Download or read book Introduction to Scientific and Technical Computing written by Frank T. Willmore and published by CRC Press. This book was released on 2016-08-19 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Created to help scientists and engineers write computer code, this practical book addresses the important tools and techniques that are necessary for scientific computing, but which are not yet commonplace in science and engineering curricula. This book contains chapters summarizing the most important topics that computational researchers need to know about. It leverages the viewpoints of passionate experts involved with scientific computing courses around the globe and aims to be a starting point for new computational scientists and a reference for the experienced. Each contributed chapter focuses on a specific tool or skill, providing the content needed to provide a working knowledge of the topic in about one day. While many individual books on specific computing topics exist, none is explicitly focused on getting technical professionals and students up and running immediately across a variety of computational areas.
Download or read book Introduction to Scientific and Technical Computing written by Frank T. Willmore and published by CRC Press. This book was released on 2016-08-19 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Created to help scientists and engineers write computer code, this practical book addresses the important tools and techniques that are necessary for scientific computing, but which are not yet commonplace in science and engineering curricula. This book contains chapters summarizing the most important topics that computational researchers need to know about. It leverages the viewpoints of passionate experts involved with scientific computing courses around the globe and aims to be a starting point for new computational scientists and a reference for the experienced. Each contributed chapter focuses on a specific tool or skill, providing the content needed to provide a working knowledge of the topic in about one day. While many individual books on specific computing topics exist, none is explicitly focused on getting technical professionals and students up and running immediately across a variety of computational areas.
Download or read book JavaTech an Introduction to Scientific and Technical Computing with Java written by Clark S. Lindsey and published by Cambridge University Press. This book was released on 2005-10-13 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: "JavaTech demonstrates the ease with which Java can be used to create powerful network applications and distributed computing applications. It can be used as a textbook for introductory or intermediate level programming courses, and for more advanced students and researchers who need to learn Java for a particular task. JavaTech is up to date with Java 5.0."--BOOK JACKET.
Download or read book Introduction to Scientific Computing and Data Analysis written by Mark H. Holmes and published by Springer Nature. This book was released on 2023-07-11 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides an introduction to numerical computing and its applications in science and engineering. The topics covered include those usually found in an introductory course, as well as those that arise in data analysis. This includes optimization and regression-based methods using a singular value decomposition. The emphasis is on problem solving, and there are numerous exercises throughout the text concerning applications in engineering and science. The essential role of the mathematical theory underlying the methods is also considered, both for understanding how the method works, as well as how the error in the computation depends on the method being used. The codes used for most of the computational examples in the text are available on GitHub. This new edition includes material necessary for an upper division course in computational linear algebra.
Download or read book An Introduction to High performance Scientific Computing written by Lloyd Dudley Fosdick and published by MIT Press. This book was released on 1996 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for undergraduates, An Introduction to High-Performance Scientific Computing assumes a basic knowledge of numerical computation and proficiency in Fortran or C programming and can be used in any science, computer science, applied mathematics, or engineering department or by practicing scientists and engineers, especially those associated with one of the national laboratories or supercomputer centers. This text evolved from a new curriculum in scientific computing that was developed to teach undergraduate science and engineering majors how to use high-performance computing systems (supercomputers) in scientific and engineering applications. Designed for undergraduates, An Introduction to High-Performance Scientific Computing assumes a basic knowledge of numerical computation and proficiency in Fortran or C programming and can be used in any science, computer science, applied mathematics, or engineering department or by practicing scientists and engineers, especially those associated with one of the national laboratories or supercomputer centers. The authors begin with a survey of scientific computing and then provide a review of background (numerical analysis, IEEE arithmetic, Unix, Fortran) and tools (elements of MATLAB, IDL, AVS). Next, full coverage is given to scientific visualization and to the architectures (scientific workstations and vector and parallel supercomputers) and performance evaluation needed to solve large-scale problems. The concluding section on applications includes three problems (molecular dynamics, advection, and computerized tomography) that illustrate the challenge of solving problems on a variety of computer architectures as well as the suitability of a particular architecture to solving a particular problem. Finally, since this can only be a hands-on course with extensive programming and experimentation with a variety of architectures and programming paradigms, the authors have provided a laboratory manual and supporting software via anonymous ftp. Scientific and Engineering Computation series
Download or read book Introduction to the Tools of Scientific Computing written by Einar Smith and published by Springer Nature. This book was released on 2020-12-02 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides an introduction to common programming tools and methods in numerical mathematics and scientific computing. Unlike widely used standard approaches, it does not focus on any particular language but aims to explain the key underlying concepts. In general, new concepts are first introduced in the particularly user-friendly Python language and then transferred and expanded in various scientific programming environments from C / C ++, Julia and MATLAB to Maple. This includes different approaches to distributed computing. The fact that different languages are studied and compared also makes the book useful for mathematicians and practitioners trying to decide which programming language to use for which purposes.
Download or read book Introduction to Computational Science written by Angela B. Shiflet and published by Princeton University Press. This book was released on 2014-03-30 with total page 857 pages. Available in PDF, EPUB and Kindle. Book excerpt: The essential introduction to computational science—now fully updated and expanded Computational science is an exciting new field at the intersection of the sciences, computer science, and mathematics because much scientific investigation now involves computing as well as theory and experiment. This textbook provides students with a versatile and accessible introduction to the subject. It assumes only a background in high school algebra, enables instructors to follow tailored pathways through the material, and is the only textbook of its kind designed specifically for an introductory course in the computational science and engineering curriculum. While the text itself is generic, an accompanying website offers tutorials and files in a variety of software packages. This fully updated and expanded edition features two new chapters on agent-based simulations and modeling with matrices, ten new project modules, and an additional module on diffusion. Besides increased treatment of high-performance computing and its applications, the book also includes additional quick review questions with answers, exercises, and individual and team projects. The only introductory textbook of its kind—now fully updated and expanded Features two new chapters on agent-based simulations and modeling with matrices Increased coverage of high-performance computing and its applications Includes additional modules, review questions, exercises, and projects An online instructor's manual with exercise answers, selected project solutions, and a test bank and solutions (available only to professors) An online illustration package is available to professors
Download or read book Scientific Computing written by Michael T. Heath and published by SIAM. This book was released on 2018-11-14 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book differs from traditional numerical analysis texts in that it focuses on the motivation and ideas behind the algorithms presented rather than on detailed analyses of them. It presents a broad overview of methods and software for solving mathematical problems arising in computational modeling and data analysis, including proper problem formulation, selection of effective solution algorithms, and interpretation of results.? In the 20 years since its original publication, the modern, fundamental perspective of this book has aged well, and it continues to be used in the classroom. This Classics edition has been updated to include pointers to Python software and the Chebfun package, expansions on barycentric formulation for Lagrange polynomial interpretation and stochastic methods, and the availability of about 100 interactive educational modules that dynamically illustrate the concepts and algorithms in the book. Scientific Computing: An Introductory Survey, Second Edition is intended as both a textbook and a reference for computationally oriented disciplines that need to solve mathematical problems.
Download or read book Introduction to Scientific Computing written by Charles F. Van Loan and published by Pearson. This book was released on 2000 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unique in content and approach, this book covers all the topics that are usually covered in an introduction to scientific computing--but folds in graphics and matrix-vector manipulation in a way that gets readers to appreciate the "connection" between continuous mathematics and computing. "MATLAB 5" is used "throughout" to encourage experimentation, and each chapter focuses on a different important theorem--allowing readers to appreciate the rigorous side of scientific computing. In addition to standard topical coverage, each chapter includes 1) a sketch of a "hard" problem that involves ill-conditioning, high dimension, etc.; 2)at least one theorem with both a rigorous proof and a "proof by MATLAB" experiment to bolster intuition; 3)at least one recursive algorithm; and 4)at least one connection to a real-world application. The book revolves around examples that are packaged in 200+ M-files, which, collectively, communicate all the key mathematical ideas and an appreciation for the subtleties of numerical computing. Power Tools of the Trade. Polynomial Interpolation. Piecewise Polynomial Interpolation. Numerical Integration. Matrix Computations. Linear Systems. The QR and Cholesky Factorizations. Nonlinear Equations and Optimization. The Initial Value Problem. For engineers and mathematicians.
Download or read book Elements of Scientific Computing written by Aslak Tveito and published by Springer Science & Business Media. This book was released on 2010-09-24 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science used to be experiments and theory, now it is experiments, theory and computations. The computational approach to understanding nature and technology is currently flowering in many fields such as physics, geophysics, astrophysics, chemistry, biology, and most engineering disciplines. This book is a gentle introduction to such computational methods where the techniques are explained through examples. It is our goal to teach principles and ideas that carry over from field to field. You will learn basic methods and how to implement them. In order to gain the most from this text, you will need prior knowledge of calculus, basic linear algebra and elementary programming.
Download or read book Introduction to Scientific Programming with Python written by Joakim Sundnes and published by . This book was released on 2020 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book offers an initial introduction to programming for scientific and computational applications using the Python programming language. The presentation style is compact and example-based, making it suitable for students and researchers with little or no prior experience in programming. The book uses relevant examples from mathematics and the natural sciences to present programming as a practical toolbox that can quickly enable readers to write their own programs for data processing and mathematical modeling. These tools include file reading, plotting, simple text analysis, and using NumPy for numerical computations, which are fundamental building blocks of all programs in data science and computational science. At the same time, readers are introduced to the fundamental concepts of programming, including variables, functions, loops, classes, and object-oriented programming. Accordingly, the book provides a sound basis for further computer science and programming studies.
Download or read book JavaTech an Introduction to Scientific and Technical Computing with Java written by Clark S. Lindsey and published by Cambridge University Press. This book was released on 2005-10-13 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: JavaTech is a practical introduction to the Java programming language with an emphasis on the features that benefit technical computing. After presenting the basics of object-oriented programming in Java, it examines introductory topics such as graphical interfaces and thread processes. It goes on to review network programming and develops Web client-server examples for tasks such as monitoring remote devices. The focus then shifts to distributed computing with RMI. Finally, it examines how Java programs can access the local platform and interact with hardware. Topics include combining native code with Java, communication via serial lines, and programming embedded processors. An extensive web site supports the book with additional instructional materials. JavaTech demonstrates the ease with which Java can be used to create powerful network applications and distributed computing applications. It will be used as a textbook for programming courses, and by researchers who need to learn Java for a particular task.
Download or read book Introduction to Scientific Computing written by Brigitte Lucquin and published by . This book was released on 1998-06-11 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basic scientific computing methods for the solution of partial differential equations (PDEs) as they occur in engineering problems. Programming codes in Fortran and C are included for each problem. Opening with the definition of the programming environment for the solving of PDE systems, it then addresses in detail the programming of the model problem by the finite element method. Efficiency, compact storage pre-conditioning and mesh adaption are also presented. General elliptic problems and evolution problems are then dealt with. Finally, topics related to other numerical methods, algorithms for parallel computing and multi processor computers are detailed. An integrated software package which illustrates the featured programs of PDEs is available on the Internet via anonymous FTP. The methods presented have applications in numerous fields of engineering including shape optimisation, nuclear safety, heat transfer, acoustics, mechanics of fluids and elasticity, and are also relevant to other areas such as pollution, meteorology, biology, etc.
Download or read book Introduction to High Performance Scientific Computing written by Victor Eijkhout and published by Lulu.com. This book was released on 2010 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a textbook that teaches the bridging topics between numerical analysis, parallel computing, code performance, large scale applications.
Download or read book Lessons in Scientific Computing written by Norbert Schorghofer and published by CRC Press. This book was released on 2018-09-25 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Taking an interdisciplinary approach, this new book provides a modern introduction to scientific computing, exploring numerical methods, computer technology, and their interconnections, which are treated with the goal of facilitating scientific research across all disciplines. Each chapter provides an insightful lesson and viewpoints from several subject areas are often compounded within a single chapter. Written with an eye on usefulness, longevity, and breadth, Lessons in Scientific Computing will serve as a "one stop shop" for students taking a unified course in scientific computing, or seeking a single cohesive text spanning multiple courses. Features: Provides a unique combination of numerical analysis, computer programming, and computer hardware in a single text Includes essential topics such as numerical methods, approximation theory, parallel computing, algorithms, and examples of computational discoveries in science Not wedded to a specific programming language
Download or read book A Gentle Introduction to Scientific Computing written by Dan Stanescu and published by CRC Press. This book was released on 2022-05-01 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific Computation has established itself as a stand-alone area of knowledge at the borderline between computer science and applied mathematics. Nonetheless, its interdisciplinary character cannot be denied: its methodologies are increasingly used in a wide variety of branches of science and engineering. A Gentle Introduction to Scientific Computing intends to serve a very broad audience of college students across a variety of disciplines. It aims to expose its readers to some of the basic tools and techniques used in computational science, with a view to helping them understand what happens "behind the scenes" when simple tools such as solving equations, plotting and interpolation are used. To make the book as practical as possible, the authors explore their subject both from a theoretical, mathematical perspective and from an implementation-driven, programming perspective. Features Middle-ground approach between theory and implementation. Suitable reading for a broad range of students in STEM disciplines. Could be used as the primary text for a first course in scientific computing. Introduces mathematics majors, without any prior computer science exposure, to numerical methods. All mathematical knowledge needed beyond Calculus (together with the most widely used Calculus notation and concepts) is introduced in the text to make it self-contained.
Download or read book Guide to Scientific Computing in C written by Joe Pitt-Francis and published by Springer Science & Business Media. This book was released on 2012-02-15 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This easy-to-read textbook/reference presents an essential guide to object-oriented C++ programming for scientific computing. With a practical focus on learning by example, the theory is supported by numerous exercises. Features: provides a specific focus on the application of C++ to scientific computing, including parallel computing using MPI; stresses the importance of a clear programming style to minimize the introduction of errors into code; presents a practical introduction to procedural programming in C++, covering variables, flow of control, input and output, pointers, functions, and reference variables; exhibits the efficacy of classes, highlighting the main features of object-orientation; examines more advanced C++ features, such as templates and exceptions; supplies useful tips and examples throughout the text, together with chapter-ending exercises, and code available to download from Springer.
