Download or read book Investigation of Structural and Magnetic Properties of CoCrTa Co3O4 Pt Perpendicular Magnetic Thin Film Media and MFM Study of Ultra high Density Magnetic Bit Patterns written by Xing Song and published by . This book was released on 1996 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanostructure Science and Technology written by Richard W. Siegel and published by Springer Science & Business Media. This book was released on 1999-09-30 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Timely information on scientific and engineering developments occurring in laboratories around the world provides critical input to maintaining the economic and technological strength of the United States. Moreover, sharing this information quickly with other countries can greatly enhance the productivity of scientists and engineers. These are some of the reasons why the National Science Foundation (NSF) has been involved in funding science and technology assessments comparing the United States and foreign countries since the early 1980s. A substantial number of these studies have been conducted by the World Technology Evaluation Center (WTEC) managed by Loyola College through a cooperative agreement with NSF. The National Science and Technology Council (NSTC), Committee on Technology's Interagency Working Group on NanoScience, Engineering and Technology (CT/IWGN) worked with WTEC to develop the scope of this Nanostucture Science and Technology report in an effort to develop a baseline of understanding for how to strategically make Federal nanoscale R&D investments in the coming years. The purpose of the NSTC/WTEC activity is to assess R&D efforts in other countries in specific areas of technology, to compare these efforts and their results to U. S. research in the same areas, and to identify opportunities for international collaboration in precompetitive research. Many U. S. organizations support substantial data gathering and analysis efforts focusing on nations such as Japan. But often the results of these studies are not widely available. At the same time, government and privately sponsored studies that are in the public domain tend to be "input" studies.
Download or read book Nanotechnology Research Directions IWGN Workshop Report written by R.S. Williams and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: energy production, environmental management, transportation, communication, computation, and education. As the twenty-first century unfolds, nanotechnology's impact on the health, wealth, and security of the world's people is expected to be at least as significant as the combined influences in this century of antibiotics, the integrated circuit, and human-made polymers. Dr. Neal Lane, Advisor to the President for Science and Technology and former National Science Foundation (NSF) director, stated at a Congressional hearing in April 1998, "If I were asked for an area of science and engineering that will most likely produce the breakthroughs of tomorrow, I would point to nanoscale science and engineering. " Recognizing this potential, the White House Office of Science and Technology Policy (OSTP) and the Office of Management and Budget (OMB) have issued a joint memorandum to Federal agency heads that identifies nanotechnology as a research priority area for Federal investment in fiscal year 2001. This report charts "Nanotechnology Research Directions," as developed by the Interagency W orking Group on Nano Science, Engineering, and Technology (IWGN) of the National Science and Technology Council (NSTC). The report incorporates the views of leading experts from government, academia, and the private sector. It reflects the consensus reached at an IWGN-sponsored workshop held on January 27-29, 1999, and detailed in contributions submitted thereafter by members of the V. S. science and engineering community. (See Appendix A for a list of contributors.
Download or read book Nanostructured Materials written by C. Koch and published by Cambridge University Press. This book was released on 2002-03 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book narrows the field into the study of synthesis, characterization, and properties relevant to applications that require bulk, and mainly inorganic materials.
Download or read book Nanostructured Materials and Nanotechnology written by Hari Singh Nalwa and published by Gulf Professional Publishing. This book was released on 2002 with total page 859 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology Provides comprehensive coverage of the dominant technology of the 21st century Written by a truly international list of contributors.
Download or read book Nanophase Materials written by G.C. Hadjipanayis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanophase Materials is the first and, as yet, the only comprehensive book published in this new and exciting area of materials science. It gives a broad overview of the revolutionary new field of nanophase materials; a view which spans the materials, physics, and chemistry research communities at a tutorial level that is suitable for advanced undergraduates, graduate students, postdoctoral researchers, and experts or would-be experts in the science of nanostructured materials. The articles are authored by many of the world's most prominent scientists in this field. The book covers the diverse methods for synthesizing nanophase materials, a variety of subsequent processing methodologies, what is known about the structures of these materials on various length scales from atomic to macroscopic, and the properties of these unique and novel materials. The materials properties covered are mechanical, electronic, optical, and magnetic and hence span a wide range of important new opportunities for technological applications.
Download or read book Non equilibrium Processing of Materials written by C. Suryanarayana and published by Elsevier. This book was released on 1999-07-22 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid technological developments during the later half of the 20th century have demanded materials that are stronger, capable of use at much higher temperatures, more corrosion-resistant, and much less expensive than those currently used. These demands become even more significant on the threshold of the new century and the millennium. Significant improvements in properties can only be achieved by processing the materials under far-from-equilibrium (or non-equilibrium) conditions. Several new processing technologies have been developed during the past few decades including, rapid solidification, spray forming, mechanical alloying, ion mixing, vapor deposition, laser processing and plasma processing. Remarkable advances have been made in recent years in the science and technology of these processes used to synthesize, characterize, and apply these materials processed under non-equilibrium conditions. Some of these techniques have evolved from laboratory curiosity to commercial-scale manufacturing in just a few years. In other cases, industrial necessity prompted development of the technology, and the science followed later. The chapters in this book have been written by people who are world-recognized experts in their respective fields. Each chapter describes the principles, processing techniques, special features of the materials produced, and their applications. An extensive list of references is provided at the end of each chapter that will facilitate location of additional information on specific aspects of any technique.
Download or read book Nanostructured Materials written by Carl C. Koch and published by . This book was released on 2006 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructure science and technology has become an identifiable, if very broad and multidisciplinary, field of research and emerging application in recent years. It is one of the most visible and growing research areas in materials science in its broadest sense. Nanostructured materials include atomic clusters, layered (lamellar) films, filamentary structures, and bulk nanostructured materials. The common thread to these materials is the nanoscale dimensionality, i.e. at least one dimension less than 100 nm, more typically less than 50 nm. In some cases, the physics of such nanoscale materials can be very different from the macroscale properties of the same substance. The different, often superior, properties that can occur is the driving force behind the explosion in research interest in these materials. With the recent intense interest in this broad field, a number of books, articles and conferences have been published. The justification for yet another book is twofold. First, the speed of developments makes it necessary to record another snapshot of the field. Second, this book narrows the field into the study of synthesis, characterization, and properties relevant to applications that require bulk, and mainly inorganic materials.
Download or read book Mechanical Properties of Nanocrystalline Materials written by James C. M. Li and published by CRC Press. This book was released on 2011-09-02 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book concentrates on both understanding and development of nanocrystalline materials. The original relation that connects grain size and strength, known as the Hall-Petch relation, is studied in the nanometer grain size region. The breakdown of such a relation is a challenge. Why and how to overcome it? Is the dislocation mechanism still operating when the grain size is very small, approaching the amorphous limit? How do we go from the microstructure information to the continuum description of the mechanical properties?
Download or read book Research Opportunities for Materials with Ultrafine Microstructures written by National Research Council and published by National Academies Press. This book was released on 1989-02-01 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials with nanoscale structure (i.e. a structure of less than 100 nanometers in size) represent a new and exciting field of research. These materials can be produced in many ways, possess a number of unique properties compared with coarser-scaled structures, and have several possible applications with significant technological importance. Based on a state-of-the-art survey of research findings and commercial prospects, this new book concludes that much work remains to be done in characterizing these structures and their exceptional properties, and presents recommendations for the specific research and development activities needed to fill these gaps in our understanding.
Download or read book Magnetic Nanostructures written by Hari Singh Nalwa and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Twelve contributions comprise a reference source that is a coherent presentation of the state of the art in this fast growing area of nanotechnology research. Magnetic nanostructures are important for their phenomenal potential for storage; their great commercial value will come from applications in
Download or read book Structure and Magnetic Properties of CoCrTa Cr and CoCrTaPt Cr Alloy Thin Films for Ultra high Density Magnetic Recording written by Kyusik Sin and published by . This book was released on 1995 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physics of New Materials written by Francisco E. Fujita and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physics of New Materials After the discoveries and applications of superconductors, new ceramics, amorphous and nano-materials, shape memory and other intelligent materials, physics became more and more important, comparable with chemistry, in the research and development of advanced materials. In this book, several important fields of physics-oriented new-materials research and physical means of analyses are selected and their fundamental principles and methods are described in a simple and understandable way. It is suitable as a textbook for university materials science courses.
Download or read book Nanostructure Design written by Ehud Gazit and published by Springer Science & Business Media. This book was released on 2008-08-05 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: As one of the fastest growing fields of research in the 21st century, nanotechnology is sure to have an enormous impact on many aspects of our lives. Nanostructure Design: Methods and Protocols serves as a major reference for theoretical and experimental considerations in the design of biological and bio-inspired building blocks, the physical characterization of the formed structures, and the development of their technical applications. The chapters contributed by leading experts are divided into two sections, the first of which covers experimental aspects of nanostructure design and the second delves into computational methods. As a volume of the highly successful Methods in Molecular BiologyTM series, this collection pulls together cutting-edge protocols, written in a step-by-step, readily reproducible format certain to guide researchers to the desired results. Comprehensive and essential, Nanostructure Design: Methods and Protocols uses biological principles and vehicles on design to aid scientists in the great challenges still ahead.
Download or read book Clusters and Cluster assembled Materials written by Robert S. Averback and published by . This book was released on 1991 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanoscale Devices Fundamentals and Applications written by Rudolf Gross and published by Springer. This book was released on 2006-06-29 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects papers on the fundamentals and applications of nanoscale devices, first presented at the NATO Advanced Research Workshop on Nanoscale Devices – Fundamentals and Applications held in Kishinev, Moldova, in September 2004. The focus is on the synthesis and characterization of nanoscale magnetic materials; fundamental physics and materials aspects of solid-state nanostructures; development of novel device concepts and design principles for nanoscale devices; and on applications in electronics with emphasis on defence against the threat of terrorism.
Download or read book Study of Advanced Thin Film Microstructure for Ultra high Density Magnetic Recording written by Tai Min and published by . This book was released on 1993 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt:
