Download or read book Fundamentals of Aerospace Navigation and Guidance written by Pierre T. Kabamba and published by Cambridge University Press. This book was released on 2014-08-29 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text covers fundamentals in navigation of modern aerospace vehicles. It is an excellent resource for both graduate students and practicing engineers.
Download or read book Fault Diagnosis and Fault Tolerant Control and Guidance for Aerospace Vehicles written by Ali Zolghadri and published by Springer Science & Business Media. This book was released on 2013-10-07 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Diagnosis and Fault-Tolerant Control and Guidance for Aerospace demonstrates the attractive potential of recent developments in control for resolving such issues as flight performance, self protection and extended-life structures. Importantly, the text deals with a number of practically significant considerations: tuning, complexity of design, real-time capability, evaluation of worst-case performance, robustness in harsh environments, and extensibility when development or adaptation is required. Coverage of such issues helps to draw the advanced concepts arising from academic research back towards the technological concerns of industry. Initial coverage of basic definitions and ideas and a literature review gives way to a treatment of electrical flight control system failures: oscillatory failure, runaway, and jamming. Advanced fault detection and diagnosis for linear and linear-parameter-varying systems are described. Lastly recovery strategies appropriate to remaining actuator/sensor/communications resources are developed. The authors exploit experience gained in research collaboration with academic and major industrial partners to validate advanced fault diagnosis and fault-tolerant control techniques with realistic benchmarks or real-world aeronautical and space systems. Consequently, the results presented in Fault Diagnosis and Fault-Tolerant Control and Guidance for Aerospace, will be of interest in both academic and aerospatial-industrial milieux.
Download or read book Advances in Aerospace Guidance Navigation and Control written by Florian Holzapfel and published by Springer Science & Business Media. This book was released on 2011-03-15 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last few decades, both the aeronautics and space disciplines have greatly influenced advances in controls, sensors, data fusion and navigation. Many of those achievements that made the word “aerospace” synonymous with “high–tech” were enabled by innovations in guidance, navigation and control. Europe has seen a strong trans-national consolidation process in aerospace over the last few decades. Most of the visible products, like commercial aircraft, fighters, helicopters, satellites, launchers or missiles, are not made by a single country – they are the fruits of cooperation. No European country by itself hosts a specialized guidance, navigation and controls community large enough to cover the whole spectrum of disciplines. However, on a European scale, mutual exchange of ideas, concepts and solutions is enriching for all. The 1st CEAS Specialist Conference on Guidance, Navigation and Control is an attempt to bring this community together. This book is a selection of papers presented at the conference. All submitted papers have gone through a formal review process in compliance with good journal practices. The best papers have been recommended by the reviewers to be published in this book.
Download or read book Morphing Aerospace Vehicles and Structures written by John Valasek and published by John Wiley & Sons. This book was released on 2012-02-24 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Morphing Aerospace Vehicles and Structures provides a highly timely presentation of the state-of-the-art, future directions and technical requirements of morphing aircraft. Divided into three sections it addresses morphing aircraft, bio-inspiration, and smart structures with specific focus on the flight control, aerodynamics, bio-mechanics, materials, and structures of these vehicles as well as power requirements and the use of advanced piezo materials and smart actuators. The tutorial approach adopted by the contributors, including underlying concepts and mathematical formulations, unifies the methodologies and tools required to provide practicing engineers and applied researchers with the insight to synthesize morphing air vehicles and morphing structures, as well as offering direction for future research.
Download or read book Advanced Trajectory Optimization Guidance and Control Strategies for Aerospace Vehicles written by Runqi Chai and published by Springer Nature. This book was released on 2023-10-29 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the design and application of advanced trajectory optimization and guidance and control (G&C) techniques for aerospace vehicles. Part I of the book focuses on the introduction of constrained aerospace vehicle trajectory optimization problems, with particular emphasis on the design of high-fidelity trajectory optimization methods, heuristic optimization-based strategies, and fast convexification-based algorithms. In Part II, various optimization theory/artificial intelligence (AI)-based methods are constructed and presented, including dynamic programming-based methods, model predictive control-based methods, and deep neural network-based algorithms. Key aspects of the application of these approaches, such as their main advantages and inherent challenges, are detailed and discussed. Some practical implementation considerations are then summarized, together with a number of future research topics. The comprehensive and systematic treatment of practical issues in aerospace trajectory optimization and guidance and control problems is one of the main features of the book, which is particularly suitable for readers interested in learning practical solutions in aerospace trajectory optimization and guidance and control. The book is useful to researchers, engineers, and graduate students in the fields of G&C systems, engineering optimization, applied optimal control theory, etc.
Download or read book Modeling and Simulation of Aerospace Vehicle Dynamics written by Peter H. Zipfel and published by AIAA. This book was released on 2000 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: A textbook for an advanced undergraduate course in which Zipfel (aerospace engineering, U. of Florida) introduces the fundamentals of an approach to, or step in, design that has become a field in and of itself. The first part assumes an introductory course in dynamics, and the second some specialized knowledge in subsystem technologies. Practicing engineers in the aerospace industry, he suggests, should be able to cover the material without a tutor. Rather than include a disk, he has made supplementary material available on the Internet. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Automatic Control of Atmospheric and Space Flight Vehicles written by Ashish Tewari and published by Springer Science & Business Media. This book was released on 2011-08-04 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automatic Control of Atmospheric and Space Flight Vehicles is perhaps the first book on the market to present a unified and straightforward study of the design and analysis of automatic control systems for both atmospheric and space flight vehicles. Covering basic control theory and design concepts, it is meant as a textbook for senior undergraduate and graduate students in modern courses on flight control systems. In addition to the basics of flight control, this book covers a number of upper-level topics and will therefore be of interest not only to advanced students, but also to researchers and practitioners in aeronautical engineering, applied mathematics, and systems/control theory.
Download or read book Advances in Aerospace Guidance Navigation and Control written by Qiping Chu and published by Springer Science & Business Media. This book was released on 2013-11-18 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the successful 1st CEAS (Council of European Aerospace Societies) Specialist Conference on Guidance, Navigation and Control (CEAS EuroGNC) held in Munich, Germany in 2011, Delft University of Technology happily accepted the invitation of organizing the 2nd CEAS EuroGNC in Delft, The Netherlands in 2013. The goal of the conference is to promote new advances in aerospace GNC theory and technologies for enhancing safety, survivability, efficiency, performance, autonomy and intelligence of aerospace systems using on-board sensing, computing and systems. A great push for new developments in GNC are the ever higher safety and sustainability requirements in aviation. Impressive progress was made in new research fields such as sensor and actuator fault detection and diagnosis, reconfigurable and fault tolerant flight control, online safe flight envelop prediction and protection, online global aerodynamic model identification, online global optimization and flight upset recovery. All of these challenges depend on new online solutions from on-board computing systems. Scientists and engineers in GNC have been developing model based, sensor based as well as knowledge based approaches aiming for highly robust, adaptive, nonlinear, intelligent and autonomous GNC systems. Although the papers presented at the conference and selected in this book could not possibly cover all of the present challenges in the GNC field, many of them have indeed been addressed and a wealth of new ideas, solutions and results were proposed and presented. For the 2nd CEAS Specialist Conference on Guidance, Navigation and Control the International Program Committee conducted a formal review process. Each paper was reviewed in compliance with good journal practice by at least two independent and anonymous reviewers. The papers published in this book were selected from the conference proceedings based on the results and recommendations from the reviewers.
Download or read book Fault tolerant Flight Control and Guidance Systems written by Guillaume J. J. Ducard and published by Springer Science & Business Media. This book was released on 2009-05-14 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a complete overview of fault-tolerant flight control techniques. Discussion covers the necessary equations for the modeling of small UAVs, a complete system based on extended Kalman filters, and a nonlinear flight control and guidance system.
Download or read book Introduction to Flight Testing and Applied Aerodynamics written by Barnes Warnock McCormick and published by AIAA (American Institute of Aeronautics & Astronautics). This book was released on 2011 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction into the art and science of measuring and predicting airplane performance, ""Introduction to Flight Testing and Applied Aerodynamics"" will benefit students, homebuilders, pilots, and engineers in learning how to collect and analyze data relevant to the takeoff, climb, cruise, handling qualities, descent, and landing of an aircraft. This textbook presents a basic and concise analysis of airplane performance, stability, and control. Basic algebra, trigonometry, and some calculus are used. Topics discussed include: Engine and propeller performance; Estimation of drag; Airplane dynamics; Wing spanwise lift distributions; Flight experimentation; Airspeed calibration; Takeoff performance; Climb performance; and, Dynamic and static stability. Special features: examples containing student-obtained data about specific airplanes and engines; simple experiments that determine an airplane's performance and handling qualities; and, end-of-chapter problems (with answers supplied in an appendix).
Download or read book Design of Trajectory Optimization Approach for Space Maneuver Vehicle Skip Entry Problems written by Runqi Chai and published by Springer. This book was released on 2019-07-30 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the design of optimal trajectories for space maneuver vehicles (SMVs) using optimal control-based techniques. It begins with a comprehensive introduction to and overview of three main approaches to trajectory optimization, and subsequently focuses on the design of a novel hybrid optimization strategy that combines an initial guess generator with an improved gradient-based inner optimizer. Further, it highlights the development of multi-objective spacecraft trajectory optimization problems, with a particular focus on multi-objective transcription methods and multi-objective evolutionary algorithms. In its final sections, the book studies spacecraft flight scenarios with noise-perturbed dynamics and probabilistic constraints, and designs and validates new chance-constrained optimal control frameworks. The comprehensive and systematic treatment of practical issues in spacecraft trajectory optimization is one of the book’s major features, making it particularly suited for readers who are seeking practical solutions in spacecraft trajectory optimization. It offers a valuable asset for researchers, engineers, and graduate students in GNC systems, engineering optimization, applied optimal control theory, etc.
Download or read book Advances in Aerospace Guidance Navigation and Control written by Joël Bordeneuve-Guibé and published by Springer. This book was released on 2015-04-04 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two first CEAS (Council of European Aerospace Societies) Specialist Conferences on Guidance, Navigation and Control (CEAS EuroGNC) were held in Munich, Germany in 2011 and in Delft, The Netherlands in 2013. ONERA The French Aerospace Lab, ISAE (Institut Supérieur de l’Aéronautique et de l’Espace) and ENAC (Ecole Nationale de l’Aviation Civile) accepted the challenge of jointly organizing the 3rd edition. The conference aims at promoting new advances in aerospace GNC theory and technologies for enhancing safety, survivability, efficiency, performance, autonomy and intelligence of aerospace systems. It represents a unique forum for communication and information exchange between specialists in the fields of GNC systems design and operation, including air traffic management. This book contains the forty best papers and gives an interesting snapshot of the latest advances over the following topics: l Control theory, analysis, and design l Novel navigation, estimation, and tracking methods l Aircraft, spacecraft, missile and UAV guidance, navigation, and control l Flight testing and experimental results l Intelligent control in aerospace applications l Aerospace robotics and unmanned/autonomous systems l Sensor systems for guidance, navigation and control l Guidance, navigation, and control concepts in air traffic control systems For the 3rd CEAS Specialist Conference on Guidance, Navigation and Control the International Program Committee conducted a formal review process. Each paper was reviewed in compliance with standard journal practice by at least two independent and anonymous reviewers. The papers published in this book were selected from the conference proceedings based on the results and recommendations from the reviewers.
Download or read book Introduction to Aircraft Flight Dynamics written by Louis V. Schmidt and published by AIAA. This book was released on 1998 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computers in the Guidance and Control of Aerospace Vehicles written by Cornelius T. Leondes and published by . This book was released on 1972 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of aerospace vehicle systems has had a great impact on computer systems technology wherein the computer has been asked to assume tasks of continually increasing complexity. This text documents this computer technology and the many important aspects related to it. The subject is treated in three broad areas. The first examines system design techniques. The second part deals with system hardware techniques and the third part discusses guidance and control computer system applications. (Author).
Download or read book Control of Spacecraft and Aircraft written by Arthur E. Bryson Jr. and published by Princeton University Press. This book was released on 2015-11-03 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here a leading researcher provides a comprehensive treatment of the design of automatic control logic for spacecraft and aircraft. In this book Arthur Bryson describes the linear-quadratic-regulator (LQR) method of feedback control synthesis, which coordinates multiple controls, producing graceful maneuvers comparable to those of an expert pilot. The first half of the work is about attitude control of rigid and flexible spacecraft using momentum wheels, spin, fixed thrusters, and gimbaled engines. Guidance for nearly circular orbits is discussed. The second half is about aircraft attitude and flight path control. This section discusses autopilot designs for cruise, climb-descent, coordinated turns, and automatic landing. One chapter deals with controlling helicopters near hover, and another offers an introduction to the stabilization of aeroelastic instabilities. Throughout the book there is a strong emphasis on the mathematical modeling necessary for designing a good feedback control system. The appendixes summarize analysis of linear dynamic systems, synthesis of analog and digital feedback control, simulation, and modeling of flexible vehicles.
Download or read book Introduction to the Design of Fixed wing Micro Air Vehicles written by T. J. Mueller and published by Amer Inst of Aeronautics &. This book was released on 2007-01 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This intriguing book breaks new ground on an emerging subject that has attracted considerable attention: the use of unmanned micro air vehicles (MAVs) to conduct special, limited duration missions. Significant advances in the miniaturization of electronics make it now possible to use vehicles of this type in a detection or surveillance role to carry visual, acoustic, chemical, or biological sensors. Interestingly, many of the advances in MAV technology can be traced directly to annual student competitions, begun in the late 1990s, that use relatively low cost model airplane equipment. The wide variety of configurations entered in these contests and their ongoing success has led to a serious interest in testing the performance of these vehicles for adaptation to practical applications. MAVs present aerodynamic issues unique to their size and the speeds at which they operate. Of particular concern is the aerodynamic efficiency of various fixed wing concepts. Very little information on the performance of low aspect ratio wing planforms existed for this flight regime until MAVs became of interest and the proliferation of fixed wing designs has since expanded. This book presents a brief history of unmanned air vehicles and offers elements of aerodynamics for low aspect ratio wings. Propulsion and the basic concepts for fixed wing MAV design are presented, as is a method for autopilot integration. Three different wing configurations are presented in a series of step-by-step case studies. The goal of the book is to assist both working professionals and students to design, build, and fly MAVs, and do so in a way that will advance the state of the art and lead to the development of even smalleraircraft.
Download or read book Flight Stability and Automatic Control written by Robert C. Nelson and published by . This book was released on 1998 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition of this this flight stability and controls guide features an unintimidating math level, full coverage of terminology, and expanded discussions of classical to modern control theory and autopilot designs. Extensive examples, problems, and historical notes, make this concise book a vital addition to the engineer's library.
