Download or read book Intersystem EMC Analysis Interference and Solutions written by Uri Vered and published by Artech House. This book was released on 2018-05-31 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive new resource provides methods and tools for defining EMC requirements and techniques for performing predictions and calculations to achieve electromagnetic compatibility. This book demonstrates how radar, communications, and navigation systems can function without interference. EMC requirements for the device, platform, site, and arena level are discussed and EMC detection analysis is utilized to predict EMC problems. The book explores the interference between receiving and transmitting electronic systems and examines intersystem and intrasystem EMC. Techniques and mathematical framework for performing EMC prediction and calculations to solve electromagnetic compatibility problems are highlighted. Moreover, this book presents classic methods and several original EMC calculation procedures including new approaches in mathematical development of interference probability calculations. Readers learn how to anticipate problems and then define EMC solutions.
Download or read book EMC Analysis written by Uri Vered and published by . This book was released on 2016-12-19 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Trying to solve electromagnetic compatibility (EMC) problems after designing a project is more costly, if not impossible, than considering electromagnetic compatibility at the outset of a design cycle. Early consideration of EMC is required to ensure the proper operation of transmitting and receiving systems in their respective operational electromagnetic environments. The objective of this textbook is to provide methods for defining EMC requirements as well as techniques and equations for performing EMC predictions and calculations to achieve solutions for electromagnetic compatibility problems.The author has had many decades of practical experience, including several original calculation techniques and procedures, such as: The probability of interference in terms of the frequency difference between two devices, each operating within its own frequency band; The probability of interference in case of devices transmitting and receiving pulses, according to the probability that the pulses will overlap; The case where interference may be transmitted or received via the side lobes of devices whose antennas being directed towards any angle in space, but only cardinal, or principal, plane antenna patterns are available, rather than 3D data; Near field coupling approximation and more.This textbook, will provide personnel dealing with inter-system EMC and intra-system EMC, with the tools for performing their EMC tasks. Although the book is meant for all transmitting and receiving systems and devices, the text and the examples emphasize military applications. The 254-page book contains many full color figures, over three hundred equations and for those cases in which all EMC related data is not available for analysis, suggestions for default values. The Table of contents:ForewordObjectivesDefinitionsEMC RequirementsMaximum allowed interference level EMC analysis and surveyInterference types: Interference from both the transmitter and receiver; Interference from the transmitter; Interference from the receiverCalculating the received interference level, Interference margin and its meaningIn-band and out-of-band interferenceThe interference range and the reception range,Propagation models for EMCCoupling between antennas; Relative angles between antennas: Antenna gain in intercardinal angles; Near field, Interference probabilityProbability of frequency difference; Probability of pulse interference EMC between synchronous hopping devices; EMC solutions: EMC testsAppendix - Device EMC specifications table.
Download or read book Electromagnetic Diffraction Modeling and Simulation with MATLAB written by Gökhan Apaydin and published by Artech House. This book was released on 2021-02-28 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: This exciting new resource presents a comprehensive introduction to the fundamentals of diffraction of two-dimensional canonical structures, including wedge, strip, and triangular cylinder with different boundary conditions. Maxwell equations are discussed, along with wave equation and scattered, diffracted and fringe fields. Geometric optics, as well as the geometric theory of diffraction are explained. With MATLAB scripts included for several well-known electromagnetic diffraction problems, this book discusses diffraction fundamentals of two-dimensional structures with different boundary conditions and analytical numerical methods that are used to show diffraction. The book introduces fundamental concepts of electromagnetic problems, identities, and definitions for diffraction modeling. Basic coordinate systems, boundary conditions, wave equation, and Green’s function problem are given. The scattered fields, diffracted fields, and fringe fields, radar cross section for diffraction modeling are presented. Behaviors of electromagnetic waves around the two-dimensional canonical wedge and canonical strip are also explored. Diffraction of trilateral cylinders and wedges with rounded edges is investigated as well as double tip diffraction using Finite Difference Time Domain and Method of Moments. A MATLAB based virtual tool, developed with graphical user interface (GUI), for the visualization of both fringe currents and fringe waves is included, using numerical FDTD and MoM algorithm and High-Frequency Asymptotics approaches.
Download or read book Electromagnetics for Engineers Volume 1 Electrostatics and Magnetostatics written by Dean James Friesen and published by Artech House. This book was released on 2023-12-31 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electromagnetism for Engineers, VOL. I: Electrostatics is a comprehensive introduction to the fundamental principles of electromagnetism, making it an indispensable source for a wide range of readers. This volume covers the essential concepts of electrostatics, including Coulomb's law, electric fields, Gauss's law, and vector mathematics, which forms a foundational tool throughout the book. What sets this book apart are the numerous illustrations and diagrams that visually elucidate complex topics, ensuring a clear and thorough understanding. To reinforce learning, the text includes problem and solution sets, giving readers an opportunity to apply the concepts they have acquired. This book is particularly valuable for college graduates and engineering students who are beginning their journey into the realm of electromagnetism. It is also an excellent reference for practicing engineers seeking to refresh their knowledge of the basic principles of electromagnetism. With a focus on both theory and practical application, this volume provides a strong foundation for readers at various stages of their engineering education and career.
Download or read book Principles and Techniques of Electromagnetic Compatibility written by Christos Christopoulos and published by CRC Press. This book was released on 1995-02-22 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unlike other publications, this new book offers a different approach to the study of electromagnetic compatibility (EMC). It emphasizes the understanding of relevant electromagnetic interactions in increasingly complex systems. Mathematical tools are introduced when pursuing the physical picture unaided becomes counterproductive. In order to handle complexity, numerical tools are developed and the basis and capabilities of these tools are presented. Part I of the book covers underlying concepts and techniques. This includes discussions on electromagnetic fields, electrical circuit components, and electrical signals and circuits. The second part deals with general EMC concepts and techniques and will be useful for predicting the EMC behavior of systems. More practical techniques used to control electromagnetic interference and the design of EMC into products are presented in Part III. The main EMC standards and test techniques are described in the final part of the book. Chapters are designed to allow readers to study the entire book at a pace which reflects their own background and interests. The book appeals to both EMC applications-oriented and analysis-oriented readers. This text provides useful source material for a serious study of EMC, including references to more advanced work.
Download or read book EMC Analysis Methods and Computational Models written by Frederick M. Tesche and published by John Wiley & Sons. This book was released on 1996-12-26 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes and illustrates various modeling techniques which are applicable to the area of EMC and includes material previously available only in international reports or other hard-to-obtain references. Electromagnetic topology, lumped-parameter circuit models, the radiation process, scalar diffraction theory for apertures, transmission line modeling, and models for shielding are among the topics discussed. The accompanying disk contains four programs based on the models developed in the text and can be used to calculate diverse transmission line responses.
Download or read book Electromagnetic Interference and Electromagnetic Compatibility written by L. Ashok Kumar and published by CRC Press. This book was released on 2023-10-02 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electromagnetic compatibility is concerned with the generation, transmission, and reception of electromagnetic energy. The book discusses about the basic principles of electromagnetic interference (EMI) and electromagnetic compatibility (EMC) including causes, events, and mitigation of issues. The design procedures for EMI filter, the types of filters, and filter implementation methods are explained. The simulation of printed circuit board designs using different software and a step-by-step method is discussed in detail. This book addresses the gap between theory and practice using case studies with design, experiments, and supporting analysis. Features: Discusses about the basic principles of EMI/EMC including causes and events Makes readers understand the problems in different applications because of EMI/EMC and the reducing methods Explores real-world case studies with code to provide hands-on experience Reviews design strategies for mitigation of noise Includes MATLAB, PSPICE, and ADS simulations for designing EMI Filter circuits. The book is aimed at graduate students and researchers in electromagnetics, circuit and systems, and electrical engineering.
Download or read book EMC in Power Electronics written by Laszlo Tihanyi and published by Newnes. This book was released on 1995-04-04 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronics professionals will find this book invaluable when designing power equipment, because it describes in detail how to cope with the problem of electromagnetic interference. The author shows how to meet the exacting US and European EMC standards for conducted emissions. The book includes a wide range of EMI analysis techniques. An important focus is on the energy content of interference transient signals (traditional analysis concentrates on amplitude and frequency). This provides a more accurate picture of the EMI situation. For those who do not want or need detailed analysis techniques, many approximation methods are also provided. These simplified techniques give accurate results for all but the most stringent applications. The book contains several worked examples and an extensive bibliography, and is sure to be useful to electronic design engineers and others who need to meet international EMC regulations and standards. Laszlo Tihanyi has worked on EMC for over 20 years. Formerly Head of the Department of Power Electronics at the Hungarian Research Institute for the Electrical Industry, he focused primarily on solving EMI problems in electronic systems and developing a dimensioning method for power line filters.
Download or read book Electromagnetic Interference and Compatibility written by Paolo Stefano Crovetti and published by MDPI. This book was released on 2021-08-31 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent progress in the fields of Electrical and Electronic Engineering has created new application scenarios and new Electromagnetic Compatibility (EMC) challenges, along with novel tools and methodologies to address them. This volume, which collects the contributions published in the “Electromagnetic Interference and Compatibility” Special Issue of MDPI Electronics, provides a vivid picture of current research trends and new developments in the rapidly evolving, broad area of EMC, including contributions on EMC issues in digital communications, power electronics, and analog integrated circuits and sensors, along with signal and power integrity and electromagnetic interference (EMI) suppression properties of materials.
Download or read book Modern EMC Analysis Techniques Volume II written by Nikolaos V. Kantartzis and published by Morgan & Claypool Publishers. This book was released on 2008-07-08 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this two-volume book is the systematic and comprehensive description of the most competitive time-domain computational methods for the efficient modeling and accurate solution of modern real-world EMC problems. Intended to be self-contained, it performs a detailed presentation of all well-known algorithms, elucidating on their merits or weaknesses, and accompanies the theoretical content with a variety of applications. Outlining the present volume, numerical investigations delve into printed circuit boards, monolithic microwave integrated circuits, radio frequency microelectromechanical systems as well as to the critical issues of electromagnetic interference, immunity, shielding, and signal integrity. Biomedical problems and EMC test facility characterizations are also thoroughly covered by means of diverse time-domain models and accurate implementations. Furthermore, the analysis covers the case of large-scale applications and electrostatic discharge problems, while special attention is drawn to the impact of contemporary materials in the EMC world, such as double negative metamaterials, bi-isotropic media, and several others. Table of Contents: Introduction / Printed Circuit Boards in EMC Structures / Electromagnetic Interference, Immunity, Shielding, and Signal Integrity / Bioelectromagnetic Problems: Human Exposure to Electromagnetic Fields / Time-Domain Characterization of EMC Test Facilities / Large-Scale EMC and Electrostatic Discharge Problems / Contemporary Material Modeling in EMC Applications
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1976 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electromagnetic Compatibility written by David Weston and published by CRC Press. This book was released on 2017-12-19 with total page 857 pages. Available in PDF, EPUB and Kindle. Book excerpt: This totally revised and expanded reference/text provides comprehensive, single-source coverage of the design, problem solving, and specifications of electromagnetic compatibility (EMC) into electrical equipment/systems-including new information on basic theories, applications, evaluations, prediction techniques, and practical diagnostic options for preventing EMI through cost-effective solutions. Offers the most recent guidelines, safety limits, and standards for human exposure to electromagnetic fields! Containing updated data on EMI diagnostic verification measurements, as well as over 900 drawings, photographs, tables, and equations-500 more than the previous edition-Electromagnetic Compatibility: Principles and Applications, Second Edition:
Download or read book Modern EMC Analysis Techniques Volume II written by Nikolaos Kantartzis and published by Springer. This book was released on 2008-06-20 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this two-volume book is the systematic and comprehensive description of the most competitive time-domain computational methods for the efficient modeling and accurate solution of modern real-world EMC problems. Intended to be self-contained, it performs a detailed presentation of all well-known algorithms, elucidating on their merits or weaknesses, and accompanies the theoretical content with a variety of applications. Outlining the present volume, numerical investigations delve into printed circuit boards, monolithic microwave integrated circuits, radio frequency microelectromechanical systems as well as to the critical issues of electromagnetic interference, immunity, shielding, and signal integrity. Biomedical problems and EMC test facility characterizations are also thoroughly covered by means of diverse time-domain models and accurate implementations. Furthermore, the analysis covers the case of large-scale applications and electrostatic discharge problems, while special attention is drawn to the impact of contemporary materials in the EMC world, such as double negative metamaterials, bi-isotropic media, and several others. Table of Contents: Introduction / Printed Circuit Boards in EMC Structures / Electromagnetic Interference, Immunity, Shielding, and Signal Integrity / Bioelectromagnetic Problems: Human Exposure to Electromagnetic Fields / Time-Domain Characterization of EMC Test Facilities / Large-Scale EMC and Electrostatic Discharge Problems / Contemporary Material Modeling in EMC Applications
Download or read book Design Technology of System Level EMC Engineering written by Xiaobin Tang and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-08-24 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the state-of-the-art research progress of system-level EMC, including theories, design technologies, principles and applications in practice. The engineering design, simulation, prediction, analysis, test, stage control as well as effectiveness evaluation are discussed in detail with extensive project experiences, making the book an essential reference for researchers and industrial engineers.
Download or read book Engineering Electromagnetic Compatibility written by V. Prasad Kodali and published by Wiley-IEEE Press. This book was released on 2001-01-19 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical Engineering Engineering Electromagnetic Compatibility Principles, Measurements, Technologies, and Computer Models Second Edition This practical, enhanced second edition will teach you to avoid costly post-design electromagnetic compatibility (EMC) fixes. Once again, V. Prasad Kodali provides a comprehensive introduction to EMC and presents current technical information on sources of electromagnetic interference (EMI), EMC/EMI measurements, technologies to control EMI, computer simulation and design, and international EMC standards. Features added to this second edition include: * Two new chapters covering EMC computer modeling and simulation and signal integrity * Expanded assignments at the close of each chapter * Illustrative examples that enhance comprehension * Updated information in Selected Bibliography and EMC Standards chapters * A new appendix that lists websites relevant to EMC/EMI Engineering Electromagnetic Compatibility, Second Edition is presented in a concise, user-friendly format that combines a rigorous solutions-based, mathematical treatment of the underlying theories of EMC with the most recent practical applications. It is ideally suited as a desk reference for practicing engineers and as a textbook for students who need to understand the form and function of EMC and its relevance to a variety of systems.
Download or read book Electromagnetic Compatibility in Power Electronics written by László Tihanyi and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1995 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronics professionals will find this book invaluable when designing power equipment, because it describes in detail how to cope with the problem of electromagnetic interference. The author shows how to meet the exacting US and European EMC standards for conducted emissions. The book includes a wide range of EMI analysis techniques. An important focus is on the energy content of interference transient signals (traditional analysis concentrates on amplitude and frequency). This provides a more accurate picture of the EMI situation. For those who do not want or need detailed analysis techniques, many approximation methods are also provided. These simplified techniques give accurate results for all but the most stringent applications. The book contains several worked examples and an extensive bibliography, and is sure to be useful to electronic design engineers and others who need to meet international EMC regulations and standards. Laszlo Tihanyi has worked on EMC for over 20 years. Formerly Head of the Department of Power Electronics at the Hungarian Research Institute for the Electrical Industry, he focused primarily on solving EMI problems in electronic systems and developing a dimensioning method for power line filters.
Download or read book Proceedings of the International Conference on Electromagnetic Interference and Compatibility written by and published by . This book was released on 1999 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: