Download or read book Introduction to Impact Engineering written by M. Macaulay and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: We are all familiar with impact. Lesser impacts such as hammering a nail, cracking an egg or stubbing a toe are part of everyday life. More violent impacts such as those caused by car crashes or bullets are fortunately less common but are still well enough known to be taken for granted. Very violent impacts such as meteorites striking the earth are outside our personal experience but we are aware of them. Despite this, impacts remain mysterious. They occur too quickly for us to follow what is happening and the evidence they leave behind is often ambiguous. Over the last thirty years improvements in high speed instrumen tation and developments in computing have made them more comprehensible and an increasing amount of attention is being paid to the subject which is an area of expanding scientific and engineering research. A multi-disciplinary approach is not yet established and information is scattered in many places and expressed in a variety of jargons. In applied mathematics, impacts have provided interesting theoretical problems with elegant solutions but it has been difficult to check results experimentally. Impacts can change the behaviour of materials but similar changes can sometimes be produced in other ways and the underlying mechanisms are not clear. Empirical solutions to engineering problems have worked reasonably well but it is hard to know what to do if things go wrong.

Download or read book Impact Engineering written by Marcílio Alves and published by CRC Press. This book was released on 2024-11-01 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of Impact Engineering covers the dynamic analysis of structures undergoing small to large displacements, linear and nonlinear elastic material behavior to viscoplasticity, and the range of features of structural impact analysis. Individuals, as well as various governing bodies are concerned about protection against natural hazards, crash-type accidents, and terrorism- commonly referred to as "impact"- implying a rapid loading process. The book discusses the physics involved in such impact situations and incorporates analytical considerations as well as techniques to obtain and interpret experimental data and relevant numerical techniques. It also includes a chapter on scaling which is a relevant aspect when studying impact on large structures. This book will be useful for advanced students and professionals in civil and mechanical engineering as well as for students and researchers in applied physics and other relevant disciplines.

Download or read book Impact Engineering of Composite Structures written by Serge Abrate and published by Springer Science & Business Media. This book was released on 2011-02-24 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides an introduction to the mechanics of composite materials, written for graduate students and practitioners in industry. It examines ways to model the impact event, to determine the size and severity of the damage and discusses general trends observed during experiments.

Download or read book Introduction to Engineering written by Quamrul H. Mazumder and published by CRC Press. This book was released on 2018-09-03 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed for the Ultimate Introductory Engineering Course Introduction to Engineering: An Assessment and Problem-Solving Approach incorporates experiential, and problem- and activity-based instruction to engage students and empower them in their own learning. This book compiles the requirements of ABET, (the organization that accredits most US engineering, computer science, and technology programs and equivalency evaluations to international engineering programs) and integrates the educational practices of the Association of American Colleges and Universities (AAC&U). The book provides learning objectives aligned with ABET learning outcomes and AAC&U high-impact educational practices. It also identifies methods for overcoming institutional barriers and challenges to implementing assessment initiatives. The book begins with an overview of the assessment theory, presents examples of real-world applications, and includes key assessment resources throughout. In addition, the book covers six basic themes: Use of assessment to improve student learning and educational programs at both undergraduate and graduate levels Understanding and applying ABET criteria to accomplish differing program and institutional missions Illustration of evaluation/assessment activities that can assist faculty in improving undergraduate and graduate courses and programs Description of tools and methods that have been demonstrated to improve the quality of degree programs and maintain accreditation Using high-impact educational practices to maximize student learning Identification of methods for overcoming institutional barriers and challenges to implementing assessment initiative A practical guide to the field of engineering and engineering technology, Introduction to Engineering: An Assessment and Problem-Solving Approach serves as an aid to both instructor and student in developing competencies and skills required by ABET and AAC&U.

Download or read book Introduction to Impact Dynamics written by T. X. Yu and published by John Wiley & Sons. This book was released on 2018-01-23 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental guidance—including concepts, models, and methodology—for better understanding the dynamic behavior of materials and for designing for objects and structures under impact or intensive dynamic loading This book introduces readers to the dynamic response of structures with important emphasis on the material behavior under dynamic loadings. It utilizes theoretical modelling and analytical methods in order to provide readers with insight into the various phenomena. The content of the book is an introduction to the fundamental aspects, which underpin many important industrial areas. These areas include the safety of various transportation systems and a range of different structures when subjected to various impact and dynamic loadings, including terrorist attacks. Presented in three parts—Stress Waves in Solids, Dynamic Behaviors of Materials Under High Strain Rate, and Dynamic Response of Structures to Impact and Pulse Loading—Introduction to Impact Dynamics covers elastic waves, rate dependent behaviors of materials, effects of tensile force, inertial effects, and more. The book also features numerous case studies to aid in facilitating learning. The strength of the book is its clarity, balanced coverage, and practical examples, which allow students to learn the overall knowledge of impact dynamics in a limited time whilst directing them to explore more advanced technical knowledge and skills. Considers both the dynamic behavior of materials and stress waves, and the dynamic structural response and energy absorption, emphasizing the interaction between material behavior and the structural response Provides a comprehensive description of the phenomenon of impact of structures, containing both fundamental issues of wave propagation and constitutive relation of materials, and the dynamic response of structures under impact loads Based on the authors’ research and teaching experience as well as updated developments in the field Introduction to Impact Dynamics is the perfect textbook for graduate and postgraduate students, and will work as a reference for engineers in the fields of solid mechanics, automotive design, aerospace, mechanical, nuclear, marine, and defense.

Download or read book Exploring Engineering written by Philip Kosky and published by Academic Press. This book was released on 2009-11-11 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Winner in its first edition of the Best New Undergraduate Textbook by the Professional and Scholarly Publishing Division of the American Association of Publishers (AAP), Kosky, et al is the first text offering an introduction to the major engineering fields, and the engineering design process, with an interdisciplinary case study approach. It introduces the fundamental physical, chemical and material bases for all engineering work and presents the engineering design process using examples and hands-on projects. Organized in two parts to cover both the concepts and practice of engineering: Part I, Minds On, introduces the fundamental physical, chemical and material bases for all engineering work while Part II, Hands On, provides opportunity to do design projects An Engineering Ethics Decision Matrix is introduced in Chapter 1 and used throughout the book to pose ethical challenges and explore ethical decision-making in an engineering context Lists of "Top Engineering Achievements" and "Top Engineering Challenges" help put the material in context and show engineering as a vibrant discipline involved in solving societal problems New to this edition: Additional discussions on what engineers do, and the distinctions between engineers, technicians, and managers (Chapter 1) New coverage of Renewable Energy and Environmental Engineering helps emphasize the emerging interest in Sustainable Engineering New discussions of Six Sigma in the Design section, and expanded material on writing technical reports Re-organized and updated chapters in Part I to more closely align with specific engineering disciplines new end of chapter excercises throughout the book

Download or read book Introduction to Service Engineering written by Waldemar Karwowski and published by John Wiley & Sons. This book was released on 2010-01-12 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: What you need to know to engineer the global service economy. As customers and service providers create new value through globally interconnected service enterprises, service engineers are finding new opportunities to innovate, design, and manage the service operations and processes of the new service-based economy. Introduction to Service Engineering provides the tools and information a service engineer needs to fulfill this critical new role. The book introduces engineers as well as students to the fundamentals of the theory and practice of service engineering, covering the characteristics of service enterprises, service design and operations, customer service and service quality, web-based services, and innovations in service systems. Readers explore such key aspects of service engineering as: The role of service science in developing a smarter planet Service enterprises, including: enterprise value creation, architecture of service organizations, service enterprise modeling, and the application of methods of systems engineering to services Service design, including collaborative e-service systems and the new service development process Service operations and management, including service call centers Service quality, from design operations to customer relations Web-based services and technology in the global e-organization Innovation in service systems from service engineering to integrative solutions, service-oriented architecture solutions, and technology transfer streams With chapters written by fifty-seven specialists and edited by bestselling authors Gavriel Salvendy and Waldemar Karwowski, Introduction to Service Engineering uses numerous examples, problems, and real-world case studies to help readers master the knowledge and the skills required to succeed in service engineering.

Download or read book Energy Absorption of Structures and Materials written by G Lu and published by Elsevier. This book was released on 2003-10-31 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important study focuses on the way in which structures and materials can be best designed to absorb kinetic energy in a controllable and predictable manner. Understanding of energy absorption of structures and materials is important in calculating the damage to structures caused by accidental collision, assessing the residual strength of structures after initial damage and in designing packaging to protect its contents in the event of impact. Whilst a great deal of recent research has taken place into the energy absorption behaviour of structures and materials and significant progress has been made, this knowledge is diffuse and widely scattered. This book offers a synthesis of the most recent developments and forms a detailed and comprehensive view of the area. It is an essential reference for all engineers concerned with materials engineering in relation to the theory of plasticity, structural mechanics and impact dynamics. - Important new study of energy absorption of engineering structures and materials - Shows how they can be designed to withstand sudden loading in a safe, controllable and predictable way - Illuminating case studies back up the theoretical analysis

Download or read book Introduction to Biomedical Engineering written by John Enderle and published by Elsevier. This book was released on 2005-05-20 with total page 1141 pages. Available in PDF, EPUB and Kindle. Book excerpt: Under the direction of John Enderle, Susan Blanchard and Joe Bronzino, leaders in the field have contributed chapters on the most relevant subjects for biomedical engineering students. These chapters coincide with courses offered in all biomedical engineering programs so that it can be used at different levels for a variety of courses of this evolving field. Introduction to Biomedical Engineering, Second Edition provides a historical perspective of the major developments in the biomedical field. Also contained within are the fundamental principles underlying biomedical engineering design, analysis, and modeling procedures. The numerous examples, drill problems and exercises are used to reinforce concepts and develop problem-solving skills making this book an invaluable tool for all biomedical students and engineers. New to this edition: Computational Biology, Medical Imaging, Genomics and Bioinformatics.* 60% update from first edition to reflect the developing field of biomedical engineering* New chapters on Computational Biology, Medical Imaging, Genomics, and Bioinformatics* Companion site: http://intro-bme-book.bme.uconn.edu/* MATLAB and SIMULINK software used throughout to model and simulate dynamic systems* Numerous self-study homework problems and thorough cross-referencing for easy use

Download or read book Introduction to Clinical Engineering written by Samantha Jacques and published by Academic Press. This book was released on 2020-08-06 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Clinical Engineering focuses on the application of engineering practice within the healthcare delivery system, often defined as clinical engineering. Readers will explore the fundamental concepts integral to the support of healthcare technology to advance medical care. The primary mission of clinical engineers is the utilization of medical devices, software, and systems to deliver safe and effective patient care throughout technology's lifecycle. This unique and interdisciplinary workforce is part of the healthcare team and serves as the intersection between engineering and medicine. This book is aimed at practitioners, managers, students, and educators to serve as a resource that offers a broad perspective of the applications of engineering principles, regulatory compliance, lifecycle planning, systems thinking, risk analysis, and resource management in healthcare. This book is an invaluable tool for healthcare technology management (HTM) professionals and can serve as a guide for students to explore the profession in depth. - Offers readers an in-depth look into the support and implementation of existing medical technology used for patient care in a clinical setting - Provides insights into the clinical engineering profession, focusing on engineering principles as applied to the US healthcare system - Explores healthcare technology, hospital and systems safety, information technology and interoperability with medical devices, clinical facilities management, as well as human resource management

Download or read book Introduction to Development Engineering written by Temina Madon and published by Springer Nature. This book was released on 2022-09-08 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access textbook introduces the emerging field of Development Engineering and its constituent theories, methods, and applications. It is both a teaching text for students and a resource for researchers and practitioners engaged in the design and scaling of technologies for low-resource communities. The scope is broad, ranging from the development of mobile applications for low-literacy users to hardware and software solutions for providing electricity and water in remote settings. It is also highly interdisciplinary, drawing on methods and theory from the social sciences as well as engineering and the natural sciences. The opening section reviews the history of “technology-for-development” research, and presents a framework that formalizes this body of work and begins its transformation into an academic discipline. It identifies common challenges in development and explains the book’s iterative approach of “innovation, implementation, evaluation, adaptation.” Each of the next six thematic sections focuses on a different sector: energy and environment; market performance; education and labor; water, sanitation and health; digital governance; and connectivity. These thematic sections contain case studies from landmark research that directly integrates engineering innovation with technically rigorous methods from the social sciences. Each case study describes the design, evaluation, and/or scaling of a technology in the field and follows a single form, with common elements and discussion questions, to create continuity and pedagogical consistency. Together, they highlight successful solutions to development challenges, while also analyzing the rarely discussed failures. The book concludes by reiterating the core principles of development engineering illustrated in the case studies, highlighting common challenges that engineers and scientists will face in designing technology interventions that sustainably accelerate economic development. Development Engineering provides, for the first time, a coherent intellectual framework for attacking the challenges of poverty and global climate change through the design of better technologies. It offers the rigorous discipline needed to channel the energy of a new generation of scientists and engineers toward advancing social justice and improved living conditions in low-resource communities around the world.

Download or read book Introduction to Industrial Engineering written by Avraham Shtub and published by CRC Press. This book was released on 2015-12-22 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Firsthand Look at the Role of the Industrial Engineer The industrial engineer helps decide how best to utilize an organization’s resources to achieve company goals and objectives. Introduction to Industrial Engineering, Second Edition offers an in-depth analysis of the industrial engineering profession. While also providing a historical perspective chronicling the development of the profession, this book describes the standard duties performed, the tools and terminologies used, and the required methods and processes needed to complete the tasks at hand. It also defines the industrial engineer’s main areas of operation, introduces the topic of information systems, and discusses their importance in the work of the industrial engineer. The authors explain the information system concept, and the need for integrated processes, supported by modern information systems. They also discuss classical organizational structures (functional organization, project organization, and matrix organization), along with the advantages and disadvantages of their use. The book includes the technological aspects (data collection technologies, databases, and decision-support areas of information systems), the logical aspects (forecasting models and their use), and aspects of principles taken from psychology, sociology, and ergonomics that are commonly used in the industry. What’s New in this Edition: The second edition introduces fields that are now becoming a part of the industrial engineering profession, alongside conventional areas (operations management, project management, quality management, work measurement, and operations research). In addition, the book: Provides an understanding of current pathways for professional development Helps students decide which area to specialize in during the advanced stages of their studies Exposes students to ergonomics used in the context of workspace design Presents key factors in human resource management Describes frequently used methods of teaching in the field Covers basic issues relative to ergonomics and human–machine interface Introduces the five basic processes that exist in many organizations Introduction to Industrial Engineering, Second Edition establishes industrial engineering as the organization of people and resources, describes the development and nature of the profession, and is easily accessible to anyone needing to learn the basics of industrial engineering. The book is an indispensable resource for students and industry professionals.

Download or read book An Introduction to Genetic Engineering written by Desmond S. T. Nicholl and published by Cambridge University Press. This book was released on 2002-02-07 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author presents a basic introduction to the world of genetic engineering. Copyright © Libri GmbH. All rights reserved.

Download or read book Engineering Fundamentals An Introduction to Engineering SI Edition written by Saeed Moaveni and published by Cengage Learning. This book was released on 2011-01-01 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: Specifically designed as an introduction to the exciting world of engineering, ENGINEERING FUNDAMENTALS: AN INTRODUCTION TO ENGINEERING encourages students to become engineers and prepares them with a solid foundation in the fundamental principles and physical laws. The book begins with a discovery of what engineers do as well as an inside look into the various areas of specialization. An explanation on good study habits and what it takes to succeed is included as well as an introduction to design and problem solving, communication, and ethics. Once this foundation is established, the book moves on to the basic physical concepts and laws that students will encounter regularly. The framework of this text teaches students that engineers apply physical and chemical laws and principles as well as mathematics to design, test, and supervise the production of millions of parts, products, and services that people use every day. By gaining problem solving skills and an understanding of fundamental principles, students are on their way to becoming analytical, detail-oriented, and creative engineers. Important Notice: Media content referenced within the product description or the product text may not be available in the ebook version.

Download or read book Introduction to Logistics Engineering written by G. Don Taylor and published by CRC Press. This book was released on 2008-12-03 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite its importance, logistics engineering often lags industry requirements, especially in terms of engineering-based needs. Filling the gap between education and practice, this brief but comprehensive volume covers the most basic material in the field of logistics engineering, making is suitable for those who require an overview of the topic. T

Download or read book Introduction to Product Design and Development for Engineers written by Dr. Ali Jamnia and published by CRC Press. This book was released on 2018-06-12 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Product Design and Development for Engineers provides guidelines and best practices for the design, development, and evaluation of engineered products. Created to serve fourth year undergraduate students in Engineering Design modules with a required project, the text covers the entire product design process and product life-cycle, from the initial concept to the design and development stages, and through to product testing, design documentation, manufacturability, marketing, and sustainability. Reflecting the author's long career as a design engineer, this text will also serve as a practical guide for students working on their capstone design projects.

Download or read book Systems Engineering Practice written by R. Ian Faulconbridge and published by . This book was released on 2014-01-01 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: