Download or read book Inverse Heat Conduction and Heat Exchangers written by Suvanjan Bhattacharyya and published by BoD – Books on Demand. This book was released on 2020-12-02 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: A direct solution of the heat conduction equation with prescribed initial and boundary conditions yields temperature distribution inside a specimen. The direct solution is mathematically considered as a well-posed one because the solution exists, is unique, and continuously depends on input data. The estimation of unknown parameters from the measured temperature data is known as the inverse problem of heat conduction. An error in temperature measurement, thermal time lagging, thermocouple-cavity, or signal noise data makes stability a problem in the estimation of unknown parameters. The solution of the inverse problem can be obtained by employing the gradient or non-gradient based inverse algorithm. The aim of this book is to analyze the inverse problem and heat exchanger applications in the fields of aerospace, mechanical, applied mechanics, environment sciences, and engineering.
Download or read book Inverse Heat Conduction written by James V. Beck and published by James Beck. This book was released on 1985-10-02 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is the only commercially published work to deal with the engineering problem of determining surface heat flux and temperature history based on interior temperature measurements. Provides the analytical techniques needed to arrive at otherwise difficult solutions, summarizing the findings of the last ten years. Topics include the steady state solution, Duhamel's Theorem, ill-posed problems, single future time step, and more.
Download or read book Inverse Heat Transfer written by M. Necat Ozisik and published by Routledge. This book was released on 2018-05-02 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the fundamental concepts of inverse heat transfer problems. It presents in detail the basic steps of four techniques of inverse heat transfer protocol, as a parameter estimation approach and as a function estimation approach. These techniques are then applied to the solution of the problems of practical engineering interest involving conduction, convection, and radiation. The text also introduces a formulation based on generalized coordinates for the solution of inverse heat conduction problems in two-dimensional regions.
Download or read book Inverse Heat Conduction written by Hamidreza Najafi and published by John Wiley & Sons. This book was released on 2023-03-02 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inverse Heat Conduction A comprehensive reference on the field of inverse heat conduction problems (IHCPs), now including advanced topics, numerous practical examples, and downloadable MATLAB codes. The First Edition of the classic book Inverse Heat Conduction: III-Posed Problems, published in 1985, has been used as one of the primary references for researchers and professionals working on IHCPs due to its comprehensive scope and dedication to the topic. The Second Edition of the book is a largely revised version of the First Edition with several all-new chapters and significant enhancement of the previous material. Over the past 30 years, the authors of this Second Edition have collaborated on research projects that form the basis for this book, which can serve as an effective textbook for graduate students and as a reliable reference book for professionals. Examples and problems throughout the text reinforce concepts presented. The Second Edition continues emphasis from the First Edition on linear heat conduction problems with revised presentation of Stolz, Function Specification, and Tikhonov Regularization methods, and expands coverage to include Conjugate Gradient Methods and the Singular Value Decomposition method. The Filter Matrix concept is explained and embraced throughout the presentation and allows any of these solution techniques to be represented in a simple explicit linear form. Two direct approaches suitable for non-linear problems, the Adjoint Method and Kalman Filtering, are presented, as well as an adaptation of the Filter Matrix approach applicable to non-linear heat conduction problems. In the Second Edition of Inverse Heat Conduction: III-Posed Problems, readers will find: A comprehensive literature review of IHCP applications in various fields of engineering Exact solutions to several fundamental problems for direct heat conduction problems, the concept of the computational analytical solution, and approximate solution methods for discrete time steps using superposition of exact solutions which form the basis for the IHCP solutions in the text IHCP solution methods and comparison of many of these approaches through a common suite of test problems Filter matrix form of IHCP solution methods and discussion of using filter-form Tikhonov regularization for solving complex IHCPs in multi-layer domain with temperature-dependent material properties Methods and criteria for selection of the optimal degree of regularization in solution of IHCPs Application of the filter concept for solving two-dimensional transient IHCP problems with multiple unknown heat fluxes Estimating the heat transfer coefficient, h, for lumped capacitance body and bodies with temperature gradients Bias in temperature measurements in the IHCP and correcting for temperature measurement bias Inverse Heat Conduction is a must-have resource on the topic for mechanical, aerospace, chemical, biomedical, or metallurgical engineers who are active in the design and analysis of thermal systems within the fields of manufacturing, aerospace, medical, defense, and instrumentation, as well as researchers in the areas of thermal science and computational heat transfer.
Download or read book Solving Direct and Inverse Heat Conduction Problems written by Jan Taler and published by Springer Science & Business Media. This book was released on 2010-04-16 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a solution for direct and inverse heat conduction problems, discussing the theoretical basis for the heat transfer process and presenting selected theoretical and numerical problems in the form of exercises with solutions. The book covers one-, two- and three dimensional problems which are solved by using exact and approximate analytical methods and numerical methods. An accompanying CD-Rom includes computational solutions of the examples and extensive FORTRAN code.
Download or read book Inverse Heat Transfer written by Helcio R.B. Orlande and published by CRC Press. This book was released on 2021-04-20 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the fundamental concepts of inverse heat transfer solutions and their applications for solving problems in convective, conductive, radiative, and multi-physics problems. Inverse Heat Transfer: Fundamentals and Applications, Second Edition includes techniques within the Bayesian framework of statistics for the solution of inverse problems. By modernizing the classic work of the late Professor M. Necati Özisik and adding new examples and problems, this new edition provides a powerful tool for instructors, researchers, and graduate students studying thermal-fluid systems and heat transfer. FEATURES Introduces the fundamental concepts of inverse heat transfer Presents in systematic fashion the basic steps of powerful inverse solution techniques Develops inverse techniques of parameter estimation, function estimation, and state estimation Applies these inverse techniques to the solution of practical inverse heat transfer problems Shows inverse techniques for conduction, convection, radiation, and multi-physics phenomena M. Necati Özisik (1923–2008) retired in 1998 as Professor Emeritus of North Carolina State University’s Mechanical and Aerospace Engineering Department. Helcio R. B. Orlande is a Professor of Mechanical Engineering at the Federal University of Rio de Janeiro (UFRJ), where he was the Department Head from 2006 to 2007.
Download or read book Innovative Heat Exchangers written by Hans-Jörg Bart and published by Springer. This book was released on 2017-12-30 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This accessible book presents unconventional technologies in heat exchanger design that have the capacity to provide solutions to major concerns within the process and power-generating industries. Demonstrating the advantages and limits of these innovative heat exchangers, it also discusses micro- and nanostructure surfaces and micro-scale equipment, and introduces pillow-plate, helical and expanded metal baffle concepts. It offers step-by-step worked examples, which provide instructions for developing an initial configuration and are supported by clear, detailed drawings and pictures. Various types of heat exchangers are available, and they are widely used in all fields of industry for cooling or heating purposes, including in combustion engines. The market in 2012 was estimated to be U$ 42.7 billion and the global demand for heat exchangers is experiencing an annual growth of about 7.8 %. The market value is expected to reach U$ 57.9 billion in 2016, and approach U$ 78.16 billion in 2020. Providing a valuable introduction to students and researchers, this book offers clear and concise information to thermal engineers, mechanical engineers, process engineers and heat exchanger specialists.
Download or read book Direct and Inverse Heat Transfer Problems in Dynamics of Plate and Tube Heat Exchangers written by Dawid Taler and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Conduction written by Vyacheslav Vikhrenko and published by BoD – Books on Demand. This book was released on 2011-11-30 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The content of this book covers several up-to-date approaches in the heat conduction theory such as inverse heat conduction problems, non-linear and non-classic heat conduction equations, coupled thermal and electromagnetic or mechanical effects and numerical methods for solving heat conduction equations as well. The book is comprised of 14 chapters divided into four sections. In the first section inverse heat conduction problems are discuss. The first two chapters of the second section are devoted to construction of analytical solutions of nonlinear heat conduction problems. In the last two chapters of this section wavelike solutions are attained.The third section is devoted to combined effects of heat conduction and electromagnetic interactions in plasmas or in pyroelectric material elastic deformations and hydrodynamics. Two chapters in the last section are dedicated to numerical methods for solving heat conduction problems.
Download or read book Heat Transfer written by Aziz Belmiloudi and published by BoD – Books on Demand. This book was released on 2011-02-14 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past few decades there has been a prolific increase in research and development in area of heat transfer, heat exchangers and their associated technologies. This book is a collection of current research in the above mentioned areas and describes modelling, numerical methods, simulation and information technology with modern ideas and methods to analyse and enhance heat transfer for single and multiphase systems. The topics considered include various basic concepts of heat transfer, the fundamental modes of heat transfer (namely conduction, convection and radiation), thermophysical properties, computational methodologies, control, stabilization and optimization problems, condensation, boiling and freezing, with many real-world problems and important modern applications. The book is divided in four sections : "Inverse, Stabilization and Optimization Problems", "Numerical Methods and Calculations", "Heat Transfer in Mini/Micro Systems", "Energy Transfer and Solid Materials", and each section discusses various issues, methods and applications in accordance with the subjects. The combination of fundamental approach with many important practical applications of current interest will make this book of interest to researchers, scientists, engineers and graduate students in many disciplines, who make use of mathematical modelling, inverse problems, implementation of recently developed numerical methods in this multidisciplinary field as well as to experimental and theoretical researchers in the field of heat and mass transfer.
Download or read book Solving Direct and Inverse Heat Conduction Problems written by Jan Taler and published by Springer. This book was released on 2006-10-18 with total page 889 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a solution for direct and inverse heat conduction problems, discussing the theoretical basis for the heat transfer process and presenting selected theoretical and numerical problems in the form of exercises with solutions. The book covers one-, two- and three dimensional problems which are solved by using exact and approximate analytical methods and numerical methods. An accompanying CD-Rom includes computational solutions of the examples and extensive FORTRAN code.
Download or read book Heat Exchangers written by S. M. Sohel Murshed and published by BoD – Books on Demand. This book was released on 2017-04-27 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting contributions from renowned experts in the field, this book covers research and development in fundamental areas of heat exchangers, which include: design and theoretical development, experiments, numerical modeling and simulations. This book is intended to be a useful reference source and guide to researchers, postgraduate students, and engineers in the fields of heat exchangers, cooling, and thermal management.
Download or read book Numerical Modelling and Experimental Testing of Heat Exchangers written by Dawid Taler and published by Springer. This book was released on 2018-05-17 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents new methods of numerical modelling of tube heat exchangers, which can be used to perform design and operation calculations of exchangers characterized by a complex flow system. It also proposes new heat transfer correlations for laminar, transition and turbulent flows. A large part of the book is devoted to experimental testing of heat exchangers, and methods for assessing the indirect measurement uncertainty are presented. Further, it describes a new method for parallel determination of the Nusselt number correlations on both sides of the tube walls based on the nonlinear least squares method and presents the application of computational fluid dynamic (CFD) modeling to determine the air-side Nusselt number correlations. Lastly, it develops a control system based on the mathematical model of the car radiator and compares this with the digital proportional-integral-derivative (PID) controller. The book is intended for students, academics and researchers, as well as for designers and manufacturers of heat exchangers.
Download or read book Heat Transfer written by Salim Newaz Kazi and published by BoD – Books on Demand. This book was released on 2023-02 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the fundamentals, enhancements, applications, and modeling of heat transfer phenomena. Topics covered include heat transfer equations and applications in the estimation of heat energy transportation, heat transfer in specific applications, microchannel flow, condensation of refrigerants in modified heat exchanger tubes, alteration of tube surface texture for augmentation of heat transfer, boiling, etc. Also considered are fouling mitigation approaches to prolong heat exchanger operation, as well as tube coatings, heat exchanger digital twins, and various surface alteration techniques. Double-pass solar air heating and phenomena including heat transfer through thin liquid film and surface texture alteration for boiling heat transfer are discussed.
Download or read book Developments in Heat Transfer written by Marco Aurelio Dos Santos Bernardes and published by BoD – Books on Demand. This book was released on 2011-09-15 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises heat transfer fundamental concepts and modes (specifically conduction, convection and radiation), bioheat, entransy theory development, micro heat transfer, high temperature applications, turbulent shear flows, mass transfer, heat pipes, design optimization, medical therapies, fiber-optics, heat transfer in surfactant solutions, landmine detection, heat exchangers, radiant floor, packed bed thermal storage systems, inverse space marching method, heat transfer in short slot ducts, freezing an drying mechanisms, variable property effects in heat transfer, heat transfer in electronics and process industries, fission-track thermochronology, combustion, heat transfer in liquid metal flows, human comfort in underground mining, heat transfer on electrical discharge machining and mixing convection. The experimental and theoretical investigations, assessment and enhancement techniques illustrated here aspire to be useful for many researchers, scientists, engineers and graduate students.
Download or read book Fundamentals of Heat Exchanger Design written by Dusan P. Sekulic and published by John Wiley & Sons. This book was released on 2023-10-24 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Heat Exchanger Design A cutting-edge update to the most essential single-volume resource on the market Heat exchangers are thermal devices which transfer heat between two or more fluids. They are integral to energy, automotive, aerospace, and myriad other technologies. The design and implementation of heat exchangers is an essential skill for engineers looking to contribute to a huge range of applications. Fundamentals of Heat Exchanger Design, Second Edition provides a comprehensive insight into the design and performance of heat exchangers. After introducing the basic heat transfer concepts and parameters, an overview of design methodologies is discussed. Subsequently, details of design theory of various types of exchangers are presented. The first edition established itself as the standard single-volume text on the subject. The second edition preserves an established in-depth approach but reflects some new technological developments related to design for manufacturing compact heat exchangers, including novel 3-D printing approaches to heat exchanger design. Readers of the second edition of Fundamentals of Heat Exchanger Design will also find: A new section on the design for manufacturing of compact heat exchangers A new section on design for additive manufacturing compact heat exchangers Detailed discussions of the design of recuperators and regenerators, pressure drop analysis, geometric parameters, heat transfer correlations, and more Fundamentals of Heat Exchanger Design is ideal for practicing engineers, as well as for advanced undergraduate and graduate students in mechanical and aerospace engineering, energy engineering, and related subjects.
Download or read book Methods for Inverse Heat Conduction Problems written by Dinh Nho Hào and published by Peter Lang Gmbh, Internationaler Verlag Der Wissenschaften. This book was released on 1998 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problems of determining the surface temperature and the surface heat flux, the capacity of the heat transfer coefficient from transient temperature measurements at one or more locations are frequently arising in many practical engineering contexts. These so-called inverse heat conduction problems (IHCPs) have been extensively studied over the last 30 years. This book starts with an up-to-date overview on the subject. It is mainly devoted to solvability criteria for IHCPs as well as efficient and stable solution methods like mollification methods, variational and iterative methods.
