Download or read book Introduction to Machining Science written by G. K. Lal and published by New Age International. This book was released on 2007 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: About the Book: This book is an attempt to consolidate the basic scientific studies in the machining area so that fundamental mechanics and other concepts related to primary machining processes could be understood. The book is essentially designed for senior undergraduate mechanical and production engineering students but practicing engineers will also find it useful for tool and product design. The topics covered include plastic deformation, chip formation, tool geometry, mechanics of orthogonal and oblique cutting, measurement of cutting force, cutting temperature, tool wear and tool life, economics of machining, grinding of metals and machining vibrations. The analyses presented have been illustrated through numerical examples. Review questions and bibliography are also included. About the Author: Dr. G.K. Lal has been associated with the Indian Institute of Technology, Kanpur for the past 34 years. He retired as a Professor of Mechanical Engineering in 2003 and had earlier held the positions of Dean (1976-80) and Deputy Director (1982-88). Before joining IIT Kanpur he had taught at the Banaras Hindu University and held research positions at the University of Sherbrooke (Canada) and the Carnegie-Mellon University (USA). He also worked as a Design Engineer with the Abitibi Paper and Power Corp. of Canada.
Download or read book Advanced Machining Processes of Metallic Materials written by Wit Grzesik and published by Elsevier. This book was released on 2016-11-15 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Machining Processes of Metallic Materials: Theory, Modelling and Applications, Second Edition, explores the metal cutting processes with regard to theory and industrial practice. Structured into three parts, the first section provides information on the fundamentals of machining, while the second and third parts include an overview of the effects of the theoretical and experimental considerations in high-level machining technology and a summary of production outputs related to part quality. In particular, topics discussed include: modern tool materials, mechanical, thermal and tribological aspects of machining, computer simulation of various process phenomena, chip control, monitoring of the cutting state, progressive and hybrid machining operations, as well as practical ways for improving machinability and generation and modeling of surface integrity. This new edition addresses the present state and future development of machining technologies, and includes expanded coverage on machining operations, such as turning, milling, drilling, and broaching, as well as a new chapter on sustainable machining processes. In addition, the book provides a comprehensive description of metal cutting theory and experimental and modeling techniques, along with basic machining processes and their effective use in a wide range of manufacturing applications. The research covered here has contributed to a more generalized vision of machining technology, including not only traditional manufacturing tasks, but also potential (emerging) new applications, such as micro and nanotechnology. - Includes new case studies illuminate experimental methods and outputs from different sectors of the manufacturing industry - Presents metal cutting processes that would be applicable for various technical, engineering, and scientific levels - Includes an updated knowledge of standards, cutting tool materials and tools, new machining technologies, relevant machinability records, optimization techniques, and surface integrity
Download or read book Metal Machining written by P.R.N. Childs and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal machining is the most widespread metal-shaping process in the mechanical manufacturing industry. World-wide investment in metal machining tools increases year on year - and the wealth of nations can be judged by it. This text - the most up-to-date in the field - provides in-depth discussion of the theory and application of metal machining at an advanced level. It begins with an overview of the development of metal machining and its role in the current industrial environment and continues with a discussion of the theory and practice of machining. The underlying mechanics are analysed in detail and there are extensive chapters examining applications through a discussion of simulation and process control. "Metal Machining: Theory and Applications" is essential reading for senior undergraduates and postgraduates specialising in cutting technology. It is also an invaluable reference tool for professional engineers. Professors Childs, Maekawa, Obikawa and Yamane are four of the leading authorities on metal machining and have worked together for many years.Of interest to all mechanical, manufacturing and materials engineersTheoretical and practical problems addressed
Download or read book Machining Technology for Composite Materials written by H Hocheng and published by Elsevier. This book was released on 2011-11-28 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machining processes play an important role in the manufacture of a wide variety of components. While the processes required for metal components are well-established, they cannot always be applied to composite materials, which instead require new and innovative techniques. Machining technology for composite materials provides an extensive overview and analysis of both traditional and non-traditional methods of machining for different composite materials.The traditional methods of turning, drilling and grinding are discussed in part one, which also contains chapters analysing cutting forces, tool wear and surface quality. Part two covers non-traditional methods for machining composite materials, including electrical discharge and laser machining, among others. Finally, part three contains chapters that deal with special topics in machining processes for composite materials, such as cryogenic machining and processes for wood-based composites.With its renowned editor and distinguished team of international contributors, Machining technology for composite materials is an essential reference particularly for process designers and tool and production engineers in the field of composite manufacturing, but also for all those involved in the fabrication and assembly of composite structures, including the aerospace, marine, civil and leisure industry sectors. - Provides an extensive overview of machining methods for composite materials - Chapters analyse cutting forces, tool wear and surface quality - Cryogenic machining and processes for wood based composites are discussed
Download or read book Machining Dynamics written by Kai Cheng and published by Springer Science & Business Media. This book was released on 2008-10-26 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machining dynamics play an essential role in the performance of the machine tools and machining processes which directly affect the removal rate, workpiece surface quality and dimensional and form accuracy. Machining Dynamics: Fundamentals and Applications will be bought by advanced undergraduate and postgraduate students studying manufacturing engineering and machining technology in addition to manufacturing engineers, production supervisors, planning and application engineers, and designers.
Download or read book High Speed Machining written by Kapil Gupta and published by Academic Press. This book was released on 2020-01-31 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-Speed Machining covers every aspect of this important subject, from the basic mechanisms of the technology, right through to possible avenues for future research. This book will help readers choose the best method for their particular task, how to set up their equipment to reduce chatter and wear, and how to use simulation tools to model high-speed machining processes. The different applications of each technology are discussed throughout, as are the latest findings by leading researchers in this field. For any researcher looking to understand this topic, any manufacturer looking to improve performance, or any manager looking to upgrade their plant, this is the most comprehensive and authoritative guide available. - Summarizes important R&D from around the world, focusing on emerging topics like intelligent machining - Explains the latest best practice for the optimization of high-speed machining processes for greater energy efficiency and machining precision - Provides practical advice on the testing and monitoring of HSM machines, drawing on practices from leading companies
Download or read book Introduction to Advanced Machining and Finishing Processes written by Golam Kibria and published by . This book was released on 2019-04-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focuses on applications of non-conventional machining processes for advanced machining as well as advanced surface finishing. This book will be invaluable to engineering postgraduate and undergraduate students, practising engineers, and researchers in manufacturing or production discipline.
Download or read book Metal Cutting written by Edward M. Trent and published by Elsevier. This book was released on 2015-06-02 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expanded and revised to include changes and additions to metal cutting theory. Covers developments in tool materials and industrial practice over the last seven years. Describes the stresses and temperatures acting on cutting tools and explains theirinfluence on performance. Discusses tool wear which determines cutting efficiency. Details machinability and control of tool material structure and composition.
Download or read book Manufacturing Processes 1 written by Fritz Klocke and published by Springer Science & Business Media. This book was released on 2011-05-26 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book series on manufacturing processes for engineers is a reference work for scientific and industrial experts. This volume on Turning, Milling and Drilling starts from the basic principles of machining with geometrically defined cutting edges based on a common active principle. In addition, appropriate tool designs as well as the reasonable use of cutting material are presented. A detailed chapter about the machinability of the most important workpiece materials, such as steel and cast iron, light metal alloys and high temperature resistant materials imparts a broad knowledge of the interrelations between workpiece materials, cutting materials and process parameters. This book is in the RWTHedition Series as are the other four volumes of the reference work.
Download or read book Analysis of Machining and Machine Tools written by Steven Liang and published by Springer. This book was released on 2015-12-29 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with the fundamental, analytical, and quantitative knowledge of machining process planning and optimization based on advanced and practical understanding of machinery, mechanics, accuracy, dynamics, monitoring techniques, and control strategies that they need to understanding machining and machine tools. It is written for first-year graduate students in mechanical engineering, and is also appropriate for use as a reference book by practicing engineers. It covers topics such as single and multiple point cutting processes; grinding processes; machine tool components, accuracy, and metrology; shear stress in cutting, cutting temperature and thermal analysis, and machine tool chatter. The second section of the book is devoted to “Non-Traditional Machining,” where readers can find chapters on electrical discharge machining, electrochemical machining, laser and electron beam machining, and biomedical machining. Examples of realistic problems that engineers are likely to face in the field are included, along with solutions and explanations that foster a didactic learning experience.
Download or read book Machining Dynamics written by Tony L. Schmitz and published by Springer. This book was released on 2018-10-30 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book trains engineers and students in the practical application of machining dynamics, with a particular focus on milling. The book walks readers through the steps required to improve machining productivity through chatter avoidance and reduced surface location error, and covers in detail topics such as modal analysis (including experimental methods) to obtain the tool point frequency response function, descriptions of turning and milling, force modeling, time domain simulation, stability lobe diagram algorithms, surface location error calculation for milling, beam theory, and more. This new edition includes updates throughout the entire text, new exercises and examples, and a new chapter on machining tribology. It is a valuable resource for practicing manufacturing engineers and graduate students interested in learning how to improve machining productivity through consideration of the process dynamics.
Download or read book Hybrid Machining written by Xichun Luo and published by Academic Press. This book was released on 2018-06-27 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid Machining: Theory, Methods, and Case Studies covers the scientific fundamentals, techniques, applications and real-world descriptions of emerging hybrid machining technology. This field is advancing rapidly in industrial and academic contexts, creating a great need for the fundamental and technical guidance that this book provides. The book includes discussions of basic concepts, process design principles, standard hybrid machining processes, multi-scale modeling approaches, design, on-machine metrology and work handling systems. Readers interested in manufacturing systems, product design or machining technology will find this one-stop guide to hybrid machining the ideal reference. - Includes tables of recommended processing parameters for key engineering materials/products for each hybrid machining process - Provides case studies covering real industrial applications - Explains how to use multiscale modeling for hybrid machining
Download or read book Advanced Machining and Manufacturing Processes written by Kaushik Kumar and published by Springer. This book was released on 2018-12-25 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the various advanced manufacturing processes employed by manufacturing industries to improve their productivity in terms of socio-economic development. The authors present automated conventional and non-conventional machining techniques as well as virtual machining principles and techniques. Material removal by mechanical, chemical, thermal and electrochemical processes are described in detail. A glossary of key concepts is attached at end of the book.
Download or read book Applied Machining Technology written by Heinz Tschätsch and published by Springer Science & Business Media. This book was released on 2010-03-11 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machining and cutting technologies are still crucial for many manufacturing processes. This reference presents all important machining processes in a comprehensive and coherent way. It provides the practising engineer with many technical information of the manufacturing processes and collects essential aspects such as maximum obtainable precision, errors or reference values. Many examples of concrete calculations, problems and their solutions illustrate the material and support the learning reader. The internet addresses given in the appendix provide with a fast link to more information sources.
Download or read book Tribology and Fundamentals of Abrasive Machining Processes written by Bahman Azarhoushang and published by Elsevier. This book was released on 2021-11-16 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition draws upon the fundamentals of abrasive machining processes and the science of tribology to understand, predict, and improve abrasive machining processes. Each of the main elements of the abrasive machining system is looked at alongside the tribological factors that control the efficiency and quality of the processes described. The new edition has been updated to include a variety of industrial applications. Grinding and conditioning of grinding tools are dealt with in particular detail, and solutions are proposed for many of the most commonly experienced industrial problems, such as poor accuracy, poor surface quality, rapid tool wear, vibrations, workpiece burn, and high process costs. The entire book has been rewritten and restructured, with ten completely new chapters. Other new features include: Extensive explanations of the main abrasive machining processes such as grinding (including reciprocating and creep-feed grinding, high-speed high-efficiency deep grinding, external and internal cylindrical grinding, and centerless grinding), honing, superfinishing, lapping, polishing, and finishing Discussions of the new classes of abrasives, abrasive tools, and bonding materials New case studies and troubleshooting on the most common grinding practices New coverage on grinding tool conditioning, mechanical dressing, and nonmechanical dressing processes Detailed explanations of the effects of process input parameters (such as cutting parameters, workpiece material and geometry, and abrasive tools) on process characteristics, workpiece quality, tool wear, and process parameters (such as cutting forces and temperature as well as achievable material removal rate) Updated topics regarding process fluids for abrasive machining and fluid delivery
Download or read book Machining Processes and Machines written by Zainul Huda and published by CRC Press. This book was released on 2020-12-14 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machining is one of the eight basic manufacturing processes. This textbook covers the fundamentals and engineering analysis of both conventional and advanced/non-traditional material removal processes along with gear cutting/manufacturing and computer numerically controlled (CNC) machining. The text provides a holistic understanding of machining processes and machines in manufacturing; it enables critical thinking through mathematical modeling and problem solving, and offers 200 worked examples/calculations and 70 multiple choice questions on machining operations, as well as on CNC machining, with the eBook version offered in color. This unique book is equally useful to both engineering degree students and production engineers practicing in the manufacturing industry.
Download or read book Metal Cutting Theory and Practice written by David A. Stephenson and published by CRC Press. This book was released on 2018-09-03 with total page 1381 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Complete Reference Covering the Latest Technology in Metal Cutting Tools, Processes, and Equipment Metal Cutting Theory and Practice, Third Edition shapes the future of material removal in new and lasting ways. Centered on metallic work materials and traditional chip-forming cutting methods, the book provides a physical understanding of conventional and high-speed machining processes applied to metallic work pieces, and serves as a basis for effective process design and troubleshooting. This latest edition of a well-known reference highlights recent developments, covers the latest research results, and reflects current areas of emphasis in industrial practice. Based on the authors’ extensive automotive production experience, it covers several structural changes, and includes an extensive review of computer aided engineering (CAE) methods for process analysis and design. Providing updated material throughout, it offers insight and understanding to engineers looking to design, operate, troubleshoot, and improve high quality, cost effective metal cutting operations. The book contains extensive up-to-date references to both scientific and trade literature, and provides a description of error mapping and compensation strategies for CNC machines based on recently issued international standards, and includes chapters on cutting fluids and gear machining. The authors also offer updated information on tooling grades and practices for machining compacted graphite iron, nickel alloys, and other hard-to-machine materials, as well as a full description of minimum quantity lubrication systems, tooling, and processing practices. In addition, updated topics include machine tool types and structures, cutting tool materials and coatings, cutting mechanics and temperatures, process simulation and analysis, and tool wear from both chemical and mechanical viewpoints. Comprised of 17 chapters, this detailed study: Describes the common machining operations used to produce specific shapes or surface characteristics Contains conventional and advanced cutting tool technologies Explains the properties and characteristics of tools which influence tool design or selection Clarifies the physical mechanisms which lead to tool failure and identifies general strategies for reducing failure rates and increasing tool life Includes common machinability criteria, tests, and indices Breaks down the economics of machining operations Offers an overview of the engineering aspects of MQL machining Summarizes gear machining and finishing methods for common gear types, and more Metal Cutting Theory and Practice, Third Edition emphasizes the physical understanding and analysis for robust process design, troubleshooting, and improvement, and aids manufacturing engineering professionals, and engineering students in manufacturing engineering and machining processes programs.
