Download or read book Investigating the Effects of Pdn Cluster Size and the Alumina Support Thickness on the Electronic Structure Geometry and Catalytic Activity Probed Via the Co Oxidation Reaction written by Matthew David Kane and published by . This book was released on 2014 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Strong Metal support Interactions written by R. T. K. Baker and published by . This book was released on 1986 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Oxide Supported Au Pd Nanoparticles for CO Oxidation Reaction written by Venkatesan Dhanasekaran and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Au-Pd bimetallic nanoparticles (NPs) have been studied for their catalytic activity in CO oxidation reaction. The preparation technique, size and composition of the nanoparticles have great impact on the catalytic behaviour of the system. Here, 3 and 5nm diameter Au1-xPdx (x = 0, 0.25, 0.5, 0.75, 1) nanoparticles were employed to study the effect of size and composition. The samples were synthesized by micelle nanolithography, a technique well adapted to yield narrow size distribution of nanoparticles. To achieve monodisperse metal-loaded micelles on SiO2/Si(001) substrates we employed spin-coating and observe quasi-hexagonal ordered micelles in SEM. Oxygen or hydrogen plasma were used to remove the polymer, reduce the metal ions and enable nanoparticle formation. We made a systematic approach to study the effect of plasma on the structure and morphology of the NPs by means of surface x-ray scattering techniques. The oxidation behavior and CO oxidation activity of the Au1-xPdx NPs were studied at 300°C and 0.5 bar in the flow reactor XCAT available at the SixS Beamline, Synchrotron SOLEIL, France. The CO oxidation activity measurements showed that the NPs prepared using the oxygen plasma present higher CO2 conversion rate than the NPs prepared using hydrogen plasma for a given composition. The Pd nanoparticles prepared using O2 plasma were found to be the most active catalyst: no synergetic effects were observed for bimetallic nanoparticles for the CO oxidation reaction.
Download or read book Defects at Oxide Surfaces written by Jacques Jupille and published by Springer. This book was released on 2015-02-09 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basics and characterization of defects at oxide surfaces. It provides a state-of-the-art review of the field, containing information to the various types of surface defects, describes analytical methods to study defects, their chemical activity and the catalytic reactivity of oxides. Numerical simulations of defective structures complete the picture developed. Defects on planar surfaces form the focus of much of the book, although the investigation of powder samples also form an important part. The experimental study of planar surfaces opens the possibility of applying the large armoury of techniques that have been developed over the last half-century to study surfaces in ultra-high vacuum. This enables the acquisition of atomic level data under well-controlled conditions, providing a stringent test of theoretical methods. The latter can then be more reliably applied to systems such as nanoparticles for which accurate methods of characterization of structure and electronic properties have yet to be developed. The book gives guidance to tailor oxide surfaces by controlling the nature and concentration of defects. The importance of defects in the physics and chemistry of metal oxide surfaces is presented in this book together with the prominent role of oxides in common life. The book contains contributions from leaders in the field. It serves as a reference for experts and beginners in the field.
Download or read book Computational Catalysis written by Aravind Asthagiri and published by Royal Society of Chemistry. This book was released on 2014 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive review of the methods and approaches being adopted to push forward the boundaries of computational catalysis.
Download or read book Sinter resistant Gold 144 Iron III Oxide Core shell Structures written by Michelle E. Lukosi and published by . This book was released on 2017 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the realm of catalysis, small nanoparticles have been an area of interest due to their high surface-to-volume ratio. This is even more so with gold nanoparticles in that gold only becomes catalytically active with small particles sizes. Thus, gold clusters are desirable given their uniformity, high surface-to-volume ratio, and high catalytic activity. Given the nature of small gold particles to sinter, it was found to be advantageous to protect the particles using a gold-metal oxide core-shell configuration. Core-shell heterostructures have been utilized as a catalyst that is thermally stable and exhibits a synergistic effect between core and shell, resulting in increased catalytic activity. The research contained in this document discusses the synthetic procedure of a gold-144 cluster using a variation of the Brust-Schiffrin method followed by an iron oxide coating via post-selective oxidative treatment to create a gold-144 iron oxide core-shell structure. Shell thickness is varied depending on the amount of iron precursor used and studied under the particle's catalytic efficiency with carbon monoxide oxidation. The gold- 144 iron oxide particles with Au:Fe mass ratios of 1:2, 1:4, and 1:6 were synthesized and then deposited onto silica via colloidal deposition. Using CO oxidation, each gold-144 iron oxide catalyst loaded onto silica gave varying degrees of full CO conversion depending on the thickness of the iron oxide layer. The 1:4 gold-144 iron oxide catalyst produced the best catalytic activity and was further investigated using 2-propanol conversion as well as thermal treatments using CO oxidation. Under CO oxidation, the 1:4 structure calcined at 300 degrees Celsius presented the best results, and the 1:4 ratio was still active at 100 degrees Celsius after thermal treatments. Under 2-propanol conversions, the data seems to suggest that core-shell structure provides a synergistic effect for acetone production, however, this cannot be concluded until further testing is accomplished.
Download or read book Nanocatalysis written by Ulrich Heiz and published by Springer Science & Business Media. This book was released on 2007-01-10 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocatalysis, a subdiscipline of nanoscience, seeks to control chemical reactions by changing the size, dimensionality, chemical composition, and morphology of the reaction center and by changing the kinetics using nanopatterning of the reaction center. This book offers a detailed pedagogical and methodological overview of the field. Readers discover many examples of current research, helping them explore new and emerging applications.
Download or read book The Chemical Reactor from Laboratory to Industrial Plant written by Elio Santacesaria and published by Springer. This book was released on 2018-11-04 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: This graduate textbook, written by a former lecturer, addresses industrial chemical reaction topics, focusing on the commercial-scale exploitation of chemical reactions. It introduces students to the concepts behind the successful design and operation of chemical reactors, with an emphasis on qualitative arguments, simple design methods, graphical procedures, and frequent comparison of capabilities of the major reactor types. It starts by discussing simple ideas before moving on to more advanced concepts with the support of numerous case studies. Many simple and advanced exercises are present in each chapter and the detailed MATLAB code for their solution is available to the reader as supplementary material on Springer website. It is written for MSc chemical engineering students and novice researchers working in industrial laboratories.
Download or read book The Mizoroki Heck Reaction written by Martin Oestreich and published by John Wiley & Sons. This book was released on 2009-02-11 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exploring the importance of Richard F. Heck’s carbon coupling reaction, this book highlights the subject of the 2010 Nobel Prize in Chemistry for palladium-catalyzed cross couplings in organic synthesis, and includes a foreword from Nobel Prize winner Richard F. Heck. The Mizoroki-Heck reaction is a palladium-catalyzed carbon–carbon bond forming process which is widely used in organic and organometallic synthesis. It has seen increasing use in the past decade as chemists look for strategies enabling the controlled construction of complex carbon skeletons. The Mizoroki-Heck Reaction is the first dedicated volume on this important reaction, including topics on: mechanisms of the Mizoroki-Heck reaction intermolecular Mizoroki-Heck reactions focus on regioselectivity and product outcome in organic synthesis waste-minimized Mizoroki-Heck reactions intramolecular Mizoroki-Heck reactions formation of heterocycles chelation-controlled Mizoroki-Heck reactions the Mizoroki-Heck reaction in domino processes oxidative heck-type reactions (Fujiwara-Moritani reactions) Mizoroki-Heck reactions with metals other than palladium ligand design for intermolecular asymmetric Mizoroki-Heck reactions intramolecular enantioselective Mizoroki-Heck reactions desymmetrizing Mizoroki-Heck reactions applications in combinatorial and solid phase syntheses, and the development of modern solvent systems and reaction techniques the asymmetric intramolecular Mizoroki-Heck reaction in natural product total synthesis Several chapters are devoted to asymmetric Heck reactions with particular focus on the construction of otherwise difficult-to-obtain sterically congested tertiary and quaternary carbons. Industrial and academic applications are highlighted in the final section. The Mizoroki-Heck Reaction will find a place on the bookshelves of any organic or organometallic chemist. “I am convinced that this book will rapidly become the most important reference text for research chemists in academia and industry who seek orientation in the rapidly growing and – for the layman – confusing field described as the “’Mizoroki–Heck reaction’.” (Synthesis, March 2010)
Download or read book Oxide Ultrathin Films written by Gianfranco Pacchioni and published by John Wiley & Sons. This book was released on 2012-09-19 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wealth of information in one accessible book. Written by international experts from multidisciplinary fields, this in-depth exploration of oxide ultrathin films covers all aspects of these systems, starting with preparation and characterization, and going on to geometrical and electronic structure, as well as applications in current and future systems and devices. From the Contents: Synthesis and Preparation of Oxide Ultrathin Films Characterization Tools of Oxide Ultrathin Films Ordered Oxide Nanostructures on Metal Surfaces Unusual Properties of Oxides and Other Insulators in the Ultrathin Limit Silica and High-K Dielectrics Thin Films in Microelectronics Oxide Passive Films and Corrosion Protection Oxide Films as Catalytic Materials and as Models of Real Catalysts Oxide Films in Spintronics Oxide Ultrathin Films in Solid Oxide Fuel Cells Transparent Conducting and Chromogenic Oxide Films as Solar Energy Materials Oxide Ultrathin Films in Sensor Applications Ferroelectricity in Ultrathin Film Capacitors Titania Thin Films in Biocompatible Materials and Medical Implants Oxide Nanowires for New Chemical Sensor Devices
Download or read book Handbook of Essential Oils written by K. Husnu Can Baser and published by CRC Press. This book was released on 2009-12-28 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt: Egyptian hieroglyphs, Chinese scrolls, and Ayurvedic literature record physicians administering aromatic oils to their patients. Today society looks to science to document health choices and the oils do not disappoint. The growing body of evidence of their efficacy for more than just scenting a room underscores the need for production standards, quality control parameters for raw materials and finished products, and well-defined Good Manufacturing Practices. Edited by two renowned experts, the Handbook of Essential Oils covers all aspects of essential oils from chemistry, pharmacology, and biological activity, to production and trade, to uses and regulation. Bringing together significant research and market profiles, this comprehensive handbook provides a much-needed compilation of information related to the development, use, and marketing of essential oils, including their chemistry and biochemistry. A select group of authoritative experts explores the historical, biological, regulatory, and microbial aspects. This reference also covers sources, production, analysis, storage, and transport of oils as well as aromatherapy, pharmacology, toxicology, and metabolism. It includes discussions of biological activity testing, results of antimicrobial and antioxidant tests, and penetration-enhancing activities useful in drug delivery. New information on essential oils may lead to an increased understanding of their multidimensional uses and better, more ecologically friendly production methods. Reflecting the immense developments in scientific knowledge available on essential oils, this book brings multidisciplinary coverage of essential oils into one all-inclusive resource.
Download or read book Metal Organic Frameworks as Heterogeneous Catalysts written by Francesc X. Llabrés i Xamena and published by Royal Society of Chemistry. This book was released on 2013-07-01 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the latest research and discovery in the use of MOFs in catalysis, highlighting the extent to which these materials have been embraced by the community.
Download or read book Heterogeneous Catalysis for the Synthetic Chemist written by Robert L. Augustine and published by CRC Press. This book was released on 2020-08-11 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work delineates the effect of different reaction variables on the outcome of heterogeneously catalyzed reactions, and explains how to optimize the product yield of specific compounds. Metal catalysis, simple and complex oxides, zeolites and clays are discussed, both as catalysts and as potential supports for catalytically active metals.
Download or read book Aberration Corrected Analytical Transmission Electron Microscopy written by Rik Brydson and published by John Wiley & Sons. This book was released on 2011-08-02 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is concerned with the theory, background, and practical use of transmission electron microscopes with lens correctors that can correct the effects of spherical aberration. The book also covers a comparison with aberration correction in the TEM and applications of analytical aberration corrected STEM in materials science and biology. This book is essential for microscopists involved in nanoscale and materials microanalysis especially those using scanning transmission electron microscopy, and related analytical techniques such as electron diffraction x-ray spectrometry (EDXS) and electron energy loss spectroscopy (EELS).
Download or read book Oxide Surfaces written by and published by Elsevier. This book was released on 2001-05-21 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a multi-author survey (in 15 chapters) of the current state of knowledge and recent developments in our understanding of oxide surfaces. The author list includes most of the acknowledged world experts in this field. The material covered includes fundamental theory and experimental studies of the geometrical, vibrational and electronic structure of such surfaces, but with a special emphasis on the chemical properties and associated reactivity. The main focus is on metal oxides but coverage extends from 'simple' rocksalt materials such as MgO through to complex transition metal oxides with different valencies.
Download or read book Long Acting Injections and Implants written by Jeremy C. Wright and published by Springer Science & Business Media. This book was released on 2012-01-29 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Long acting injections and implants improve therapy, enhance patient compliance, improve dosing convenience, and are the most appropriate formulation choice for drugs that undergo extensive first pass metabolism or that exhibit poor oral bioavailability. An intriguing variety of technologies have been developed to provide long acting injections and implants. Many considerations need to go into the design of these systems in order to translate a concept from the lab bench to actual therapy for a patient. This book surveys and summarizes the field. Topics covered in Long Acting Injections and Implants include the historical development of the field, drugs, diseases and clinical applications for long acting injections and implants, anatomy and physiology for these systems, specific injectable technologies (including lipophilic solutions, aqueous suspensions, microspheres, liposomes, in situ forming depots and self-assembling lipid formulations), specific implantable technologies (including osmotic implants, drug eluting stents and microfabricated systems), peptide, protein and vaccine delivery, sterilization, drug release testing and regulatory aspects of long acting injections and implants. This volume provides essential information for experienced development professionals but was also written to be useful for scientists just beginning work in the field and for others who need an understanding of long acting injections and implants. This book will also be ideal as a graduate textbook.
Download or read book Modern Electroplating written by Mordechay Schlesinger and published by John Wiley & Sons. This book was released on 2011-02-14 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive resource for electroplating, now completely up to date With advances in information-age technologies, the field of electroplating has seen dramatic growth in the decade since the previous edition of Modern Electroplating was published. This expanded new edition addresses these developments, providing a comprehensive, one-stop reference to the latest methods and applications of electroplating of metals, alloys, semiconductors, and conductive polymers. With special emphasis on electroplating and electrochemical plating in nanotechnologies, data storage, and medical applications, the Fifth Edition boasts vast amounts of new and revised material, unmatched in breadth and depth by any other book on the subject. It includes: Easily accessible, self-contained contributions by over thirty experts Five completely new chapters and hundreds of additional pages A cutting-edge look at applications in nanoelectronics Coverage of the formation of nanoclusters and quantum dots using scanning tunneling microscopy (STM) An important discussion of the physical properties of metal thin films Chapters devoted to methods, tools, control, and environmental issues And much more A must-have for anyone in electroplating, including technicians, platers, plating researchers, and metal finishers, Modern Electroplating, Fifth Edition is also an excellent reference for electrical engineers and researchers in the automotive, data storage, and medical industries.
