Download or read book Investigation of Modulation Techniques for Matrix Converters written by Fan Yue and published by . This book was released on 2007 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Optimal Control and Appliation of AC AC Matrix Converters written by Chaiypat Watthanasarn and published by . This book was released on 1997 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: The thesis presents the development of real-time control techniques for direct AC-AC matrix converters. Principles and performance characteristics of two pulse-width modulation methods;' the Venturini and Space Vector Modulation algorithms, are thoroughly explored. Comparative studies of the methods in several important aspects are performed, leading to the construction of a DSP-controlled high harmonic performance and low power loss matrix converter suitable for AC drives. The indisputable benefits of a matrix converter are further demonstrated by applying it successfully to the rotor current control of a computer-simulated wind-turbine driven doubly-fed induction generator. While investigating the two PWM methods, a novel technique for the Venturini scheme has been developed which compensates the effects of the supply voltage distortion and/or unbalance. For the SVM method, a new procedure for input displacement angle control has been derived. Comparison of the two methods' relative performances is made with regard to operation under unbalanced/distorted supply voltage, output voltage and input current harmonics, and converter losses........

Download or read book New Modulation Method for Matrix Converters written by Roberto Arturo Petrocelli and published by . This book was released on 2002 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 2021 International Symposium of Asian Control Association on Intelligent Robotics and Industrial Automation IRIA written by Institute of Electrical and Electronics Engineers and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The symposium will provide a platform for exchange of research ideas on new technologies such as AI and Machine Learning in several areas of industrial automation and robotics.

Download or read book Optimal Control of Matrix Converters Under Distorted and Unbalanced Supply Conditions written by Coneth Graham Richards and published by . This book was released on 2013 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: A matrix converter is a forced commutated converter which uses an array of controlled bi-directional switches as the main power processing elements to create a variable voltage system with unrestricted frequency. It does not contain any DC link circuit and does not require any large energy storage elements. The output frequency is theoretically infinitely variable as opposed to cyclo-converters. This study will evaluate present modulation techniques for matrix converters. Chapter 2 will review the present direct and indirect modulation techniques for Matrix Converters. Chapter 3 develops the indirect modulation model, based on space vector modulation techniques. In chapter 4 various state space models are developed and an optimised switching pattern, based on the least square error, is developed.

Download or read book Simplified Control of Matrix Converter and Investigations Into Its Applications written by Satish Thuta and published by . This book was released on 2007 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design and Control of Matrix Converters written by Anindya Dasgupta and published by Springer. This book was released on 2017-03-30 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes two target applications for synchronous systems: regulated 3-phase voltage supply and voltage sag mitigation. It presents a detailed design procedure for converter switches and filters considering all steady-state, commutation and dynamic requirements. This work has evolved from previously published research by the authors, which in turn is part of a larger effort to expand the application domain of matrix converters to power systems. The objectives of the work have been categorized into the following: developing a dynamic model that provides adequate design insights; designing filters; and devising a control scheme. The low frequency dynamic model is first analyzed for regulated voltage supplies assuming balanced system. The system is modeled relative to a synchronous rotating (dq) frame linearized around an operating point. The input–output variables are related by non-diagonal transfer function matrices. Individual transfer function sub-matrices are sequentially investigated and it is shown that, depending on the input power, input voltage and filter parameters, the appearance of a set of right half zeros is possible. The book then considers filter design, as well as general issues like ripple attenuation, regulation, reactive current loading, and filter losses. The book also addresses additional constraints that may be imposed by dynamic requirements and commutation. In the third stage, voltage controller design is detailed for a 3-phase regulated voltage supply. In dq domain, output voltage control represents a multivariable control problem. This is reduced to a single variable control problem while retaining all possible right half zeros, thereby preserving the internal stability of the system. Consequently, the standard single variable control design technique has been used to design a controller. The analytically predicted dynamic response has been verified by experimental results. It was possible to operate the system beyond the critical power boundary where the right half zeros emerge. Lastly, the developed control approach has been extended to voltage sag mitigation with adequate modifications. A 3-wire linear load and both symmetrical and asymmetrical voltage sags have been considered. Experimentally obtained response time for sag mitigation was found to be less than the power supply holdup time of most of the sensitive equipment. This book will be useful to both researchers and graduate students.

Download or read book Impedance Source Matrix Converters and Control written by Liu and published by Wiley-Blackwell. This book was released on 2024-10-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Control in Power Electronics written by Marian P. Kazmierkowski and published by Elsevier. This book was released on 2002-08-30 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors were originally brought together to share research and applications through the international Danfoss Professor Programme at Aalborg University in Denmark. Personal computers would be unwieldy and inefficient without power electronic dc supplies. Portable communication devices and computers would also be impractical. High-performance lighting systems, motor controls, and a wide range of industrial controls depend on power electronics. In the near future we can expect strong growth in automotive applications, dc power supplies for communication systems, portable applications, and high-end converters. We are approaching a time when all electrical energy will be processed and controlled through power electronics somewhere in the path from generation to end use. - The most up-to-date information available is presented in the text - Written by a world renowned leader in the field

Download or read book An Investigation of Matrix Converter Losses and Soft Switching Techniques written by Michael Bland and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Pulse Width Modulation for Power Converters written by D. Grahame Holmes and published by John Wiley & Sons. This book was released on 2003-10-03 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: * The first single volume resource for researchers in the field who previously had to depend on separate papers and conference records to attain a working knowledge of the subject. * Brings together the field's diverse approaches into an integrated and comprehensive theory of PWM

Download or read book High Power Converters and AC Drives written by Bin Wu and published by John Wiley & Sons. This book was released on 2017-01-17 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference of the latest developments in MV drive technology in the area of power converter topologies This new edition reflects the recent technological advancements in the MV drive industry, such as advanced multilevel converters and drive configurations. It includes three new chapters, Control of Synchronous Motor Drives, Transformerless MV Drives, and Matrix Converter Fed Drives. In addition, there are extensively revised chapters on Multilevel Voltage Source Inverters and Voltage Source Inverter-Fed Drives. This book includes a systematic analysis on a variety of high-power multilevel converters, illustrates important concepts with simulations and experiments, introduces various megawatt drives produced by world leading drive manufacturers, and addresses practical problems and their mitigations methods. This new edition: Provides an in-depth discussion and analysis of various control schemes for the MV synchronous motor drives Examines new technologies developed to eliminate the isolation transformer in the MV drives Discusses the operating principle and modulation schemes of matrix converter (MC) topology and multi-module cascaded matrix converters (CMCs) for MV drives, and their application in commercial MV drives Bin Wu is a Professor and Senior NSERC/Rockwell Automation Industrial Research Chair in Power Electronics and Electric Drives at Ryerson University, Canada. He is a fellow of Institute of Electrical and Electronics Engineers (IEEE), Engineering Institute of Canada (EIC), and Canadian Academy of Engineering (CAE). Dr. Wu has published more than 400 papers and holds more than 30 granted/pending US/European patents. He co-authored several books including Power Conversion and Control of Wind Energy Systems and Model Predictive Control of Wind Energy Conversion Systems (both by Wiley-IEEE Press). Mehdi Narimani is a Postdoctoral Research Associate with the Department of Electrical and computer Engineering at Ryerson University, Canada, and Rockwell Automation Canada. He is a senior member of IEEE. Dr. Narimani is author/co-author of more than 50 technical papers and four US/European patents (issued/pending review). His current research interests include power conversion, high power converters, control of power electronics, and renewable energy systems.

Download or read book Three phase AC AC Power Converters Based on Matrix Converter Topology written by Paweł Szcześniak and published by Springer Science & Business Media. This book was released on 2013-02-28 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: AC voltage frequency changes is one of the most important functions of solid state power converters. The most desirable features in frequency converters are the ability to generate load voltages with arbitrary amplitude and frequency, sinusoidal currents and voltages waveforms; the possibility of providing unity power factor for any load; and, finally, a simple and compact power circuit. Over the past decades, a number of different frequency converter topologies have appeared in the literature, but only the converters with either a voltage or current DC link are commonly used in industrial applications. Improvements in power semiconductor switches over recent years have resulted in the development of many structures of AC-AC converters without DC electric energy storage. Such converters are an alternative solution for frequently recommended systems with DC energy storage and are characterized by a lower price, smaller size and longer lifetime. Most of the these topologies are based on the structure of the matrix converter. Three-Phase AC-AC Power Converters Based On Matrix Converter Topology: Matrix-reactance frequency converters concept presents a review of power frequency converters, with special attention paid to converters without DC energy storage. Particular attention is paid to nine new converters named matrix-reactance frequency converters which have been developed by the author and the team of researchers from Institute of Electrical Engineering at the University of Zielona Góra. The topologies of the presented matrix-reactance frequency converters are based on a three-phase unipolar buck-boost matrix-reactance chopper with source or load switches arranged as in a matrix converter. This kind of approach makes it possible to obtain an output voltage greater than the input one (similar to that in a matrix-reactance chopper) and a frequency conversion (similar to that in a matrix converter). Written for researchers and Ph.D. students working in the field of power electronics converters and drive systems, Three-Phase AC-AC Power Converters Based On Matrix Converter Topology: Matrix-reactance frequency converters concept will also be valuable to power electronics converter designers and users; R&D centers; and readers needing industry solutions in variable speed drive systems, such as automation and aviation.

Download or read book An Investigation of Matrix Converter Losses and Soft Switching Techniques written by Michael Bland (PhD.) and published by . This book was released on 2003 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Static Power Frequency Changers written by L. Gyugyi and published by John Wiley & Sons. This book was released on 1976 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Boost Matrix Converters in Clean Energy Systems written by Ekrem Karaman and published by . This book was released on 2014 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dissertation describes an investigation of novel power electronic converters, based on the ultra-sparse matrix topology and characterized by the minimum number of semiconductor switches. The Z-source, Quasi Z-source, Series Z-source and Switched-inductor Z-source networks were originally proposed for boosting the output voltage of power electronic inverters. These ideas were extended here on three-phase to three-phase and three-phase to single-phase indirect matrix converters. For the three-phase to three-phase matrix converters, the Z-source networks are placed between the three-switch input rectifier stage and the output six-switch inverter stage. A brief shoot-through state produces the voltage boost. An optimal pulse width modulation technique was developed to achieve high boosting capability and minimum switching losses in the converter. For the three-phase to single-phase matrix converters, those networks are placed similarly. For control purposes, a new modulation technique has been developed. As an example application, the proposed converters constitute a viable alternative to the existing solutions in residential wind-energy systems, where a low-voltage variable-speed generator feeds power to the higher-voltage fixed-frequency grid. Comprehensive analytical derivations and simulation results were carried out to investigate the operation of the proposed converters. Performance of the proposed converters was then compared between each other as well as with conventional converters. The operation of the converters was experimentally validated using a laboratory prototype.

Download or read book Switching Power Converters written by Dorin O. Neacsu and published by CRC Press. This book was released on 2017-12-19 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: An examination of all of the multidisciplinary aspects of medium- and high-power converter systems, including basic power electronics, digital control and hardware, sensors, analog preprocessing of signals, protection devices and fault management, and pulse-width-modulation (PWM) algorithms, Switching Power Converters: Medium and High Power, Second Edition discusses the actual use of industrial technology and its related subassemblies and components, covering facets of implementation otherwise overlooked by theoretical textbooks. The updated Second Edition contains many new figures, as well as new and/or improved chapters on: Thermal management and reliability Intelligent power modules AC/DC and DC/AC current source converters Multilevel converters Use of IPM within a "network of switches" concept Power semiconductors Matrix converters Practical aspects in building power converters Providing the latest research and development information, along with numerous examples of successful home appliance, aviation, naval, automotive electronics, industrial motor drive, and grid interface for renewable energy products, this edition highlights advancements in packaging technologies, tackles the advent of hybrid circuits able to incorporate control and power stages within the same package, and examines design for reliability from the system level perspective.