Download or read book VLSI CAD Tools and Applications written by Wolfgang Fichtner and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: The summer school on VLSf GAD Tools and Applications was held from July 21 through August 1, 1986 at Beatenberg in the beautiful Bernese Oberland in Switzerland. The meeting was given under the auspices of IFIP WG 10. 6 VLSI, and it was sponsored by the Swiss Federal Institute of Technology Zurich, Switzerland. Eighty-one professionals were invited to participate in the summer school, including 18 lecturers. The 81 participants came from the following countries: Australia (1), Denmark (1), Federal Republic of Germany (12), France (3), Italy (4), Norway (1), South Korea (1), Sweden (5), United Kingdom (1), United States of America (13), and Switzerland (39). Our goal in the planning for the summer school was to introduce the audience into the realities of CAD tools and their applications to VLSI design. This book contains articles by all 18 invited speakers that lectured at the summer school. The reader should realize that it was not intended to publish a textbook. However, the chapters in this book are more or less self-contained treatments of the particular subjects. Chapters 1 and 2 give a broad introduction to VLSI Design. Simulation tools and their algorithmic foundations are treated in Chapters 3 to 5 and 17. Chapters 6 to 9 provide an excellent treatment of modern layout tools. The use of CAD tools and trends in the design of 32-bit microprocessors are the topics of Chapters 10 through 16. Important aspects in VLSI testing and testing strategies are given in Chapters 18 and 19.

Download or read book VLSI Design and Test written by Brajesh Kumar Kaushik and published by Springer. This book was released on 2017-12-21 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 21st International Symposium on VLSI Design and Test, VDAT 2017, held in Roorkee, India, in June/July 2017. The 48 full papers presented together with 27 short papers were carefully reviewed and selected from 246 submissions. The papers were organized in topical sections named: digital design; analog/mixed signal; VLSI testing; devices and technology; VLSI architectures; emerging technologies and memory; system design; low power design and test; RF circuits; architecture and CAD; and design verification.

Download or read book Spectral Techniques in VLSI CAD written by Mitchell Aaron Thornton and published by Springer Science & Business Media. This book was released on 2001-07-31 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spectral Techniques in VLSI CAD have become a subject of renewed interest in the design automation community due to the emergence of new and efficient methods for the computation of discrete function spectra. In the past, spectral computations for digital logic were too complex for practical implementation. The use of decision diagrams for spectral computations has greatly reduced this obstacle allowing for the development of new and useful spectral techniques for VLSI synthesis and verification. Several new algorithms for the computation of the Walsh, Reed-Muller, arithmetic and Haar spectra are described. The relation of these computational methods to traditional ones is also provided. Spectral Techniques in VLSI CAD provides a unified formalism of the representation of bit-level and word-level discrete functions in the spectral domain and as decision diagrams. An alternative and unifying interpretation of decision diagram representations is presented since it is shown that many of the different commonly used varieties of decision diagrams are merely graphical representations of various discrete function spectra. Viewing various decision diagrams as being described by specific sets of transformation functions not only illustrates the relationship between graphical and spectral representations of discrete functions, but also gives insight into how various decision diagram types are related. Spectral Techniques in VLSI CAD describes several new applications of spectral techniques in discrete function manipulation including decision diagram minimization, logic function synthesis, technology mapping and equivalence checking. The use of linear transformations in decision diagram size reduction is described and the relationship to the operation known as spectral translation is described. Several methods for synthesizing digital logic circuits based on a subset of spectral coefficients are described. An equivalence checking approach for functional verification is described based upon the use of matching pairs of Haar spectral coefficients.

Download or read book Machine Learning in VLSI Computer Aided Design written by Ibrahim (Abe) M. Elfadel and published by Springer. This book was released on 2019-03-15 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with an up-to-date account of the use of machine learning frameworks, methodologies, algorithms and techniques in the context of computer-aided design (CAD) for very-large-scale integrated circuits (VLSI). Coverage includes the various machine learning methods used in lithography, physical design, yield prediction, post-silicon performance analysis, reliability and failure analysis, power and thermal analysis, analog design, logic synthesis, verification, and neuromorphic design. Provides up-to-date information on machine learning in VLSI CAD for device modeling, layout verifications, yield prediction, post-silicon validation, and reliability; Discusses the use of machine learning techniques in the context of analog and digital synthesis; Demonstrates how to formulate VLSI CAD objectives as machine learning problems and provides a comprehensive treatment of their efficient solutions; Discusses the tradeoff between the cost of collecting data and prediction accuracy and provides a methodology for using prior data to reduce cost of data collection in the design, testing and validation of both analog and digital VLSI designs. From the Foreword As the semiconductor industry embraces the rising swell of cognitive systems and edge intelligence, this book could serve as a harbinger and example of the osmosis that will exist between our cognitive structures and methods, on the one hand, and the hardware architectures and technologies that will support them, on the other....As we transition from the computing era to the cognitive one, it behooves us to remember the success story of VLSI CAD and to earnestly seek the help of the invisible hand so that our future cognitive systems are used to design more powerful cognitive systems. This book is very much aligned with this on-going transition from computing to cognition, and it is with deep pleasure that I recommend it to all those who are actively engaged in this exciting transformation. Dr. Ruchir Puri, IBM Fellow, IBM Watson CTO & Chief Architect, IBM T. J. Watson Research Center

Download or read book Evolutionary Algorithms for VLSI CAD written by Rolf Drechsler and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: In VLSI CAD, difficult optimization problems have to be solved on a constant basis. Various optimization techniques have been proposed in the past. While some of these methods have been shown to work well in applications and have become somewhat established over the years, other techniques have been ignored. Recently, there has been a growing interest in optimization algorithms based on principles observed in nature, termed Evolutionary Algorithms (EAs). Evolutionary Algorithms in VLSI CAD presents the basic concepts of EAs, and considers the application of EAs in VLSI CAD. It is the first book to show how EAs could be used to improve IC design tools and processes. Several successful applications from different areas of circuit design, like logic synthesis, mapping and testing, are described in detail. Evolutionary Algorithms in VLSI CAD consists of two parts. The first part discusses basic principles of EAs and provides some easy-to-understand examples. Furthermore, a theoretical model for multi-objective optimization is presented. In the second part a software implementation of EAs is supplied together with detailed descriptions of several EA applications. These applications cover a wide range of VLSI CAD, and different methods for using EAs are described. Evolutionary Algorithms in VLSI CAD is intended for CAD developers and researchers as well as those working in evolutionary algorithms and techniques supporting modern design tools and processes.

Download or read book Binary Decision Diagrams and Applications for VLSI CAD written by Shin-ichi Minato and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: Symbolic Boolean manipulation using binary decision diagrams (BDDs) has been successfully applied to a wide variety of tasks, particularly in very large scale integration (VLSI) computer-aided design (CAD). The concept of decision graphs as an abstract representation of Boolean functions dates back to the early work by Lee and Akers. In the last ten years, BDDs have found widespread use as a concrete data structure for symbolic Boolean manipulation. With BDDs, functions can be constructed, manipulated, and compared by simple and efficient graph algorithms. Since Boolean functions can represent not just digital circuit functions, but also such mathematical domains as sets and relations, a wide variety of CAD problems can be solved using BDDs. `Binary Decision Diagrams and Applications for VLSI CAD provides valuable information for both those who are new to BDDs as well as to long time aficionados.' -from the Foreword by Randal E. Bryant. `Over the past ten years ... BDDs have attracted the attention of many researchers because of their suitability for representing Boolean functions. They are now widely used in many practical VLSI CAD systems. ... this book can serve as an introduction to BDD techniques and ... it presents several new ideas on BDDs and their applications. ... many computer scientists and engineers will be interested in this book since Boolean function manipulation is a fundamental technique not only in digital system design but also in exploring various problems in computer science.' - from the Preface by Shin-ichi Minato.

Download or read book VLSI Design and Test written by Anirban Sengupta and published by Springer. This book was released on 2019-08-17 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 23st International Symposium on VLSI Design and Test, VDAT 2019, held in Indore, India, in July 2019. The 63 full papers were carefully reviewed and selected from 199 submissions. The papers are organized in topical sections named: analog and mixed signal design; computing architecture and security; hardware design and optimization; low power VLSI and memory design; device modelling; and hardware implementation.

Download or read book VLSI Physical Design From Graph Partitioning to Timing Closure written by Andrew B. Kahng and published by Springer Science & Business Media. This book was released on 2011-01-27 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and optimization of integrated circuits are essential to the creation of new semiconductor chips, and physical optimizations are becoming more prominent as a result of semiconductor scaling. Modern chip design has become so complex that it is largely performed by specialized software, which is frequently updated to address advances in semiconductor technologies and increased problem complexities. A user of such software needs a high-level understanding of the underlying mathematical models and algorithms. On the other hand, a developer of such software must have a keen understanding of computer science aspects, including algorithmic performance bottlenecks and how various algorithms operate and interact. "VLSI Physical Design: From Graph Partitioning to Timing Closure" introduces and compares algorithms that are used during the physical design phase of integrated-circuit design, wherein a geometric chip layout is produced starting from an abstract circuit design. The emphasis is on essential and fundamental techniques, ranging from hypergraph partitioning and circuit placement to timing closure.

Download or read book AI Technology written by Fumio Mizoguchi and published by IOS Press. This book was released on 1990 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book VLSI SoC Design Trends written by Andrea Calimera and published by Springer Nature. This book was released on 2021-07-14 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains extended and revised versions of the best papers presented at the 28th IFIP WG 10.5/IEEE International Conference on Very Large Scale Integration, VLSI-SoC 2020, held in Salt Lake City, UT, USA, in October 2020.* The 16 full papers included in this volume were carefully reviewed and selected from the 38 papers (out of 74 submissions) presented at the conference. The papers discuss the latest academic and industrial results and developments as well as future trends in the field of System-on-Chip (SoC) design, considering the challenges of nano-scale, state-of-the-art and emerging manufacturing technologies. In particular they address cutting-edge research fields like low-power design of RF, analog and mixed-signal circuits, EDA tools for the synthesis and verification of heterogenous SoCs, accelerators for cryptography and deep learning and on-chip Interconnection system, reliability and testing, and integration of 3D-ICs. *The conference was held virtually.

Download or read book Proceedings written by and published by . This book was released on 1990 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book VLSI SoC Opportunities and Challenges Beyond the Internet of Things written by Michail Maniatakos and published by Springer. This book was released on 2019-05-16 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains extended and revised versions of the best papers presented at the 25th IFIP WG 10.5/IEEE International Conference on Very Large Scale Integration, VLSI-SoC 2017, held in Abu Dhabi, United Arab Emirates, in August 2017. The 11 papers included in this book were carefully reviewed and selected from the 33 full papers presented at the conference. The papers cover a wide range of topics in VLSI technology and advanced research. They address the latest scientific and industrial results and developments as well as future trends in the field of System-on-Chip (SoC) Design. On the occasion of the silver jubilee of the VLSI-SoC conference series the book also includes a special chapter that presents the history of the VLSI-SoC series of conferences and its relation with VLSI-SoC evolution since the early 80s up to the present.

Download or read book VLSI Design and Test written by Manoj Singh Gaur and published by Springer. This book was released on 2013-12-13 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 17th International Symposium on VLSI Design and Test, VDAT 2013, held in Jaipur, India, in July 2013. The 44 papers presented were carefully reviewed and selected from 162 submissions. The papers discuss the frontiers of design and test of VLSI components, circuits and systems. They are organized in topical sections on VLSI design, testing and verification, embedded systems, emerging technology.

Download or read book Principles and Practice of Constraint Programming CP 2009 written by Ian P. Gent and published by Springer. This book was released on 2009-09-19 with total page 861 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers presented at CP 2009: The 15th International Conference on Principles and Practice of Constraint Programming. It was held from September 20–24, 2009 at the Rectory of the New University of Lisbon, Portugal. Everyone involved with the conference thanks our sponsors for their support. There were 128 submissions to the research track, of which 53 were accepted for a rate of 41.4%. Each submission was reviewed by three reviewers, with a small number of additional reviews obtained in exceptional cases. Each review waseitherbyaProgrammeCommitteemember,orbyacolleagueinvitedtohelp by a committee member thanks to their particular expertise. Papers submitted as long papers were accepted at full length or not at all. It is important to note that papers submitted as short papers were held to the same high standards of qualityas long papers. There is thus no distinction in these proceedings between long and short papers, except of course the number of pages they occupy. As it happens, the acceptancerates of short and long papers wereverysimilar indeed. Therewere13submissionstotheapplicationtrack,ofwhich8wereaccepted, fora rateof61.5%.Papersunderwentthe samereviewprocessasregularpapers, and there was not a separate committee for reviewing application track papers. However, papers in the application track were not required to be original or novel research, but to be original and novel as an application of constraints.

Download or read book Computer Aided Design and Design Automation written by Wai-Kai Chen and published by CRC Press. This book was released on 2018-03-12 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of The Circuits and Filters Handbook, Third Edition focuses on computer aided design and design automation. In the first part of the book, international contributors address topics such as the modeling of circuit performances, symbolic analysis methods, numerical analysis methods, design by optimization, statistical design optimization, and physical design automation. In the second half of the text, they turn their attention to RF CAD, high performance simulation, formal verification, RTK behavioral synthesis, system-level design, an Internet-based micro-electronic design automation framework, performance modeling, and embedded computing systems design.

Download or read book SOC System on a Chip Testing for Plug and Play Test Automation written by Krishnendu Chakrabarty and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: System-on-a-Chip (SOC) integrated circuits composed of embedded cores are now commonplace. Nevertheless, there remain several roadblocks to rapid and efficient system integration. Test development is seen as a major bottleneck in SOC design and manufacturing capabilities. Testing SOCs is especially challenging in the absence of standardized test structures, test automation tools, and test protocols. In addition, long interconnects, high density, and high-speed designs lead to new types of faults involving crosstalk and signal integrity. SOC (System-on-a-Chip) Testing for Plug and Play Test Automation is an edited work containing thirteen contributions that address various aspects of SOC testing. SOC (System-on-a-Chip) Testing for Plug and Play Test Automation is a valuable reference for researchers and students interested in various aspects of SOC testing.

Download or read book Evolvable Components written by Lukas Sekanina and published by Springer Science & Business Media. This book was released on 2003-10-23 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the beginning of the 1990s research started in how to combine soft comput ing with reconfigurable hardware in a quite unique way. One of the methods that was developed has been called evolvable hardware. Thanks to evolution ary algorithms researchers have started to evolve electronic circuits routinely. A number of interesting circuits - with features unreachable by means of con ventional techniques - have been developed. Evolvable hardware is quite pop ular right now; more than fifty research groups are spread out over the world. Evolvable hardware has become a part of the curriculum at some universi ties. Evolvable hardware is being commercialized and there are specialized conferences devoted to evolvable hardware. On the other hand, surprisingly, we can feel the lack of a theoretical background and consistent design methodology in the area. Furthermore, it is quite difficult to implement really innovative and practically successful evolvable systems using contemporary digital reconfigurable technology.