Download or read book Introduction to Mobile Network Engineering GSM 3G WCDMA LTE and the Road to 5G written by Alexander Kukushkin and published by John Wiley & Sons. This book was released on 2018-09-04 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes and surveys current LTE technical specifications and implementation options for engineers and newly qualified support staff Concentrating on three mobile communication technologies, GSM, 3G-WCDMA, and LTE—while majorly focusing on Radio Access Network (RAN) technology—this book describes principles of mobile radio technologies that are used in mobile phones and service providers’ infrastructure supporting their operation. It introduces some basic concepts of mobile network engineering used in design and rollout of the mobile network. It then follows up with principles, design constraints, and more advanced insights into radio interface protocol stack, operation, and dimensioning for three major mobile network technologies: Global System Mobile (GSM) and third (3G) and fourth generation (4G) mobile technologies. The concluding sections of the book are concerned with further developments toward next generation of mobile network (5G). Those include some of the major features of 5G such as a New Radio, NG-RAN distributed architecture, and network slicing. The last section describes some key concepts that may bring significant enhancements in future technology and services experienced by customers. Introduction to Mobile Network Engineering: GSM, 3G-WCDMA, LTE and the Road to 5G covers the types of Mobile Network by Multiple Access Scheme; the cellular system; radio propagation; mobile radio channel; radio network planning; EGPRS - GPRS/EDGE; Third Generation Network (3G), UMTS; High Speed Packet data access (HSPA); 4G-Long Term Evolution (LTE) system; LTE-A; and Release 15 for 5G. Focuses on Radio Access Network technologies which empower communications in current and emerging mobile network systems Presents a mix of introductory and advanced reading, with a generalist view on current mobile network technologies Written at a level that enables readers to understand principles of radio network deployment and operation Based on the author’s post-graduate lecture course on Wireless Engineering Fully illustrated with tables, figures, photographs, working examples with problems and solutions, and section summaries highlighting the key features of each technology described Written as a modified and expanded set of lectures on wireless engineering taught by the author, Introduction to Mobile Network Engineering: GSM, 3G-WCDMA, LTE and the Road to 5G is an ideal text for post-graduate and graduate students studying wireless engineering, and industry professionals requiring an introduction or refresher to existing technologies.

Download or read book Mobile Communications Engineering Theory and Applications written by William C. Y. Lee and published by McGraw Hill Professional. This book was released on 1997-10-22 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: From one of the field’s foremost educators, here is the classic guide to mobile communication—fully revised for the 1990s and beyond. It is unique because it shows readers how to understand the differences in applying technologies between wireline communications and wireless communications. The new second edition extensively updates the basics. It also coves traffic and capacity analysis on mobile communications networks and addresses rapidly expanding new technologies, such as digital cellular, PCS, and multiple access techniques not only including FDMA, TDMA, CDMA, and SDMA, but also applying the techniques on the virtual channels.

Download or read book Introduction to Mobile Communications Engineering written by José M. Hernando and published by Artech House Publishers. This book was released on 1999 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a concise introduction to mobile communications engineering with an emphasis on radio propagation and systems design, there's no better source than this book. It contains coverage of all kinds of mobile systems--PMR, PAMR, and cellular--complete with system descriptions, planning aspects, and practical engineering data, plus up-to-the-minute information about the most recent systems.

Download or read book Introduction to Mobile Communications written by Tony Wakefield and published by CRC Press. This book was released on 2007-04-19 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: The traditionally separate Fixed, Mobile, and Internet sectors have been evolving recently toward a single sector, offering numerous implications for those involved in technology and business. It is therefore essential for telecommunication professionals to get a keen grasp of where the industry is heading. Providing a solid foundation in the industry, Introduction to Mobile Communications: Technology, Services, Markets explores the core requirements of modern mobile telecommunications-from markets to technology. It explains how wireless systems work, how mobility is supported, the underlying infrastructure, and what interactions are needed among the different functional components. The book also examines how mobile communications are evolving in order to meet the changing needs of users. The information provided in the book comes primarily from the four core modules of the Certificate in Mobile Communications Distance Learning program run by the Informa Telecoms Academy in London. Designed by a highly experienced training development team, the program examines the complex and fascinating world of mobile communications. Designed to give a broad picture of mobile communications, the book provides an excellent grounding for those involved in both business and engineering-leaving them much better equipped to fulfill roles within their current or prospective companies

Download or read book Principles of Mobile Communication written by Gordon L. Stüber and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of Mobile Communication provides an authoritative treatment of the fundamentals of mobile communications, one of the fastest growing areas of the modern telecommunications industry. The book stresses the fundamentals of mobile communications engineering that are important for the design of any mobile system. Less emphasis is placed on the description of existing and proposed wireless standards. This focus on fundamental issues should be of benefit not only to students taking formal instruction but also to practising engineers who are likely to already have a detailed familiarity with the standards and are seeking to deepen their knowledge of this important field. The book stresses mathematical modeling and analysis, rather than providing a qualitative overview. It has been specifically developed as a textbook for graduate level instruction and a reference book for practising engineers and those seeking to pursue research in the area. The book contains sufficient background material for the novice, yet enough advanced material for a sequence of graduate level courses. Principles of Mobile Communication treats a variety of contemporary issues, many of which have been treated before only in the journals. Some material in the book has never appeared before in the literature. The book provides an up-to-date treatment of the subject area at a level of detail that is not available in other books. Also, the book is unique in that the whole range of topics covered is not presently available in any other book. Throughout the book, detailed derivations are provided and extensive references to the literature are made. This is of value to the reader wishing to gain detailed knowledge of a particular topic.

Download or read book Introduction to 3G Mobile Communications written by Juha Korhonen and published by Artech House. This book was released on 2003 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised edition provides professionals with an up-to-date introduction to third generation (3G) mobile communication system principles, concepts, and applications, without the use of advanced mathematics. This newly revised edition of an Artech House bestseller provides professionals with an up-to-date introduction to third generation (3G) mobile communication system principles, concepts, and applications, without the use of advanced mathematics. The second edition ncludes an even more thorough treatment of potential 3G applications and descriptions of new, emerging technologies.

Download or read book Channels Propagation and Antennas for Mobile Communications written by Rodney Vaughan and published by IET. This book was released on 2003-02-03 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: This exceptional book introduces the reader to the principles, theory and applications of physical layer wireless/mobile communications, applicators and millimetric antennas.

Download or read book Mobile Communications Systems Development written by Rajib Taid and published by John Wiley & Sons. This book was released on 2021-04-26 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough introduction to the development, operation, maintenance, and troubleshooting of mobile communications systems Mobile Communications Systems Development: A Practical Introduction for System Understanding, Implementation, and Deployment is a comprehensive “how to” manual for mobile communications system design, deployment, and support. Providing a detailed overview of end-to-end system development, the book encompasses operation, maintenance, and troubleshooting of currently available mobile communication technologies and systems. Readers are introduced to different network architectures, standardization, protocols, and functions including 2G, 3G, 4G, and 5G networks, and the 3GPP standard. In-depth chapters cover the entire protocol stack from the Physical (PHY) to the Application layer, discuss theoretical and practical considerations, and describe software implementation based on the 3GPP standardized technical specifications. The book includes figures, tables, and sample computer code to help readers thoroughly comprehend the functions and underlying concepts of a mobile communications network. Each chapter includes an introduction to the topic and a chapter summary. A full list of references, and a set of exercises are also provided at the end of the book to test comprehension and strengthen understanding of the material. Written by a respected professional with more than 20 years’ experience in the field, this highly practical guide: Provides detailed introductory information on GSM, GPRS, UMTS, and LTE mobile communications systems and networks Describes the various aspects and areas of the LTE system air interface and its protocol layers Covers troubleshooting and resolution of mobile communications systems and networks issues Discusses the software and hardware platforms used for the development of mobile communications systems network elements Includes 5G use cases, enablers, and architectures that cover the 5G NR (New Radio) and 5G Core Network Mobile Communications Systems Development is perfect for graduate and postdoctoral students studying mobile communications and telecom design, electronic engineering undergraduate students in their final year, research and development engineers, and network operation and maintenance personnel.

Download or read book Mobile and Wireless Communications written by Salma Ait Fares and published by BoD – Books on Demand. This book was released on 2010-01-01 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mobile and wireless communications applications have a clear impact on improving the humanity wellbeing. From cell phones to wireless internet to home and office devices, most of the applications are converted from wired into wireless communication. Smart and advanced wireless communication environments represent the future technology and evolutionary development step in homes, hospitals, industrial, vehicular and transportation systems. A very appealing research area in these environments has been the wireless ad hoc, sensor and mesh networks. These networks rely on ultra low powered processing nodes that sense surrounding environment temperature, pressure, humidity, motion or chemical hazards, etc. Moreover, the radio frequency (RF) transceiver nodes of such networks require the design of transmitter and receiver equipped with high performance building blocks including antennas, power and low noise amplifiers, mixers and voltage controlled oscillators. Nowadays, the researchers are facing several challenges to design such building blocks while complying with ultra low power consumption, small area and high performance constraints. CMOS technology represents an excellent candidate to facilitate the integration of the whole transceiver on a single chip. However, several challenges have to be tackled while designing and using nanoscale CMOS technologies and require innovative idea from researchers and circuits designers. While major researchers and applications have been focusing on RF wireless communication, optical wireless communication based system has started to draw some attention from researchers for a terrestrial system as well as for aerial and satellite terminals. This renewed interested in optical wireless communications is driven by several advantages such as no licensing requirements policy, no RF radiation hazards, and no need to dig up roads besides its large bandwidth and low power consumption. This second part of the book, Mobile and Wireless Communications: Key Technologies and Future Applications, covers the recent development in ad hoc and sensor networks, the implementation of state of the art of wireless transceivers building blocks and recent development on optical wireless communication systems. We hope that this book will be useful for students, researchers and practitioners in their research studies.

Download or read book Fundamentals of Wireless Communication written by David Tse and published by Cambridge University Press. This book was released on 2005-05-26 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook takes a unified view of the fundamentals of wireless communication and explains cutting-edge concepts in a simple and intuitive way. An abundant supply of exercises make it ideal for graduate courses in electrical and computer engineering and it will also be of great interest to practising engineers.

Download or read book Wireless Communications Systems written by Randy L. Haupt and published by John Wiley & Sons. This book was released on 2019-12-17 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction to the fundamentals of design and applications of wireless communications Wireless Communications Systems starts by explaining the fundamentals needed to understand, design, and deploy wireless communications systems. The author, a noted expert on the topic, explores the basic concepts of signals, modulation, antennas, and propagation with a MATLAB emphasis. The book emphasizes practical applications and concepts needed by wireless engineers. The author introduces applications of wireless communications and includes information on satellite communications, radio frequency identification, and offers an overview with practical insights into the topic of multiple input multiple output (MIMO). The book also explains the security and health effects of wireless systems concerns on users and designers. Designed as a practical resource, the text contains a range of examples and pictures that illustrate many different aspects of wireless technology. The book relies on MATLAB for most of the computations and graphics. This important text: Reviews the basic information needed to understand and design wireless communications systems Covers topics such as MIMO systems, adaptive antennas, direction finding, wireless security, internet of things (IoT), radio frequency identification (RFID), and software defined radio (SDR) Provides examples with a MATLAB emphasis to aid comprehension Includes an online solutions manual and video lectures on selected topics Written for students of engineering and physics and practicing engineers and scientists, Wireless Communications Systems covers the fundamentals of wireless engineering in a clear and concise manner and contains many illustrative examples.

Download or read book The Telecommunications Handbook written by Jyrki T. J. Penttinen and published by John Wiley & Sons. This book was released on 2015-01-13 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook and reference provides a complete understanding of the telecommunications field supported by descriptions and case examples throughout Taking a practical approach, The Telecommunications Handbook examines the principles and details of all of the major and modern telecommunications systems currently available to industry and to end-users. It gives essential information about usage, architectures, functioning, planning, construction, measurements and optimisation. The structure of the book is modular, giving both overall descriptions of the architectures and functionality of typical use cases, as well as deeper and practical guidelines for telecom professionals. The focus of the book is on current and future networks, and the most up-to-date functionalities of each network are described in sufficient detail for deployment purposes. The contents include an introduction to each technology, its evolution path, feasibility and utilization, solution and network architecture, and technical functioning of the systems (signalling, coding, different modes for channel delivery and security of core and radio system). The planning of the core and radio networks (system-specific field test measurement guidelines, hands-on network planning advices and suggestions for the parameter adjustments) and future systems are also described. Each chapter covers aspects individually for easy reference, including approaches such as: functional blocks, protocol layers, hardware and software, planning, optimization, use cases, challenges, solutions to potential problems Provides very practical detail on the planning and operation of networks to enable readers to apply the content in real-world deployments Bridges the gap between the communications in the academic context and the practical knowledge and skills needed to work in the telecommunications industry Section divisions include: General theory; Fixed telecommunications; Mobile communications; Space communications; Other and special communications; and Planning and management of telecommunication networks Covers new commercial and enhanced systems deployed, such as IPv6 based networks, LTE-Advanced and GALILEO An essential reference for Technical personnel at telecom operators; equipment and terminal manufacturers; Engineers working for network operators.

Download or read book An Introduction to LTE written by Christopher Cox and published by John Wiley & Sons. This book was released on 2014-05-12 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following on from the successful first edition (March 2012), this book gives a clear explanation of what LTE does and how it works. The content is expressed at a systems level, offering readers the opportunity to grasp the key factors that make LTE the hot topic amongst vendors and operators across the globe. The book assumes no more than a basic knowledge of mobile telecommunication systems, and the reader is not expected to have any previous knowledge of the complex mathematical operations that underpin LTE. This second edition introduces new material for the current state of the industry, such as the new features of LTE in Releases 11 and 12, notably coordinated multipoint transmission and proximity services; the main short- and long-term solutions for LTE voice calls, namely circuit switched fallback and the IP multimedia subsystem; and the evolution and current state of the LTE market. It also extends some of the material from the first edition, such as inter-operation with other technologies such as GSM, UMTS, wireless local area networks and cdma2000; additional features of LTE Advanced, notably heterogeneous networks and traffic offloading; data transport in the evolved packet core; coverage and capacity estimation for LTE; and a more rigorous treatment of modulation, demodulation and OFDMA. The author breaks down the system into logical blocks, by initially introducing the architecture of LTE, explaining the techniques used for radio transmission and reception and the overall operation of the system, and concluding with more specialized topics such as LTE voice calls and the later releases of the specifications. This methodical approach enables readers to move on to tackle the specifications and the more advanced texts with confidence.

Download or read book Wireless and Cellular Communications written by William C. Y. Lee and published by McGraw Hill Professional. This book was released on 2005-11-16 with total page 851 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product.The wireless pioneer William C.Y. Lee, technology leader and author of the #1 book on wireless communications, has now completely updated his classic. This all-new, in-depth engineering guide for both voice and data services, Wi-Fi, 3G, WiMAX, and more, is essential reading for anyone working in this dynamic field. On-the-ground engineering coverage of B2G, 3G, B3G, 4G, and all other major systems Specifications for AMPS, GSM Family, iDEN, PHS, cdmaOne, WCDMA, HSDPA, CDMA2000, EV-DO, EV-DV, TD-SCDMA, Wi-Fi, WiMAX, etc. Antenna specifications for base stations and handsets Introduction of new technologies -- CS-OFDM, MIMO, LDPC, Turbo Code, CCK Code, RFID, etc. Engineering parameters for portable systems, Wi-Fi, Bluetooth, UWB, ZigBee, IR, and more Intelligent Cells -- All IP, in-building systems, etc. Intelligent Networks -- All IP, ad hoc, mesh, sensor, etc. Switches -- Circuit, Packet, ATM, Soft, etc. INSIDE: INSIGHTFUL, IN-DEPTH ENGINEERING * Introduction to Wireless Communications * Introduction to Cellular Systems * Specification of Analog Cellular Systems * Specification of Digital Cellular Systems * Specification of Newly Mobile Systems * Specification of WLAN and WMAN Systems * Cell Coverage and Antennas * Cochannel Interference * Types of Noncochannel Interference * Frequency Management and Channel Assignment * Handoffs and Dropped Calls * Operational Technology and Techniques * Switching and Traffic * Data Links and Microwaves * System Evaluations * Intelligent Cell Concept * Intelligent and All-IP Networks * Mobile Communications-Related Topics * 4G Perspectives

Download or read book Cellular Communications written by Nishith Tripathi and published by John Wiley & Sons. This book was released on 2014-09-12 with total page 871 pages. Available in PDF, EPUB and Kindle. Book excerpt: Even as newer cellular technologies and standards emerge, many of the fundamental principles and the components of the cellular network remain the same. Presenting a simple yet comprehensive view of cellular communications technologies, Cellular Communications provides an end-to-end perspective of cellular operations, ranging from physical layer details to call set-up and from the radio network to the core network. This self-contained source for practitioners and students represents a comprehensive survey of the fundamentals of cellular communications and the landscape of commercially deployed 2G and 3G technologies and provides a glimpse of emerging 4G technologies.

Download or read book Mobile Communications written by Rich Ling and published by Springer Science & Business Media. This book was released on 2006-01-12 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text surveys some of the broader issues associated with the adoption and use of mobile communication, including communication in public versus private space, cultural differences in mobile communication, and psychological perspectives on the adoption of mobile communication technology.

Download or read book Video Coding for Mobile Communications written by Mohammed Al-Mualla and published by Elsevier. This book was released on 2002-05-13 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order for wireless devices to function, the signals must be coded in standard ways so that the sender and the receiver can communicate. This area of video source coding is one of the key challenges in the worldwide push to deliver full video communications over wireless devices. Video Coding for Mobile Communications reviews current progress in this field and looks at how to solve some of the most important technology issues in the months and years ahead. The vision of being able to communicate from anywhere, at any time, and with any type of information is on its way to becoming reality. This natural convergence of mobile communications and multimedia is a field that is expected to achieve unprecedented growth and commercial success. Current wireless communication devices support a number of basic multimedia services (voice, messages, basic internet access), but have coding problems that need to be solved before "real-time" mobile video communication can be achieved. - Addresses the emerging field of mobile multimedia communications