Download or read book Algorithms and Architectures for Real Time Control 1991 written by P.J. Fleming and published by Elsevier. This book was released on 2014-07-22 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer scientists have long appreciated that the relationship between algorithms and architecture is crucial. Broadly speaking the more specialized the architecture is to a particular algorithm then the more efficient will be the computation. The penalty is that the architecture will become useless for computing anything other than that algorithm. This message holds for the algorithms used in real-time automatic control as much as any other field. These Proceedings will provide researchers in this field with a useful up-to-date reference source of recent developments.
Download or read book Algorithms and Architectures for Real time Control AARTC 95 written by Peter J. Fleming and published by Pergamon. This book was released on 1995 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Paperback. The 3rd IFAC/IFIP Workshop on Algorithms and Architectures for Real-Time Control is concerned with new architectural software and hardware aspects for real-time control. This, the latest in the series, investigates the state of the art and present new research and application results in software and hardware for real-time control. The workshop brings together leading engineers and computer scientists who are researchers, developers and practitioners, both from the academic and industrial world, to discuss recent developments.
Download or read book Algorithms and Architectures for Real time Control 1997 AARTC 97 written by António E. Ruano and published by Pergamon. This book was released on 1997 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings contain the selection of papers presented at the IFAC Workshop on Algorithms and Architectures for Real-Time Control (AARTC '97) held at the Vilamoura Marina Hotel, Vilamoura, Portugal. Rapid developments in microelectronics and computer science continue to provide opportunities for real-time control engineers to address new challenges. New opportunities arise from such diverse directions as ever-increasing system complexity and sophistication, environmental legislation, economic competition, safety and reliability. These are typical themes which were highlighted at the IFAC AARTC '97 Workshop. The AARTC '97 Final Programme consisted of 22 sessions covering major areas of software, hardware and applications for real-time control. Important topics were "soft" computing methods, software tools and architectures, embedded systems, parallel and distributed systems, architectures, custom processors, algorithms, estimation methods, neural networks, fuzzy methods, PID controllers, transport applications, industrial process control, robotics, and discrete-event and hybrid systems.
Download or read book Algorithms and Architectures for Real Time Control 2000 written by V. Hernandez and published by Pergamon. This book was released on 2000-12-04 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 6th IFAC Workshop on Algorithms and Architectures for Real-Time Control (AARTC'2000) was held at Palma de Mallorca, Spain. The objective, as in previous editions, was to show the state-of-the-art and to present new developments and research results in software and hardware for real-time control, as well as to bring together researchers, developers and practitioners, both from the academic and the industrial world. The AARTC'2000 Technical Program consisted of 11 presented sessions, covering the major areas of software, hardware and applications for real-time control. In particular, sessions adressed robotics, embedded systems, modeling and control, fuzzy logic methods, industrial process control and manufacturing systems, neural networks, parallel and distributed processing, processor architectures for control, software design tools and methodologies, and SCADA and multi-layer control. A total of 38 papers were selected from high-quality full draft papers and late breaking paper contributions (consisting of extended abstracts). Participants from 15 countries attended the AARTC'2000 workshop. The technical program also included two plenary talks given by leading experts in the field. Roger Goodall (Department of Electronic and Electrical Engineering, Loughborough University, UK) presented "Perspectives on processing for real-time control", and Ricardo Sanz (Universidad Politécnica de Madrid, Spain), focused on "CORBA for Control Systems". Another highlight in the program was the final session on industrial presentations which was held in common with the Workshop on Real-Time Programming (WRTP'2000). In this session, Abel Jiménez (Industria de Turbo Propulsores S. A., Spain) presented the "Thrust Vectoring System Control Concept", Ulrich Schmid (Technische Universität Wien, Austria) made a presentation with the title "Applied Research: A Scientist's Perspective", and Harold W. Lawson (Lawson Konsult AB, Sweden) addressed "Systems Engineering of a Successful Train Control System".
Download or read book The Engineering of Complex Real Time Computer Control Systems written by George W. Irwin and published by Springer. This book was released on 2007-11-23 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Engineering of Complex Real-Time Computer Control Systems brings together in one place important contributions and up-to-date research results in this important area. The Engineering of Complex Real-Time Computer Control Systems serves as an excellent reference, providing insight into some of the most important research issues in the field.
Download or read book 2000 4th International Conference on Algorithms and Architectures for Parallel Processing written by Andrzej Go?ci?ski and published by World Scientific. This book was released on 2000 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: ICA3PP 2000 was an important conference that brought together researchers and practitioners from academia, industry and governments to advance the knowledge of parallel and distributed computing. The proceedings constitute a well-defined set of innovative research papers in two broad areas of parallel and distributed computing: (1) architectures, algorithms and networks; (2) systems and applications.
Download or read book Sixth International Conferencew on Information Technology written by and published by Allied Publishers. This book was released on with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Algorithms and Architectures for Parallel Processing written by Sang-Soo Yeo and published by Springer. This book was released on 2010-05-29 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is our great pleasure to present the proceedings of the symposia and workshops on parallel and distributed computing and applications associated with the ICA3PP 2010 conference. These symposia and workshops provide vibrant opportunities for researchers and industry practitioners to share their research experience, original research results and practical development experiences in the new challenging research areas of parallel and distributed computing technologies and applications. It was the first time that the ICA3PP conference series added symposia and wo- shops to its program in order to provide a wide range of topics that extend beyond the main conferences. The goal was to provide a better coverage of emerging research areas and also forums for focused and stimulating discussions. With this objective in mind, we selected three workshops to accompany the ICA3PP 2010 conference: • FPDC 2010, the 2010 International Symposium on Frontiers of Parallel and Distributed Computing • HPCTA 2010, the 2010 International Workshop on High-Performance Computing, Technologies and Applications • M2A 2010, the 2010 International Workshop on Multicore and Mul- threaded Architectures and Algorithms Each of the symposia / workshops focused on a particular theme and complemented the spectrum of the main conference. All papers published in the workshops proce- ings were selected by the Program Committee on the basis of referee reports. Each paper was reviewed by independent referees who judged the papers for originality, quality, contribution, presentation and consistency with the theme of the workshops.
Download or read book Real Time Programming 1992 written by J.A. De La Puente and published by Elsevier. This book was released on 2017-02-21 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 47 papers in this volume provide a useful reference tool for the state-of-the-art research in real-time programming.
Download or read book Advances in Petri Net written by Tauseef Aized and published by BoD – Books on Demand. This book was released on 2010-09-27 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world is full of events which cause, end or affect other events. The study of these events, from a system point of view, is very important. Such systems are called discrete event dynamic systems and are of a subject of immense interest in a variety of disciplines, which range from telecommunication systems and transport systems to manufacturing systems and beyond. There has always been an intense need to formulate methods for modelling and analysis of discrete event dynamic systems. Petri net is a method which is based on a well-founded mathematical theory and has a wide application. This book is a collection of recent advances in theoretical and practical applications of the Petri net method and can be useful for both academia and industry related practitioners.
Download or read book Reliable Software Technologies Ada Europe 2003 written by Jean-Pierre Rosen and published by Springer Science & Business Media. This book was released on 2003-06-02 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: The refereed proceedings of the 8th International Conference on Reliable Software Technologies, Ada-Europe 2003, held in Toulouse, France in June 2003. The 29 revised full papers presented together with 3 invited papers were carefully reviewed and selected from numerous submissions. The papers are organized in topical sections on Ravenscar, language issues, static analysis, distributed information systems, software metrics, software components, formal specification, real-time kernel, software testing, and real-time systems design.
Download or read book Dependable Computing EDDC 3 written by Jan Hlavicka and published by Springer Science & Business Media. This book was released on 1999-09 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the Third European Dependable Computing Conference, EDCC-3, held in Prague, Czech Republic in September 1999. The 26 revised full papers presented were carefully reviewed and selected from 71 submissions. The papers are organized in topical sections on dependability modeling, protocols, fault injection, safety, hardware testing, built-in self-tests, networks and distributed systems, and software testing and self-checking.
Download or read book COTS Based Software Systems written by Xavier Franch and published by Springer. This book was released on 2005-01-18 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The theme “Build and Conquer” chosen for this year’s conference fully represents what we (the organizers) want to put across to the software community: software development is an engineering discipline, and not an artistic expression. Once we are ready to “build” our software systems using pieces previously builtin (similar to any other technology manufacturer), we will be able to “conquer” the software engineering process. If we take a look at other engineering disciplines such as car manufacturing, house appliances or aeronautics, we see that the final products are built through the integration of multiprovider commercial components. These components are successfully integrated and constitute an important part of the final product. Most software-related organizations still build software from scratch, omitting thousands of ready-built commercially available software components that could be used very effectively during the development phase. This year ICCBSS moves to Europe for the first time since the first conference took place in Orlando, FL, USA in 2002. The conference scope has enlarged over the years to include the Open Source community and Web Services technologies. The reason for this is that I believe both are considered components-off-the-shelf, so many of the characteristics of COTS are also applied to Open Source and Web Services. Due to this, we will enjoy the presence of keynote speakers and researchers presenting on these two topics for the first time.
Download or read book Kokuritsu Kokkai Toshokan shoz kagaku gijutsu kankei bun kaigiroku mokuroku written by Kokuritsu Kokkai Toshokan (Japan) and published by . This book was released on 1997 with total page 1596 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the IEEE Computer Society Workshop on Future Trends of Distributed Computing Systems written by and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Architecture and Design of Distributed Embedded Systems written by Bernd Kleinjohann and published by Springer. This book was released on 2013-04-18 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the decreasing production costs of IT systems, applications that had to be realised as expensive PCBs formerly, can now be realised as a system-on-chip. Furthermore, low cost broadband communication media for wide area communication as well as for the realisation of local distributed systems are available. Typically the market requires IT systems that realise a set of specific features for the end user in a given environment, so called embedded systems. Some examples for such embedded systems are control systems in cars, airplanes, houses or plants, information and communication devices like digital TV, mobile phones or autonomous systems like service- or edutainment robots. For the design of embedded systems the designer has to tackle three major aspects: The application itself including the man-machine interface, The (target) architecture of the system including all functional and non-functional constraints and, the design methodology including modelling, specification, synthesis, test and validation. The last two points are a major focus of this book. This book documents the high quality approaches and results that were presented at the International Workshop on Distributed and Parallel Embedded Systems (DIPES 2000), which was sponsored by the International Federation for Information Processing (IFIP), and organised by IFIP working groups WG10.3, WG10.4 and WG10.5. The workshop took place on October 18-19, 2000, in Schloß Eringerfeld near Paderborn, Germany. Architecture and Design of Distributed Embedded Systems is organised similar to the workshop. Chapters 1 and 4 (Methodology I and II) deal with different modelling and specification paradigms and the corresponding design methodologies. Generic system architectures for different classes of embedded systems are presented in Chapter 2. In Chapter 3 several design environments for the support of specific design methodologies are presented. Problems concerning test and validation are discussed in Chapter 5. The last two chapters include distribution and communication aspects (Chapter 6) and synthesis techniques for embedded systems (Chapter 7). This book is essential reading for computer science researchers and application developers.
Download or read book written by and published by . This book was released on 1997 with total page 1594 pages. Available in PDF, EPUB and Kindle. Book excerpt:
