Download or read book Extrusion Coating written by B. H. Gregory and published by Trafford Publishing. This book was released on 2008-05-28 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive study of extrusion coating technology describes the process and applications in detail, combining experimental data with computer modeling and the author's 30 years of experience. This methodology provides insight, clarity and assistance in problem solving, process optimization and new product development. The oportunities to exploit a wide range of polymers by the extrusion coater are discussed in detail. These include LDPE, HDPE, PP, ionomers, copolymers and blends and speciality materials, such as EVOH and PET. Everything you wanted to know about: Screw and die design for mono and coextrusion. Chill roll design and winders. Maximizing adhesion at high line speeds:- time in air gap and melt relaxation. Adhesion promotion:- corona, flame, ozone treatment and chemical primers. Feedblock and dual manifold coextrusion compared. Coextrusion:- control layer arrangement and eliminate interfacial instabilities. Optimize melt stability and minimize neck-in in air gap. Material selection:- polyethylenes, copolymers, ionomers, metallocenes, polypropylene etc. Substrates: pulp and paper, aluminium foil, plastic films etc. Applications for extrusion coatings and laminates. Minimize odor and off-taste and the scalping phenomenon in food packaging. Trouble shooting and many more insights. Target Audience: Engineers, marketers, technicians and students involved with the extrusion coating process. Table of Contents: The Extrusion Coating Process Equipment and Screw Design Die Design Stretching Flows and Neck-In Adhesion Coextrusion Adhesion Promotion Methods Polymers for Extrusion Coating: includes, coplymers, ionomers, PP, blends, metallocene PEs Speciality Polymers: EVOH and PET Improving organoleptic properties Substrates and Films for the EXtrusion Coater Extrusion Coated Products and Applications

Download or read book Rapra written by and published by iSmithers Rapra Publishing. This book was released on 1983 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Developments in the European Extrusion Industry written by R. Hudson and published by iSmithers Rapra Publishing. This book was released on 1995 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report provides the reader with not only a review of technology developments but also a consideration of end-use market factors.

Download or read book Tappi Journal written by and published by . This book was released on 1997 with total page 1258 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Volume Polymers in North America and Western Europe written by W. C. Kuhlke and published by iSmithers Rapra Publishing. This book was released on 2001 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Pulp Paper International written by and published by . This book was released on 1986 with total page 1110 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Multilayer Flexible Packaging written by John R. Wagner Jr. and published by William Andrew. This book was released on 2009-11-03 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and highly practical survey of the materials, hardware, processes and applications of flexible plastic films. Aimed at a wide audience of engineers, technicians, managers, purchasing agents and users, Multilayer Flexible Packaging provides a thorough introduction to the manufacturing and applications of flexible plastic films, covering: - Materials - Hardware and Processes - Multilayer film designs and applications The materials coverage includes detailed sections on polyethylene, polypropylene and additives. The dies used to produce multilayer films are explored in the hardware section, and the process engineering of film manufacture explained, with a particular focus on meeting specifications and targets. The section includes unique coverage of the problematic area of bending technology, providing a unique explanation of the issues involved in the blending of viscoelastic non-Newtonian polymeric materials. About the author John R. Wagner, Jr. is President of Crescent Associates, Inc., a consulting firm that specializes in plastic films and flexible packaging. He graduated from the University of Notre Dame with a BS and MS in Chemical Engineering.

Download or read book Liquid Film Coating written by P.M. Schweizer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: This multi-authored volume provides a comprehensive and in-depth account of the highly interdisciplinary science and technology of liquid film coating. The book covers fundamental principles from a wide range of scientific disciplines, including fluid mechanics aand transport phenomena, capillary hydrodynamics, surface and colloid science. The authors, all acknowledged eperts in their fields, represent a balance between industrial and academic points of view. Throughout the text, many case studies illustrate how scientific principles together with advanced experimental and theoretical methods are applied to develop and optimize manufacturing processes of eve increasing sophiatication and efficiency. In the first part of the book, the authors systematically recount the underlying physical principles and important material properties. The second part of the book gives a comprehensive overview of the most advanced experimental, mathematical and computational methods available today to investigate coating processes. The third part provides an overview and critical literature review for all major classes of liquid film coating processes of industrial importance.

Download or read book Plastics Materials written by J A Brydson and published by Elsevier. This book was released on 1999-10-26 with total page 949 pages. Available in PDF, EPUB and Kindle. Book excerpt: The seventh edition of this classic reference work once more provides a comprehensive overview of commercially available plastics materials. Bridging the gap between theory and practice, it enables scientists to understand the commercial implications of their work as well as providing technologists with a theoretical background.Since the previous edition, several new materials have been announced. Many of these materials result from metallocene catalyst technology. In addition, developments also continue with condensation polymers with several new polyester type materials of interest for bottle-blowing and/or degradable plastics. New phenolic-type resins have also been announced. As with previous editions, an explanation of the properties of these new materials in terms of their structure and morphology involving the principles laid down in the earlier chapters is presented.

Download or read book Hot Melt Extrusion written by Dennis Douroumis and published by John Wiley & Sons. This book was released on 2012-04-24 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hot-melt extrusion (HME) - melting a substance and forcing it through an orifice under controlled conditions to form a new material - is an emerging processing technology in the pharmaceutical industry for the preparation of various dosage forms and drug delivery systems, for example granules and sustained release tablets. Hot-Melt Extrusion: Pharmaceutical Applications covers the main instrumentation, operation principles and theoretical background of HME. It then focuses on HME drug delivery systems, dosage forms and clinical studies (including pharmacokinetics and bioavailability) of HME products. Finally, the book includes some recent and novel HME applications, scale -up considerations and regulatory issues. Topics covered include: principles and die design of single screw extrusion twin screw extrusion techniques and practices in the laboratory and on production scale HME developments for the pharmaceutical industry solubility parameters for prediction of drug/polymer miscibility in HME formulations the influence of plasticizers in HME applications of polymethacrylate polymers in HME HME of ethylcellulose, hypromellose, and polyethylene oxide bioadhesion properties of polymeric films produced by HME taste masking using HME clinical studies, bioavailability and pharmacokinetics of HME products injection moulding and HME processing for pharmaceutical materials laminar dispersive & distributive mixing with dissolution and applications to HME technological considerations related to scale-up of HME processes devices and implant systems by HME an FDA perspective on HME product and process understanding improved process understanding and control of an HME process with near-infrared spectroscopy Hot-Melt Extrusion: Pharmaceutical Applications is an essential multidisciplinary guide to the emerging pharmaceutical uses of this processing technology for researchers in academia and industry working in drug formulation and delivery, pharmaceutical engineering and processing, and polymers and materials science. This is the first book from our brand new series Advances in Pharmaceutical Technology. Find out more about the series here.

Download or read book Papers and Addresses Presented at the Annual Meeting of the Technical Association of the Pulp and Paper Industry written by and published by . This book was released on 1981 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Plunkett s Chemicals Coatings Plastics Industry Almanac Chemicals Coatings Plastics Industry Market Research Statistics Trends Leading Comp written by Jack W. Plunkett and published by Plunkett Research, Ltd.. This book was released on 2007-07 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chemicals manufacturing industry is a vibrant, global business that encompasses many important sectors: from commodity chemicals, to specialty chemicals to custom manufacturing. Key products include biochemicals, nanochemicals, polymers, petrochemicals, fertilizers, plastics, coatings, ceramics, solvents, additives, dyes and many other products basic to home and business needs. In addition, the pharmaceuticals industry is often included when discussing chemicals. Plunkett's Chemicals, Plastics & Coatings Industry Almanac 2008 covers such sectors, providing a market research tool for competitive intelligence, strategic planning, business analysis and even employment searches. Our coverage includes business trends analysis and industry statistics. The almanac also contains a chemicals, plastics and coatings business glossary and a listing of industry contacts, such as industry associations and government agencies. Next, we profile hundreds of leading companies. Our 400 company profiles include complete business descriptions and up to 27 executives by name and title. A CD-ROM accompanies the book version and enables you to search, filter, view and export selected companies and organizations -- a handy tool for creating mailing lists.

Download or read book Developments In Pressure Sensitive Products written by Istvan Benedek and published by CRC Press. This book was released on 2005-11-02 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first groundbreaking edition of Developments in Pressure-Sensitive Products was introduced in 1998, heavy research has resulted in substantial progress in the field. Fully updated and expanded to reflect this activity, Developments in Pressure-Sensitive Products, Second Edition provides a detailed overview of the entire range of pressure-

Download or read book Geosynthetics written by David I. Cook and published by iSmithers Rapra Publishing. This book was released on 2003 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geosynthetics often play critical roles in civil engineering and it is important that the materials in use can withstand the physical and chemical pressures of the environment. These range from resistance to leachates from landfill to resistance to root damage in soil liners, as well as standard properties such as resistance to creep, oxidation and UV light, and tensile strength. This Rapra Review Report discusses the polymers used in each category of geosynthetics, production methods, test methods and applications. The review is accompanied by around 400 abstracts from papers and books in the Rapra Polymer Library database, to facilitate further reading on this subject.

Download or read book Adhesion to Fluoropolymers written by Derek Brewis and published by iSmithers Rapra Publishing. This book was released on 2006 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Oral Drug Delivery for Modified Release Formulations written by Edmund S. Kostewicz and published by John Wiley & Sons. This book was released on 2022-04-26 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: ORAL DRUG DELIVERY FOR MODIFIED RELEASE FORMULATIONS Provides pharmaceutical development scientists with a detailed reference guide for the development of MR formulations Oral Drug Delivery for Modified Release Formulations is an up-to-date review of the key aspects of oral absorption from modified-release (MR) dosage forms. This edited volume provides in-depth coverage of the physiological factors that influence drug release and of the design and evaluation of MR formulations. Divided into three sections, the book begins by describing the gastrointestinal tract (GIT) and detailing the conditions and absorption processes occurring in the GIT that determine a formulation’s oral bioavailability. The second section explores the design of modified release formulations, covering early drug substance testing, the biopharmaceutics classification system, an array of formulation technologies that can be used for MR dosage forms, and more. The final section focuses on in vitro, in silico, and in vivo evaluation and regulatory considerations for MR formulations. Topics include biorelevant dissolution testing, preclinical evaluation, and physiologically-based pharmacokinetic modelling (PBPK) of in vivo behaviour. Featuring contributions from leading researchers with expertise in the different aspects of MR formulations, this volume: Provides authoritative coverage of physiology, physicochemical determinants, and in-vitro in-vivo correlation (IVIVC) Explains the different types of MR formulations and defines the key terms used in the field Discusses the present status of MR technologies and identifies current gaps in research Includes a summary of regulatory guidelines from both the US and the EU Shares industrial experiences and perspectives on the evaluation of MR dosage formulations Oral Drug Delivery for Modified Release Formulations is an invaluable reference and guide for researchers, industrial scientists, and graduate students in general areas of drug delivery including pharmaceutics, pharmaceutical sciences, biomedical engineering, polymer and materials science, and chemical and biochemical engineering.

Download or read book Industrial Applications for Intelligent Polymers and Coatings written by Majid Hosseini and published by Springer. This book was released on 2016-05-14 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive collaboration on intelligent polymers and coatings for industrial applications by worldwide researchers and specialists. The authors cover the basis and fundamental aspects of intelligent polymers and coatings, challenges, and potential mechanisms and properties. They include recent and emerging industrial applications in medical, smart textile design, oil and gas, electronic, aerospace, and automobile industries as well as other applications including microsystems, sensors, and actuators, among others. The authors discuss the potential for future research in these areas for improvement and growth of marketable applications of intelligent polymers and coatings.