Download or read book Introduction to Nanorobotic Manipulation and Assembly written by Ning Xi and published by Artech House. This book was released on 2012 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology will allow us to build devices smaller than previously thought possible and will bring fundamental changes to disciplines within engineering, chemistry, medicine, biology, and physics. Understanding the principles of nano manipulation and assembly is tremendously important for those aiming to develop nanoscale systems. This forward-looking resource offers you cutting-edge coverage of the fundamentals and latest applications in this burgeoning field from an engineering perspective. The book shows you how nano-manipulation allows for the detection and manipulation of tiny entities such as single molecules, nanotubes, nanocubes, cells, viruses, proteins, and DNA molecules. You discover the most promising nanorobotic manipulation and assembly methods and find clear examples of key application areas, including nano sensors, electronics, and biomedical engineering. Supported with over 100 illustrations, this groundbreaking volumes offers comprehensive coverage of the subject, from the physics of nano manipulation... to robotic assembly of nano devices. Moreover, you get a glimpse of the future direction of this revolutionary technological area.
Download or read book Introduction to Nanorobotic Manipulation and Assembly written by and published by . This book was released on 2011 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanorobotics written by Constantinos Mavroidis and published by Springer Science & Business Media. This book was released on 2013-01-04 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanorobots can be defined as intelligent systems with overall dimensions at or below the micrometer range that are made of assemblies of nanoscale components with individual dimensions ranging between 1 to 100 nm. These devices can now perform a wide variety of tasks at the nanoscale in a wide variety of fields including but not limited to fields such as manufacturing, medicine, supply chain, biology, and aerospace. Nanorobotics: Current Approaches and Techniques offers a comprehensive overview of this emerging interdisciplinary field with a wide ranging discussion that includes nano-manipulation and industrial nanorobotics, nanorobotic manipulation in biology and medicine, nanorobotic sensing, navigation and swarm behavior and CNT, and protein and DNA-based nanorobotics.
Download or read book Nanorobotics written by Lixin Dong and published by CRC Press. This book was released on 2016-08-26 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of nanorobotics brings together several disciplines, including nanofabrication processes used for producing nanoscale robots, nanoactuators, nanosensors, and physical modeling at nano scales. Nanorobotic systems emphasize the engineering aspect of nanorobotics and include the manufacturing and application technologies of nanorobotic manipulation systems, nanoelectromechanical systems (NEMS), and nanorobots (nano-sized robots, which are yet to be realized). NEMS will serve as both the tools to be used for fabricating future nanorobots as well as the components from which these nanorobots may be developed. At present, nanorobotic manipulation and assembly are the main approaches for building and characterization of NEMS. This book covers all of these issues.
Download or read book Micro Nanorobotic Manipulation Systems and Their Applications written by Toshio Fukuda and published by Springer Science & Business Media. This book was released on 2013-02-28 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro/Nano Robotics and Automation technologies have rapidly grown associated with the growth of Micro and Nanotechnologies. This book presents a summary of fundamentals in micro-nano scale engineering and the current state of the art of these technologies. “Micro-Nanorobotic Manipulation Systems and their Applications” introduces these advanced technologies from the basics and applications aspects of Micro/Nano-Robotics and Automation from the prospective micro/nano-scale manipulation. The book is organized in 9 chapters including an overview chapter of Micro/Nanorobotics and Automation technology from the historical view and important related research works. Further chapters are devoted to the physics of micro-nano fields as well as to material and science, microscopes, fabrication technology, importance of biological cell, and control techniques. Furthermore important examples, applications and a concise summary of Micro-Nanorobotics and Automation technologies are given.
Download or read book Nanorobotics and Nanodiagnostics in Integrative Biology and Biomedicine written by Ki-Taek Lim and published by Springer Nature. This book was released on 2022-12-15 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanorobotics and Nanodiagnostics in Integrative Biology and Biomedicine "Nanorobotics and nanodiagnostics” can be defined as a new generation of biohybrid and nanorobotics that translate fundamental biological principles into engineering design rules, or integrative living components into synthetic structures to create biorobots and nanodiagnotics that perform like natural systems. Nanorobots or nanobots are structured of a nanoscale made of individual assemblies. They can be termed as intelligent systems manufactured with self-assembly strategies by chemical, physical and biological approaches. The nanorobot can determine the structure and enhance the adaptability to the environment in interdisciplinary tasks. "Nanorobotics and nanodiagnostics" is a new generation of biohybrid that translates fundamental biological principles into engineering design rules to create biorobots that perform like natural systems. These biorobotics and diagnostics can now perform various missions to be accomplished certain tasks in the research areas such as integrative biology and biomedicine. "Nanorobotics and Nanodiagnostics in Integrative Biology and Biomedicine" sheds light on a comprehensive overview of the multidisciplinary areas that explore nanotherapeutics and nanorobotic manipulation in biology and medicine. It provides up-to-date knowledge of the promising fields of integrative biology and biomedicine for nano-assisted biorobotics and diagnostics to detect and treat diseases that will enable new scientific discoveries. /div
Download or read book Springer Handbook of Robotics written by Bruno Siciliano and published by Springer. This book was released on 2016-07-27 with total page 2259 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this handbook provides a state-of-the-art overview on the various aspects in the rapidly developing field of robotics. Reaching for the human frontier, robotics is vigorously engaged in the growing challenges of new emerging domains. Interacting, exploring, and working with humans, the new generation of robots will increasingly touch people and their lives. The credible prospect of practical robots among humans is the result of the scientific endeavour of a half a century of robotic developments that established robotics as a modern scientific discipline. The ongoing vibrant expansion and strong growth of the field during the last decade has fueled this second edition of the Springer Handbook of Robotics. The first edition of the handbook soon became a landmark in robotics publishing and won the American Association of Publishers PROSE Award for Excellence in Physical Sciences & Mathematics as well as the organization’s Award for Engineering & Technology. The second edition of the handbook, edited by two internationally renowned scientists with the support of an outstanding team of seven part editors and more than 200 authors, continues to be an authoritative reference for robotics researchers, newcomers to the field, and scholars from related disciplines. The contents have been restructured to achieve four main objectives: the enlargement of foundational topics for robotics, the enlightenment of design of various types of robotic systems, the extension of the treatment on robots moving in the environment, and the enrichment of advanced robotics applications. Further to an extensive update, fifteen new chapters have been introduced on emerging topics, and a new generation of authors have joined the handbook’s team. A novel addition to the second edition is a comprehensive collection of multimedia references to more than 700 videos, which bring valuable insight into the contents. The videos can be viewed directly augmented into the text with a smartphone or tablet using a unique and specially designed app. Springer Handbook of Robotics Multimedia Extension Portal: http://handbookofrobotics.org/
Download or read book Design Modeling and Characterization of Bio Nanorobotic Systems written by Mustapha Hamdi and published by Springer Science & Business Media. This book was released on 2010-10-06 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanorobots represent a nanoscale device where proteins such as DNA, carbon nanotubes could act as motors, mechanical joints, transmission elements, or sensors. When these different components were assembled together they can form nanorobots with multi-degree-of-freedom, able to apply forces and manipulate objects in the nanoscale world. Design, Modeling and Characterization of Bio-Nanorobotic Systems investigates the design, assembly, simulation, and prototyping of biological and artificial molecular structures with the goal of implementing their internal nanoscale movements within nanorobotic systems in an optimized manner.
Download or read book Artificial Intelligence in the Age of Nanotechnology written by Jaber, Wassim and published by IGI Global. This book was released on 2023-12-07 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the world of academia, scholars and researchers are confronted with a rapidly expanding knowledge base in Artificial Intelligence (AI) and nanotechnology. The integration of these two groundbreaking fields presents an intricate web of concepts, innovations, and interdisciplinary applications that can overwhelm even the most astute academic minds. Staying up to date with the latest developments and effectively navigating this complex terrain has become a pressing challenge for those striving to contribute meaningfully to these fields. Artificial Intelligence in the Age of Nanotechnology is a transformative solution meticulously crafted to address the academic community's knowledge gaps and challenges. This comprehensive book serves as the guiding light for scholars, researchers, and students grappling with the dynamic synergy between AI and Nanotechnology. It offers a structured and authoritative exploration of the core principles and transformative applications of these domains across diverse fields. By providing clarity and depth, it empowers academics to stay at the forefront of innovation and make informed contributions.
Download or read book Automated Nanohandling by Microrobots written by Sergej Fatikow and published by Springer Science & Business Media. This book was released on 2008 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to robot-based nanohandling. It presents work on the development of a versatile microrobot-based nanohandling robot station inside a scanning electron microscope (SEM). Those unfamiliar with the subject will find the text, which is complemented throughout by the extensive use of illustrations, clear and simple to understand. The author has published two books and numerous papers in the field, and holds more than 50 patents.
Download or read book Atomic Force Microscopy Based Nanorobotics written by Hui Xie and published by Springer. This book was released on 2011-09-25 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: The atomic force microscope (AFM) has been successfully used to perform nanorobotic manipulation operations on nanoscale entities such as particles, nanotubes, nanowires, nanocrystals, and DNA since 1990s. There have been many progress on modeling, imaging, teleoperated or automated control, human-machine interfacing, instrumentation, and applications of AFM based nanorobotic manipulation systems in literature. This book aims to include all of such state-of-the-art progress in an organized, structured, and detailed manner as a reference book and also potentially a textbook in nanorobotics and any other nanoscale dynamics, systems and controls related research and education. Clearly written and well-organized, this text introduces designs and prototypes of the nanorobotic systems in detail with innovative principles of three-dimensional manipulation force microscopy and parallel imaging/manipulation force microscopy.
Download or read book Springer Handbook of Nanotechnology written by Bharat Bhushan and published by Springer. This book was released on 2017-11-05 with total page 1500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook has become the definitive reference work in the field of nanoscience and nanotechnology, and this 4th edition incorporates a number of recent new developments. It integrates nanofabrication, nanomaterials, nanodevices, nanomechanics, nanotribology, materials science, and reliability engineering knowledge in just one volume. Furthermore, it discusses various nanostructures; micro/nanofabrication; micro/nanodevices and biomicro/nanodevices, as well as scanning probe microscopy; nanotribology and nanomechanics; molecularly thick films; industrial applications and nanodevice reliability; societal, environmental, health and safety issues; and nanotechnology education. In this new edition, written by an international team of over 140 distinguished experts and put together by an experienced editor with a comprehensive understanding of the field, almost all the chapters are either new or substantially revised and expanded, with new topics of interest added. It is an essential resource for anyone working in the rapidly evolving field of key technology, including mechanical and electrical engineers, materials scientists, physicists, and chemists.
Download or read book Selected Topics in Micro Nano robotics for Biomedical Applications written by Yi Guo and published by Springer Science & Business Media. This book was released on 2012-09-25 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro/Nano-robotics for Biomedical Applications features a system approach and incorporates modern methodologies in autonomous mobile robots for programmable and controllable micro/nano-robots aiming at biomedical applications. The book provides chapters of instructional materials in micro/nanorobotics for biomedical applications. The book features lecture units on micro/nanorobot components and techniques, including sensors, actuator, power supply, and micro/nano-fabrication and assembly. It also contains case studies on using micro/nano-robots in biomedical environments and in biomedicine, as well as a design example to conceptually develop a Vitamin-pill sized robot to enter human’s gastrointestinal tract. Laboratory modules to teach robot navigation and cooperation methods suitable to biomedical applications will be also provided based on existing simulation and robot platforms.
Download or read book Handbook of Nanophysics written by Klaus D. Sattler and published by CRC Press. This book was released on 2010-09-17 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tools of nanodiagnostics, nanotherapy, and nanorobotics are expected to revolutionize the future of medicine, leading to presymptomatic diagnosis of disease, highly effective targeted treatment therapy, and minimum side effects. Handbook of Nanophysics: Nanomedicine and Nanorobotics presents an up-to-date overview of the application of nan
Download or read book Biologically Inspired Robotics written by Yunhui Liu and published by CRC Press. This book was released on 2011-12-21 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robotic engineering inspired by biology—biomimetics—has many potential applications: robot snakes can be used for rescue operations in disasters, snake-like endoscopes can be used in medical diagnosis, and artificial muscles can replace damaged muscles to recover the motor functions of human limbs. Conversely, the application of robotics technology to our understanding of biological systems and behaviors—biorobotic modeling and analysis—provides unique research opportunities: robotic manipulation technology with optical tweezers can be used to study the cell mechanics of human red blood cells, a surface electromyography sensing system can help us identify the relation between muscle forces and hand movements, and mathematical models of brain circuitry may help us understand how the cerebellum achieves movement control. Biologically Inspired Robotics contains cutting-edge material—considerably expanded and with additional analysis—from the 2009 IEEE International Conference on Robotics and Biomimetics (ROBIO). These 16 chapters cover both biomimetics and biorobotic modeling/analysis, taking readers through an exploration of biologically inspired robot design and control, micro/nano bio-robotic systems, biological measurement and actuation, and applications of robotics technology to biological problems. Contributors examine a wide range of topics, including: A method for controlling the motion of a robotic snake The design of a bionic fitness cycle inspired by the jaguar The use of autonomous robotic fish to detect pollution A noninvasive brain-activity scanning method using a hybrid sensor A rehabilitation system for recovering motor function in human hands after injury Human-like robotic eye and head movements in human–machine interactions A state-of-the-art resource for graduate students and researchers in the fields of control engineering, robotics, and biomedical engineering, this text helps readers understand the technology and principles in this emerging field.
Download or read book Nanorobotics written by Fouad Sabry and published by One Billion Knowledgeable. This book was released on 2022-08-09 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: What Is Nanorobotics An emerging area of technology known as nanoid robotics, often known as nanorobotics or nanobotics for short, is the process of building machines or robots using components that are on the nanometer size or very close to it. To be more exact, the term "nanorobotics" refers to the engineering field of nanotechnology that focuses on the design and construction of nanorobots. These nanorobots have devices that range in size from 0.1 to 10 micrometers and are built from nanoscale or molecular components. Nanobot, nanoid, nanite, nanomachine, and nanomite are a few of the other names that have been thrown about to designate similar machines that are now the subject of study and development. How You Will Benefit (I) Insights, and validations about the following topics: Chapter 1: Nanorobotics Chapter 2: Molecular nanotechnology Chapter 3: Nanotechnology Chapter 4: Nanomedicine Chapter 5: Nanomotor Chapter 6: Molecular machine Chapter 7: Nanobiotechnology Chapter 8: Nanotechnology in fiction Chapter 9: DNA origami Chapter 10: Impact of nanotechnology Chapter 11: Molecular biophysics Chapter 12: Nanoelectronics Chapter 13: Outline of nanotechnology Chapter 14: NanoMission Chapter 15: DNA nanotechnology Chapter 16: Drexler-Smalley debate on molecular nanotechnology Chapter 17: Applications of nanotechnology Chapter 18: DNA walker Chapter 19: Institute for Bioengineering of Catalonia Chapter 20: Glossary of nanotechnology Chapter 21: Hamid Ghandehari (II) Answering the public top questions about nanorobotics. (III) Real world examples for the usage of nanorobotics in many fields. (IV) 17 appendices to explain, briefly, 266 emerging technologies in each industry to have 360-degree full understanding of nanorobotics' technologies. Who This Book Is For Professionals, undergraduate and graduate students, enthusiasts, hobbyists, and those who want to go beyond basic knowledge or information for any kind of nanorobotics.
Download or read book Encyclopedia Of Medical Robotics The In 4 Volumes written by and published by World Scientific. This book was released on 2018-08-28 with total page 1555 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Encyclopedia of Medical Robotics combines contributions in four distinct areas of Medical robotics, namely: Minimally Invasive Surgical Robotics, Micro and Nano Robotics in Medicine, Image-guided Surgical Procedures and Interventions, and Rehabilitation Robotics. The volume on Minimally Invasive Surgical Robotics focuses on robotic technologies geared towards challenges and opportunities in minimally invasive surgery and the research, design, implementation and clinical use of minimally invasive robotic systems. The volume on Micro and Nano robotics in Medicine is dedicated to research activities in an area of emerging interdisciplinary technology that is raising new scientific challenges and promising revolutionary advancement in applications such as medicine and biology. The size and range of these systems are at or below the micrometer scale and comprise assemblies of micro and nanoscale components. The volume on Image-guided Surgical Procedures and Interventions focuses primarily on the use of image guidance during surgical procedures and the challenges posed by various imaging environments and how they related to the design and development of robotic systems as well as their clinical applications. This volume also has significant contributions from the clinical viewpoint on some of the challenges in the domain of image-guided interventions. Finally, the volume on Rehabilitation Robotics is dedicated to the state-of-the-art of an emerging interdisciplinary field where robotics, sensors, and feedback are used in novel ways to re-learn, improve, or restore functional movements in humans.Volume 1, Minimally Invasive Surgical Robotics, focuses on an area of robotic applications that was established in the late 1990s, after the first robotics-assisted minimally invasive surgical procedure. This area has since received significant attention from industry and researchers. The teleoperated and ergonomic features of these robotic systems for minimally invasive surgery (MIS) have been able to reduce or eliminate most of the drawbacks of conventional (laparoscopic) MIS. Robotics-assisted MIS procedures have been conducted on over 3 million patients to date — primarily in the areas of urology, gynecology and general surgery using the FDA approved da Vinci® surgical system. The significant commercial and clinical success of the da Vinci® system has resulted in substantial research activity in recent years to reduce invasiveness, increase dexterity, provide additional features such as image guidance and haptic feedback, reduce size and cost, increase portability, and address specific clinical procedures. The area of robotic MIS is therefore in a state of rapid growth fueled by new developments in technologies such as continuum robotics, smart materials, sensing and actuation, and haptics and teleoperation. An important need arising from the incorporation of robotic technology for surgery is that of training in the appropriate use of the technology, and in the assessment of acquired skills. This volume covers the topics mentioned above in four sections. The first section gives an overview of the evolution and current state the da Vinci® system and clinical perspectives from three groups who use it on a regular basis. The second focuses on the research, and describes a number of new developments in surgical robotics that are likely to be the basis for the next generation of robotic MIS systems. The third deals with two important aspects of surgical robotic systems — teleoperation and haptics (the sense of touch). Technology for implementing the latter in a clinical setting is still very much at the research stage. The fourth section focuses on surgical training and skills assessment necessitated by the novelty and complexity of the technologies involved and the need to provide reliable and efficient training and objective assessment in the use of robotic MIS systems.In Volume 2, Micro and Nano Robotics in Medicine, a brief historical overview of the field of medical nanorobotics as well as the state-of-the-art in the field is presented in the introductory chapter. It covers the various types of nanorobotic systems, their applications and future directions in this field. The volume is divided into three themes related to medical applications. The first theme describes the main challenges of microrobotic design for propulsion in vascular media. Such nanoscale robotic agents are envisioned to revolutionize medicine by enabling minimally invasive diagnostic and therapeutic procedures. To be useful, nanorobots must be operated in complex biological fluids and tissues, which are often difficult to penetrate. In this section, a collection of four papers review the potential medical applications of motile nanorobots, catalytic-based propelling agents, biologically-inspired microrobots and nanoscale bacteria-enabled autonomous drug delivery systems. The second theme relates to the use of micro and nanorobots inside the body for drug-delivery and surgical applications. A collection of six chapters is presented in this segment. The first chapter reviews the different robot structures for three different types of surgery, namely laparoscopy, catheterization, and ophthalmic surgery. It highlights the progress of surgical microrobotics toward intracorporeally navigated mechanisms for ultra-minimally invasive interventions. Then, the design of different magnetic actuation platforms used in micro and nanorobotics are described. An overview of magnetic actuation-based control methods for microrobots, with eventually biomedical applications, is also covered in this segment. The third theme discusses the various nanomanipulation strategies that are currently used in biomedicine for cell characterization, injection, fusion and engineering. In-vitro (3D) cell culture has received increasing attention since it has been discovered to provide a better simulation environment of in-vivo cell growth. Nowadays, the rapid progress of robotic technology paves a new path for the highly controllable and flexible 3D cell assembly. One chapter in this segment discusses the applications of micro-nano robotic techniques for 3D cell culture using engineering approaches. Because cell fusion is important in numerous biological events and applications, such as tissue regeneration and cell reprogramming, a chapter on robotic-tweezers cell manipulation system to achieve precise laser-induced cell fusion using optical trapping has been included in this volume. Finally, the segment ends with a chapter on the use of novel MEMS-based characterization of micro-scale tissues instead of mechanical characterization for cell lines studies.Volume 3, Image-guided Surgical Procedures and Interventions, focuses on several aspects ranging from understanding the challenges and opportunities in this domain, to imaging technologies, to image-guided robotic systems for clinical applications. The volume includes several contributions in the area of imaging in the areas of X-Ray fluoroscopy, CT, PET, MR Imaging, Ultrasound imaging, and optical coherence tomography. Ultrasound-based diagnostics and therapeutics as well as ultrasound-guided planning and navigation are also included in this volume in addition to multi-modal imaging techniques and its applications to surgery and various interventions. The application of multi-modal imaging and fusion in the area of prostate biopsy is also covered. Imaging modality compatible robotic systems, sensors and actuator technologies for use in the MRI environment are also included in this work., as is the development of the framework incorporating image-guided modeling for surgery and intervention. Finally, there are several chapters in the clinical applications domain covering cochlear implant surgery, neurosurgery, breast biopsy, prostate cancer treatment, endovascular interventions, neurovascular interventions, robotic capsule endoscopy, and MRI-guided neurosurgical procedures and interventions.Volume 4, Rehabilitation Robotics, is dedicated to the state-of-the-art of an emerging interdisciplinary field where robotics, sensors, and feedback are used in novel ways to relearn, improve, or restore functional movements in humans. This volume attempts to cover a number of topics relevant to the field. The first section addresses an important activity in our daily lives: walking, where the neuromuscular system orchestrates the gait, posture, and balance. Conditions such as stroke, vestibular deficits, or old age impair this important activity. Three chapters on robotic training, gait rehabilitation, and cooperative orthoses describe the current works in the field to address this issue. The second section covers the significant advances in and novel designs of soft actuators and wearable systems that have emerged in the area of prosthetic lower limbs and ankles in recent years, which offer potential for both rehabilitation and human augmentation. These are described in two chapters. The next section addresses an important emphasis in the field of medicine today that strives to bring rehabilitation out from the clinic into the home environment, so that these medical aids are more readily available to users. The current state-of-the-art in this field is described in a chapter. The last section focuses on rehab devices for the pediatric population. Their impairments are life-long and rehabilitation robotics can have an even bigger impact during their lifespan. In recent years, a number of new developments have been made to promote mobility, socialization, and rehabilitation among the very young: the infants and toddlers. These aspects are summarized in two chapters of this volume.