on 2023-03-08 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the two major issues faced by the modern steel industry: CO2 emissions and energy consumption. The steel industry accounts for 6.7% of the anthropogenic CO2 emissions and consumes 6% of the total energy consumed in manufacturing. In response to these critical issues, a new technology called flash ironmaking has been developed, aimed at producing iron directly from iron ore concentrate using gaseous reductants/fuels such as natural gas or hydrogen. This ironmaking technology takes advantage of the rapid reaction rate of fine particles and bypasses the palletization process. This book discusses the principles of flash ironmaking, laboratory experiments, and design and operation of a prototype flash reactor. Provides theories and principles of ironmaking and a novel ironmaking technology Includes laboratory experiments to establish the kinetic feasibility of flash ironmaking Covers the design and operation of a prototype flash reactor as well as the design of industrial-size flash ironmaking reactors Describes various cases of flow sheet development, which forms the basis for process analysis and simulation Presents economic analysis case studies Presenting a novel technology that addresses contemporary issues facing one of the largest manufacturing industries, this book is aimed at professionals and researchers in metallurgy, materials engineering, manufacturing engineering, and related disciplines.
Download or read book Clean Ironmaking and Steelmaking Processes written by Pasquale Cavaliere and published by Springer. This book was released on 2019-07-18 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the available technologies that can be employed to reduce energy consumption and greenhouse emissions in the steel- and ironmaking industries. Ironmaking and steelmaking are some of the largest emitters of carbon dioxide (over 2Gt per year) and have some of the highest energy demand (25 EJ per year) among all industries; to help mitigate this problem, the book examines how changes can be made in energy efficiency, including energy consumption optimization, online monitoring, and energy audits. Due to negligible regulations and unparalleled growth in these industries during the past 15-20 years, knowledge of best practices and innovative technologies for greenhouse gas remediation is paramount, and something this book addresses. Presents the most recent technological solutions in productivity analyses and dangerous emissions control and reduction in steelmaking plants; Examines the energy saving and emissions abatement efficiency for potential solutions to emission control and reduction in steelmaking plants; Discusses the application of the results of research conducted over the last ten years at universities, research centers, and industrial institutions.
Download or read book Challenges and Prospects of Steelmaking Towards the Year 2050 written by Lauri Holappa and published by Mdpi AG. This book was released on 2022-01-03 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world steel industry is strongly based on coal/coke in ironmaking, resulting in huge carbon dioxide emissions corresponding to approximately 7% of the total anthropogenic CO2 emissions. As the world is experiencing a period of imminent threat owing to climate change, the steel industry is also facing a tremendous challenge in next decades. This themed issue makes a survey on the current situation of steel production, energy consumption, and CO2 emissions, as well as cross-sections of the potential methods to decrease CO2 emissions in current processes via improved energy and materials efficiency, increasing recycling, utilizing alternative energy sources, and adopting CO2 capture and storage. The current state, problems and plans in the two biggest steel producing countries, China and India are introduced. Generally contemplating, incremental improvements in current processes play a key role in rapid mitigation of specific emissions, but finally they are insufficient when striving for carbon neutral production in the long run. Then hydrogen and electrification are the apparent solutions also to iron and steel production. The book gives a holistic overview of the current situation and challenges, and an inclusive compilation of the potential technologies and solutions for the global CO2 emissions problem.
Download or read book Blast Furnace Ironmaking written by Ian Cameron and published by Elsevier. This book was released on 2019-10-22 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt: Blast Furnace Ironmaking: Analysis, Control, and Optimization uses a fundamental first principles approach to prepare a blast furnace mass and energy balance in ExcelTM. Robust descriptions of the main equipment and systems, process technologies, and best practices used in a modern blast furnace plant are detailed. Optimization tools are provided to help the reader find the best blast furnace fuel mix and related costs, maximize output, or evaluate other operational strategies using the ExcelTM model that the reader will develop. The first principles blast furnace ExcelTM model allows for more comprehensive process assessments than the 'rules of thumb' currently used by the industry. This book is suitable for undergraduate and postgraduate science and engineering students in the fields of chemical, mechanical, metallurgical and materials engineering. Additionally, steel company engineers, process technologists, and management will find this book useful with its fundamental approach, best practices description, and perspective on the future. - Provides sample problems, answers and assignments for each chapter - Explores how to optimize the blast furnace operation while maintaining required temperatures and gas flowrates - Describes all major blast furnace equipment and best practices - Features blast furnace operating data from five continents
Download or read book Iron Ores and Iron Oxide Materials written by Volodymyr Shatokha and published by BoD – Books on Demand. This book was released on 2018-07-11 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the multidisciplinary reading audience with a comprehensive state-of-the-art overview of research and innovations in the relationship between iron ores and iron ore materials. The book covers industrial sectors dealing with exploration and processing of iron ores as well as with advanced applications for iron ore materials and therefore entails a wide range of research fields including geology, exploration, beneficiation, agglomeration, reduction, smelting, and so on, thus encouraging life cycle thinking across the entire production chain. Iron remains the basis of modern civilization, and our sustainable future deeply depends upon our ability to satisfy the growing demand for iron and steel while decoupling hazardous emissions from economic growth. Therefore, environmental sustainability aspects are also broadly addressed. In response to socioeconomic and climatic challenges, the iron ore sector faces, this book delivers a vision for the new opportunities linked to deployment of the best available, innovative and breakthrough technologies as well as to advanced material applications.
Download or read book Blast Furnace Ironmaking written by Amit Chatterjee and published by . This book was released on 1993 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Basic Concepts of Iron and Steel Making written by Sujay Kumar Dutta and published by Springer Nature. This book was released on 2020-03-02 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the fundamentals of iron and steel making, including the physical chemistry, thermodynamics and key concepts, while also discussing associated problems and solutions. It guides the reader through the production process from start to finish, covers the raw materials, and addresses the types of processes and reactions involved in both conventional and alternative methods. Though primarily intended as a textbook for students of metallurgical engineering, the book will also prove a useful reference for professionals and researchers working in this area.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1984 with total page 1154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Annual Energy Outlook written by and published by . This book was released on 1992 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
