Download or read book ASME Technical Papers written by and published by . This book was released on 2000 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Gas Turbine Heat Transfer and Cooling Technology Second Edition written by Je-Chin Han and published by CRC Press. This book was released on 2012-11-27 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference for engineers and researchers, Gas Turbine Heat Transfer and Cooling Technology, Second Edition has been completely revised and updated to reflect advances in the field made during the past ten years. The second edition retains the format that made the first edition so popular and adds new information mainly based on selected published papers in the open literature. See What’s New in the Second Edition: State-of-the-art cooling technologies such as advanced turbine blade film cooling and internal cooling Modern experimental methods for gas turbine heat transfer and cooling research Advanced computational models for gas turbine heat transfer and cooling performance predictions Suggestions for future research in this critical technology The book discusses the need for turbine cooling, gas turbine heat-transfer problems, and cooling methodology and covers turbine rotor and stator heat-transfer issues, including endwall and blade tip regions under engine conditions, as well as under simulated engine conditions. It then examines turbine rotor and stator blade film cooling and discusses the unsteady high free-stream turbulence effect on simulated cascade airfoils. From here, the book explores impingement cooling, rib-turbulent cooling, pin-fin cooling, and compound and new cooling techniques. It also highlights the effect of rotation on rotor coolant passage heat transfer. Coverage of experimental methods includes heat-transfer and mass-transfer techniques, liquid crystal thermography, optical techniques, as well as flow and thermal measurement techniques. The book concludes with discussions of governing equations and turbulence models and their applications for predicting turbine blade heat transfer and film cooling, and turbine blade internal cooling.

Download or read book Paper written by and published by . This book was released on 2000 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the ASME Design Engineering Technical Conferences written by and published by . This book was released on 2000 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Numerical Study of Discrete hole Film Cooling written by Mulugeta K. Berhe and published by . This book was released on 1997 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Heat Transfer on a Film Cooled Blade Effect of Hole Physics written by and published by . This book was released on 1998 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Recent Advances In Computational Science And Engineering Proceedings Of The International Conference On Scientific And Engineering Computation Ic sec 2002 written by Justin Kwok and published by World Scientific. This book was released on 2002-12-02 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: IC-SEC 2002 serves as a forum for engineers and scientists who are involved in the use of high performance computers, advanced numerical strategies, computational methods and simulation in various scientific and engineering disciplines. The conference creates a platform for presenting and discussing the latest trends and findings about the state of the art in their particular field(s) of interest. IC-SEC also provides a forum for the interdisciplinary blending of computational efforts in various diversified areas of science, such as biology, chemistry, physics and materials science, as well as all branches of engineering. The proceedings cover a broad range of topics and an application area which involves modelling and simulation work using high performance computers.

Download or read book Proceedings of International Conference on Aerospace System Science and Engineering 2018 written by Zhongliang Jing and published by Springer. This book was released on 2019-03-28 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents high-quality contributions in the subject area of Aerospace System Science and Engineering, including topics such as: Trans-space vehicle systems design and integration, Air vehicle systems, Space vehicle systems, Near-space vehicle systems, Opto-electronic system, Aerospace robotics and unmanned system, Aerospace robotics and unmanned system, Communication, navigation and surveillance, Dynamics and control, Intelligent sensing and Information fusion, Aerodynamics and aircraft design, Aerospace propulsion, Avionics system, Air traffic management, Earth observation, Deep space exploration, Bionic micro-aircraft/spacecraft. The book is a selection of articles from the 2nd International Conference on Aerospace System Science and Engineering, held in Moscow, Russia, from 31 July to 1 August 2018. The conference is co-organized by Shanghai Jiao Tong University and Moscow Aviation Institute. This is a forum that brings together experts in astronautics and aeronautics to share new ideas and findings.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Studies of the Use of Freon 12 as a Wind tunnel Testing Medium written by Albert E. Von Doenhoff and published by . This book was released on 1953 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: A number of studies relating to the use of Freon-12 as a substitute medium for air in aerodynamic testing have been made. The use of Freon-12 instead of air makes possible large savings in wind-tunnel drive power. Because of the fact that the ratio of specific heats is approximately 1.13 for Freon-12 as compared with 1.4 for air, some differences exist between data obtained in Freon-12 and air. Methods for predicting aerodynamic characteristics of bodies in air from data obtained in Freon-12, however, have been developed from the concept of similarity of the streamline pattern. These methods, derived from consideration of two-dimensional flows, provide substantial agreement in all cases for which comparative data are available. These data consist of measurements throughout a range of Mach number from approximately 0.4 to 1.2 of pressure distributions and hinge moments on swept and unswept wings having aspect ratios ranging from 4.0 to 9.0, including cases where a substantial part of the wing was stalled.

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1971 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced technologies in flow dynamics and combustion in propulsion and power volume II written by Lei Luo and published by Frontiers Media SA. This book was released on 2023-02-09 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Numerical Simulation of Wind Turbines written by Alessandro Bianchini and published by MDPI. This book was released on 2021-09-10 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains the research contributions belonging to the Special Issue "Numerical Simulation of Wind Turbines", published in 2020-2021. They consist of 15 original research papers and 1 editorial. Different topics are discussed, from innovative design solutions for large and small wind turbine to control, from advanced simulation techniques to noise prediction. The variety of methods used in the research contributions testifies the need for a holistic approach to the design and simulation of modern wind turbines and will be able to stimulate the interest of the wind energy community.

Download or read book Heat Transfer in Gas Turbines written by Bengt Sundén and published by Witpress. This book was released on 2001 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title presents and reflects current active research on various heat transfer topics and related phenomena in gas turbine systems. It begins with a general introduction to gas turbine heat transfer, before moving on to specific areas.

Download or read book Energy Research Abstracts written by and published by . This book was released on 1988 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Impingement Jet Cooling in Gas Turbines written by R.S. Amano and published by WIT Press. This book was released on 2014-05-28 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the requirement for enhanced cooling technologies on modern gas turbine engines, advanced research and development has had to take place in field of thermal engineering. Among the gas turbine cooling technologies, impingement jet cooling is one of the most effective in terms of cooling effectiveness, manufacturability and cost. The chapters contained in this book describe research on state-of-the-art and advanced cooling technologies that have been developed, or that are being researched, with a variety of approaches from theoretical, experimental, and CFD studies. The authors of the chapters have been selected from some of the most active researchers and scientists on the subject. This is the first to book published on the topics of gas turbines and heat transfer to focus on impingement cooling alone.

Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 1982 with total page 1090 pages. Available in PDF, EPUB and Kindle. Book excerpt: