Download or read book Iron Ores and Iron Oxide Materials written by Volodymyr Shatokha and published by BoD – Books on Demand. This book was released on 2018-07-11 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the multidisciplinary reading audience with a comprehensive state-of-the-art overview of research and innovations in the relationship between iron ores and iron ore materials. The book covers industrial sectors dealing with exploration and processing of iron ores as well as with advanced applications for iron ore materials and therefore entails a wide range of research fields including geology, exploration, beneficiation, agglomeration, reduction, smelting, and so on, thus encouraging life cycle thinking across the entire production chain. Iron remains the basis of modern civilization, and our sustainable future deeply depends upon our ability to satisfy the growing demand for iron and steel while decoupling hazardous emissions from economic growth. Therefore, environmental sustainability aspects are also broadly addressed. In response to socioeconomic and climatic challenges, the iron ore sector faces, this book delivers a vision for the new opportunities linked to deployment of the best available, innovative and breakthrough technologies as well as to advanced material applications.
Download or read book Iron Ores and Iron Oxides New Perspectives written by Brajesh Kumar and published by BoD – Books on Demand. This book was released on 2023-09-13 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid development in engineering and biomedical applications of iron and iron oxide materials has attracted the attention of researchers around the world. discusses the extraction, synthesis, characterization, and applications of iron, iron oxide, and their nanoparticles/nanocomposites. It includes six chapters that address such topics as environmentally friendly techniques for engineering iron nanoparticles, the application of nano-dimensional iron oxide nanoparticles with nanotoxicology, biomedical applications of superparamagnetic iron oxide nanoparticles, and much more.
Download or read book Iron Ores and Iron Oxide Materials written by Volodymyr Shatokha and published by . This book was released on 2018 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the multidisciplinary reading audience with a comprehensive state-of-the-art overview of research and innovations in the relationship between iron ores and iron ore materials. The book covers industrial sectors dealing with exploration and processing of iron ores as well as with advanced applications for iron ore materials and therefore entails a wide range of research fields including geology, exploration, beneficiation, agglomeration, reduction, smelting, and so on, thus encouraging life cycle thinking across the entire production chain. Iron remains the basis of modern civilization, and our sustainable future deeply depends upon our ability to satisfy the growing demand for iron and steel while decoupling hazardous emissions from economic growth. Therefore, environmental sustainability aspects are also broadly addressed. In response to socioeconomic and climatic challenges, the iron ore sector faces, this book delivers a vision for the new opportunities linked to deployment of the best available, innovative and breakthrough technologies as well as to advanced material applications.
Download or read book The Iron Oxides written by Rochelle M. Cornell and published by John Wiley & Sons. This book was released on 2006-12-13 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together in one, compact volume all aspects of the available information about the iron oxides. It presents a coherent, up to date account of the properties, reactions and mechanisms of formation of these compounds. In addition, there are chapters dealing with iron oxides in rocks and soils, as biominerals and as corrosion products together with methods of synthesis and the numerous application of these compounds. Their role in the environment is also discussed. The authors are experts in the field of iron oxides and have worked on all the topics covered. Much recent data from the authors' own laboratories is included and opportunities for further research are indicated. Special features are the electron micrographs and colour plates together with the many different spectra used to illustrate properties and aspects of behaviour. Numerous tables and graphs enable trends and relationships to be seen at a glance. The book concludes with an extensive bibliography. This book should prove invaluable to industry and to all researchers who, whatever their background and level of experience, are interested in this rapidly expanding field. It is an essential volume for any scientific library and is now in its second, completely revised and extended edition!
Download or read book Iron Ore written by Liming Lu and published by Woodhead Publishing. This book was released on 2021-12-02 with total page 842 pages. Available in PDF, EPUB and Kindle. Book excerpt: Iron Ore: Mineralogy, Processing and Environmental Sustainability, Second Edition covers all aspects surrounding the second most important commodity behind oil. As an essential input for the production of crude steel, iron ore feeds the world's largest trillion-dollar-a-year metal market and is the backbone of the global infrastructure. The book explores new ore types and the development of more efficient processes/technologies to minimize environmental footprints. This new edition includes all new case studies and technologies, along with new chapters on the chemical analysis of iron ore, thermal and dry beneficiation of iron ore, and discussions of alternative iron making technologies. In addition, information on recycling solid wastes and P-bearing slag generated in steel mills, sustainable mining, and low emission iron making technologies from regional perspectives, particularly Europe and Japan, are included. This work will be a valuable resource for anyone involved in the iron ore industry. - Provides an overall view of the entire value chain, from iron ore to metal - Includes specific information on process/stage/operation in the value chain - Discusses challenges and developments, along with future trends in the iron ore and steel industries - Incorporates new, sustainable mining techniques
Download or read book The Reduction of Iron Ores written by Ludwig von Bogdandy and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the English edition the book was revised by the authors, taking into account a number of suggestions of the readers of the German edition. Some of the most important publications in the field of iron ore reduction, which appeared since 1967, have been used to bring the manuscript as far as possible up to date. The kind assistance of Dr. K. BOHNENKAMP of the Max-Planck-Institut fUr Eisenforschung, Dusseldorf, was much appreciated in this respect. Ohapters 2.9 and 2.10, dealing with the reduction of molten oxide slags by solid carbon and with the contribution of the water-gas reaction to iron ore reduction, have been added for the English edition. Ohapter 2.9 has been completely revised with the kind assistance of Dr. H. J. GRABKE, Stuttgart. Dipl.-Ing. J. LODDE contributed to this edition by revising the bibliography. Owing to the rapid development of the blast furnace it was necessary to revise Ohapter 5 considerably. In this field many valuable suggestions have been made by Dipl.-Ing. G. LANGE and Dipl.-Ing. P. HEINRICH. Furthermore, Ohapters3 and 4 have been thoroughly revised by Dr.-Ing. E. FORSTER and Dr.-Ing. U. SCHIERLOH. Last, but not least, we have to thank our translators for their excellent work.
Download or read book Mineral Processing Design and Operation written by Ashok Gupta and published by Elsevier. This book was released on 2006-06-26 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mineral Processing Design and Operations is expected to be of use to the design engineers engaged in the design and operation of mineral processing plants and including those process engineers who are engaged in flow-sheets development.Provides an orthodox statistical approach that helps in the understanding of the designing of unit processes. The subject of mineral processing has been treated on the basis of unit processes that are subsequently developed and integrated to form a complete strategy for mineral beneficiation. Unit processes of crushing, grinding, solid–liquid separation, flotation are therefore described in some detail so that a student at graduate level and operators at plants will find this book useful. Mineral Processing Design and Operations describes the strategy of mathematical modeling as a tool for more effective controlling of operations, looking at both steady state and dynamic state models.* Containing 18 chapters that have several worked out examples to clarify process operations* Filling a gap in the market by providing up-to-date research on mineral processing* Describes alternative approaches to design calculation, using example calculations and problem exercises
Download or read book Agglomeration of Iron Ores written by Ram Pravesh Bhagat and published by CRC Press. This book was released on 2019-07-11 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on agglomeration, or the size enlargement process, of iron ores. This process sits at the interface of mineral processing and extractive metallurgy. The book begins with a discussion of raw materials preparation and the beneficiation process. It then describes fundamental principles of the sintering and pelletization processes, including formation of green mix through granulation and green balls as well as chemical reactions during sintering. Finally, it offers a brief description of iron making processes and correlations related to the agglomerates: quality parameters and BF productivity and coke rate.
Download or read book Clean Ironmaking and Steelmaking Processes written by Pasquale Cavaliere and published by Springer. This book was released on 2019-07-18 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the available technologies that can be employed to reduce energy consumption and greenhouse emissions in the steel- and ironmaking industries. Ironmaking and steelmaking are some of the largest emitters of carbon dioxide (over 2Gt per year) and have some of the highest energy demand (25 EJ per year) among all industries; to help mitigate this problem, the book examines how changes can be made in energy efficiency, including energy consumption optimization, online monitoring, and energy audits. Due to negligible regulations and unparalleled growth in these industries during the past 15-20 years, knowledge of best practices and innovative technologies for greenhouse gas remediation is paramount, and something this book addresses. Presents the most recent technological solutions in productivity analyses and dangerous emissions control and reduction in steelmaking plants; Examines the energy saving and emissions abatement efficiency for potential solutions to emission control and reduction in steelmaking plants; Discusses the application of the results of research conducted over the last ten years at universities, research centers, and industrial institutions.
Download or read book The Iron ore Resources of Europe written by Max Roesler and published by . This book was released on 1921 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Iron Oxides written by Rochelle M. Cornell and published by Wiley-VCH. This book was released on 1996-09-26 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together in one, compact volume all aspects of the available information about the iron oxides. It presents a coherent, up to date account of the properties, reactions and mechanisms of formation of these compounds. In addition, there are chapters dealing with iron oxides in soils, as biominerals and as corrosion products together with methods of synthesis and the numerous application of these compounds. The authors are experts in the field of iron oxides and have worked on all the topics covered. Much recent data from the authors' own laboratories is included and opportunities for further research are indicated. Special features are the electron micrographs and colour plates together with the many different spectra used to illustrate properties and aspects of behaviour. Numerous tables and graphs enable trends and relationships to be seen at a glance. The book concludes with an extensive bibliography. This book should prove invaluable to industry and to all researchers who, whatever their background and level of experience, are interested in this rapidly expanding field. It is an essential volume!
Download or read book Intermetallic Compounds written by Mahmood Aliofkhazraei and published by BoD – Books on Demand. This book was released on 2018-05-30 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intermetallic compounds are usually brittle with high melting points. Their properties are often found among ceramic and metallic materials. In most cases, their hot corrosion resistance and simultaneously hardness are important. One of the main applications of intermetallic compounds is for superalloy turbine blades in which they show appropriate high-temperature-related properties. This book collects new developments about intermetallic compounds and their recent usages.
Download or read book Biotechnology of Metals written by K.A. Natarajan and published by Elsevier. This book was released on 2018-06-13 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biotechnology of Metals: Principles, Recovery Methods and Environmental Concerns deals with all aspects of metal biotechnology in different areas, such as biogenesis, biomaterials, biomimetic strategies, biohydrometallurgy, mineral biobeneficiation, electrobioleaching, microbial corrosion, human implants, concrete biocorrosion, microbiology of environment pollution, and bioremediation. As the technology of this interdisciplinary science has diversified over the last five years, this book provides a valuable source for scientists and students in a number of disciplines, including geology, chemistry, metallurgy, microbiology, chemical engineering, environment, civil engineering, and biomedical engineering. - Offers comprehensive coverage of an interdisciplinary subject - Outlines the role of microbiology and biotechnology in mining, metallurgy, waste disposal and environmental control - Covers new topics, such as biogenesis, biomaterials processing, the role of micro-organisms in causing corrosion, and much more - Presents scientifically illustrated experimental research methods in metals biotechnology
Download or read book Iron in Soils and Clay Minerals written by J.W. Stucki and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 903 pages. Available in PDF, EPUB and Kindle. Book excerpt: Probably more than any other element, iron markedly influences the chemical and physical properties of soils and sediments in the earth. Considering its transition metal status, with potential variation in electronic configuration, ionic radius, and magnetic moment, combined with its abundance and relatively large mass, little wonder that one sees its unique influence on every hand. Pre sentations at the NATO Advanced Study Institute (NATO AS!) on Iron in Soils and Clay Minerals reviewed and discussed the occurrence, behavior, and properties of Fe-bearing minerals found in soils and in the clay mineral groups kaolinite, smectite, and mica. Also discussed at the NATO AS! were the basic chemical properties of Fe, methods for separating and identifying Fe in minerals, and the role of Fe minerals in weathering and other soil-forming processes. The present publication is the reviewed and edited proceedings of that Advanced Study Institute. The sequence of chapters follows the general pattern beginning with introductory chapters which overview the general occurrence of Fe in the earth and its chemistry, both generally and in mineral environments, followed by identification and characterization methods for Fe and Fe phases in minerals. The properties and behavior of Fe oxides, Fe-bearing clay minerals, and other Fe minerals in soils are then described, and the text ends with a summary of the role of Fe in soil-forming processes. A Table of Contents and subject index are provided to assist the reader in finding specific topics within the text.
Download or read book Characterization of Minerals Metals and Materials 2015 written by John Carpenter and published by Springer. This book was released on 2016-12-20 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection focuses on the characterization of minerals, metals, and materials as well as the application of characterization results on the processing of these materials. Papers cover topics such as clays, ceramics, composites, ferrous metals, non-ferrous metals, minerals, electronic materials, magnetic materials, environmental materials, advanced materials, and soft materials. In addition, papers covering materials extraction, materials processing, corrosion, welding, solidification, and method development are included. This book provides a current snapshot of characterization in materials science and its role in validating, informing, and driving current theories in the field of materials science. This volume will serve the dual purpose of furnishing a broad introduction of the field to novices while simultaneously serving to keep subject matter experts up-to-date.
Download or read book Treatise on Process Metallurgy written by Seshadri Seetharaman and published by . This book was released on 2014 with total page 1745 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book EPD Congress 2016 written by Antoine Allanore and published by Springer. This book was released on 2016-12-15 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: EPD Congress is an annual collection that addresses extraction and processing metallurgy. The papers in this book are drawn from symposia held at the 2016 Annual Meeting of The Minerals, Metals & Materials Society. The 2016 edition includes papers from the following symposia: •Materials Processing Fundamentals •Advanced Characterization Techniques for Quantifying and Modeling Deformation
