Download or read book Maraging Steels written by W Sha and published by Elsevier. This book was released on 2009-10-26 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maraging steels are high-strength steels combined with good toughness. They are used particularly in aerospace and tooling applications. Maraging refers to the ageing of martensite, a hard microstructure commonly found in steels.Maraging steels: modelling of microstructure, properties and applications covers the following topics: Introduction to maraging steels; Microstructure of maraging steels; Mechanical properties of maraging steels; Thermodynamic calculations for quantifying the phase fraction and element partition in maraging systems and precipitation hardening steels; Quantification of phase transformation kinetics in maraging steels; Quantification of age hardening in maraging steels; Maraging steels and overageing; Precipitation hardening stainless steel; Applications of artificial neural network on modelling maraging steel properties.With its distinguished authors, Maraging steels: modelling of microstructure, properties and applications is a standard reference for industry and researchers concerned with maraging steels and modelling as well as users of maraging steels in the aerospace and tooling sectors. The book includes both conventional maraging steels and precipitation hardened (PH) stainless steels. - Provides an overview of maraging steels including microstructure and mechanical properties - Reviews thermodynamic calculations for quantifying the phase fraction and element partition in maraging steels - Includes chapters on the quantification of phase transformation kinetics and age hardening in maraging steels

Download or read book Metallic Materials and Elements for Aerospace Vehicle Structures written by and published by . This book was released on 1990 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Aerospace Materials written by Adrian P Mouritz and published by Elsevier. This book was released on 2012-05-23 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: The structural materials used in airframe and propulsion systems influence the cost, performance and safety of aircraft, and an understanding of the wide range of materials used and the issues surrounding them is essential for the student of aerospace engineering.Introduction to aerospace materials reviews the main structural and engine materials used in aircraft, helicopters and spacecraft in terms of their production, properties, performance and applications.The first three chapters of the book introduce the reader to the range of aerospace materials, focusing on recent developments and requirements. Following these introductory chapters, the book moves on to discuss the properties and production of metals for aerospace structures, including chapters covering strengthening of metal alloys, mechanical testing, and casting, processing and machining of aerospace metals. The next ten chapters look in depth at individual metals including aluminium, titanium, magnesium, steel and superalloys, as well as the properties and processing of polymers, composites and wood. Chapters on performance issues such as fracture, fatigue and corrosion precede a chapter focusing on inspection and structural health monitoring of aerospace materials. Disposal/recycling and materials selection are covered in the final two chapters.With its comprehensive coverage of the main issues surrounding structural aerospace materials,Introduction to aerospace materials is essential reading for undergraduate students studying aerospace and aeronautical engineering. It will also be a valuable resource for postgraduate students and practising aerospace engineers. - Reviews the main structural and engine materials used in aircraft, helicopters and space craft in terms of their properties, performance and applications - Introduces the reader to the range of aerospace materials, focusing on recent developments and requirements, and discusses the properties and production of metals for aerospace structures - Chapters look in depth at individual metals including aluminium, titanium, magnesium, steel and superalloys

Download or read book Military Handbook written by and published by . This book was released on 1990 with total page 1052 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Source Book on Maraging Steels written by Raymond Frank Decker and published by ASM International(OH). This book was released on 1979 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Welding of Maraging Steels written by F. H. Lang and published by . This book was released on 1971 with total page 41 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nickel and Its Alloys written by Samuel Jacob Rosenberg and published by . This book was released on 1968 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Metallurgy Behavior and Application of the 18 percent Nickel Maraging Steels A Survey written by A. M. Hall and published by . This book was released on 1968 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report resulted from a survey of users and manufacturers of maraging steels, Government agencies, research institutions, and published literature. It presents the technical status of the 18-percent nickel maraging steels in detail and brings together a large body of knowledge with regard to the metallurgical and engineering aspects of maraging steels. Since such steels were first announced in 1959, they have become highly important in aerospace, defense, and industrial work. The requirements of the National Aeronautics and Space Administration have given impetus to their development, and research now underway is expected to result in further improvements and applicability. The NASA Office of Technology Utilization sponsored this report as part of its program to disseminate information on technological developments which appear to be useful for general industrial applications.

Download or read book A Textbook of Engineering Materials and Metallurgy written by A. Alavudeen and published by Firewall Media. This book was released on 2006 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book NBS Monograph written by and published by . This book was released on 1959 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book ASM Specialty Handbook written by Joseph R. Davis and published by ASM International. This book was released on 1995-01-01 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: If you are involved with machining or metalworking or you specify materials for industrial components, this book is an absolute must. It gives you detailed and comprehensive information about the selection, processing, and properties of materials for machining and metalworking applications. They include wrought and powder metallurgy tool steels, cobalt base alloys, cemented carbides, cermets, ceramics, and ultra-hard materials. You'll find specific guidelines for optimizing machining productivity through the proper selection of cutting tool materials plus expanded coverage on the use of coatings to extend cutting tool and die life. There is also valuable information on alternative heat treatments for improving the toughness of tool and die steels. All new material on the correlation of heat treatment microstructures and properties of tool steels is supplemented with dozens of photomicrographs. Information on special tooling considerations for demanding applications such as isothermal forging, die casting of metal matrix composites, and molding of corrosive plastics is also included. And you'll learn about alternatives to ferrous materials for metalworking applications such as carbides, cermets, ceramics, and nonferrous metals like aluminum, nickel, and copper base alloys.

Download or read book Forging Equipment Materials and Practices written by Taylan Altan and published by . This book was released on 1973 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: The handbook provides design engineers with up-to-date information about the many aspects of forging including descriptions of important developments made more recently by industry and/or government. The handbook describes suitable measures for in-process quality control and quality assurance, summarizes relationships between forging practices and important mechanical properties and compares various forging devices to aid in equipment selection. Attention is also given to describing practices for relatively new materials and emerging forging practices. (Modified author abstract).

Download or read book Mechanical Engineers Handbook Volume 1 written by Myer Kutz and published by John Wiley & Sons. This book was released on 2015-02-02 with total page 1042 pages. Available in PDF, EPUB and Kindle. Book excerpt: Full coverage of materials and mechanical design in engineering Mechanical Engineers' Handbook, Fourth Edition provides a quick guide to specialized areas you may encounter in your work, giving you access to the basics of each and pointing you toward trusted resources for further reading, if needed. The accessible information inside offers discussions, examples, and analyses of the topics covered. This first volume covers materials and mechanical design, giving you accessible and in-depth access to the most common topics you'll encounter in the discipline: carbon and alloy steels, stainless steels, aluminum alloys, copper and copper alloys, titanium alloys for design, nickel and its alloys, magnesium and its alloys, superalloys for design, composite materials, smart materials, electronic materials, viscosity measurement, and much more. Presents comprehensive coverage of materials and mechanical design Offers the option of being purchased as a four-book set or as single books, depending on your needs Comes in a subscription format through the Wiley Online Library and in electronic and custom formats Engineers at all levels of industry, government, or private consulting practice will find Mechanical Engineers' Handbook, Volume 1 a great resource they'll turn to repeatedly as a reference on the basics of materials and mechanical design.

Download or read book Physical Metallurgy of Metals and Alloys written by Dipak Kumar Mondal and published by Cambridge Scholars Publishing. This book was released on 2024-06-26 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will be very suitable for recommended reading in undergraduate and graduate courses offered by Departments of Metallurgical and Materials Engineering, Mechanical Engineering and Production Engineering in Universities and Technological Institutions world-wide. The topics in the book start with the basics of atomic structure and electronic configuration of materials, followed by the usual approach towards solid-state thermodynamics. Topics on phase diagram, phase transformation, heat treatment and various other metallurgical processes are discussed at length, putting emphasis on structure-property correlation. Additionally, the book serves as a ready reference for topics on practical metallography, microscopy and image analysis, highlighting the processes of counting of phases, determining particle size and measuring grain sizes. What is unique in this book is the introduction of chapters and contents featuring new concepts and ideas with regard to heat treating steels and developing structure and properties, which are exclusively missing in the old and existing text books on Physical Metallurgy. The new concepts and ideas regarding heat treatment introduced in this book will provide scope to initiate extended research on metals and alloys. Industries may also take-up the proposed new ideas of heat treatment for implementation as future steps of production.

Download or read book Metal Powder Based Additive Manufacturing written by Kun Zhou and published by John Wiley & Sons. This book was released on 2023-05-08 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Powder—Based Additive Manufacturing Highly comprehensive resource covering all key aspects of the current developments of metal powder—based additive manufacturing Metal Powder—Based Additive Manufacturing provides valuable knowledge and critical insights regarding the recent advances in various metal powder—based additive manufacturing techniques. This book also reviews typical powder preparation processes and highlights the significance of metal powder—based additive manufacturing for various industrial applications. The key features covered in this book: A rigorous overview of the underlying theories and practical applications of metal powder—based additive manufacturing techniques, including laser powder bed fusion, electron beam melting, laser-based directed energy deposition, and metal binder jetting. An expansive introduction of each technique and its significance pertaining to the printing processes, metallurgical defects, powder materials, equipment, and the microstructures and mechanical properties of the printed parts. A deep exploration of the preparation processes of metal powders for additive manufacturing and the effects of different processes on the powder properties. Comprehensive case studies of parts printed by metal powder—based additive manufacturing for various industrial applications. By providing extensive coverage of relevant concepts in the field of metal powder—based additive manufacturing, this book highlights its essential role in Industry 4.0 and serves as a valuable resource for scientists, engineers, and students in materials science, powder metallurgy, physics, and chemistry. The rich research experience of the authors in additive manufacturing ensures that the readers are provided with both an in-depth understanding and informative technical guidance of metal powder—based additive manufacturing.

Download or read book Fracture Mechanics written by Robert P. Wei and published by Cambridge University Press. This book was released on 2010-02-08 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture and 'slow' crack growth reflect the response of a material (i.e. its microstructure) to the conjoint actions of mechanical and chemical driving forces and are affected by temperature. There is therefore a need for quantitative understanding and modeling of the influences of chemical and thermal environments and of microstructure, in terms of the key internal and external variables, and for their incorporation into design and probabilistic implications. This text, which the author has used in a fracture mechanics course for advanced undergraduate and graduate students, is based on the work of the author's Lehigh University team whose integrative research combined fracture mechanics, surface and electrochemistry, materials science, and probability and statistics to address a range of fracture safety and durability issues on aluminum, ferrous, nickel, and titanium alloys and ceramics. Examples are included to highlight the approach and applicability of the findings in practical durability and reliability problems.

Download or read book Laser Additive Manufacturing written by Milan Brandt and published by Woodhead Publishing. This book was released on 2016-09-01 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Additive Manufacturing: Materials, Design, Technologies, and Applications provides the latest information on this highly efficient method of layer-based manufacturing using metals, plastics, or composite materials. The technology is particularly suitable for the production of complex components with high precision for a range of industries, including aerospace, automotive, and medical engineering. This book provides a comprehensive review of the technology and its range of applications. Part One looks at materials suitable for laser AM processes, with Part Two discussing design strategies for AM. Parts Three and Four review the most widely-used AM technique, powder bed fusion (PBF) and discuss other AM techniques, such as directed energy deposition, sheet lamination, jetting techniques, extrusion techniques, and vat photopolymerization. The final section explores the range of applications of laser AM. - Provides a comprehensive one-volume overview of advances in laser additive manufacturing - Presents detailed coverage of the latest techniques used for laser additive manufacturing - Reviews both established and emerging areas of application