Download or read book Investigation of Springback Associated with Composite Material Component Fabrication written by M. A. Benzie and published by . This book was released on 1997 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Investigation of Springback Associated with Composite Material Component Fabrication Msfc Center Director s Discretionary Fund Final Report Project 94 09 written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-05 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this research project was to examine processing and design parameters in the fabrication of composite components to obtain a better understanding and attempt to minimize springback associated with composite materials. To accomplish this, both processing and design parameters were included in a Taguchi-designed experiment. Composite angled panels were fabricated, by hand layup techniques, and the fabricated panels were inspected for springback effects. This experiment yielded several significant results. The confirmation experiment validated the reproducibility of the factorial effects, error recognized, and experiment as reliable. The material used in the design of tooling needs to be a major consideration when fabricating composite components, as expected. The factors dealing with resin flow, however, raise several potentially serious material and design questions. These questions must be dealt with up front in order to minimize springback: viscosity of the resin, vacuum bagging of the part for cure, and the curing method selected. These factors directly affect design, material selection, and processing methods. Benzie, M. A. Marshall Space Flight Center ...
Download or read book FY 1998 Scientific and Technical Reports Articles Papers and Presentations written by and published by . This book was released on 1999 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Research on Information Science Automation and Material System III written by Helen Zhang and published by Trans Tech Publications Ltd. This book was released on 2013-06-13 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2013 3rd International Conference on Information Science, Automation and Material System (ISAM 2013), April 13-14, 2013, Guangzhou, China
Download or read book Composite Chronicles A Study of the Lessons Learned in the Development Production and Service of Composite Structures written by and published by . This book was released on 1994 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Natural Fibers to Composites written by Yasir Nawab and published by Springer Nature. This book was released on 2022-12-11 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural fiber composites are a preferred alternative to conventional composites due to their environment-friendly nature. However, their market share is limited due to: a) limited number and quantities of natural fibers available for composites, b) diversity in fibers structure, c) poor mechanical properties of fibers as well as composites, d) susceptibility to microbial attacks, and e) cellulose degradation temperature around 200 deg C, which hinders the development of natural fiber reinforced thermoplastic composites using thermoforming at high temperatures. A number of researchers have contributed to the solution of the problem of poor mechanical properties and issues related to fabrication during the last decade. This book covers these different solutions. The book is divided into two principal themes: a) structure–property relationship: fibers to composites—it includes the discussion on fibers, their surface modifications, variation in the structure of reinforcement, and approaches for the enhancement of properties. b) Fabrication process of composites—it includes the novel approaches used for the development of natural fiber composites using the commingling technique for thermoplastic composites.
Download or read book Practical Analysis of Composite Laminates written by J. N. Reddy and published by CRC Press. This book was released on 2018-02-06 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials are increasingly used in aerospace, underwater, and automotive structures. They provide unique advantages over their metallic counterparts, but also create complex challenges to analysts and designers. Practical Analysis of Composite Laminates presents a summary of the equations governing composite laminates and provides practical methods for analyzing most common types of composite structural elements. Experimental results for several types of structures are included, and theoretical and experimental correlations are discussed. The last chapter is devoted to practical analysis using Designing Advanced Composites (DAC), a PC-based software on the subject. This comprehensive text can be used for a graduate course in mechanical engineering, and as a valuable reference for professionals in the field.
Download or read book Bulletin of Prosthetics Research written by and published by . This book was released on 1976 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Non Crimp Fabric Composites written by Stepan V Lomov and published by Elsevier. This book was released on 2011-04-19 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-crimp fabric (NCF) composites are reinforced with mats of straight (non-crimped) fibres, giving them such advantages as strength, ease of handling and low manufacturing costs. Non-crimp fabric composites provides a comprehensive review of the use of NCF composites, their manufacture and applications in engineering.Part one covers the manufacture of non-crimp fabrics, including also topics such as structural stitching and automated defect analysis. Part two goes on to discuss the manufacture of non-crimp fabric composites, with chapters covering such topics as deformability and permeability of NCF. Part three focuses on the properties of NCF composites, with chapters on stiffness and strength, damage progression and fatigue. Finally, part four covers the applications of NCF composites, including chapters on the aerospace and automotive industries as well as wind turbines and helicopter applications. The book concludes with a discussion of cost analysis of NCF composites in engineering applications.With its distinguished editor and international team of expert contributors, Non-crimp fabric composites is an essential reference for composite manufacturers and structural and mechanical engineers in industries using NCF composites, as well as academics with a research interest in the field. - Provides a comprehensive review of the use of NCF composites, their manufacture and applications in engineering - Reviews the manufacture of non-crimp fabrics, including also topics such as structural stitching and automated defect analysis - Examines the properties of NCF composites considering stiffness and strength, damage progression and fatigue
Download or read book CANCOM 2001 Proceedings of the 3rd Canadian International Conference on Composites written by S.V. Hoa and published by CRC Press. This book was released on 2020-12-17 with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains technical papers, presented at the third Canadian International Conference on Composites held in Canada in 2001, on topics including liquid composite molding, process modelling, virtual manufacturing, novel materials and processes, and metal matrix composites.
Download or read book Dynamic Methods and Process Advancements in Mechanical Manufacturing and Materials Engineering written by Davim, J. Paulo and published by IGI Global. This book was released on 2012-07-31 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering and design are often a necessary steps for an industry to become effective. Industry modeling can help to bridge the communication gap among engineers and system designers. Dynamic Methods and Process Advancements in Mechanical, Manufacturing, and Materials Engineering examines the principles of physics and materials science for analysis, design, manufacturing and maintenance of mechanical equipments and systems. Targeting researchers, practitioners, and academicians, this volume promotes innovative findings in mechanical, manufacturing and materials engineering.
Download or read book Proceedings of the 2nd International Conference on Innovation and Technology in Sports ICITS 2023 27 28 November Malaysia written by Zulkifli Mohamed and published by Springer Nature. This book was released on with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Additive Manufacturing with Novel Materials written by R. Rajasekar and published by John Wiley & Sons. This book was released on 2024-02-19 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: ADDITIVE MANUFACTURING With NOVEL MATERIALS The book explores practically the latest advancements and techniques in 3D and 4D printing using innovative and unconventional materials. This book comprehensively provides insights into various additive manufacturing processes, novel materials, and their properties, as well as the basic knowledge of AM process parameters, post-processing techniques, and their applications. It also explores the fundamental concepts and recent advancements in the development of novel materials for several applications, with special emphasis on platforms like AM techniques for polymers, ceramics, metallic materials, composites, nanomaterials, hydrogels, etc. Specific topics like environmental aspects of 3D printing and advanced 4D printing are also introduced. The technological aspects of AM are discussed in a concise and understandable way, with extensive illustrations. Also covered are the challenges and opportunities that arise from 3D printing with these materials. Audience The book will benefit researchers and industry engineers who work in additive manufacturing, mechanical engineering, 3D/4D printing, and materials science.
Download or read book Hot Stamping Advanced Manufacturing Technology of Lightweight Car Body written by Ping Hu and published by Springer. This book was released on 2016-10-14 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the advanced manufacturing technology of original innovations in hot stamping of lightweight car body. A detailed description of the technical system and basic knowledge of sheet metal forming is given, which helps readers quickly understand the relevant knowledge in the field. Emphasis has been placed on the independently developed hot stamping process and equipment, which help describe the theoretical and experimental research on key problems involving stress field, thermal field and phase transformation field in hot stamping process. Also, a description of the formability at elevated temperature and the numerical simulation algorithms for high strength steel hot stamping is given in combination with the experiments. Finally, the book presents some application cases of hot stamping technology such as the lightweight car body design using hot stamping components and gradient hardness components, and the cooling design of the stamping tool. This book is intended for researchers, engineers and graduate students in vehicle engineering, mechanical engineering, especially in the field of advanced manufacturing technology. The book also provides a useful reference for other new technology related temperature and phase transformation, such as aluminum-magnesium alloy hot stamping.
Download or read book Continual Improvement A Bibliography with Indexes 1992 1993 written by and published by . This book was released on 1994 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Resin Transfer Moulding for Aerospace Structures written by T. Kruckenberg and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Resin Transfer Moulding and other similar 'liquid moulding' manufacturing methods have been used to make non-structural composites for the last 35 years. However, in the last eight years these methods have become the subject of enormous interest by aerospace manufacturing companies. Resin Transfer Moulding for Aerospace Structures describes all aspects of Resin Transfer Moulding (RTM) for aerospace structures. Written by an international team of experts, from both industry and academia, it is a comprehensive work providing complete and detailed information on the process of RTM from theoretical modelling to practical experience. With subjects including manufacturing, tooling, fabric design and flow modelling all covered, this book is an invaluable up-to-the-minute reference source which provides the reader with a good understanding of RTM and its possible uses, especially for high performance applications. Resin Transfer Moulding for Aerospace Structures is an ideal guide for those in the aerospace and related industries, who want to understand and utilize RTM, as well as those directly involved in the RTM industry.
