Download or read book Introduction to Adsorption written by Chi Tien and published by Elsevier. This book was released on 2018-11-27 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Adsorption: Basics, Analysis, and Applications presents adsorption basics that are relevant and essential to its application, including data analysis, interpretation and design calculations. The book deliberately keeps background information to a minimum, instead comprehensively covering adsorption of liquid solutions, the difference between equilibrium individual solute uptake and surface excess, a general discussion of adsorbate uptake mechanisms and uptake rate expression, uptake steps, performance models and their generalizations, application of performance models, and design methods based on the constant behavior assumption and unused bed length concept. - Includes adsorption basics and their applications - Discusses gas adsorption equilibrium and equilibrium of liquid adsorption - Gives the various steps of adsorbate uptake and their combination to yield adsorbate uptake rate expression - Presents both rational and empirical design for adsorption processes - Highlights common mistakes found in recent adsorption publications

Download or read book Adsorption by Powders and Porous Solids written by Jean Rouquerol and published by Academic Press. This book was released on 2013-09-06 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The declared objective of this book is to provide an introductory review of the various theoretical and practical aspects of adsorption by powders and porous solids with particular reference to materials of technological importance. The primary aim is to meet the needs of students and non-specialists who are new to surface science or who wish to use the advanced techniques now available for the determination of surface area, pore size and surface characterization. In addition, a critical account is given of recent work on the adsorptive properties of activated carbons, oxides, clays and zeolites. - Provides a comprehensive treatment of adsorption at both the gas/solid interface and the liquid/solid interface - Includes chapters dealing with experimental methodology and the interpretation of adsorption data obtained with porous oxides, carbons and zeolites - Techniques capture the importance of heterogeneous catalysis, chemical engineering and the production of pigments, cements, agrochemicals, and pharmaceuticals

Download or read book Principles of Adsorption and Reaction on Solid Surfaces written by Richard I. Masel and published by John Wiley & Sons. This book was released on 1996-03-22 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of Adsorption and Reaction on Solid Surfaces As with other books in the field, Principles of Adsorption and Reaction on Solid Surfaces describes what occurs when gases come in contact with various solid surfaces. But, unlike all the others, it also explains why. While the theory of surface reactions is still under active development, the approach Dr. Richard Masel takes in this book is to outline general principles derived from thermodynamics and reaction rate theory that can be applied to reactions on surfaces, and to indicate ways in which these principles may be applied. The book also provides a comprehensive treatment of the latest quantitative surface modeling techniques with numerous examples of their use in the fields of chemical engineering, physical chemistry, and materials science. A valuable working resource and an excellent graduate-level text, Principles of Adsorption and Reaction on Solid Surfaces provides readers with: * A detailed look at the latest advances in understanding and quantifying reactions on surfaces * In-depth reviews of all crucial background material * 40 solved examples illustrating how the methods apply to catalysis, physical vapor deposition, chemical vapor deposition, electrochemistry, and more * 340 problems and practice exercises * Sample computer programs * Universal plots of many key quantities * Detailed, class-tested derivations to help clarify key results The recent development of quantitative techniques for modeling surface reactions has led to a number of exciting breakthroughs in our understanding of what happens when gases come in contact with solid surfaces. While many books have appeared describing various experimental modeling techniques and the results obtained through their application, until now, there has been no single-volume reference devoted to the fundamental principles governing the processes observed. The first book to focus on governing principles rather than experimental techniques or specific results, Principles of Adsorption and Reaction on Solid Surfaces provides students and professionals with a quantitative treatment of the application of principles derived from the fields of thermodynamics and reaction rate theory to the investigation of gas adsorption and reaction on solid surfaces. Writing for a broad-based audience including, among others, chemical engineers, chemists, and materials scientists, Dr. Richard I. Masel deftly balances basic background in areas such as statistical mechanics and kinetics with more advanced applications in specialized areas. Principles of Adsorption and Reaction on Solid Surfaces was also designed to provide readers an opportunity to quickly familiarize themselves with all of the important quantitative surface modeling techniques now in use. To that end, the author has included all of the key equations involved as well as numerous real-world illustrations and solved examples that help to illustrate how the equations can be applied. He has also provided computer programs along with universal plots that make it easy for readers to apply results to their own problems with little computational effort. Principles of Adsorption and Reaction on Solid Surfaces is a valuable working resource for chemical engineers, physical chemists, and materials scientists, and an excellent text for graduate students in those disciplines.

Download or read book Adsorption by Carbons written by Eduardo J. Bottani and published by Elsevier. This book was released on 2011-10-10 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adsorption by Carbons covers the most significant aspects of adsorption by carbons, attempting to fill the existing gap between the fields of adsorption and carbonaceous materials. Both basic and applied aspects are presented. The first section of the book introduces physical adsorption and carbonaceous materials, and is followed by a section concerning the fundamentals of adsorption by carbons. This leads to development of a series of theoretical concepts that serve as an introduction to the following section in which adsorption is mainly envisaged as a tool to characterize the porous texture and surface chemistry of carbons. Particular attention is paid to some novel nanocarbons, and the electrochemistry of adsorption by carbons is also addressed. Finally, several important technological applications of gas and liquid adsorption by carbons in areas such as environmental protection and energy storage constitute the last section of the book. - The first book to address the interplay between carbonaceous materials and adsorption - Includes important environmental applications, such as the removal of volatile organic compounds from polluted atmospheres - Covers both gas-solid and liquid-solid adsorption

Download or read book The Little Adsorption Book written by Diran Basmadjian and published by CRC Press. This book was released on 2018-02-06 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique approach to the basic concepts of adsorption is written for students, engineers, scientists, and others who need a clear presentation of adsorption processes. Unlike other texts on this subject, which are written for the specialist and rely heavily on advanced mathematics, this unique book helps you solve everyday problems in applications of adsorption, without complex mathematics or computers. The author, a recognized expert in the field, gives you a quick introduction to the underlying physics of absorption and explains how to apply adsorption to solve analytical and design problems. Rich with practical examples and enhanced by illustrations that support the text, this refreshingly straightforward presentation helps you cut through the complexities of adsorption to find fast answers to pressing real-world questions.

Download or read book Adsorption from Solutions of Non Electrolytes written by J. J. Kipling and published by Academic Press. This book was released on 2013-10-22 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adsorption from Solutions of Non-Electrolytes provides a general discussion of the subject, which has so far been given little or no attention in current textbooks of physical chemistry. A general view of the subject is particularly needed at a time when we wish to see how far it will be possible to use theories of solutions to explain the phenomena of adsorption. The book opens with an introductory chapter on the types of interface, aspects of adsorption from solution, types of adsorption, and classification of systems. This is followed by separate chapters on experimental methods, adsorption at the liquid-solid interface, adsorption from completely miscible and partially liquids, adsorption of gases and solids from solution, adsorption of polymers, and adsorption in multicomponent systems. Subsequent chapters deal with factors influencing competitive adsorption at the liquid-solid interface. adsorption at the liquid-vapor and liquid-liquid interface, kinetics and thermodynamics of adsorption from the liquid phase, the use of columns in adsorption, and use of adsorption from solution to measure surface area.

Download or read book Dynamics of Adsorption at Liquid Interfaces written by S.S. Dukhin and published by Elsevier. This book was released on 1995-04-11 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the first of its kind, this book provides a valuable introduction for scientists and engineers interested in liquid/fluid interfaces and disperse systems to the rapidly developing area of adsorption dynamics. It is the first extensive review available on the subject of dynamics of adsorption and gives a general summary of the current state of adsorption kinetics theory and experiments. Current progress in recently designed set-ups and improved and generalised known methods for studying interfacial relaxations is reviewed. In addition, the role of the electric charge of surfactants in the adsorption process is discussed in terms of a non-equilibrium distribution of adsorbing ions in the diffuse layer.Present theories of the effect of dynamic adsorption layers on mobile surfaces, such as moving drops and bubbles, based on both diffusion and kinetic controlled adsorption models are described and efficient approximate analytical methods to solve the mathematical problem of coupling surfactant transport and hydrodynamics are introduced. The role of a dynamic adsorption layer in bubble rising, film drainage and film stabilisation and in complex processes such as flotation and microflotation is discussed.Containing more than 1100 references, the book is essential reading for industrial scientists and graduate and post-graduate students in physical, surface and colloid chemistry, physico-chemical hydrodynamics, water purification and mineral processing.

Download or read book Adsorption Analysis Equilibria And Kinetics With Cd Containing Computer Matlab Programs written by Duong D Do and published by World Scientific. This book was released on 1998-09-22 with total page 915 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers topics of equilibria and kinetics of adsorption in porous media. Fundamental equilibria and kinetics are dealt with for homogeneous as well as heterogeneous particles. Five chapters of the book deal with equilibria and eight chapters deal with kinetics. Single component as well as multicomponent systems are discussed. In kinetics analysis, we deal with the various mass transport processes and their interactions inside a porous particle. Conventional approaches as well as the new approach using Maxwell-Stefan equations are presented. Various methods to measure diffusivity, such as the Differential Adsorption Bed (DAB), the time lag, the diffusion cell, chromatography, and the batch adsorber methods are also covered by the book. It can be used by lecturers and engineers who wish to carry out research in adsorption. A number of programming codes written in MatLab language are included so that readers can use them directly to better understand the behavior of single and multicomponent adsorption systems.

Download or read book Adsorption Fundamental Processes and Applications written by Mehrorang Ghaedi and published by Academic Press. This book was released on 2021-03-19 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adsorption: Fundamental Processes and Applications, Volume 33 in the Interface Science and Technology Series, discusses the great technological importance of adsorption and describes how adsorbents are used on a large scale as desiccants, catalysts, catalyst supports, in the separation of gases, the purification of liquids, pollution control, and in respiratory protection. Finally, it explores how adsorption phenomena play a vital role in many solid-state reactions and biological mechanisms, as well as stressing the importance of the widespread use of adsorption techniques in the characterization of surface properties and the texture of fine powders. - Covers the fundamental aspects of adsorption process engineering - Reviews the environmental impact of key aquatic pollutants - Discusses and analyzes the importance of adsorption processes for water treatment - Highlights opportunity areas for adsorption process intensification - Edited by a world-leading researcher in interface science

Download or read book Adsorption Technology and Design written by W John Thomas, FEng and published by Butterworth-Heinemann. This book was released on 1998-04-27 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to provide all those involved in designing and running adsorption processes with a guide to adsorption technology and design.

Download or read book Gas Adsorption Equilibria written by Jürgen U. Keller and published by Springer Science & Business Media. This book was released on 2006-06-23 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to present for the first time experimental methods to measure equilibria states of pure and mixed gases being adsorbed on the surface of solid materials. It has been written for engineers and scientists from industry and academia who are interested in adsorption based gas separation processes and/or in using gas adsorption for characterization of the porosity of solid materials. This book is the result of a fruitful collaboration of a theoretician (JUK) and an experimentalist (RS) over more than twelve years in the field of gas adsorption systems at the Institute of Fluid- and Thermodynamics (IFT) at the University of Siegen, Siegen, Germany. This collaboration resulted in the development of several new methods to measure not only pure gas adsorption, but gas mixture or coadsorption equilibria on inert porous solids. Also several new theoretical results could be achieved leading to new types of so-called adsorption isotherms based on the concepts of molecular association and – phenomenologically speaking – on that of thermodynamic phases of fractal dimension. Naturally, results of international collaboration of the authors over the years (1980-2000) also are included.

Download or read book Design Simulation and Optimization of Adsorptive and Chromatographic Separations A Hands On Approach written by Kevin R. Wood and published by John Wiley & Sons. This book was released on 2018-07-16 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive resource to the construction, use, and modification of the wide variety of adsorptive and chromatographic separations Design, Simulation and Optimization of Adsorptive and Chromatographic Separations offers the information needed to effectively design, simulate, and optimize adsorptive and chromatographic separations for a wide range of industrial applications. The authors?noted experts in the field?cover the fundamental principles, the applications, and a range of modeling techniques for the processes. The text presents a unified approach that includes the ideal and intermediate equations and offers a wealth of hands-on case studies that employ the rigorous simulation packages Aspen Adsorption and Aspen Chromatography. The text reviews the effective design strategies, details design considerations, and the assumptions which the modelers are allowed to make. The authors also cover shortcut design methods as well as mathematical tools that help to determine optimal operating conditions. This important text: -Covers everything from the underlying pheonmena to model optimization and the customization of model code -Includes practical tutorials that allow for independent review and study -Offers a comprehensive review of the construction, use, and modification of the wide variety of adsorptive and chromatographic separations -Contains contributions from three noted experts in the field Written for chromatographers, process engineers, ehemists, and other professionals, Design, Simulation and Optimization of Adsorptive and Chromatographic Separations offers a comprehensive review of the construction, use, and modification of adsorptive and chromatographic separations.

Download or read book Principles of Adsorption and Adsorption Processes written by Douglas M. Ruthven and published by John Wiley & Sons. This book was released on 1984-06-05 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first up-to-date summary and review for the fundamental principles and industrial practice of adsorption separation processes in more than 30 years. Emphasizes the understanding of adsorption column dynamics and the modeling of adsorption systems, as well as fundamental aspects of kinetics and equilibria.

Download or read book Kinetics of Metal Ion Adsorption from Aqueous Solutions written by Sotira Yiacoumi and published by Springer Science & Business Media. This book was released on 1995-06-30 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph is intended to provide a systematic presentation of theories concerning the adsorption of metal ions from aqueous solutions onto surfaces of natural and synthetic substances and to outline methods and procedures to estimate the extent and progress ofadsorption. As heavy metals and the problems associated with their transport and distribution are of serious concern to human health and the environment, the materials presented in this volume have both theoretical and practical significance. In writing this monograph, one ofour goals was to prepare a book useful to environmental workers and practicing engineers. For this reason, our presentation relies heavily on concepts commonly used in the environmental engineering literature. In fact, the volume was prepared for readers with a basic understanding of environmental engineering principles and some knowledge of adsorption processes. No prior familiarity with the ionic solute adsorption at solid-solution interfaces is assumed. Instead, introduction of the necessary background information was included. Generally speaking, metal ion adsorption may be studied in terms of three distinct but interrelated phenomena: surface ionization, complex formation, and the formation and presence of an electrostatic double layer adjacent to adsorbent surfaces. Analyses of these phenomena with various degrees of sophistication are xviii ADSORPTION OF METAL IONS FROM AQUEOUS SOLUTIONS presented, and their various combinations yield different models that describe metal ion adsorption.

Download or read book Adsorption Technology in Water Treatment written by Eckhard Worch and published by Walter de Gruyter. This book was released on 2012-08-31 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adsorption processes have played a central role in water treatment for many years but their importance is on the rise with the continuous discoveries of new micropollutants in the water cycle (pharmaceuticals for example). In addition to the classical application in drinking water treatment, other application fields are attracting increasing interest, such as wastewater treatment, groundwater remediation, treatment of landfill leachate, and so on. Based on the author's long-term experience in adsorption research, the scientific monograph treats the theoretical fundamentals of adsorption technology for water treatment from a practical perspective. It presents all the basics needed for experimental adsorption studies as well as for process modelling and adsorber design. Topics discussed in the monograph include: introduction into basic concepts and practical applications of adsorption processes; adsorbents and their characterisation, single and multi-solute adsorption equilibria, adsorption kinetics, adsorption dynamics in fixed-bed adsorbers and fixed-bed adsorber design, regeneration and reactivation of adsorbents, introduction into geosorption processes in bank filtration and groundwater recharge. According to the increasing importance of micropollutants in the water cycle, particular attention is paid to their competitive adsorption in presence of background organic matter. Clear illustrations, extensive literature references and a useful index make this work indispensible for both scientists and technicians involved in water treatment.

Download or read book Activated Carbon Adsorption written by Roop Chand Bansal and published by CRC Press. This book was released on 2005-05-24 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: High surface area, a microporous structure, and a high degree of surface reactivity make activated carbons versatile adsorbents, particularly effective in the adsorption of organic and inorganic pollutants from aqueous solutions. Activated Carbon Adsorption introduces the parameters and mechanisms involved in the activated carbon adsorption

Download or read book Pressure Swing Adsorption written by Douglas M. Ruthven and published by John Wiley & Sons. This book was released on 1996-12-17 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pressure Swing Adsorption is the first book that provides a coherent and concise summary of the underlying science and technology of pressure swing adsorption (PSA) processes at a level understandable to the practising engineer. PSA has achieved widespread commercial acceptance as the technology of choice for hydrogen purification, air separation and small scale air driers. However, PSA has numerous other actual and potential uses such as the recovery of methane from landfill gas, the production of carbon dioxide and other large scale applications. Since the design and optimization of a PSA process requires a somewhat mathematical model, two chapters of the book provide in-depth information on equilibrium theory and dynamic numerical simulation. However, this mathematical material will also help the general reader develop an understanding of the principles and strenghts and limitations of various approaches. PSA engineers, chemical engineers, environmental chemists, academicians and managers who must make informed decisions about purchasing costly PSA systems will find Pressure Swing Adsorption of particular value.