Download or read book Intrinsically Conducting Polymers An Emerging Technology written by M. Aldissi and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the majority of the papers presented at the NATO Ad vanced Research Workshop (ARW) held in Burlington, Vermont, USA on October 12-15, 1992. This ARW was the first of its kind to address the subject of intrinsically conducting polymers with an emphasis on processing and technological applications. The NATO ARW format was followed in that the subjects addressed here were limited in number but discussed in detail with the attendance being limited to a small number of selected scientists. The ARW brought together lecturers who are leaders in their respective fields from a wide range of NATO and non-NATO countries (a total of 11 countries) with the support of the NATO Scientific Affairs Division and some support from Champlain Cable Corporation. The total number of par ticipants was 33 and the number of presentations was 24. The speakers were chosen based on the topics selected for this workshop and repre sented industry, universities and government laboratories. The field of conducting polymers has grown rapidly during the past few years with important developments in materials processing and fabrica tion that brought about active research programs focusing on the use of these polymers as "smart" materials in technological applications and devices in academic and industrial research laboratories.
Download or read book PEDOT written by Andreas Elschner and published by CRC Press. This book was released on 2010-11-02 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: While there is information available in handbooks on polythiophene chemistry and physics, until now, few if any books have focused exclusively on the most forwardly developed electrically conductive polymer, Poly (3,4-ethylenedioxythiophene)-otherwise known as PEDOT. This resource provides full chemical, physical, and technical information about this important conducting polymer, discussing basic knowledge and exploring its technical applications. Presented information is based on information generated at universities and through academic research, as well as by industrial scientists, providing a complete picture of the experimental and the practical aspects of this important polymer.
Download or read book Corrosion Protection of Metals by Intrinsically Conducting Polymers written by Pravin P. Deshpande and published by CRC Press. This book was released on 2016-01-13 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of conducting polymers for the anticorrosion protection of metals has attracted great interest during the last 30 years. The design and development of conducting polymers-based coating systems with commercial viability is expected to be advanced by applying nanotechnology and has received substantial attention recently. This book begins wit
Download or read book Conducting Polymers written by György Inzelt and published by Springer Science & Business Media. This book was released on 2008-04-08 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a systematic survey of the knowledge accumulated in this field in the last thirty years. It includes material on the thermodynamic aspects of the polymers, the theory of the mechanism of charge transport processes, and the chemical and physical properties of these compounds. Also covered are the techniques of characterization, the electrochemical methods of synthesis, and the application of these systems. Inzelt’s book is a must-read for electrochemists and others.
Download or read book Recent Advances in Intrinsically Conducting Polymers and Composites written by Bluma Guenther Soares and published by Frontiers Media SA. This book was released on 2020-09-18 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: This eBook is a collection of articles from a Frontiers Research Topic. Frontiers Research Topics are very popular trademarks of the Frontiers Journals Series: they are collections of at least ten articles, all centered on a particular subject. With their unique mix of varied contributions from Original Research to Review Articles, Frontiers Research Topics unify the most influential researchers, the latest key findings and historical advances in a hot research area! Find out more on how to host your own Frontiers Research Topic or contribute to one as an author by contacting the Frontiers Editorial Office: frontiersin.org/about/contact.
Download or read book Doping in Conjugated Polymers written by Pradip Kar and published by John Wiley & Sons. This book was released on 2013-08-01 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: An A-to-Z of doping including its definition, its importance, methods of measurement, advantages and disadvantages, properties and characteristics—and role in conjugated polymers The versatility of polymer materials is expanding because of the introduction of electro-active behavior into the characteristics of some of them. The most exciting development in this area is related to the discovery of intrinsically conductive polymers or conjugated polymers, which include such examples as polyacetylene, polyaniline, polypyrrole, and polythiophene as well as their derivatives. "Synmet" or "synthetic metal" conjugated polymers, with their metallic characteristics, including conductivity, are of special interest to researchers. An area of limitless potential and application, conjugated polymers have sparked enormous interest, beginning in 2000 when the Nobel Prize for the discovery and development of electrically conducting conjugated polymers was awarded to three scientists: Alan J. Heeger, Alan G. MacDiarmid, and Hideki Shirakawa. Conjugated polymers have a combination of properties—both metallic (conductivity) and polymeric; doping gives the conjugated polymer's semiconducting a wide range of conductivity, from insulating to low conducting. The doping process is a tested effective method for producing conducting polymers as semiconducting material, providing a substitute for inorganic semiconductors. Doping in Conjugated Polymers is the first book dedicated to the subject and offers a comprehensive A-to-Z overview. It details doping interaction, dopant types, doping techniques, and the influence of the dopant on applications. It explains how the performance of doped conjugated polymers is greatly influenced by the nature of the dopants and their level of distribution within the polymer, and shows how the electrochemical, mechanical, and optical properties of the doped conjugated polymers can be tailored by controlling the size and mobility of the dopants counter ions. The book also examines doping at the nanoscale, in particular, with carbon nanotubes. Readership The book will interest a broad range of researchers including chemists, electrochemists, biochemists, experimental and theoretical physicists, electronic and electrical engineers, polymer and materials scientists. It can also be used in both graduate and upper-level undergraduate courses on conjugated polymers and polymer technology.
Download or read book Advances in Hybrid Conducting Polymer Technology written by Syed Shahabuddin and published by Springer Nature. This book was released on 2021-01-11 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents synthesis methods, characterization techniques, properties and applications of hybrid conducting polymers. Special emphasis is given to the applications of hybrid conductive polymers, with chapters ranging from electronic devices, environmental remediation, and sensors, to medical applications.
Download or read book Conductive Polymers and Plastics written by Larry Rupprecht and published by William Andrew. This book was released on 1999-12-31 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of papers by individuals in industry and academia on research and application development of conductive polymers and plastics. Conductive plastics are positioned to play an increasingly important role in affairs of mankind, specifically in the area of electrical and electronic conductivity. While general knowledge about conductive polymers and plastics has been available for many years, a true understanding of their application has only taken place in the last 3 to 4 years. This is attributed to advances in materials and processing techniques. Engineers have only begun to explore the design freedom and economic benefits of specifying conductive polymers and plastics in industrial and business applications. This book is a key reference and guide to the use of conductive polymers and plastics. It is a summary of existing technologies, but also a look at future possibilities.
Download or read book Conductive Polymers II written by R. H. Friend and published by iSmithers Rapra Publishing. This book was released on 1993 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report explains the theory of polymer conductivity, and discusses developments in the synthesis of the major polymers. A detailed section on practical applications follows a discussion of the improved electrical and mechanical properties and environmental stability which make such applications possible. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database provides useful references for further reading.
Download or read book Intrinsically Conducting Polymers written by M. Aldissi and published by . This book was released on 2014-01-15 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cutting Edge Enabling Technologies for Regenerative Medicine written by Heung Jae Chun and published by Springer. This book was released on 2018-10-24 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores in depth the latest enabling technologies for regenerative medicine. The opening section examines advances in 3D bioprinting and the fabrication of electrospun and electrosprayed scaffolds. The potential applications of intelligent nanocomposites are then considered, covering, for example, graphene-based nanocomposites, intrinsically conductive polymer nanocomposites, and smart diagnostic contact lens systems. The third section is devoted to various drug delivery systems and strategies for regenerative medicine. Finally, a wide range of future enabling technologies are discussed. Examples include temperature-responsive cell culture surfaces, nanopatterned scaffolds for neural tissue engineering, and process system engineering methodologies for application in tissue development. This is one of two books to be based on contributions from leading experts that were delivered at the 2018 Asia University Symposium on Biomedical Engineering in Seoul, Korea – the companion book examines in depth novel biomaterials for regenerative medicine.
Download or read book Biomedical Applications of Polymeric Materials and Composites written by Raju Francis and published by John Wiley & Sons. This book was released on 2016-12-19 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: With its content taken from only the very latest results, this is an extensive summary of the various polymeric materials used for biomedical applications. Following an introduction listing various functional polymers, including conductive, biocompatible and conjugated polymers, the book goes on to discuss different synthetic polymers that can be used, for example, as hydrogels, biochemical sensors, functional surfaces, and natural degradable materials. Throughout, the focus is on applications, with worked examples for training purposes as well as case studies included. The whole is rounded off with a look at future trends.
Download or read book Electrical Conductive Adhesives with Nanotechnologies written by Yi (Grace) Li and published by Springer Science & Business Media. This book was released on 2009-10-08 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Electrical Conductive Adhesives with Nanotechnologies” begins with an overview of electronic packaging and discusses the various adhesives options currently available, including lead-free solder and ECAs (Electrically Conductive Adhesives). The material presented focuses on the three ECA categories specifically, Isotropically Conductive Adhesives (ICAs) Anisotropically Conductive Adhesives/Films (ACA/ACF) and Nonconductive Adhesives/Films (NCA/NCF). Discussing the advantages and limitations of each technique, and how each technique is currently applied. Lastly, a detailed presentation of how nano techniques can be applied to conductive adhesives is discussed, including recent research and development of nano component adhesives/nano component films, their electrical properties, thermal performance, bonding pressure and assembly and reliability.
Download or read book Transparent Conductive Materials written by David Levy and published by John Wiley & Sons. This book was released on 2019-04-29 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by well-known pioneers in the field, this handbook and ready reference provides a comprehensive overview of transparent conductive materials with a strong application focus. Following an introduction to the materials and recent developments, subsequent chapters discuss the synthesis and characterization as well as the deposition techniques that are commonly used for energy harvesting and light emitting applications. Finally, the book concludes with a look at future technological advances. All-encompassing and up-to-date, this interdisciplinary text runs the gamut from chemistry and materials science to engineering, from academia to industry, and from fundamental challenges to readily available applications.
Download or read book Conducting Polymer Based Nanocomposites written by Ayesha Kausar and published by Elsevier. This book was released on 2021-04-28 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conducting Polymer-Based Nanocomposites: Fundamentals and Applications delivers an up-to-date overview on cutting-edge advancements in the field of nanocomposites derived from conjugated polymeric matrices. Design of conducting polymers and resultant nanocomposites has instigated significant addition in the field of modern nanoscience and technology. Recently, conducting polymer-based nanocomposites have attracted considerable academic and industrial research interest. The conductivity and physical properties of conjugated polymers have shown dramatic improvement with nanofiller addition. Appropriate fabrication strategies and the choice of a nanoreinforcement, along with a conducting matrix, may lead to enhanced physicochemical features and material performance. Substantial electrical conductivity, optical features, thermal stability, thermal conductivity, mechanical strength, and other physical properties of the conducting polymer-based nanocomposites have led to high-performance materials and high-tech devices and applications. This book begins with a widespread impression of state-of-the-art knowledge in indispensable features and processing of conducting polymer-based nanocomposites. It then discusses essential categories of conducting polymer-based nanocomposites such as polyaniline, polypyrrole, polythiophene, and derived nanomaterials. Subsequent sections of this book are related to the potential impact of conducting polymer-based nanocomposites in various technical fields. Significant application areas have been identified for anti-corrosion, EMI shielding, sensing, and energy device relevance. Finally, the book covers predictable challenges and future opportunities in the field of conjugated nanocomposites. Integrates the fundamentals of conducting polymers and a range of multifunctional applications Describes categories of essential conducting polymer-based nanocomposites for polyaniline, polypyrrole, polythiophene, and derivative materials Assimilates the significance of multifunctional nanostructured materials of nanocomposite nanofibers Portrays current and future demanding technological applications of conjugated polymer-based nanocomposites, including anti-corrosion coatings, EMI shielding, sensors, and energy production and storage devices
Download or read book Redox Polymers for Energy and Nanomedicine written by Nerea Casado and published by Royal Society of Chemistry. This book was released on 2020-10-20 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: Redox Polymers for Energy and Nanomedicine highlights trends in the chemistry, characterization and application of polymers with redox properties.
Download or read book Inherently Conducting Polymers written by M. Aldissi and published by Taylor & Francis. This book was released on 1989-12-31 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: "From the Forward: " Processing, fabrication, applications, and limitations of inherently conducting polymers are covered in this book. Electrically conducting polymers have many potential applications and thus are a focus of research interest. Such polymers depend on a conjugated backbone that can be doped with highly reactive materials to increase conductivity, but this backbone is also the source of instability in these materials. The work described concentrates on solving these instability problems, using various doping techniques to yield polymers more stable than polyacetylene, (CH)x, the first extensively characterized covalent organic polymer. Several methods of synthesizing conjugated polymers and ways of doping the conjugated backbone are described. The stability of pristine and doped polymers is examined in ambient atmosphere and under thermal treatment, and several stabilization techniques are discussed, including chemical doping, ion implantation, plastification, copolymerization, antioxidative treatments, surface protection, and the use of crown ethers. Although considerable progress has been made, a fully stable, highly conductive polymer still awaits development. Various possible uses of such a polymer and the conditions for successful applications are described, as are the relative advantages and disadvantages of currently available polymers.