Download or read book Metallography in Archaeology and Art written by David A. Scott and published by Springer Nature. This book was released on 2019-08-30 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to the metallographic study of ancient metals. Metallography is important both conceptually as a microstructural science and in terms of its application to the study of ancient and historic metals. Metallography is a well-established methodology for the characterization of the microstructure of metals, which continues to be significant today in quality control and characterization of metallic properties. Not only does the metallographic examination of ancient metals present its own challenges in terms of sample size and interpretation of evidence, but it must be integrated with archaeological data and cultural research in order to obtain the most meaningful results. Issues of authentication and the establishment of fakes and forgeries of metallic artefacts often involve metallographic evidence of both metal and patina or corrosion interface, as an essential component of such a study. The present volume sets out the basic features of relevant metallic systems, enhanced with a series of examples of typical microstructural types, with illustrative case studies and examples throughout the text derived from studies undertaken by the two authors. This book provides a comprehensive presentation of metallography for archaeologists, archaeometallurgists, conservators, conservation scientists and metallurgists of modern materials.
Download or read book Metallography and Microstructure in Ancient and Historic Metals written by David A. Scott and published by Getty Publications. This book was released on 1992-01-02 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: David A. Scott provides a detailed introduction to the structure and morphology of ancient and historic metallic materials. Much of the scientific research on this important topic has been inaccessible, scattered throughout the international literature, or unpublished; this volume, although not exhaustive in its coverage, fills an important need by assembling much of this information in a single source. Jointly published by the GCI and the J. Paul Getty Museum, the book deals with many practical matters relating to the mounting, preparation, etching, polishing, and microscopy of metallic samples and includes an account of the way in which phase diagrams can be used to assist in structural interpretation. The text is supplemented by an extensive number of microstructural studies carried out in the laboratory on ancient and historic metals. The student beginning the study of metallic materials and the conservation scientist who wishes to carry out structural studies of metallic objects of art will find this publication quite useful.
Download or read book Metallography of Steels Interpretation of Structure and the Effects of Processing written by Hubertus Colpaert and published by ASM International. This book was released on 2018-08-01 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated and translated by André Luiz V. da Costa e Silva This book is a combination of a metallographic atlas for steels and cast irons and an introductory textbook covering the fundamentals of phase transformations and heat treatment of these materials. Every important stage of processing, from casting to cold working is clearly discussed and copiously illustrated with metallographs that show the obtained structures, both desired and those achieved when deviations occur. First published in 1951 by Professor Hubertus Colpaert from the Institute for Technological Research (IPT) of São Paulo, Brazil, this book became one of the most important Brazilian references for professionals interested in the processing, treatment, and application of steels and cast irons. In the Fourth Edition and English translation, updated and translated by Professor André Luiz V. da Costa e Silva, the concept of the of the original edition was preserved while the important developments of recent decades, both in metallographic characterization and in steel and iron products, as well as progress in the understanding of the transformations that made the extraordinary developments of these alloys possible, were added. Most metallographs are of actual industrial materials and a large number originate from industry leaders or laboratories at the forefront of steel and iron development. As steel continues to be the most widely used metallic material in the world, Metallography of Steels continues to be an essential reference for students, metallographers, and engineers interested in understanding processing-properties-structure relationships of the material. The balance between theoretical and applied information makes this book a valuable companion for even experienced steel practitioners.
Download or read book An Introduction to Metallurgical Laboratory Techniques written by P. G. Ormandy and published by Elsevier. This book was released on 2016-11-21 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pergamon Series of Monographs in Laboratory Techniques, Volume 3: An Introduction to Metallurgical Laboratory Techniques covers improved methods and techniques in metallurgy relating to the practical aspects of laboratory work, by experimentation, practice and experience. The book discusses metallography, high temperature, heat treatment, and testing of materials. The text also describes vacuum techniques, powder metallurgy, and joining of metals. Physical metallurgists and students taking related courses will find the book invaluable.
Download or read book An Introduction to the Study of Metallography and Macrography written by Léon Guillet and published by . This book was released on 1922 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to the Physical Metallurgy of Welding written by Kenneth Easterling and published by Elsevier. This book was released on 2013-09-17 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to the Physical Metallurgy of Welding deals primarily with the welding of steels, which reflects the larger volume of literature on this material; however, many of the principles discussed can also be applied to other alloys. The book is divided into four chapters, in which the middle two deal with the microstructure and properties of the welded joint, such as the weld metal and the heat-affected zone. The first chapter is designed to provide a wider introduction to the many process variables of fusion welding, particularly those that may influence microstructure and properties, while the final chapter is concerned with cracking and fracture in welds. A comprehensive case study of the Alexander Kielland North Sea accommodation platform disaster is also discussed at the end. The text is written for undergraduate or postgraduate courses in departments of metallurgy, materials science, or engineering materials. The book will also serve as a useful revision text for engineers concerned with welding problems in industry.
Download or read book Metallographer s Guide written by B. L. Bramfitt and published by ASM International. This book was released on 2001-01-01 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a solid overview of the important metallurgical concepts related to the microstructures of irons and steels, and it provides detailed guidelines for the proper metallographic techniques used to reveal, capture, and understand microstructures. This book provides clearly written explanations of important concepts, and step-by-step instructions for equipment selection and use, microscopy techniques, specimen preparation, and etching. Dozens of concise and helpful “metallographic tips” are included in the chapters on laboratory practices and specimen preparation. The book features over 500 representative microstructures, with discussions of how the structures can be altered by heat treatment and other means. A handy index to these images is provided, so the book can also be used as an atlas of iron and steel microstructures.
Download or read book Metallographic Specimen Preparation written by J. McCall and published by Springer. This book was released on 2012-10-20 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: /.letallography is much more than taking striking pictures at high magnifications or polishing and etching specimens in such a way that no scratches can be seen. Basically, metallography is the physical metallurgist's most useful and most used tool for studying metals. Although it is perhaps his oldest tool, it certainly is not likely to become obsolete. Rather, the continued demands that have been placed upon materials have required more detailed charac terizations of their microstructures and this, in turn, has re quired the metallographer to develop new techniques to make these characterizations. Not too many years ago, the metallographer had only optical microscopes with which to examine his specimens. Now he has elec tron microscopes, scanning electron microscopes, and a whole host of instruments which were unknown to him only a relatively few years ago. This has forced him to learn not only how to use these new instruments and how to interpret the information that they provide but it also has made him develop new techniques for preparing the samples for examination.
Download or read book Interpretation of Metallographic Structures written by James Dvorak and published by Elsevier. This book was released on 2012-12-02 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interpretation of Metallographic Structures, Second Edition describes the features of metallographic structures using an optical reflection microscope. This book is divided into six chapters and starts with an examination of the polycrystalline structures, subgrain boundaries, and an overview of cold and hot working, as well as recrystallization and grain growth. The next chapter explores the metallography of fracture, which involves visual inspection, low-power stereoptic light microscopy, polished-section light-reflection microscopy, and the scanning electron microscope. This topic is followed by discussions of the different types of crystallizations, the mechanism of solid-state transformation, and the diffusion and other transport processes. The last chapter involves the measurement aspects in metallography, including measurement of grain and particles sizes, as well as their distribution. This book is intended primarily to metallurgists and researchers.
Download or read book Metallographic Etching written by G. Petzow and published by . This book was released on 1978 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Aluminium Metallurgy written by Roger Lumley and published by Elsevier. This book was released on 2010-11-25 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium is an important metal in manufacturing, due to its versatile properties and the many applications of both the processed metal and its alloys in different industries. Fundamentals of aluminium metallurgy provides a comprehensive overview of the production, properties and processing of aluminium, and its applications in manufacturing industries.Part one discusses different methods of producing and casting aluminium, covering areas such as casting of alloys, quality issues and specific production methods such as high-pressure diecasting. The metallurgical properties of aluminium and its alloys are reviewed in Part two, with chapters on such topics as hardening, precipitation processes and solute partitioning and clustering, as well as properties such as fracture resistance. Finally, Part three includes chapters on joining, laser sintering and other methods of processing aluminium, and its applications in particular areas of industry such as aerospace.With its distinguished editor and team of expert contributors, Fundamentals of aluminium metallurgy is a standard reference for researchers in metallurgy, as well as all those involved in the manufacture and use of aluminium products. - Provides a comprehensive overview of the production, properties and processing of aluminium, and its applications in manufacturing industries - Considers many issues of central importance in aluminium production and utilization considering quality issues and design for fatigue growth resistance - Metallurgical properties of aluminium and its alloys are further explored with particular reference to work hardening and applications of industrial alloys
Download or read book Introduction to Metallography written by Paul Goerens and published by . This book was released on 1908 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Aluminium Metallurgy written by Roger Lumley and published by Woodhead Publishing. This book was released on 2018-05-22 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Aluminium Metallurgy: Recent Advances updates the very successful book Fundamentals of Aluminium Metallurgy. As the technologies related to casting and forming of aluminum components are rapidly improving, with new technologies generating alternative manufacturing methods that improve competitiveness, this book is a timely resource. Sections provide an overview of recent research breakthroughs, methods and techniques of advanced manufacture, including additive manufacturing and 3D printing, a comprehensive discussion of the status of metalcasting technologies, including sand casting, permanent mold casting, pressure diecastings and investment casting, and recent information on advanced wrought alloy development, including automotive bodysheet materials, amorphous glassy materials, and more. Target readership for the book includes PhD students and academics, the casting industry, and those interested in new industrial opportunities and advanced products. - Includes detailed and specific information on the processing of aluminum alloys, including additive manufacturing and advanced casting techniques - Written for a broad ranging readership, from academics, to those in the industry who need to know about the latest techniques for working with aluminum - Comprehensive, up-to-date coverage, with the most recent advances in the industry
Download or read book Quantitative Stereology written by Ervin E. Underwood and published by Addison-Wesley. This book was released on 1970 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials Characterization written by Yang Leng and published by John Wiley & Sons. This book was released on 2009-03-04 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers state-of-the-art techniques commonly used in modern materials characterization. Two important aspects of characterization, materials structures and chemical analysis, are included. Widely used techniques, such as metallography (light microscopy), X-ray diffraction, transmission and scanning electron microscopy, are described. In addition, the book introduces advanced techniques, including scanning probe microscopy. The second half of the book accordingly presents techniques such as X-ray energy dispersive spectroscopy (commonly equipped in the scanning electron microscope), fluorescence X-ray spectroscopy, and popular surface analysis techniques (XPS and SIMS). Finally, vibrational spectroscopy (FTIR and Raman) and thermal analysis are also covered.
Download or read book Metals Reference Book written by Colin James Smithells and published by . This book was released on 1967 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Metallography written by M. G. Lozinskii and published by Elsevier. This book was released on 2013-09-11 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Metallography focuses on the reactions, processes, methodologies, and approaches involved in high temperature metallography. The publication first offers information on the basic principles of high temperature vacuum metallography, including the methods of heating test specimens in vacuo to high temperatures; specimens for investigating structure and properties of metals by heating in vacuo; and methods of regulating and controlling the temperature of specimens heated in vacuo. The text then ponders on vacuum systems in equipment for investigating the structure and properties of metals and alloys heated at low ultimate pressures, as well as gas flow through the tubes during evacuation; construction and characteristics of vacuum pumps used for high temperature metallography equipment; and approximate calculation of parameters of vacuum systems for equipment intended for investigating metals during heating in a vacuum. The book takes a look at equipment and instruments for investigating metals heated in a vacuum; method of investigation by studying microstructures and properties of metals and alloys while heated in vacuo; and methods for measuring elasticity, internal friction, and hardness, and for investigating the deformation of metals and alloys at high temperatures in vacuo. The text is a dependable reference for readers interested in high temperature metallography.
