Download or read book Preparation and Properties of Thin Films written by K. N. Tu and published by Elsevier. This book was released on 2013-10-22 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treatise on Materials Science and Technology, Volume 24: Preparation and Properties of Thin Films covers the progress made in the preparation of thin films and the corresponding study of their properties. The book discusses the preparation and property correlations in thin film; the variation of microstructure of thin films; and the molecular beam epitaxy of superlattices in thin film. The text also describes the epitaxial growth of silicon structures (thermal-, laser-, and electron-beam-induced); the characterization of grain boundaries in bicrystalline thin films; and the mechanical properties of thin films on substrates. The ion beam modification of thin film; the use of thin alloy films for metallization in microelectronic devices; and the fabrication and physical properties of ultrasmall structures are also encompassed. Materials scientists and materials engineers will find the book invaluable.

Download or read book Thin metal films on weakly interacting substrates written by Andreas Jamnig and published by Linköping University Electronic Press. This book was released on 2020-09-30 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vapor-based growth of thin metal films with controlled morphology on weakly-interacting substrates (WIS), including oxides and van der Waals materials, is essential for the fabrication of multifunctional metal contacts in a wide array of optoelectronic devices. Achieving this entails a great challenge, since weak film/substrate interactions yield a pronounced and uncontrolled 3D morphology. Moreover, the far-from-equilibrium nature of vapor-based film growth often leads to generation of mechanical stress, which may further compromise device reliability and functionality. The objectives of this thesis are related to metal film growth on WIS and seek to: (i) contribute to the understanding of atomic-scale processes that control film morphological evolution; (ii) elucidate the dynamic competition between nanoscale processes that govern film stress generation and evolution; and (iii) develop methodologies for manipulating and controlling nanoscale film morphology between 2D and 3D. Investigations focus on magnetron sputter-deposited Ag and Cu films on SiO2 and amorphous carbon (a-C) substrates. Research is conducted by strategically combining of in situ and real-time film growth monitoring, ex situ chemical and (micro)-structural analysis, optical modelling, and deterministic growth simulations. In the first part, the scaling behavior of characteristic morphological transition thicknesses (i.e., percolation and continuous film formation thickness) during growth of Ag and Cu films on a-C are established as function of deposition rate and temperature. These data are interpreted using a theoretical framework based on the droplet growth theory and the kinetic freezing model for island coalescence, from which the diffusion rates of film forming species during Ag and Cu growth are estimated. By combining experimental data with ab initio molecular dynamics simulations, diffusion of multiatomic clusters, rather than monomers, is identified as the rate-limiting structure-forming process. In the second part, the effect of minority metallic or gaseous species (Cu, N2, O2) on Ag film morphological evolution on SiO2 is studied. By employing in situ spectroscopic ellipsometry, it is found that addition of minority species at the film growth front promotes 2D morphology, but also yields an increased continuous-layer resistivity. Ex situ analyses show that 2D morphology is favored because minority species hinder the rate of coalescence completion. Hence, a novel growth manipulation strategy is compiled in which minority species are deployed with high temporal precision to selectively target specific film growth stages and achieve 2D morphology, while retaining opto-electronic properties of pure Ag films. In the third part, the evolution of stress during Ag and Cu film growth on a-C and its dependence on growth kinetics (as determined by deposition rate, substrate temperature) is systematically investigated. A general trend toward smaller compressive stress magnitudes with increasing temperature/deposition rate is found, related to increasing grain size/decreasing adatom diffusion length. Exception to this trend is found for Cu films, in which oxygen incorporation from the residual growth atmosphere at low deposition rates inhibits adatom diffusivity and decreases the magnitude of compressive stress. The effect of N2 on stress type and magnitude in Ag films is also studied. While Ag grown in N2-free atmosphere exhibits a typical compressive-tensile-compressive stress evolution as function of thickness, addition of a few percent of N2 yields to a stress turnaround from compressive to tensile stress after film continuity which is attributed to giant grain growth and film roughening. The overall results of the thesis provide the foundation to: (i) determine diffusion rates over a wide range of WIS film/substrates systems; (ii) design non-invasive strategies for multifunctional contacts in optoelectronic devices; (iii) complete important missing pieces in the fundamental understanding of stress, which can be used to expand theoretical descriptions for predicting and tuning stress magnitude. La morphologie de films minces métalliques polycristallins élaborés par condensation d’une phase vapeur sur des substrats à faible interaction (SFI) possède un caractère 3D intrinsèque. De plus, la nature hors équilibre de la croissance du film depuis une phase vapeur conduit souvent à la génération de contraintes mécaniques, ce qui peut compromettre davantage la fiabilité et la fonctionnalité des dispositifs optoélectroniques. Les objectifs de cette thèse sont liés à la croissance de films métalliques sur SFI et visent à: (i) contribuer à une meilleure compréhension des processus à l'échelle atomique qui contrôlent l'évolution morphologique des films; (ii) élucider les processus dynamiques qui régissent la génération et l'évolution des contraintes en cours de croissance; et (iii) développer des méthodologies pour manipuler et contrôler la morphologie des films à l'échelle nanométrique. L’originalité de l’approche mise en œuvre consiste à suivre la croissance des films in situ et en temps réel par couplage de plusieurs diagnostics, complété par des analyses microstructurales ex situ. Les grandeurs mesurées sont confrontées à des modèles optiques et des simulations atomistiques. La première partie est consacrée à une étude de comportement d’échelonnement des épaisseurs de transition morphologiques caractéristiques, à savoir la percolation et la continuité du film, lors de la croissance de films polycristallins d'Ag et de Cu sur carbone amorphe (a-C). Ces grandeurs sont examinées de façon systématique en fonction de la vitesse de dépôt et de la température du substrat, et interprétées dans le cadre de la théorie de la croissance de gouttelettes suivant un modèle cinétique décrivant la coalescence d’îlots, à partir duquel les coefficients de diffusion des espèces métalliques sont estimés. En confrontant les données expérimentales à des simulations par dynamique moléculaire ab initio, la diffusion de clusters multiatomiques est identifiée comme l’étape limitante le processus de croissance. Dans la seconde partie, l’incorporation, et l’impact sur la morphologie, d’espèces métalliques ou gazeuses minoritaires (Cu, N2, O2) lors de la croissance de film Ag sur SiO2 est étudié. A partir de mesures ellipsométriques in situ, on constate que l'addition d'espèces minoritaires favorise une morphologie 2D, entravant le taux d'achèvement de la coalescence, mais donne également une résistivité accrue de la couche continue. Par conséquent, une stratégie de manipulation de la croissance est proposée dans laquelle des espèces minoritaires sont déployées avec une grande précision temporelle pour cibler sélectivement des stades de croissance de film spécifiques et obtenir une morphologie 2D, tout en conservant les propriétés optoélectroniques des films d’Ag pur. Dans la troisième partie, l'évolution des contraintes résiduelles lors de la croissance des films d'Ag et de Cu sur a-C et leur dépendance à la cinétique de croissance est systématiquement étudiée. On observe une tendance générale vers des amplitudes de contrainte de compression plus faibles avec une augmentation de la température/vitesse de dépôt, liée à l'augmentation de la taille des grains/à la diminution de la longueur de diffusion des adatomes. Également, l’ajout dans le plasma de N2 sur le type et l'amplitude des contraintes dans les films d'Ag est étudié. L'ajout de quelques pourcents de N2 en phase gaz donne lieu à un renversement de la contrainte de compression et une évolution en tension au-delà de la continuité du film. Cet effet est attribué à une croissance anormale des grains géants et le développement de rugosité de surface. L’ensemble des résultats obtenus dans cette thèse fournissent les bases pour: (i) déterminer les coefficients de diffusion sur une large gamme de systèmes films/SFI; (ii) concevoir des stratégies non invasives pour les contacts multifonctionnels dans les dispositifs optoélectroniques; (iii) apporter des éléments de compréhension à l’origine du développement de contrainte, qui permettent de prédire et contrôler le niveau de contrainte intrinsèque à la croissance de films minces polycristallins.

Download or read book Structure and Electronic Properties of Ultrathin In Films on Si 111 written by Shigemi Terakawa and published by Springer Nature. This book was released on 2022-11-07 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports the establishment of a single-atomic layer metal of In and a novel (In, Mg) ultrathin film on Si(111) surfaces. A double-layer phase of In called “rect” has been extensively investigated as a two-dimensional metal. Another crystalline phase called “hex” was also suggested, but it had not been established due to difficulty in preparing the sample. The author succeeded in growing the large and high-quality sample of the hex phase and revealed that it is a single-layer metal. The author also established a new triple-atomic layer (In, Mg) film with a nearly freestanding character by Mg deposition onto the In double layer. This work proposes a novel method to decouple ultrathin metal films from Si dangling bonds. The present study demonstrates interesting properties of indium itself, which is a p-block metal both with metallicity and covalency. In this book, readers also see principles of various surface analysis techniques and learn how to use them and analyze the results in the real systems. This book is useful to researchers and students interested in surface science, particularly ultrathin metal films on semiconductor surfaces.

Download or read book Physics of Thin Films written by Georg Hass and published by Elsevier. This book was released on 2013-10-22 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physics of Thin Films: Advances in Research and Development, Volume 7 is a collection of papers about film growth and structure, optical properties, and semiconducting films. The book covers topics such as diffraction theory; film support and filter fabrication; aging, usage, and cleaning of filters; and properties and applications of III-V compound films. It also discusses topics such as the preparation of use and unbacked metal filters; electromigration in thin films; and the built-up molecular films and their applications. The text is recommended for physicists and engineers involved in thin film physics, especially those who would like to know more about the progresses in the field.

Download or read book Thin Films On Silicon Electronic And Photonic Applications written by Vijay Narayanan and published by World Scientific. This book was released on 2016-08-15 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides a broad overview of the fundamental materials science of thin films that use silicon as an active substrate or passive template, with an emphasis on opportunities and challenges for practical applications in electronics and photonics. It covers three materials classes on silicon: Semiconductors such as undoped and doped Si and SiGe, SiC, GaN, and III-V arsenides and phosphides; dielectrics including silicon nitride and high-k, low-k, and electro-optically active oxides; and metals, in particular silicide alloys. The impact of film growth and integration on physical, electrical, and optical properties, and ultimately device performance, is highlighted.

Download or read book Rare Earth Oxide Thin Films written by Marco Fanciulli and published by Springer. This book was released on 2009-09-02 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin rare earth (RE) oxide films are emerging materials for microelectronic, nanoelectronic, and spintronic applications. The state-of-the-art of thin film deposition techniques as well as the structural, physical, chemical, and electrical properties of thin RE oxide films and of their interface with semiconducting substrates are discussed. The aim is to identify proper methodologies for the development of RE oxides thin films and to evaluate their effectiveness as innovative materials in different applications.

Download or read book Thin Films and Heterostructures for Oxide Electronics written by Satishchandra B. Ogale and published by Springer Science & Business Media. This book was released on 2005-11-21 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxides form a broad subject area of research and technology development which encompasses different disciplines such as materials science, solid state chemistry, physics etc. The aim of this book is to demonstrate the interplay of these fields and to provide an introduction to the techniques and methodologies involving film growth, characterization and device processing. The literature in this field is thus fairly scattered in different research journals covering one or the other aspect of the specific activity. This situation calls for a book that will consolidate this information and thus enable a beginner as well as an expert to get an overall perspective of the field, its foundations, and its projected progress.

Download or read book Thin Film Physics And Devices Fundamental Mechanism Materials And Applications For Thin Films written by Jianguo Zhu and published by World Scientific. This book was released on 2021-06-18 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin films have an extremely broad range of applications from electronics and optics to new materials and devices. Collaborative and multidisciplinary efforts from physicists, materials scientists, engineers and others have established and advanced a field with key pillars constituting (i) the synthesis and processing of thin films, (ii) the understanding of physical properties in relation to the nanometer scale, (iii) the design and fabrication of nano-devices or devices with thin film materials as building blocks, and (iv) the design and construction of novel tools for characterization of thin films.Against the backdrop of the increasingly interdisciplinary field, this book sets off to inform the basics of thin film physics and thin film devices. Readers are systematically introduced to the synthesis, processing and application of thin films; they will also study the formation of thin films, their structure and defects, and their various properties — mechanical, electrical, semiconducting, magnetic, and superconducting. With a primary focus on inorganic thin film materials, the book also ventures on organic materials such as self-assembled monolayers and Langmuir-Blodgett films.This book will be effective as a teaching or reference material in the various disciplines, ranging from Materials Science and Engineering, Electronic Science and Engineering, Electronic Materials and Components, Semiconductor Physics and Devices, to Applied Physics and more. The original Chinese publication has been instrumental in this purpose across many Chinese universities and colleges.

Download or read book Thin Films and Coatings written by B. M. Caruta and published by Nova Publishers. This book was released on 2005 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The broad field of thin film technology is based first of all on the film growth processes in general. The concepts of crystal structure and defects in crystalline thin films such as grain boundaries, dislocations and vacancies are examined. The general nature of film growth from atoms equilibrating with the service, through the initial stages of growth to film coalescence and zone models is also within the scope of this book as are evaporation, sputter deposition and chemical vapour deposition. Thin films are widely used in microelectronics, chemistry and a wide array of related fields. This book offers new research in this exploding field.

Download or read book Metal Based Thin Films for Electronics written by Klaus Wetzig and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This up-to-date handbook covers the main topics of preparation, characterization and properties of complex metal-based layer systems. The authors -- an outstanding group of researchers -- discuss advanced methods for structure, chemical and electronic state characterization with reference to the properties of thin functional layers, such as metallization and barrier layers for microelectronics, magnetoresistive layers for GMR and TMR, sensor and resistance layers. As such, the book addresses materials specialists in industry, especially in microelectronics, as well as scientists, and can also be recommended for advanced studies in materials science, analytics, surface and solid state science.

Download or read book Thin Films written by Fatma Sarf and published by BoD – Books on Demand. This book was released on 2024-01-17 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the growth of nanomaterials as thin films. It covers the recent development of thin films using different techniques, such as electrodeposition. It also discusses the widespread use of electrochemical and magnetic applications. This book brings together multidisciplinary chapters written by leading specialists in the field.

Download or read book Interface Controlled Organic Thin Films written by Horst-Günter Rubahn and published by Springer Science & Business Media. This book was released on 2009-06-12 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic semiconductors are a central topic of advanced materials research. The book is aiming at bridging the gap between the development and production of devices and basic research on thin film characterisation using cutting-edge techniques in surface and interface science. Topics involve organic molecular-based sensors; interfaces in organic diodes and transistors; mobility in organic field effect transistors and space charge problems; integration of optoelectronic nanostructures; nonlinear optical properties of organic nanostructures; the wetting layer problem; how to get from functionalized molecules to nanoaggregates; optical, electrical and mechanical properties of organic nanofibers as well; as near field investigations of organic thin films.

Download or read book Thin Film Growth Techniques for Low Dimensional Structures written by R.F.C. Farrow and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work represents the account of a NATO Advanced Research Workshop on "Thin Film Growth Techniques for Low Dimensional Structures", held at the University of Sussex, Brighton, England from 15-19 Sept. 1986. The objective of the workshop was to review the problems of the growth and characterisation of thin semiconductor and metal layers. Recent advances in deposition techniques have made it possible to design new material which is based on ultra-thin layers and this is now posing challenges for scientists, technologists and engineers in the assessment and utilisation of such new material. Molecular beam epitaxy (MBE) has become well established as a method for growing thin single crystal layers of semiconductors. Until recently, MBE was confined to the growth of III-V compounds and alloys, but now it is being used for group IV semiconductors and II-VI compounds. Examples of such work are given in this volume. MBE has one major advantage over other crystal growth techniques in that the structure of the growing layer can be continuously monitored using reflection high energy electron diffraction (RHEED). This technique has offered a rare bonus in that the time dependent intensity variations of RHEED can be used to determine growth rates and alloy composition rather precisely. Indeed, a great deal of new information about the kinetics of crystal growth from the vapour phase is beginning to emerge.

Download or read book Mechanisms of Thin Film Evolution Volume 317 written by Steven M. Yalisove and published by . This book was released on 1994-05-11 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners.

Download or read book Multicomponent and Multilayered Thin Films for Advanced Microtechnologies Techniques Fundamentals and Devices written by O. Auciello and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: The synthesis of multicomponent/multilayered superconducting, conducting, semiconducting and insulating thin films has become the subject of an intensive, worldwide, interdisciplinary research effort. The development of deposition-characterization techniques and the science and technology related to the synthesis of these films are critical for the successful evolution of this interdisciplinary field of research and the implementation of the new materials in a whole new generation of advanced microdevices. This book contains the lectures and contributed papers on various scientific and technological aspects of multicomponent and multilayered thin films presented at a NATO/ASI. Compared to other recent books on thin films, the distinctive character of this book is the interdisciplinary treatment of the various fields of research related to the different thin film materials mentioned above. The wide range of topics discussed in this book include vacuum-deposition techniques, synthesis-processing, characterization, and devices of multicomponent/multilayered oxide high temperature superconducting, ferroelectric, electro-optic, optical, metallic, silicide, and compound semiconductor thin films. The book presents an unusual intedisciplinary exchange of ideas between researchers with cross-disciplinary backgrounds and it will be useful to established investigators as well as postdoctoral and graduate students.

Download or read book Thin Films for Advanced Electronic Devices written by Maurice H. Francombe and published by Academic Press. This book was released on 2013-10-22 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this volume of the highly esteemed Physics of Thin Films serial, focused coverage is given to new trends in solid state devices. Four chapters combine to provide comprehensive discussions of magnetostatic wave phenomena in epitaxial magnetic oxide films and their applications in microwave signal processing devices: Thin-film rare earth transition metal alloys for magnetooptic recording. Two new classes of quantum well structures that have been used for infrared detectors and ultrafast resonant tunneling devices. Recent applications of Fourier transform spectroscopy for the analysis of inorganic thin solid films. This book provides a focused treatment of recent developments in novel thin film solid state components, and specifically discusses magnetic, semiconducting, and optical phenomena.

Download or read book Metalorganic Vapor Phase Epitaxy MOVPE written by Stuart Irvine and published by John Wiley & Sons. This book was released on 2019-08-27 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systematically discusses the growth method, material properties, and applications for key semiconductor materials MOVPE is a chemical vapor deposition technique that produces single or polycrystalline thin films. As one of the key epitaxial growth technologies, it produces layers that form the basis of many optoelectronic components including mobile phone components (GaAs), semiconductor lasers and LEDs (III-Vs, nitrides), optical communications (oxides), infrared detectors, photovoltaics (II-IV materials), etc. Featuring contributions by an international group of academics and industrialists, this book looks at the fundamentals of MOVPE and the key areas of equipment/safety, precursor chemicals, and growth monitoring. It covers the most important materials from III-V and II-VI compounds to quantum dots and nanowires, including sulfides and selenides and oxides/ceramics. Sections in every chapter of Metalorganic Vapor Phase Epitaxy (MOVPE): Growth, Materials Properties and Applications cover the growth of the particular materials system, the properties of the resultant material, and its applications. The book offers information on arsenides, phosphides, and antimonides; nitrides; lattice-mismatched growth; CdTe, MCT (mercury cadmium telluride); ZnO and related materials; equipment and safety; and more. It also offers a chapter that looks at the future of the technique. Covers, in order, the growth method, material properties, and applications for each material Includes chapters on the fundamentals of MOVPE and the key areas of equipment/safety, precursor chemicals, and growth monitoring Looks at important materials such as III-V and II-VI compounds, quantum dots, and nanowires Provides topical and wide-ranging coverage from well-known authors in the field Part of the Materials for Electronic and Optoelectronic Applications series Metalorganic Vapor Phase Epitaxy (MOVPE): Growth, Materials Properties and Applications is an excellent book for graduate students, researchers in academia and industry, as well as specialist courses at undergraduate/postgraduate level in the area of epitaxial growth (MOVPE/ MOCVD/ MBE).