Download or read book Ion Beam Modification of Metal polymer Interfaces for Improved Adhesion written by Boris A. Ratchev and published by . This book was released on 1995 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ion Beam Modification of Materials written by J.S. Williams and published by Newnes. This book was released on 2012-12-02 with total page 1157 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference consisted of 15 oral sessions, including three plenary papers covering areas of general interest, 22 specialist invited papers and 51 contributed presentations as well as three poster sessions. There were several scientific highlights covering a diverse spectrum of materials and ion beam processing methods. These included a wide range of conventional and novel applications such as: optical displays and opto-electronics, motor vehicle and tooling parts, coatings tailored for desired properties, studies of fundamental defect properties, the production of novel (often buried) compounds, and treating biomedical materials. The study of nanocrystals produced by ion implantation in a range of host matrices, particularly for opto-electronics applications, was one especially new and exciting development. Despite several decades of study, major progress was reported at the conference in understanding defect evolution in semiconductors and the role of defects in transient impurity diffusion. The use of implantation to tune or isolate optical devices and in forming optically active centres and waveguides in semiconductors, polymers and oxide ceramics was a major focus of several presentations at the conference. The formation of hard coatings by ion assisted deposition or direct implantation was also an area which showed much recent progress. Ion beam techniques had also developed apace, particularly those based on plasma immersion ion implantation or alternative techniques for large area surface treatment. Finally, the use of ion beams for the direct treatment of cancerous tissue was a particularly novel and interesting application of ion beams.
Download or read book Ion Beam Treatment of Polymers written by Alexey Kondyurin and published by Elsevier. This book was released on 2010-07-07 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer materials are used in different fields of industries, from microelectronice to medicine. Ion beam implantation is method of surface modification when surface properties must be significantly changed and bulk properties of material must be saved. Ion Beam Treatment of Polymers contains results of polymer investigations and techniques development in the field of polymer modification by high energy ion beams. This book is intended for specialists in polymer science who have interest to use an ion beam treatment for improvement of polymer properties, for specialists in physics who search a new application of ion beam and plasma equipment and also for students who look for future fields of high technology. Chapter 1-3 are devoted to overview of the basic processes at high energy ion penetration into solid target. The historical aspects and main physical aspects are covered. A basic equipment principles and main producers of equipment for ion beam treatment are considered. Chapter 4 contains chemical transformations in polymers during and after high energy ion penetration. The modern methods and results of experimental and theoretical investigation are described. Chapters 5-10 are devoted to properties of polymers after ion beam treatment, regimes of treatment, available applications, in particular: increase of adhesion of polymers and a mechanism of an adhesion increase, wetting angle of polymer by water and its stability, adhesion of cells on polymer surface, drug release regulation from polymer coating and others. Chapter 11 contains our last results on polymerisation processes in liquid oligomer composition under high vacuum, plasma and ion beam conditions as simulation of free space environment. * By scientists working in polymer chemistry, physics of ion beam implantation and in development and production of ion beam equipment * Covering industrial and scientific applications of ion beam implanted polymers * Also for students with an interest in future fields of high technology
Download or read book Polymer Surface Modification to Enhance Adhesion written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2024-03-01 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: POLYMER SURFACE MODIFICATION TO ENHANCE ADHESION This unique, comprehensive and groundbreaking book is the first on this important subject. Polymer Surface Modification to Enhance Adhesion comprises 13 chapters and is divided into two parts: Part 1: Energetic Treatments; and Part 2: Chemical Treatments. Topics covered include atmospheric pressure plasma treatment of polymers to enhance adhesion; corona treatment of polymer surfaces to enhance adhesion; flame surface treatment of polymers to enhance adhesion; vacuum UV photo-oxidation of polymer surfaces to enhance adhesion; optimization of adhesion of polymers using photochemical surface modification UV/Ozone surface treatment of polymers to enhance adhesion; adhesion enhancement of polymer surfaces by ion beam treatment; polymer surface modification by charged particles; laser surface modification of polymeric materials; competition in adhesion between polysort and monosort functionalized polyolefinic surfaces; amine-terminated dendritic materials for polymer surface modification; arginine-glycine-aspartic acid (RGD) modification of polymer surfaces; and adhesion promoters for polymer surfaces. Audience The book will be of great interest to polymer scientists, surface scientists, adhesionists, materials scientists, plastics engineers, and to those involved in adhesive bonding, packaging, printing, painting, metallization, biological adhesion, biomedical devices, and polymer composites.
Download or read book The Induced Changes of Material Surfaces Due to Ion Beam Bombardment written by Ali Atta Mohamed Ahmed and published by . This book was released on 2011-11 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Surface Modification Relevance to Adhesion Volume 2 written by Kash L. Mittal and published by CRC Press. This book was released on 2023-01-06 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book chronicles the proceedings of the Second International Symposium on Polymer Surface Modification: Relevance to Adhesion held Newark, New Jersey, May 24--26, 1999. Polymeric materials are intrinsically not very adhesionable and this necessitates their surface treatment to enhance their adhesion characteristics to other materials. Since the first symposium on this topic, held in 1993, there has been a tremendous R&D activity in devising novel or ameliorating the existing techniques for surface modification of polymers. This volume contains a total of 32 papers, which have been rigorously peer-reviewed and suitably revised before inclusion in this volume. The book is divided into three parts as follows. Part 1: Plasma Surface Modification Techniques; Part 2: Other/Miscellaneous Surface Modification Techniques; and Part 3: General Papers. The topics covered include: plasma surface modification of a variety of polymers using various plasma gases; atmospheric plasma system; surface functionalization; ultrahydrophobic polymeric surfaces; metallization of plasma treated polymers; surface modification of polymers via molecular design for adhesion promotion; wet chemical methods for polymer surface modification; laser surface modification of various polymers; UV/ozone treatment; surface and interface studies of treated polymer surfaces by an array of techniques; bioadhesion of polymeric biomaterials to tissue; polymer-fiber systems; and plasma deposited coatings.
Download or read book Plasma Surface Modification of Polymers Relevance to Adhesion written by Kash L. Mittal and published by CRC Press. This book was released on 2014-04-29 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of invited papers (previously published in special issues of the Journal of Adhesion Science and Technology) written by internationally recognized researchers actively working in the field of plasma surface modification. It provides a current, comprehensive overview of the plasma treatment of polymers. In contrast to plasm
Download or read book Ion Implantation Into Metals written by V. Ashworth and published by Elsevier. This book was released on 2016-04-20 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ion Implantation into Metals presents the proceedings of the 3rd International Conference on the Modification of Surface Properties of Metals by Ion Implantation, held at UMIST, Manchester, UK on June 23-26, 1981. The book includes papers on aqueous corrosion of ion-implanted iron; the mechanical properties and high temperature oxidation behavior in aqueous corrosion; and the potential of ion beam processing in this field of materials science and engineering. The text also presents papers on the important scientific progress in metal physics and related subjects.
Download or read book Ion Beam Treatment of Polymers written by Alexey Kondyurin and published by Newnes. This book was released on 2014-09-25 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ion Beam Treatment of Polymers, Second Edition presents the results of polymer investigations and technique development in the field of polymer modification by high-energy ion beams. It shows how to use ion beam equipment in the polymer industry, as well as how to use it to produce new polymer materials. The authors, scientists and researchers active in the field, provide analysis and data from their work, and give an overview of related work by others. The authors focus on wetting, adhesion, hardness, chemical activity, environmental stability, biocompatibility, new synthesis methods, and space flight construction. The technologies of material modification by a beam of high energy ions have wide applications in different fields, from microelectronics to medicine. Historically, ion beam treatment of polymers had fewer applications due to high costs of ion beam equipment and low costs of polymer materials. The modern development of new pulse sources with a high current density and wide ion beams increase the effectiveness of ion beam technology for polymers. Collates data from many scientists working in polymer chemistry, physics of ion beam implantation, and in development and production of ion beam equipment Covers industrial and scientific applications of ion beam implanted polymers Integrates physical and chemical aspects of the processes in polymers treated by ion beams
Download or read book Beam Effects Surface Topography and Depth Profiling in Surface Analysis written by Alvin W. Czanderna and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many books are available that detail the basic principles of the different methods of surface characterization. On the other hand, the scientific literature provides a resource of how individual pieces of research are conducted by particular labo- tories. Between these two extremes the literature is thin but it is here that the present volume comfortably sits. Both the newcomer and the more mature scientist will find in these chapters a wealth of detail as well as advice and general guidance of the principal phenomena relevant to the study of real samples. In the analysis of samples, practical analysts have fairly simple models of how everything works. Superimposed on this ideal world is an understanding of how the parameters of the measurement method, the instrumentation, and the char- teristics of the sample distort this ideal world into something less precise, less controlled, and less understood. The guidance given in these chapters allows the scientist to understand how to obtain the most precise and understood measu- ments that are currently possible and, where there are inevitable problems, to have clear guidance as the extent of the problem and its likely behavior.
Download or read book Interlayer Dielectrics for Semiconductor Technologies written by Shyam P Muraka and published by Elsevier. This book was released on 2003-10-13 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor technologies are moving at such a fast pace that new materials are needed in all types of application. Manipulating the materials and their properties at atomic dimensions has become a must. This book presents the case of interlayer dielectrics materials whilst considering these challenges. Interlayer Dielectrics for Semiconductor Technologies cover the science, properties and applications of dielectrics, their preparation, patterning, reliability and characterisation, followed by the discussion of different materials including those with high dielctric constants and those useful for waveguide applications in optical communications on the chip and the package. * Brings together for the FIRST time the science and technology of interlayer deilectrics materials, in one volume * written by renowned experts in the field * Provides an up-to-date starting point in this young research field.
Download or read book Ion Beam Mixing of Metal fluoropolymer Interfaces written by Darcie LeAnn Dennis and published by . This book was released on 1998 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallized Plastics 5 6 written by K. L. Mittal and published by VSP. This book was released on 1998-10 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book chronicles the proceedings of the 5th and 6th symposia on Metallized Plastics: Fundamental and Applied Aspects, held in May 1996 and September 1997 respectively. This volume contains 29, carefully reviewed, revised and up-dated papers which were presented at both symposia. The book is divided in the following three parts: Metallization Techniques and Properties of Metal Deposits; Spectroscopic Investigation of Interfacial Interactions; Surface Modification and Adhesion Aspects. Topics covered include: various metallization techniques for a variety of plastic substrates and simplification of electroless method by using plasma or UV laser pretreatment; various properties of metal deposits; investigation of metal-polymer interfaces using a variety of spectroscopic techniques; interaction of metals with self-assembled monolayers; study of early stages of metal-polymer interface formation; surface modification of plastics by a host of techniques including plasma, excimer laser, ion beams and characterization of modified plastics surfaces; surface modification of polymers used in the low Earth Orbit space environment; adhesion aspects of metallized plastics including a quantitative adhesion test for metal coated polymer fibers and nondestructive techniques for monitoring metallized plastics adhesion.
Download or read book Progress in Adhesion Adhesives Volume 5 written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2020-07-28 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the ever-increasing amount of research being published, it is a Herculean task to be fully conversant with the latest research developments in any field, and the arena of adhesion and adhesives is no exception. Thus, topical review articles provide an alternate and very efficient way to stay abreast of the state-of-the-art in many subjects representing the field of adhesion science and adhesives. Based on the success of the preceding volumes in this series “Progress in Adhesion and Adhesives”, the present volume comprises 13 review articles published in Volume 7 (2019) of Reviews of Adhesion and Adhesives. The subjects of these review articles fall into the following areas: Adhesively bonded joints Adhesives (including bioadhesives) and their applications Nanocomposite polymer adhesives Polymer surface modification Wettability and surface free energy Adhesion of bacteria The topics covered include: Adhesion behavior of plasma treated steel and its alloys; debonding on demand of adhesively bonded joints; bioadhesive polymers; adhesives in the footwear industry; nanocomposite polymer adhesives; ion beam treatment of polymer surfaces to enhance adhesion; natural to artificial non-wettable surfaces and applications; plasma oxidation of polyolefins; wettability and surface free energy characterization of textiles; bioadhesive nanoformulations; laser-assisted tailoring of surface wettability; functionally graded adhesively bonded joints; adhesion of colloids and bacteria to porous media.
Download or read book Metallized Plastics 2 written by K.L. Mittal and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the proceedings of the Second Symposium on Metallized Plastics: Fundamental and Applied Aspects held under the aegis of the Dielectric Science and Technology Division of the Electrochemical Society in Montreal, Canada, May 7-10, 1990. The first symposium on this topic was held in Chicago, October 10-12, 1988 and the proceedings of l which have been chronicled in a hard-bound volume l As pointed out in the Preface to the proceedings of the first symposium the metallized plastics find scores of applications ranging from very mundane to very sophisticated. Even a cursory look at the literature will convince that this field has sprouted; and there is every reason to believe that with all the research and development activities taking place, new and exciting applications of metallized plastics will emerge. The program for the second symposium was very comprehensive as it included 46 papers covering many aspects of metallized plastics. This symposium was a testimonial to the brisk research activity and keen interest in the topic of metallized plastics. The success of this symposium reinforced our earlier belief that there was a definite need to hold symposia on this topic on a regular basis. Concomitantly, the third symposium in this vein was held in Phoenix, Arizona, October 13-18, 1991 and the fourth is planned for May 16-21, 1993 in Honolulu, Hawaii. As regards the present volume, it contains a total of 35 papers covering a variety of topics ranging from very fundamental to very applied.
Download or read book Ion Beam and Plasma Technology Development for Surface Modification at Los Alamos National Laboratory written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: We are developing two high-throughput technologies for materials modification. The first is a repetitive intense ion beam source for materials modification through rapid surface melt and resolidification (up to 10[sup 10] deg/sec cooling rates) and for ablative deposition of coatings. The short range of the ions (typically 0.1 to 5 micrometers) allows vaporization or melting at moderate beam energy density (typically 1-50 J/cm[sup 2]). A new repetitive intense ion beam accelerator called CHAMP is under development at Los Alamos. The design beam parameters are: E=200 keV, I=15 kA, [tau]=1 [micro]s, and 1 Hz. This accelerator will enable applications such as film deposition, alloying and mixing, cleaning and polishing, corrosion and wear resistance, polymer surface treatments, and nanophase powder synthesis. The second technology is plasma source ion implantation (PSII) using plasmas generated from both gas phase (using radio frequency excitation) and solid phase (using a cathodic arc) sources. We have used PSII to directly implant ions for surface modification or as method for generating graded interfaces to enhance the adhesion of surface coatings. Surfaces with areas of up to 16 m[sup 2] and weighing more than a thousand kilograms have been treated in the Los Alamos PSII chamber. In addition, PSII in combination with cathodic source deposition has been used to form highly adherent, thick Er[sub 2]O[sub 3] coatings on steel for reactive metal containment in casting. These coatings resist delamination under extreme mechanical and thermal stress.
Download or read book Polyimides and other high temperature polymers written by K. L. Mittal and published by VSP. This book was released on 2003-03 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Containing 32 peer-reviewed papers, this volume documents the proceedings of the international symposium of the same name (held under the aegis of the Materials Science and Technology Conferences) in December of 2001. Devoted to research into high-temperature polymers, the papers are organized into sections dealing with synthesis, properties, and bulk characterization in the first half and surface modification, interfacial or adhesion aspects, and applications in the second. Annotation (c)2003 Book News, Inc., Portland, OR (booknews.com).
