Download or read book Introduction to Semiconductor Manufacturing Technology written by Hong Xiao and published by . This book was released on 2001 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: For courses in Semiconductor Manufacturing Technology, IC Fabrication Technology, and Devices: Conventional Flow. This up-to-date text on semiconductor manufacturing processes takes into consideration the rapid development of the industry's technology. It thoroughly describes the complicated and new IC chip fabrication processes in detail with minimum mathematics, physics, and chemistry. Advanced technologies are covered along with older ones to assist students in understanding the development processes from a historic point of view.
Download or read book Introduction to Semiconductor Technology written by Hong Xiao and published by SPIE-International Society for Optical Engineering. This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: IC chip manufacturing processes, such as photolithography, etch, CVD, PVD, CMP, ion implantation, RTP, inspection, and metrology, are complex methods that draw upon many disciplines. Introduction to Semiconductor Manufacturing Technologies, Second Edition thoroughly describes the complicated processes with minimal mathematics, chemistry, and physics; it covers advanced concepts while keeping the contents accessible to readers without advanced degrees. Designed as a textbook for college students, this book provides a realistic picture of the semiconductor industry and an in-depth discussion of IC chip fabrication technology. The text focuses on current fabrication technologies, but older technologies are discussed for historical context.
Download or read book INTRODUCTION TO SEMICONDUCTOR MANUFACTURING TECHNOLOGY written by HONG. XIAO and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Semiconductor Manufacturing and Process Control written by Gary S. May and published by John Wiley & Sons. This book was released on 2006-05-26 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide to semiconductor manufacturing from processcontrol to yield modeling and experimental design Fundamentals of Semiconductor Manufacturing and Process Controlcovers all issues involved in manufacturing microelectronic devicesand circuits, including fabrication sequences, process control,experimental design, process modeling, yield modeling, and CIM/CAMsystems. Readers are introduced to both the theory and practice ofall basic manufacturing concepts. Following an overview of manufacturing and technology, the textexplores process monitoring methods, including those that focus onproduct wafers and those that focus on the equipment used toproduce wafers. Next, the text sets forth some fundamentals ofstatistics and yield modeling, which set the foundation for adetailed discussion of how statistical process control is used toanalyze quality and improve yields. The discussion of statistical experimental design offers readers apowerful approach for systematically varying controllable processconditions and determining their impact on output parameters thatmeasure quality. The authors introduce process modeling concepts,including several advanced process control topics such asrun-by-run, supervisory control, and process and equipmentdiagnosis. Critical coverage includes the following: * Combines process control and semiconductor manufacturing * Unique treatment of system and software technology and managementof overall manufacturing systems * Chapters include case studies, sample problems, and suggestedexercises * Instructor support includes electronic copies of the figures andan instructor's manual Graduate-level students and industrial practitioners will benefitfrom the detailed exami?nation of how electronic materials andsupplies are converted into finished integrated circuits andelectronic products in a high-volume manufacturingenvironment. An Instructor's Manual presenting detailed solutions to all theproblems in the book is available from the Wiley editorialdepartment. An Instructor Support FTP site is also available.
Download or read book Introduction to Semiconductor Devices written by Kevin F. Brennan and published by Cambridge University Press. This book was released on 2005-02-03 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: From semiconductor fundamentals to semiconductor devices used in the telecommunications and computing industries, this 2005 book provides a solid grounding in the most important devices used in the hottest areas of electronic engineering. The book includes coverage of future approaches to computing hardware and RF power amplifiers, and explains how emerging trends and system demands of computing and telecommunications systems influence the choice, design and operation of semiconductors. Next, the field effect devices are described, including MODFETs and MOSFETs. Short channel effects and the challenges faced by continuing miniaturisation are then addressed. The rest of the book discusses the structure, behaviour, and operating requirements of semiconductor devices used in lightwave and wireless telecommunications systems. This is both an excellent senior/graduate text, and a valuable reference for engineers and researchers in the field.
Download or read book Introductory Semiconductor Device Physics written by Greg Parker and published by CRC Press. This book was released on 2004-09-30 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Semiconductor Device Physics is a popular and established text that offers a thorough introduction to the underlying physics of semiconductor devices. It begins with a review of basic solid state physics, then goes on to describe the properties of semiconductors including energy bands, the concept of effective mass, carrier concentration, and conduction in more detail. Thereafter the book is concerned with the principles of operation of specific devices, beginning with the Gunn Diode and the p-n junction. The remaining chapters cover the on specific devices, including the LED, the bipolar transistor, the field-effect transistor, and the semiconductor laser. The book concludes with a chapter providing a brief introduction to quantum theory. Not overtly mathematical, Introduction to Semiconductor Device Physics introduces only those physical concepts required for an understanding of the semiconductor devices being considered. The author's intuitive style, coupled with an extensive set of worked problems, make this the ideal introductory text for those concerned with understanding electrical and electronic engineering, applied physics, and related subjects.
Download or read book Semiconductor Technology written by Mikhail Efimovich Levinshteĭn and published by Wiley-Interscience. This book was released on 1997-09-24 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing on decades of Russian semiconductor research, this remarkable book makes available a great many Si and III-V semiconductor technologies that are practically unknown in the West. Often simpler and cheaper than conventional Western methods, these approaches will enable researchers to improve the quality of semiconductor materials and fabricate new types of devices. After a general introduction to semiconductor technology, the book describes transmutation doping, which offers all the advantages of neutron doping, permits controlled doping depth from 0.1 micron to 1mm, and offers the option of forming deep channels. Also presented is a novel technique using polymer spinon diffusant films for a uniform and reproducible introduction of impurities into silicon. Simpler and less expensive, too, are the reproducible processes using rare-earth elements in the synthesis of various III-V compounds. The parameters of monocrystals and epilayers grown with these elements are equal to those obtained by more complicated and expensive techniques, such as MBE and MOVPE. This invaluable manual explains the processes and advantages of generation-relaxation of nonequilibrium intrinsic defects in Si and introduces new ideas related to the role these defects may play in the formation of the generation-recombination centers in silicon. Also described in these chapters are many original techniques for external and intrinsic gettering in different semiconductors. Important experimental results dealing with isovalent doping of direct gap III-V compounds grown by different epitaxial methods are presented in detail by leading experts. These researchers also show how to achieve precise control of material properties for all principal methods of epitaxial growth. The final section describes nontraditional techniques for photochemical etching and the production of holographic diffraction grating by means of maskless chemical etching. This technique offers the highest resolution and can be applied to more than 20 semiconductor materials, including single crystal, polycrystalline, and amorphous materials. Researchers and graduate students in solid state physics, device physics, materials science, and electrical engineering will find a wealth of original, stimulating, and valuable information in this unique manual. New, more effective techniques for semiconductor processing and fabrication The product of decades of Russian research in semiconductor technology, this invaluable book offers Western researchers and engineers a wide range of new techniques, recipes, and characterization methods that provide simpler, cheaper, and more effective solutions to problems in semiconductor processing and fabrication. Many of these approaches appear here for the first time in Western technological literature. Included are: * Transmutation doping of semiconductors by charged particles * Polymer diffusants in semiconductor technology * Rare-earth elements in III-V compounds * Intrinsic point defect engineering in silicon high-voltage power device technology * Isovalent impurity doping of direct-gap III-V semiconductor layers * Surface passivation of III-V compounds by inorganic dielectrics and polymides * Precision profiling of semiconductor surfaces by means of photochemical etching
Download or read book Semiconductor Manufacturing Technology written by Chue San Yoo and published by World Scientific. This book was released on 2008 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook contains all the materials that an engineer needs to know to start a career in the semiconductor industry. It also provides readers with essential background information for semiconductor research. It is written by a professional who has been working in the field for over two decades and teaching the material to university students for the past 15 years. It includes process knowledge from raw material preparation to the passivation of chips in a modular format.
Download or read book Guide To Semiconductor Engineering written by Jerzy Ruzyllo and published by World Scientific. This book was released on 2020-03-10 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Guide to Semiconductor Engineering is concerned with semiconductor materials, devices and process technologies which in combination constitute an enabling force behind the growth of our technical civilization. This book was conceived and written keeping in mind those who need to learn about semiconductors, who are professionally associated with select aspects of this technical domain and want to see it in a broader context, or for those who are simply interested in state-of-the-art semiconductor engineering. In its coverage of semiconductor properties, materials, devices, manufacturing technology, and characterization methods, this Guide departs from textbook-style, monothematic in-depth discussions of each topic. Instead, it considers the entire broad field of semiconductor technology and identifies synergistic interactions within various areas in one concise volume. It is a holistic approach to the coverage of semiconductor engineering which distinguishes this Guide among other books concerned with semiconductors related issues.
Download or read book Introduction to Semiconductor Manufacturing Technology International Edition written by Hong Xiao and published by . This book was released on 2000-12-01 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Semiconductor Materials and Devices written by M.S. Tyagi and published by . This book was released on 2003-12 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Semiconductor Technology written by Cheng Wang and published by Wiley-Interscience. This book was released on 1990-02 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aimed at engineers and researchers in electronics and materials science, this volume provides coverage of practical design considerations and applications of gallium arsenide (GaAs) and related compounds, and presents both theoretical and practical approaches to the subject.
Download or read book Semiconductor Technologies written by Jan Grym and published by BoD – Books on Demand. This book was released on 2010-04-01 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor technologies continue to evolve and amaze us. New materials, new structures, new manufacturing tools, and new advancements in modelling and simulation form a breeding ground for novel high performance electronic and photonic devices. This book covers all aspects of semiconductor technology concerning materials, technological processes, and devices, including their modelling, design, integration, and manufacturing.
Download or read book Fundamentals of Semiconductor Processing Technology written by Badih El-Kareh and published by Springer Science & Business Media. This book was released on 1994-12-31 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: The drive toward new semiconductor technologies is intricately related to market demands for cheaper, smaller, faster, and more reliable circuits with lower power consumption. The development of new processing tools and technologies is aimed at optimizing one or more of these requirements. This goal can, however, only be achieved by a concerted effort between scientists, engineers, technicians, and operators in research, development, and manufac turing. It is therefore important that experts in specific disciplines, such as device and circuit design, understand the principle, capabil ities, and limitations of tools and processing technologies. It is also important that those working on specific unit processes, such as lithography or hot processes, be familiar with other unit processes used to manufacture the product. Several excellent books have been published on the subject of process technologies. These texts, however, cover subjects in too much detail, or do not cover topics important to modem tech nologies. This book is written with the need for a "bridge" between different disciplines in mind. It is intended to present to engineers and scientists those parts of modem processing technologies that are of greatest importance to the design and manufacture of semi conductor circuits. The material is presented with sufficient detail to understand and analyze interactions between processing and other semiconductor disciplines, such as design of devices and cir cuits, their electrical parameters, reliability, and yield.
Download or read book Manufacturing Technology in the Electronics Industry written by P. Edwards and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sequence of events which led to the writing of this book started at a seminar on Manufacturing Technology in the Electronics Industry given by the Institution of Production Engineers in 1987. The seminar identified that the field of manufacturing engineering for the electronics industry was effectively missing from the vast majority of production engineering degree courses. The reason for this was that production engineering departments typically spring from mechanical engineering departments. This leads to a mechanical bias in the practical aspects of such courses. The consequence of this was that electronics companies could not recruit graduates with both relevant production engineering and electronic engineering backgrounds. This necessitated either recruiting production engineering graduates and giving them the necessary electronic engineering training, or giving production engineering training to electronic engineering graduates. A consequence of the lack of courses in a subject is that there is also a lack of relevant textbooks in the area, as most textbooks are intended to tie into courses. In the field of manufacturing technology for the electronics industry, existing textbooks tend to be highly specialized and mainly concerned with the fabrication of semiconductor devices.
Download or read book Semiconductor Silicon Crystal Technology written by Fumio Shimura and published by Elsevier. This book was released on 2012-12-02 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor Silicon Crystal Technology provides information pertinent to silicon, which is the dominant material in the semiconductor industry. This book discusses the technology of integrated circuits (ICs) in electronic materials manufacturer. Comprised of eight chapters, this book provides an overview of the basic science, silicon materials, IC device fabrication processes, and their interaction for enhancing both the processes and materials. This text then proceeds with a discussion of the atomic structure and bonding mechanisms in order to understand the nature and formation of crystal structures, which are the fundamentals of material science. Other chapters consider the technological crystallography and classify natural crystal morphologies based on observation. The final chapter deals with the interrelationships among silicon material characteristics, circuit design, and IC fabrication in order to ensure the fabrication of very-large-scale-integration/ultra-large-scale-integration circuits. This book is a valuable resource for graduate students, physicists, engineers, materials scientists, and professionals involved in semiconductor industry.
Download or read book Handbook of Semiconductor Technology Volume 2 written by Kenneth A. Jackson and published by Wiley-VCH. This book was released on 2000-08-15 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor technology is the basis of today's microelectronics industry with its many impacts on our modern life, i.e. computer and communication technology. This two-volume handbook covers the basics of semiconductor processing technology, which are as essential for the design of new microelectronic devices as the fundamental physics. Volume 1 'Electronic Structure and Properties' covers the structure and properties of semiconductors, with particular emphasis on concepts relevant to semiconductor technology. Volume 2 'Processing of Semiconductors' deals with the enabling materials technology for the electronics industry. World-renowned authors have contributed to this unique treatment of the processing of semiconductors and related technologies. Of interest to physicists and engineers in research and in the electronics industry, this is a valuable reference source and state-of-the-art review by the world's top authors.
