Download or read book Introduction a l tude de la corrosion m tallique dans les industries p troli res et chimique written by M. Ballay and published by . This book was released on 1952 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Corrosion Science written by Edward McCafferty and published by Springer Science & Business Media. This book was released on 2010-07-17 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is intended for a one-semester course in corrosion science at the graduate or advanced undergraduate level. The approach is that of a physical chemist or materials scientist, and the text is geared toward students of chemistry, materials science, and engineering. This textbook should also be useful to practicing corrosion engineers or materials engineers who wish to enhance their understanding of the fundamental principles of corrosion science. It is assumed that the student or reader does not have a background in electrochemistry. However, the student or reader should have taken at least an undergraduate course in materials science or physical chemistry. More material is presented in the textbook than can be covered in a one-semester course, so the book is intended for both the classroom and as a source book for further use. This book grew out of classroom lectures which the author presented between 1982 and the present while a professorial lecturer at George Washington University, Washington, DC, where he organized and taught a graduate course on “Environmental Effects on Materials.” Additional material has been provided by over 30 years of experience in corrosion research, largely at the Naval Research Laboratory, Washington, DC and also at the Bethlehem Steel Company, Bethlehem, PA and as a Robert A. Welch Postdoctoral Fellow at the University of Texas. The text emphasizes basic principles of corrosion science which underpin extensions to practice.
Download or read book Introduction l tude de la corrosion m tallique dans les industries p troli res et chimiques written by and published by . This book was released on 1952 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion of Metals written by Helmut Kaesche and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion due to water is one of the most significant and complex causes of damage to metallic products. Written from the viewpoint of physical chemistry, this authoritative and established text deals with the aqueous corrosion of metals. Available for the first time in English, Corrosion of Metal addressing engineers, metallurgists, physicists and chemists. This self-contained, valuable reference comprehensively organizes and makes readily accessible the accumulated wealth of fundamental and applied knowledge. The concentration is on the underlying essentials of corrosion and failure, and the material is consistently presented in relation to practical applications to corrosion protection. The first chapters introducing the physicochemical principles are ideal for students. The following chapters provide an overview of the state of research for those familiar with the fundamentals. An exhaustive bibliography and appendices conclude the volume.
Download or read book Corrosion Chemistry written by Volkan Cicek and published by John Wiley & Sons. This book was released on 2011-11-29 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion Chemistry details the scientific background of the corrosion process and contemporary applications for dealing with corrosion for engineers and scientists, covering the most recent breakthroughs and trends. Corrosion is in essence a chemical process, and it is crucial to understand the dynamics from a chemical perspective before proceeding with analyses, designs and solutions from an engineering aspect. This book can be used both as a textbook and a reference book both by academics and engineers and scientists in the field. As a reference for the engineer in the field, it is both a refresher for the veteran on the causes of corrosion and the methods, processes, and technologies to deal with it, over a variety of industries. It is the most up-to-date, comprehensive treatment of corrosion available, covering the most cutting-edge new processes and theories. For the freshman engineer just entering the field, it is a tremendous introduction to corrosion. As a textbook, it can be used for a single semester technical elective course in undergraduate and postgraduate education for disciplines such as chemistry, chemical engineering, petroleum engineering, civil engineering, material engineering, mechanical engineering, metallurgical engineering, mining engineering, agricultural engineering, and other related technical fields.
Download or read book Introduction to Corrosion Science written by Edward McCafferty and published by . This book was released on 2011-03-22 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Basic Corrosion Technology for Scientists and Engineers written by Einar Mattsson and published by CRC Press. This book was released on 2023-04-21 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introductory guide covering Basic Corrosion Technology for Scientists and Engineers first published in 1999.
Download or read book Corrosion and Corrosion Control written by R. Winston Revie and published by Wiley-Interscience. This book was released on 2008-03-21 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The classic book on corrosion science and engineering—now in a valuable new edition The ability to prevent failures by managing corrosion is one of the main global challengesof the twenty-first century. However, most practicing engineers and technologists have only a basic understanding of how they can actively participate in this urgent economic and environmental issue. Now, students and professionals can turn to this newly revised edition of the trusted Corrosion and Corrosion Control for coverage of the latest developments in the field, including advances in knowledge, new alloys for corrosion control, and industry developments in response to public demand. This Fourth Edition presents an updated overview of the essential aspects of corrosion science and engineering that underpin the tools and technologies used for managing corrosion, enhancing reliability, and preventing failures. Although the basic organization of the book remains unchanged from the previous edition, this new update includes: An introduction to new topics, including the element of risk management in corrosion engineering and new advanced alloys for controlling corrosion Expanded discussions on electrochemical polarization, predicting corrosion using thermodynamics, steel reinforcements in concrete, and applications of corrosion control technologies in automotive, nuclear, and other industries A stronger emphasis on environmental concerns and regulations in the context of their impact on corrosion engineering A discussion of the challenge of reliability in nuclear reactors; stainless steels; the concept of critical pitting temperature; and information on critical pitting potential (CPP) Complemented with numerous examples to help illustrate important points, Corrosion and Corrosion Control, Fourth Edition enables readers to fully understand corrosion and its control and, in turn, help reduce massive economic and environmental loss. It is a must-read for advanced undergraduates and graduate students in engineering and materials science courses, as well as for engineers, technologists, researchers, and other professionals who need information on this timely topic.
Download or read book Corrosion Characteristics Mechanisms and Control Methods of Candidate Alloys in Sub and Supercritical Water written by Donghai Xu and published by Springer Nature. This book was released on 2021-12-07 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to provide comprehensive and systematic introduction and summary of corrosion characteristics, mechanisms, and control methods of candidate alloys in sub- and supercritical water environment. First of all, corrosion types of candidate alloys and the effects of major alloying elements on corrosion resistance of potential alloys in sub- and supercritical water are compared and analyzed. At the same time, research status of candidate materials, and development and application trends of several corrosion-resistant alloys are summarized. Then, corrosion characteristics of Ni-Cr, Ni-Cr-Mo, Ni-Fe-Cr and Ni-Fe-Cr-Mo-Cu corrosion-resistant alloys, FeCrAl alloy, and Zircaloy are discussed in detail, including the corrosion rate, the structure and composition of oxide film, and the effects of various surface treatment processes, etc. More specifically, it also investigates corrosion behavior of Ni-based alloy, Fe-Ni-based, and stainless steels in supercritical water. The effects of aggressive species on the corrosion behavior of Ni-base alloys are also explored in supercritical water. Readers will further discover the total corrosion processes and mechanisms of typical candidate alloys in sub- and supercritical water environment. Finally, the work explores the corrosion control methods such as ceramic coatings and passivation processes in supercritical water oxidation and in subcritical water, respectively. Future challenges and development trends of corrosion research of candidate materials in sub- and supercritical water environments are covered at the end of this book. It offers valuable reference for theoretically guiding material selection and design and operating parameter optimization of key equipment in the sub- and supercritical water technologies. The book is written for senior undergraduates, graduate students, scholars, and researchers who are interested in corrosion behavior of candidate materials of supercritical water oxidation system, supercritical water gasification system, and nuclear reactor.
Download or read book Corrosion in the Petrochemical Industry written by Linda Garverick and published by ASM International. This book was released on 1994-01-01 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive collection of peer-reviewed data and information on corrosion in the petroleum, petrochemical, and chemical processing industries from a number of ASM International publications. The principal sources are Corrosion, Volume 13, and Failure Analysis and Prevention, Volume 11 of ASM H
Download or read book Corrosion and Materials in the Oil and Gas Industries written by Reza Javaherdashti and published by CRC Press. This book was released on 2016-04-19 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advancement of methods and technologies in the oil and gas industries calls for new insight into the corrosion problems these industries face daily. With the application of more precise instruments and laboratory techniques as well as the development of new scientific paradigms, corrosion professionals are also witnessing a new era in the way d
Download or read book Corrosion Science Modern Trends and Applications written by N. Suresh Kumar and published by Bentham Science Publishers. This book was released on 2021-05-24 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advent of Industry 4.0 has opened a data-rich avenue of predicting and controlling premature degradation of industrial materials. For any industrial construction or manufacturing projects, performing analysis on the structural integrity of materials is crucial for their sustainability. Corrosion Science: Modern Trends and Applications gives scholars a snapshot of recent contributions and development in the field of material corrosion. The book presents 12 chapters that cover topics such as corrosion testing methods, anti-corrosive coating mechanisms, corrosion in different types of products (electronics, polymers), industrial systems (power plants, concrete constructions, and hydraulic systems), and corrosion as a result of environmental characteristics (such as marine surroundings). The breadth of topics covered coupled with the reader-friendly presentation of the book make it highly beneficial for students, research scholars, faculty members, and R&D specialists working in the area of corrosion science, material science, solid-state science, chemical engineering, and nanotechnology. Readers will be equipped with the knowledge to understand and plan industrial processes that involve measuring the reliability and integrity of material structures which are impacted by corrosive factors.
Download or read book A Treatise on Corrosion Science Engineering and Technology written by U. Kamachi Mudali and published by Springer Nature. This book was released on 2022-05-04 with total page 797 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume elaborates on various corrosion processes in different applications and their prevention strategies. It comprehensively covers the principles of corrosion, engineering issues, methods of corrosion protection and defines corrosion processes and control in select aggressive end industrial environments. The contents especially focus on corrosion issues in nuclear, aerospace, marine, high temperature, bioimplants, automobile, and addresses the application of advanced materials to mitigate them. A special section on corrosion prevention strategies with innovative solutions to resolve corrosion issues in various environments is the highlight of this book. This volume will be a useful guide for those in research, academia and industry, particularly to know state of art in corrosion control and prevention for various practical applications.
Download or read book Corrosion and Surface Chemistry of Metals written by Dieter Landolt and published by CRC Press. This book was released on 2007-05-02 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a carefully developed and comprehensive overview of the corrosion chemistry of metallic materials, this book covers the principal methods of corrosion prevention. It includes a systematic study of the physical chemistry of the surface supported by state-of-the-art analysis methods. The author builds a scientific foundation by developing t
Download or read book Corrosion for Everybody written by Alec Groysman and published by Springer Science & Business Media. This book was released on 2009-11-21 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: People seldom enjoy corrosion. They usually perceive it as a nasty phenomenon with which they must cope. Yet many people, far from the corrosion field, come across it because of their professional duty. Lawyers, historians, doctors, architects, philosophers, artists, and archeologists, to name a few, may want or need to understand the principles of corrosion. This volume explains this important topic in a lucid, interesting, and popular form to everybody: to students and young engineers who are only beginning their studies, to scientists and engineers who have dealt with corrosion for many years, and to non-specialists involved in corrosion problems. The book uses a fresh writing style, with some new explanations relating to thermodynamics of oxidation of iron and mild steels in water, reversible and irreversible potential, solubility of oxygen in water and aqueous solutions of electrolytes, corrosion of metals in fuels, corrosion of storage tanks for fuels and their corrosion control, corrosion monitoring in practice, humanitarian aspects of corrosion science and technology (history of the evolution of knowledge about corrosion, relationships between corrosion and philosophy, corrosion and art). Many practical examples of various corrosion phenomena are given.
Download or read book La corrosion dans l industrie chimique written by Yves Cètre and published by . This book was released on 2021-06-17 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion Science and Technology written by David E.J. Talbot and published by CRC Press. This book was released on 2018-01-29 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: Twenty years after its first publication, Corrosion Science and Technology continues to be a relevant practical guide for students and professionals interested in material science. This Third Edition thoroughly covers the basic principles of corrosion science in the same reader-friendly manner that made the previous edition invaluable, and enlarges the scope of the content with expanded chapters on processes for various metals and new technologies for limiting costs and metal degradation in a variety of commercial enterprises not explored in previous editions. This book also presents expertly developed methods of corrosion testing and prediction.
